ce04a42db9
- Drop vanished issue on PCIe warning - Drop TODO section, since the TODOs are done - Document the jumper J6, that was not documented by the vendor. Its function has been determined by dissecting a dead board. - The flash is not socketed anymore. Drop that note and compress the whole paragraph. Also add a note about flashing via the BMC web interface. Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
4 KiB
4 KiB
Supermicro X11SSM-F
This section details how to run coreboot on the Supermicro X11SSM-F.
Flashing coreboot
The board can be flashed externally. FTDI FT2232H and FT232H based programmers worked. For this, one needs to add a diode between VCC and the flash chip. The flash IC MX25L12873F can be found near PCH PCIe Slot 4.
Flashing is also possible through the BMC web interface, when a valid license was entered.
BMC (IPMI)
This board has an ASPEED AST2400, which has BMC/IPMI functionality. The BMC firmware resides in a 32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a MX25L25635F.
Disabling LAN firmware
To disable the proprietary LAN firmware, the undocumented jumper J6 can be set to 2-3.
Tested and working
- GRUB2 payload with Debian testing and kernel 5.2
- ECC ram (Linux' ie31200 driver works)
- USB ports
- Ethernet
- SATA ports
- RS232 external
- PCIe slots
- BMC (IPMI)
- VGA on Aspeed
- TPM on TPM expansion header
Known issues
- See general issue section
- LNXTHERM missing
- S3 resume not working
Technology
+------------------+--------------------------------------------------+
| CPU | Intel Kaby Lake |
+------------------+--------------------------------------------------+
| PCH | Intel C236 |
+------------------+--------------------------------------------------+
| Coprocessor | Intel SPS (server version of the ME) |
+------------------+--------------------------------------------------+
| Super I/O | ASPEED AST2400 |
+------------------+--------------------------------------------------+
| Ethernet | 2x Intel I210-AT 1 GbE |
| | 1x dedicated BMC |
+------------------+--------------------------------------------------+
| PCIe slots | 1x 3.0 x8 |
| | 1x 3.0 x8 (in x16) |
| | 2x 3.0 x4 (in x8) |
+------------------+--------------------------------------------------+
| USB slots | 2x USB 2.0 (ext) |
| | 2x USB 3.0 (ext) |
| | 1x USB 3.0 (int) |
| | 1x dual USB 3.0 header |
| | 2x dual USB 2.0 header |
+------------------+--------------------------------------------------+
| SATA slots | 8x S-ATA III |
+------------------+--------------------------------------------------+
| Other slots | 1x RS232 (ext) |
| | 1x RS232 header |
| | 1x TPM header |
| | 1x Power SMB header |
| | 5x PWM Fan connector |
| | 2x I-SGPIO |
| | 2x S-ATA DOM Power connector |
| | 1x XDP Port |
| | 1x External BMC I2C Header (for IPMI card) |
| | 1x Chassis Intrusion Header |
+------------------+--------------------------------------------------+