121 lines
3.6 KiB
C
121 lines
3.6 KiB
C
/* Copyright 2012 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*/
|
|
|
|
/* Watchdog driver */
|
|
|
|
#include "clock.h"
|
|
#include "common.h"
|
|
#include "registers.h"
|
|
#include "gpio.h"
|
|
#include "hooks.h"
|
|
#include "task.h"
|
|
#include "util.h"
|
|
#include "watchdog.h"
|
|
|
|
/*
|
|
* We use watchdog 0 which is clocked on the system clock
|
|
* to avoid the penalty cycles on each write access
|
|
*/
|
|
|
|
/* magic value to unlock the watchdog registers */
|
|
#define LM4_WATCHDOG_MAGIC_WORD 0x1ACCE551
|
|
|
|
static uint32_t watchdog_period; /* Watchdog counter initial value */
|
|
|
|
void IRQ_HANDLER(LM4_IRQ_WATCHDOG)(void) __attribute__((naked));
|
|
void IRQ_HANDLER(LM4_IRQ_WATCHDOG)(void)
|
|
{
|
|
/* Naked call so we can extract raw LR and SP */
|
|
asm volatile("mov r0, lr\n"
|
|
"mov r1, sp\n"
|
|
/* Must push registers in pairs to keep 64-bit aligned
|
|
* stack for ARM EABI. This also conveniently saves
|
|
* R0=LR so we can pass it to task_resched_if_needed. */
|
|
"push {r0, lr}\n"
|
|
"bl watchdog_trace\n"
|
|
/* Do NOT reset the watchdog interrupt here; it will
|
|
* be done in watchdog_reload(), or reset will be
|
|
* triggered if we don't call that by the next watchdog
|
|
* period. Instead, de-activate the interrupt in the
|
|
* NVIC, so the watchdog trace will only be printed
|
|
* once.
|
|
*/
|
|
"mov r0, %[irq]\n"
|
|
"bl task_disable_irq\n"
|
|
"pop {r0, lr}\n"
|
|
"b task_resched_if_needed\n"
|
|
: : [irq] "i" (LM4_IRQ_WATCHDOG));
|
|
}
|
|
const struct irq_priority __keep IRQ_PRIORITY(LM4_IRQ_WATCHDOG)
|
|
__attribute__((section(".rodata.irqprio")))
|
|
= {LM4_IRQ_WATCHDOG, 0}; /* put the watchdog at the highest
|
|
priority */
|
|
|
|
void watchdog_reload(void)
|
|
{
|
|
uint32_t status = LM4_WATCHDOG_RIS(0);
|
|
|
|
/* Unlock watchdog registers */
|
|
LM4_WATCHDOG_LOCK(0) = LM4_WATCHDOG_MAGIC_WORD;
|
|
|
|
/* As we reboot only on the second timeout, if we have already reached
|
|
* the first timeout we need to reset the interrupt bit. */
|
|
if (status) {
|
|
LM4_WATCHDOG_ICR(0) = status;
|
|
/* That doesn't seem to unpend the watchdog interrupt (even if
|
|
* we do dummy writes to force the write to be committed), so
|
|
* explicitly unpend the interrupt before re-enabling it. */
|
|
task_clear_pending_irq(LM4_IRQ_WATCHDOG);
|
|
task_enable_irq(LM4_IRQ_WATCHDOG);
|
|
}
|
|
|
|
/* Reload the watchdog counter */
|
|
LM4_WATCHDOG_LOAD(0) = watchdog_period;
|
|
|
|
/* Re-lock watchdog registers */
|
|
LM4_WATCHDOG_LOCK(0) = 0xdeaddead;
|
|
}
|
|
DECLARE_HOOK(HOOK_TICK, watchdog_reload, HOOK_PRIO_DEFAULT);
|
|
|
|
static void watchdog_freq_changed(void)
|
|
{
|
|
/* Set the timeout period */
|
|
watchdog_period = CONFIG_WATCHDOG_PERIOD_MS * (clock_get_freq() / 1000);
|
|
|
|
/* Reload the watchdog timer now */
|
|
watchdog_reload();
|
|
}
|
|
DECLARE_HOOK(HOOK_FREQ_CHANGE, watchdog_freq_changed, HOOK_PRIO_DEFAULT);
|
|
|
|
int watchdog_init(void)
|
|
{
|
|
/* Enable watchdog 0 clock in run, sleep, and deep sleep modes */
|
|
clock_enable_peripheral(CGC_OFFSET_WD, 0x1, CGC_MODE_ALL);
|
|
|
|
/* Set initial timeout period */
|
|
watchdog_freq_changed();
|
|
|
|
/* Unlock watchdog registers */
|
|
LM4_WATCHDOG_LOCK(0) = LM4_WATCHDOG_MAGIC_WORD;
|
|
|
|
/* De-activate the watchdog when the JTAG stops the CPU */
|
|
LM4_WATCHDOG_TEST(0) |= BIT(8);
|
|
|
|
/* Reset after 2 time-out, activate the watchdog and lock the control
|
|
* register. */
|
|
LM4_WATCHDOG_CTL(0) = 0x3;
|
|
|
|
/* Reset watchdog interrupt bits */
|
|
LM4_WATCHDOG_ICR(0) = LM4_WATCHDOG_RIS(0);
|
|
|
|
/* Lock watchdog registers against unintended accesses */
|
|
LM4_WATCHDOG_LOCK(0) = 0xdeaddead;
|
|
|
|
/* Enable watchdog interrupt */
|
|
task_enable_irq(LM4_IRQ_WATCHDOG);
|
|
|
|
return EC_SUCCESS;
|
|
}
|