249 lines
7.1 KiB
C
249 lines
7.1 KiB
C
/* Copyright 2017 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*/
|
|
|
|
/* Eve board configuration */
|
|
|
|
#ifndef __CROS_EC_BOARD_H
|
|
#define __CROS_EC_BOARD_H
|
|
|
|
/*
|
|
* Allow dangerous commands.
|
|
* TODO: Remove this config before production.
|
|
*/
|
|
#define CONFIG_SYSTEM_UNLOCKED
|
|
|
|
/* EC */
|
|
#define CONFIG_ADC
|
|
#define CONFIG_BACKLIGHT_LID
|
|
#define CONFIG_BOARD_VERSION_CUSTOM
|
|
#define CONFIG_BOARD_FORCE_RESET_PIN
|
|
#define CONFIG_CASE_CLOSED_DEBUG_EXTERNAL
|
|
#define CONFIG_DPTF
|
|
#define CONFIG_DPTF_MOTION_LID_NO_GMR_SENSOR
|
|
#define CONFIG_DPTF_MULTI_PROFILE
|
|
#define CONFIG_FLASH_SIZE 0x80000
|
|
#define CONFIG_FPU
|
|
#define CONFIG_I2C
|
|
#define CONFIG_I2C_MASTER
|
|
#define CONFIG_I2C_XFER_BOARD_CALLBACK
|
|
#define CONFIG_KEYBOARD_COL2_INVERTED
|
|
#define CONFIG_KEYBOARD_PROTOCOL_8042
|
|
#define CONFIG_LED_COMMON
|
|
#define CONFIG_LID_SWITCH
|
|
#define CONFIG_LOW_POWER_IDLE
|
|
#define CONFIG_LTO
|
|
#define CONFIG_CHIP_PANIC_BACKUP
|
|
#define CONFIG_SOFTWARE_PANIC
|
|
#define CONFIG_SPI_FLASH_REGS
|
|
#define CONFIG_SPI_FLASH_W25X40
|
|
#define CONFIG_VBOOT_HASH
|
|
#define CONFIG_SHA256_UNROLLED
|
|
#define CONFIG_VOLUME_BUTTONS
|
|
#define CONFIG_VSTORE
|
|
#define CONFIG_VSTORE_SLOT_COUNT 1
|
|
#define CONFIG_WATCHDOG_HELP
|
|
#define CONFIG_WIRELESS
|
|
#define CONFIG_WIRELESS_SUSPEND \
|
|
(EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER)
|
|
#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L
|
|
#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN
|
|
|
|
/* EC console commands */
|
|
#define CONFIG_CMD_ACCELS
|
|
#define CONFIG_CMD_ACCEL_INFO
|
|
#define CONFIG_CMD_BUTTON
|
|
|
|
/* Port80 */
|
|
#undef CONFIG_PORT80_HISTORY_LEN
|
|
#define CONFIG_PORT80_HISTORY_LEN 256
|
|
|
|
/* SOC */
|
|
#define CONFIG_CHIPSET_SKYLAKE
|
|
#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET
|
|
#define CONFIG_CHIPSET_RESET_HOOK
|
|
#define CONFIG_HOSTCMD_ESPI
|
|
#define CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS
|
|
|
|
/* Battery */
|
|
#define CONFIG_BATTERY_CUT_OFF
|
|
#define CONFIG_BATTERY_HW_PRESENT_CUSTOM
|
|
#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION"
|
|
#define CONFIG_BATTERY_SMART
|
|
|
|
/* Charger */
|
|
#define CONFIG_CHARGE_MANAGER
|
|
#define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */
|
|
|
|
#define CONFIG_CHARGER
|
|
#define CONFIG_CHARGER_ISL9238
|
|
#define CONFIG_CHARGER_DISCHARGE_ON_AC
|
|
#define CONFIG_CHARGER_INPUT_CURRENT 512
|
|
#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 2
|
|
#define CONFIG_CHARGER_PROFILE_OVERRIDE
|
|
#define CONFIG_CHARGER_PSYS
|
|
#define CONFIG_CHARGER_SENSE_RESISTOR 10
|
|
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20
|
|
#define CONFIG_CMD_CHARGER_ADC_AMON_BMON
|
|
#define CONFIG_CMD_PD_CONTROL
|
|
#define CONFIG_EXTPOWER_GPIO
|
|
#undef CONFIG_EXTPOWER_DEBOUNCE_MS
|
|
#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000
|
|
#define CONFIG_POWER_BUTTON
|
|
#define CONFIG_POWER_BUTTON_X86
|
|
#define CONFIG_POWER_COMMON
|
|
#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30
|
|
#define CONFIG_POWER_S0IX
|
|
#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE
|
|
|
|
/* USB-A config */
|
|
#define CONFIG_USB_PORT_POWER_SMART
|
|
#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY
|
|
#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT
|
|
#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1
|
|
#define GPIO_USB1_ILIM_SEL GPIO_USB_A_ILIM_SEL
|
|
|
|
/* Sensor */
|
|
#define CONFIG_TEMP_SENSOR
|
|
#define CONFIG_TEMP_SENSOR_BD99992GW
|
|
#define CONFIG_THERMISTOR_NCP15WB
|
|
|
|
#define CONFIG_MKBP_EVENT
|
|
#define CONFIG_MKBP_USE_HOST_EVENT
|
|
#define CONFIG_ACCELGYRO_BMI160
|
|
#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
|
|
TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
|
|
#define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT
|
|
#define CONFIG_ACCEL_BMA255
|
|
#define CONFIG_ACCEL_INTERRUPTS
|
|
#define CONFIG_LID_ANGLE
|
|
#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
|
|
#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
|
|
#define CONFIG_LID_ANGLE_UPDATE
|
|
|
|
/* Enable sensor fifo, must also define the _SIZE and _THRES */
|
|
#define CONFIG_ACCEL_FIFO
|
|
/* FIFO size is in power of 2. */
|
|
#define CONFIG_ACCEL_FIFO_SIZE 512
|
|
/* Depends on how fast the AP boots and typical ODRs */
|
|
#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
|
|
|
|
#undef CONFIG_UART_TX_BUF_SIZE
|
|
#define CONFIG_UART_TX_BUF_SIZE 2048
|
|
|
|
#define CONFIG_TABLET_MODE
|
|
#define CONFIG_TABLET_MODE_SWITCH
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_CHARGER
|
|
#define CONFIG_USB_PD_ALT_MODE
|
|
#define CONFIG_USB_PD_ALT_MODE_DFP
|
|
#define CONFIG_USB_PD_DISCHARGE_TCPC
|
|
#define CONFIG_USB_PD_DUAL_ROLE
|
|
#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
|
|
#define CONFIG_USB_PD_LOGGING
|
|
#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0
|
|
#define CONFIG_USB_PD_PORT_COUNT 2
|
|
#define CONFIG_USB_PD_VBUS_DETECT_GPIO
|
|
#define CONFIG_USB_PD_TCPC_LOW_POWER
|
|
#define CONFIG_USB_PD_TCPM_MUX
|
|
#define CONFIG_USB_PD_TCPM_TCPCI
|
|
#define CONFIG_USB_PD_TCPM_PS8751
|
|
#define CONFIG_USB_PD_TRY_SRC
|
|
#define CONFIG_USB_POWER_DELIVERY
|
|
#define CONFIG_USBC_SS_MUX
|
|
#define CONFIG_USBC_SS_MUX_DFP_ONLY
|
|
#define CONFIG_USBC_VCONN
|
|
#define CONFIG_USBC_VCONN_SWAP
|
|
|
|
/* BC 1.2 charger */
|
|
#define CONFIG_BC12_DETECT_PI3USB9281
|
|
#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2
|
|
|
|
/* Optional feature to configure npcx chip */
|
|
#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */
|
|
#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */
|
|
#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */
|
|
|
|
/* I2C ports */
|
|
#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0
|
|
#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1
|
|
#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1
|
|
#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1
|
|
#define I2C_PORT_CHARGER NPCX_I2C_PORT1
|
|
#define I2C_PORT_BATTERY NPCX_I2C_PORT1
|
|
#define I2C_PORT_PMIC NPCX_I2C_PORT2
|
|
#define I2C_PORT_MP2949 NPCX_I2C_PORT2
|
|
#define I2C_PORT_GYRO NPCX_I2C_PORT3
|
|
#define I2C_PORT_BARO NPCX_I2C_PORT3
|
|
#define I2C_PORT_ACCEL I2C_PORT_GYRO
|
|
#define I2C_PORT_THERMAL I2C_PORT_PMIC
|
|
|
|
/* I2C addresses */
|
|
#define I2C_ADDR_BD99992_FLAGS 0x30
|
|
#define I2C_ADDR_MP2949_FLAGS 0x20
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
#include "gpio_signal.h"
|
|
#include "registers.h"
|
|
|
|
/* Nautilus doesn't have systherm0 and systherm3 */
|
|
enum temp_sensor_id {
|
|
TEMP_SENSOR_BATTERY, /* BD99956GW TSENSE */
|
|
TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */
|
|
TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */
|
|
TEMP_SENSOR_COUNT
|
|
};
|
|
|
|
/*
|
|
* Motion sensors:
|
|
* When reading through IO memory is set up for sensors (LPC is used),
|
|
* the first 2 entries must be accelerometers, then gyroscope.
|
|
* For BMI160, accel, gyro and compass sensors must be next to each other.
|
|
*/
|
|
|
|
enum sensor_id {
|
|
LID_ACCEL = 0,
|
|
BASE_ACCEL,
|
|
BASE_GYRO,
|
|
SENSOR_COUNT,
|
|
};
|
|
|
|
enum adc_channel {
|
|
ADC_BASE_DET,
|
|
ADC_VBUS,
|
|
ADC_AMON_BMON,
|
|
ADC_CH_COUNT
|
|
};
|
|
|
|
/* TODO(crosbug.com/p/61098): Verify the numbers below. */
|
|
/*
|
|
* delay to turn on the power supply max is ~16ms.
|
|
* delay to turn off the power supply max is about ~180ms.
|
|
*/
|
|
#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */
|
|
#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
|
|
|
|
/* delay to turn on/off vconn */
|
|
#define PD_VCONN_SWAP_DELAY 5000 /* us */
|
|
|
|
/* Define typical operating power and max power */
|
|
#define PD_OPERATING_POWER_MW 15000
|
|
#define PD_MAX_POWER_MW 45000
|
|
#define PD_MAX_CURRENT_MA 3000
|
|
#define PD_MAX_VOLTAGE_MV 20000
|
|
|
|
/* Board specific handlers */
|
|
int board_get_version(void);
|
|
void board_reset_pd_mcu(void);
|
|
void board_set_tcpc_power_mode(int port, int mode);
|
|
|
|
/* Sensors without hardware FIFO are in forced mode */
|
|
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
|
|
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
#endif /* __CROS_EC_BOARD_H */
|