coreboot-kgpe-d16/Documentation/releases/coreboot-4.12-relnotes.md

3.2 KiB

Upcoming release - coreboot 4.12

The 4.12 release is planned for April 2020

Update this document with changes that should be in the release notes.

  • Please use Markdown.
  • See the past few release notes for the general format.
  • The chip and board additions and removals will be updated right before the release, so those do not need to be added.

Deprecations

For the 4.12 release a few features on x86 became mandatory. These are relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK.

Relocatable ramstage

Relocatable stages are a feature implemented only on x86, where stages can be relocated at runtime. This is used to place ramstage in a better location that does not collide with memory the OS or the payload tends to use. The rationale behind making this mandatory is that you always want cbmem to be cached so it's a good location to run ramstage from. It avoids using lower memory altogether so the OS can make use of it and no backing up needs to happen on S3 resume.

Postcar stage

With Postcar stage tearing down Cache-as-Ram is done in a separate stage. This means that romstage has a clean program boundary and that all variables in romstage can be accessed via their linked addresses without runtime resolution. There is no need to link global and static variables via the CAR_GLOBAL macro and no need to access them with car_set/get_var/ptr functions.

C_ENVIRONMENT_BOOTBLOCK

Historically the bootblock on x86 platforms has been compiled with romcc. This means that the generated code only uses CPU registers and therefore no stack. This 20K+ LOC compiler is limited and hard to maintain and so is the code that one has to write in that environment. A different solution is to set up Cache-as-Ram in the bootblock and run GCC compiled code in the bootblock. The advantages are increased flexibility and consistency with other architectures as well as other stages: e.g. printing to console is possible and VBOOT can run before romstage, making romstage updatable via RW FMAP regions.

Platforms dropped from master

The following platforms did not implement those feature are dropped from master to allow the master branch to move on:

  • AMDFAM10
  • all FSP1.0 platforms: BROADWELL_DE, FSP_BAYTRAIL, RANGELEY
  • VIA VX900
  • TODO (AMD?)

In particular on FSP1.0 it is impossible to implement POSTCAR stage. The reason is that FSP1.0 relocates the CAR region to the HOB before returning to coreboot. This means that after FSP returns to coreboot accessing variables via their original address is not possible. One way of obtaining that behavior would be to set up Cache-as-Ram again (but with open source code) and copy the relocated data from the HOB there. This solution is deemed too hacky. Maybe a lesson can be learned from this: blobs should not interfere with the execution environment, as this makes proper integration much harder.

4.11_branch

Given that some platforms supported by FSP1.0 are being produced and popular, the 4.11 release was made into a branch in which further development can happen.

Significant changes

SMMSTORE is now production ready

See smmstore for the documentation on the API.

Add significant changes here