No description
fd50b7c3d7
The ACPI MCFG table is generated with a static end bus number of 255, which expects that the reserved range in E820 is 256MB. However the actual MCFG range is configurable with Kconfig, so these two values may not match when the OS tries to determine the range: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge Instead of forcing the end bus number to be 255 use the Kconfig value to set it based on the current configuration. Tested on a fizz device to ensure that the kernel no longer complains: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) Change-Id: I999ea9b72b9deba5f27dd692faa0408427a0bf89 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/24974 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> |
||
|---|---|---|
| 3rdparty | ||
| configs | ||
| Documentation | ||
| payloads | ||
| src | ||
| util | ||
| .checkpatch.conf | ||
| .clang-format | ||
| .gitignore | ||
| .gitmodules | ||
| .gitreview | ||
| COPYING | ||
| gnat.adc | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc | ||
| README | ||
| toolchain.inc | ||
------------------------------------------------------------------------------- coreboot README ------------------------------------------------------------------------------- coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload. With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required. coreboot was formerly known as LinuxBIOS. Payloads -------- After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot. See https://www.coreboot.org/Payloads for a list of supported payloads. Supported Hardware ------------------ coreboot supports a wide range of chipsets, devices, and mainboards. For details please consult: * https://www.coreboot.org/Supported_Motherboards * https://www.coreboot.org/Supported_Chipsets_and_Devices Build Requirements ------------------ * make * gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case). * iasl (for targets with ACPI support) * pkg-config * libssl-dev (openssl) Optional: * doxygen (for generating/viewing documentation) * gdb (for better debugging facilities on some targets) * ncurses (for 'make menuconfig' and 'make nconfig') * flex and bison (for regenerating parsers) Building coreboot ----------------- Please consult https://www.coreboot.org/Build_HOWTO for details. Testing coreboot Without Modifying Your Hardware ------------------------------------------------ If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU. Please see https://www.coreboot.org/QEMU for details. Website and Mailing List ------------------------ Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website: https://www.coreboot.org You can contact us directly on the coreboot mailing list: https://www.coreboot.org/Mailinglist Copyright and License --------------------- The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details. coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details. This makes the resulting coreboot images licensed under the GPL, version 2.