No description
ff8bf410d9
As per ME BWG, there are two mechanism to generate a Global Reset (resets both host and Intel ME), one is through CF9h IO write of 6h or Eh with "CF9h Global Reset" (CF9GR) bit set, PMC PCI offset ACh[20]. Another is to issue the Global Reset MEI message. Because any attempts to cause global reset without synchronizing the two sides might cause unwanted side effects, such as unwritten flash data that will get destroyed if the host were to cause a global reset without informing Intel ME firmware, the recommended method is to send a Global Reset MEI message when the following conditions are met: The PCH chipset firmware just needs to complete the Intel ME Interface #1 initialization and check the Intel ME HFSTS state if Intel ME is not in ERROR state and is accepting MEI commands then firmware should be able to use Global Reset MEI message to trigger global reset. Furthermore, if Intel ME is in ERROR state, BIOS can use I/O 0xCF9 write of 0x06 or 0x0E command with PCH ETR3 register bit [20] to perform the global reset. BUG=none BRANCH=none TEST=Verified Global Reset MEI message is able to perform platform global issue in ME good state. Change-Id: If326a137eeadaa695668b76b84c510e12c546024 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16902 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> |
||
---|---|---|
3rdparty | ||
Documentation | ||
payloads | ||
src | ||
util | ||
.checkpatch.conf | ||
.clang-format | ||
.gitignore | ||
.gitmodules | ||
.gitreview | ||
COPYING | ||
gnat.adc | ||
MAINTAINERS | ||
Makefile | ||
Makefile.inc | ||
README | ||
toolchain.inc |
------------------------------------------------------------------------------- coreboot README ------------------------------------------------------------------------------- coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload. With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required. coreboot was formerly known as LinuxBIOS. Payloads -------- After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot. See http://www.coreboot.org/Payloads for a list of supported payloads. Supported Hardware ------------------ coreboot supports a wide range of chipsets, devices, and mainboards. For details please consult: * http://www.coreboot.org/Supported_Motherboards * http://www.coreboot.org/Supported_Chipsets_and_Devices Build Requirements ------------------ * make * gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case). * iasl (for targets with ACPI support) Optional: * doxygen (for generating/viewing documentation) * gdb (for better debugging facilities on some targets) * ncurses (for 'make menuconfig' and 'make nconfig') * flex and bison (for regenerating parsers) Building coreboot ----------------- Please consult http://www.coreboot.org/Build_HOWTO for details. Testing coreboot Without Modifying Your Hardware ------------------------------------------------ If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU. Please see http://www.coreboot.org/QEMU for details. Website and Mailing List ------------------------ Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website: http://www.coreboot.org You can contact us directly on the coreboot mailing list: http://www.coreboot.org/Mailinglist Copyright and License --------------------- The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details. coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details. This makes the resulting coreboot images licensed under the GPL, version 2.