d55fa332d8
There is no need that the tutorial for flashing firmware has its own point in the main menu. Thus, move it to the tutorial section. Change-Id: Ife6d97254af4c006fe01480a78c76303f9cb34bb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
22 lines
751 B
Markdown
22 lines
751 B
Markdown
# Lenovo X1
|
|
|
|
## Flashing instructions
|
|
|
|
|
|
|
|
You have to remove the keyboard in order to access the flash IC (the chip
|
|
inside the red circle on the picture above), as it is under the wider
|
|
cable (already detached from MB in the picture) connecting the keyboard
|
|
to the mainboard.
|
|
|
|
The flash IC can be a SOIC-8 one or a WSON-8 one, and may be covered with
|
|
a piece of insulation tape.
|
|
|
|
For more details have a look at [T420 / T520 / X220 / T420s / W520 common] and
|
|
the general [flashing tutorial].
|
|
|
|
Steps to access the flash IC are described here [X2xx series].
|
|
|
|
[X2xx series]: x2xx_series.md
|
|
[flashing tutorial]: ../../tutorial/flashing_firmware/ext_power.md
|
|
[T420 / T520 / X220 / T420s / W520 common]: Sandy_Bridge_series.md
|