258 lines
9.8 KiB
Markdown
258 lines
9.8 KiB
Markdown
Copyright (c) 2019 Western Digital Corporation or its affiliates
|
|
and other contributors.
|
|
|
|
RISC-V Open Source Supervisor Binary Interface (OpenSBI)
|
|
========================================================
|
|
|
|
The **RISC-V Supervisor Binary Interface (SBI)** is the recommended interface
|
|
between:
|
|
|
|
1. A platform-specific firmware running in M-mode and a bootloader, a
|
|
hypervisor or a general-purpose OS executing in S-mode or HS-mode.
|
|
2. A hypervisor running in HS-mode and a bootloader or a general-purpose OS
|
|
executing in VS-mode.
|
|
|
|
The *RISC-V SBI specification* is maintained as an independent project by the
|
|
RISC-V Foundation on [Github] (https://github.com/riscv/riscv-sbi-doc).
|
|
|
|
The goal of the OpenSBI project is to provide an open-source reference
|
|
implementation of the RISC-V SBI specifications for platform-specific firmwares
|
|
executing in M-mode (case 1 mentioned above). An OpenSBI implementation can be
|
|
easily extended by RISC-V platform and system-on-chip vendors to fit a
|
|
particular hardware configuration.
|
|
|
|
The main component of OpenSBI is provided in the form of a platform-independent
|
|
static library **libsbi.a** implementing the SBI interface. A firmware or
|
|
bootloader implementation can link against this library to ensure conformance
|
|
with the SBI interface specifications. *libsbi.a* also defines an interface for
|
|
integrating with platform-specific operations provided by the platform firmware
|
|
implementation (e.g. console access functions, inter-processor interrupt
|
|
control, etc).
|
|
|
|
To illustrate the use of the *libsbi.a* library, OpenSBI also provides a set of
|
|
platform-specific support examples. For each example, a platform-specific
|
|
static library *libplatsbi.a* can be compiled. This library implements
|
|
SBI call processing by integrating *libsbi.a* with the necessary
|
|
platform-dependent hardware manipulation functions. For all supported platforms,
|
|
OpenSBI also provides several runtime firmware examples built using the platform
|
|
*libplatsbi.a*. These example firmwares can be used to replace the legacy
|
|
*riscv-pk* bootloader (aka BBL) and enable the use of well-known bootloaders
|
|
such as [U-Boot] (https://git.denx.de/u-boot.git).
|
|
|
|
Required Toolchain
|
|
------------------
|
|
|
|
OpenSBI can be compiled natively or cross-compiled on a x86 host. For
|
|
cross-compilation, you can build your own toolchain or just download
|
|
a prebuilt one from the
|
|
[Bootlin toolchain repository] (https://toolchains.bootlin.com/).
|
|
|
|
Please note that only a 64-bit version of the toolchain is available in
|
|
the Bootlin toolchain repository for now.
|
|
|
|
Building and Installing the OpenSBI Platform-Independent Library
|
|
----------------------------------------------------------------
|
|
|
|
The OpenSBI platform-independent static library *libsbi.a* can be compiled
|
|
natively or it can be cross-compiled on a host with a different base
|
|
architecture than RISC-V.
|
|
|
|
For cross-compiling, the environment variable *CROSS_COMPILE* must be defined
|
|
to specify the name prefix of the RISC-V compiler toolchain executables, e.g.
|
|
*riscv64-unknown-elf-* if the gcc executable used is *riscv64-unknown-elf-gcc*.
|
|
|
|
To build *libsbi.a* simply execute:
|
|
```
|
|
make
|
|
```
|
|
|
|
All compiled binaries as well as the resulting *libsbi.a* static library file
|
|
will be placed in the *build/lib* directory. To specify an alternate build root
|
|
directory path, run:
|
|
```
|
|
make O=<build_directory>
|
|
```
|
|
|
|
To generate files to be installed for using *libsbi.a* in other projects, run:
|
|
```
|
|
make install
|
|
```
|
|
|
|
This will create the *install* directory with all necessary include files
|
|
copied under the *install/include* directory and the library file copied into
|
|
the *install/lib* directory. To specify an alternate installation root
|
|
directory path, run:
|
|
```
|
|
make I=<install_directory> install
|
|
```
|
|
|
|
Building and Installing a Reference Platform Static Library and Firmware
|
|
------------------------------------------------------------------------
|
|
|
|
When the *PLATFORM=<platform_subdir>* argument is specified on the make command
|
|
line, the platform-specific static library *libplatsbi.a* and firmware examples
|
|
are built for the platform *<platform_subdir>* present in the directory
|
|
*platform* in the OpenSBI top directory. For example, to compile the platform
|
|
library and the firmware examples for the QEMU RISC-V *virt* machine,
|
|
*<platform_subdir>* should be *qemu/virt*.
|
|
|
|
To build *libsbi.a*, *libplatsbi.a* and the firmware for one of the supported
|
|
platforms, run:
|
|
```
|
|
make PLATFORM=<platform_subdir>
|
|
```
|
|
|
|
An alternate build directory path can also be specified:
|
|
```
|
|
make PLATFORM=<platform_subdir> O=<build_directory>
|
|
```
|
|
|
|
The platform-specific library *libplatsbi.a* will be generated in the
|
|
*build/platform/<platform_subdir>/lib* directory. The platform firmware files
|
|
will be under the *build/platform/<platform_subdir>/firmware* directory.
|
|
The compiled firmwares will be available in two different formats: an ELF file
|
|
and an expanded image file.
|
|
|
|
To install *libsbi.a*, *libplatsbi.a*, and the compiled firmwares, run:
|
|
```
|
|
make PLATFORM=<platform_subdir> install
|
|
```
|
|
|
|
This will copy the compiled platform-specific libraries and firmware files
|
|
under the *install/platform/<platform_subdir>/* directory. An alternate
|
|
install root directory path can be specified as follows:
|
|
```
|
|
make PLATFORM=<platform_subdir> I=<install_directory> install
|
|
```
|
|
|
|
In addition, platform-specific configuration options can be specified with the
|
|
top-level make command line. These options, such as *PLATFORM_<xyz>* or
|
|
*FW_<abc>*, are platform-specific and described in more details in the
|
|
*docs/platform/<platform_name>.md* files and
|
|
*docs/firmware/<firmware_name>.md* files.
|
|
|
|
Building 32-bit / 64-bit OpenSBI Images
|
|
---------------------------------------
|
|
By default, building OpenSBI generates 32-bit or 64-bit images based on the
|
|
supplied RISC-V cross-compile toolchain. For example if *CROSS_COMPILE* is set
|
|
to *riscv64-unknown-elf-*, 64-bit OpenSBI images will be generated. If building
|
|
32-bit OpenSBI images, *CROSS_COMPILE* should be set to a toolchain that is
|
|
pre-configured to generate 32-bit RISC-V codes, like *riscv32-unknown-elf-*.
|
|
|
|
However it's possible to explicitly specify the image bits we want to build with
|
|
a given RISC-V toolchain. This can be done by setting the environment variable
|
|
*PLATFORM_RISCV_XLEN* to the desired width, for example:
|
|
|
|
```
|
|
export CROSS_COMPILE=riscv64-unknown-elf-
|
|
export PLATFORM_RISCV_XLEN=32
|
|
```
|
|
|
|
will generate 32-bit OpenSBI images. And vice vesa.
|
|
|
|
License
|
|
-------
|
|
|
|
OpenSBI is distributed under the terms of the BSD 2-clause license
|
|
("Simplified BSD License" or "FreeBSD License", SPDX: *BSD-2-Clause*).
|
|
A copy of this license with OpenSBI copyright can be found in the file
|
|
[COPYING.BSD].
|
|
|
|
All source files in OpenSBI contain the 2-Clause BSD license SPDX short
|
|
identifier in place of the full license text.
|
|
|
|
```
|
|
SPDX-License-Identifier: BSD-2-Clause
|
|
```
|
|
|
|
This enables machine processing of license information based on the SPDX
|
|
License Identifiers that are available on the [SPDX] web site.
|
|
|
|
OpenSBI source code also contains code reused from other projects as listed
|
|
below. The original license text of these projects is included in the source
|
|
files where the reused code is present.
|
|
|
|
* The libfdt source code is disjunctively dual licensed
|
|
(GPL-2.0+ OR BSD-2-Clause). Some of this project code is used in OpenSBI
|
|
under the terms of the BSD 2-Clause license. Any contributions to this
|
|
code must be made under the terms of both licenses.
|
|
|
|
See also the [third party notices] file for more information.
|
|
|
|
Contributing to OpenSBI
|
|
-----------------------
|
|
|
|
The OpenSBI project encourages and welcomes contributions. Contributions should
|
|
follow the rules described in the OpenSBI [Contribution Guideline] document.
|
|
In particular, all patches sent should contain a Signed-off-by tag.
|
|
|
|
The [Contributors List] document provides a list of individuals and
|
|
organizations actively contributing to the OpenSBI project.
|
|
|
|
Documentation
|
|
-------------
|
|
|
|
Detailed documentation of various aspects of OpenSBI can be found under the
|
|
*docs* directory. The documentation covers the following topics.
|
|
|
|
* [Contribution Guideline]: Guideline for contributing code to OpenSBI project
|
|
* [Library Usage]: API documentation of OpenSBI static library *libsbi.a*
|
|
* [Platform Support Guide]: Guideline for implementing support for new platforms
|
|
* [Platform Documentation]: Documentation of the platforms currently supported.
|
|
* [Firmware Documentation]: Documentation for the different types of firmware
|
|
examples build supported by OpenSBI.
|
|
|
|
OpenSBI source code is also well documented. For source level documentation,
|
|
doxygen style is used. Please refer to the [Doxygen manual] for details on this
|
|
format.
|
|
|
|
Doxygen can be installed on Linux distributions using *.deb* packages using
|
|
the following command.
|
|
```
|
|
sudo apt-get install doxygen doxygen-latex doxygen-doc doxygen-gui graphviz
|
|
```
|
|
|
|
For *.rpm* based Linux distributions, the following commands can be used.
|
|
```
|
|
sudo yum install doxygen doxygen-latex doxywizard graphviz
|
|
```
|
|
or
|
|
```
|
|
sudo yum install doxygen doxygen-latex doxywizard graphviz
|
|
```
|
|
|
|
To build a consolidated *refman.pdf* of all documentation, run:
|
|
```
|
|
make docs
|
|
```
|
|
or
|
|
```
|
|
make O=<build_directory> docs
|
|
```
|
|
|
|
the resulting *refman.pdf* will be available under the directory
|
|
*<build_directory>/docs/latex*. To install this file, run:
|
|
```
|
|
make install_docs
|
|
```
|
|
or
|
|
```
|
|
make I=<install_directory> install_docs
|
|
```
|
|
|
|
*refman.pdf* will be installed under *<install_directory>/docs*.
|
|
|
|
[Github]: https://github.com/riscv/riscv-sbi-doc
|
|
[U-Boot]: https://www.denx.de/wiki/U-Boot/SourceCode
|
|
[COPYING.BSD]: COPYING.BSD
|
|
[SPDX]: http://spdx.org/licenses/
|
|
[Contribution Guideline]: docs/contributing.md
|
|
[Contributors List]: CONTRIBUTORS.md
|
|
[Library Usage]: docs/library_usage.md
|
|
[Platform Support Guide]: docs/platform_guide.md
|
|
[Platform Documentation]: docs/platform/platform.md
|
|
[Firmware Documentation]: docs/firmware/fw.md
|
|
[Doxygen manual]: http://www.doxygen.nl/manual/index.html
|
|
[Kendryte standalone SDK]: https://github.com/kendryte/kendryte-standalone-sdk
|
|
[third party notices]: ThirdPartyNotices.md
|