coreboot-kgpe-d16/util/flashrom
Peter Stuge cd7e9b55dd flashrom: Fix broken flash chip base address logic
Elan SC520 requries us to deal with flash chip base addresses at locations
other than top of 4GB. The logic for that was incorrectly triggered also when
a board had more than one flash chip. This patch will honor flashbase only when
probing for the first flash chip on the board, and look at top of 4GB for later
chips.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-09 20:26:14 +00:00
..
82802ab.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
COPYING Add a copy of the GPL in the flashrom repository as it's an independent 2007-09-08 14:36:01 +00:00
Makefile flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE 2009-01-26 06:42:02 +00:00
README flashrom: Document exit() codes introduced in r3907. 2009-01-26 02:20:56 +00:00
am29f040b.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
board_enable.c flashrom: MSI MS-7046 board enable 2009-02-02 22:55:26 +00:00
cbtable.c flashrom: Darwin / Mac OS X 2009-01-26 01:23:31 +00:00
chipset_enable.c Following patch fixes VIA SPI (VT8237S). It needs to have opcodes 2009-02-01 18:40:50 +00:00
coreboot_tables.h rename linuxbios_* files in utils repository. 2008-01-18 16:17:44 +00:00
en29f002a.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
flash.h flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE 2009-01-26 06:42:02 +00:00
flashchips.c flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE 2009-01-26 06:42:02 +00:00
flashrom.8 flashrom: Document exit() codes introduced in r3907. 2009-01-26 02:20:56 +00:00
flashrom.c flashrom: Fix broken flash chip base address logic 2009-02-09 20:26:14 +00:00
ichspi.c flashrom: Fix one dead increment and one dead assignment as found by clang. 2009-01-26 15:19:43 +00:00
it87spi.c flashrom: IT8718F works just like IT8716F. 2009-01-12 21:28:03 +00:00
jedec.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
layout.c flashrom: Check return value of fscanf()/fwrite()/fread() 2009-01-12 21:00:35 +00:00
m29f002.c flashrom: Fix one dead increment and one dead assignment as found by clang. 2009-01-26 15:19:43 +00:00
m29f400bt.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
mx29f002.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
physmap.c flashrom: exit(2) on /dev/mem open() failure and exit(3) on mmap() failure. 2009-01-26 02:04:19 +00:00
pm49fl00x.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
sb600spi.c Copyright update by Jason Wang for freshly written sb600 code. 2008-11-29 15:07:15 +00:00
sharplhf00l04.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
spi.c flashrom: SST25VF040B using 0x90 identification and AAI write. 2009-01-26 03:37:40 +00:00
spi.h Declare special commands to support the Atmel AT25F512A. 2008-11-28 23:47:55 +00:00
sst28sf040.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
sst39sf020.c I looked at the datasheet and erase_sector_39sf020() is totally and 2008-05-16 21:11:53 +00:00
sst49lf040.c Reduce serial output, otherwise flashing will fail very often (trivial). 2008-10-21 22:09:02 +00:00
sst49lfxxxc.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
sst_fwhub.c check whether SST FWH chip was successfully erased on flashchip -E, too 2008-03-16 19:44:13 +00:00
stm50flw0x0x.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
udelay.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
w29ee011.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
w39v040c.c flashrom: Beautify flash chip ID verbose printout a little, always use %02x. 2009-01-25 23:52:45 +00:00
w39v080fa.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
w49f002u.c Some cosmetic cleanups in the flashrom code and output. 2007-10-17 23:55:15 +00:00
wbsio_spi.c flashrom: Winbond SuperIO SPI driver. 2009-01-26 03:08:45 +00:00

README

-------------------------------------------------------------------------------
Flashrom README
-------------------------------------------------------------------------------

Flashrom is a universal flash programming utility for DIP, PLCC, or SPI
flash ROM chips. It can be used to flash BIOS/coreboot/firmware images.

(see http://coreboot.org for details on coreboot)


Build Requirements
------------------

To build the flashrom utility you need to install the following packages:

* pciutils
* pciutils-devel / pciutils-dev / libpci-dev
* zlib-devel / zlib1g-dev


Usage
-----

 $ flashrom [-rwvEVfLhR] [-c chipname] [-s exclude_start] [-e exclude_end]
            [-m [vendor:]part] [-l file.layout] [-i imagename] [file]
   -r | --read:                      read flash and save into file
   -w | --write:                     write file into flash (default when
                                     file is specified)
   -v | --verify:                    verify flash against file
   -E | --erase:                     erase flash device
   -V | --verbose:                   more verbose output
   -c | --chip <chipname>:           probe only for specified flash chip
   -s | --estart <addr>:             exclude start position
   -e | --eend <addr>:               exclude end postion
   -m | --mainboard <[vendor:]part>: override mainboard settings
   -f | --force:                     force write without checking image
   -l | --layout <file.layout>:      read rom layout from file
   -i | --image <name>:              only flash image name from flash layout
   -L | --list-supported:            print supported devices
   -h | --help:                      print this help text
   -R | --version:                   print the version (release)

 If no file is specified, then all that happens
 is that flash info is dumped and the flash chip is set to writable.


Exit status
-----------
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.


coreboot Table and Mainboard Identification
--------------------------------------------

Flashrom reads the coreboot table to determine the current mainboard
(parse DMI as well in future?). If no coreboot table could be read
or if you want to override these values, you can specify -m, e.g.:

 $ flashrom -w --mainboard AGAMI:ARUMA agami_aruma.rom

See the 'Supported mainboards' section in the output of 'flashrom -L' for
a list of boards which require the specification of the board name, if no
coreboot table is found.


ROM Layout Support
------------------

Flashrom supports ROM layouts. This allows you to flash certain parts of
the flash chip only. A ROM layout file looks like follows:

  00000000:00008fff gfxrom
  00009000:0003ffff normal
  00040000:0007ffff fallback

  i.e.:
  startaddr:endaddr name

  All addresses are offsets within the file, not absolute addresses!
  
If you only want to update the normal image in a ROM you can say:

  flashrom -w --layout rom.layout --image normal agami_aruma.rom
     
To update normal and fallback but leave the VGA BIOS alone, say:

  flashrom -w -l rom.layout -i normal -i fallback agami_aruma.rom
 
Currently overlapping sections are not supported.

ROM layouts should replace the -s and -e option since they are more 
flexible and they should lead to a ROM update file format with the 
ROM layout and the ROM image in one file (cpio, zip or something?).


Disk on Chip support
--------------------

Disk on Chip support was removed from flashrom in r3382. It had already
been disabled by default in flashrom for several years because the code
was considered unstable and incomplete. The products intended to work
have been End-Of-Lifed by the manufacturer for a long time.


Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------

Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, and mainboards.

See also http://coreboot.org/Flashrom for more details.