coreboot-kgpe-d16/src/southbridge/intel/lynxpoint/Makefile.inc
Duncan Laurie 0a7c49efa0 HDA: Enable Mini-HDA and fix up PCH-HDA init
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0
which uses the same verb table init sequence as the southbridge.

In order to avoid two copies of the verb table loading code I
separated out the HDA verb table functions into a file that can
be re-used and then added a minihd driver to the haswell northbridge.

The minihd verb table is the same across devices so it can live
within the minihd driver rather than needing to be specified in
each separate mainboard.

I also fixed up the driver for lynxpoint HDA by following the
reference code.

Without HDMI cable plugged in driver does not find any codec,
and it does not seem to re-probe when HDMI is connected.  We may
be missing kernel patches for this.

hda-intel 0000:00:03.0: no codecs found!

With a basic kernel patch to add 0x0a0c device ID to HDA driver
and with HDMI cable connected it is much happier:

snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11

Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12 22:11:46 +01:00

86 lines
2.8 KiB
Makefile

##
## This file is part of the coreboot project.
##
## Copyright (C) 2010 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
# Run an intermediate step when producing coreboot.rom
# that adds additional components to the final firmware
# image outside of CBFS
# FIXME, uncomment as soon as we have ME firmware in the blobs repo
# INTERMEDIATE:=lynxpoint_add_me
ramstage-y += pch.c
ramstage-y += azalia.c
ramstage-y += lpc.c
ramstage-y += pci.c
ramstage-y += pcie.c
ramstage-y += sata.c
ramstage-y += usb_ehci.c
ramstage-y += usb_xhci.c
ramstage-y += me_9.x.c
ramstage-y += smbus.c
ramstage-y += hda_verb.c
ramstage-$(CONFIG_INTEL_LYNXPOINT_LP) += serialio.c
ramstage-y += rcba.c
ramstage-y += me_status.c
ramstage-y += reset.c
ramstage-y += watchdog.c
ramstage-y += acpi.c
ramstage-$(CONFIG_ALT_CBFS_LOAD_PAYLOAD) += spi_loading.c
ramstage-$(CONFIG_ELOG) += elog.c
ramstage-y += spi.c
smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c pmutil.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c finalize.c pch.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
romstage-y += early_usb.c early_smbus.c early_me.c me_status.c early_pch.c
romstage-y += reset.c early_spi.c rcba.c
ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y)
romstage-y += lp_gpio.c
ramstage-y += lp_gpio.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += lp_gpio.c
else
romstage-y += gpio.c
ramstage-y += gpio.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += gpio.c
endif
lynxpoint_add_me: $(obj)/coreboot.pre $(IFDTOOL)
printf " DD Adding Intel Firmware Descriptor\n"
dd if=$(CONFIG_IFD_BIN_PATH) \
of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
printf " IFDTOOL me.bin -> coreboot.pre\n"
$(objutil)/ifdtool/ifdtool \
-i ME:$(CONFIG_ME_BIN_PATH) \
$(obj)/coreboot.pre
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
printf " IFDTOOL Locking Management Engine\n"
$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
else
printf " IFDTOOL Unlocking Management Engine\n"
$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
endif
PHONY += lynxpoint_add_me