222 lines
7.6 KiB
Markdown
222 lines
7.6 KiB
Markdown
---
|
|
title: ASUS KGPE-D16 server/workstation board
|
|
x-unreviewed: true
|
|
...
|
|
|
|
Introduction
|
|
============
|
|
|
|
This is a server board using AMD hardware (Fam10h *and Fam15h* CPUs
|
|
available). It can also be used for building a high-powered workstation.
|
|
Powered by libreboot. The coreboot port was done by Timothy Pearson of
|
|
Raptor Engineering Inc. and, working with them (and sponsoring the
|
|
work), merged into libreboot.
|
|
|
|
*Memory initialization is still problematic, for some modules. We
|
|
recommend avoiding Kingston modules.*
|
|
*For working configurations see <https://www.coreboot.org/Board:asus/kgpe-d16>.*
|
|
|
|
Flashing instructions can be found at
|
|
[../install/\#flashrom](../install/#flashrom) - note that external
|
|
flashing is required (e.g. BBB), if the proprietary (ASUS) firmware is
|
|
currently installed. If you already have libreboot, by default it is
|
|
possible to re-flash using software running in GNU+Linux on the
|
|
KGPE-D16, without using external hardware.
|
|
|
|
CPU compatibility
|
|
=================
|
|
|
|
*Use Opteron 6200 series (works without microcode updates, including hw
|
|
virt).* 6300 series needs microcode updates, so avoid those CPUs. 6100
|
|
series is too old, and mostly untested.
|
|
|
|
Board status (compatibility) {#boardstatus}
|
|
============================
|
|
|
|
See <https://raptorengineeringinc.com/coreboot/kgpe-d16-status.php>.
|
|
|
|
Form factor {#formfactor}
|
|
===========
|
|
|
|
These boards use the SSI EEB 3.61 form factor; make sure that your case
|
|
supports this. This form factor is similar to E-ATX in that the size is
|
|
identical, but the position of the screws are different.
|
|
|
|
IPMI iKVM module add-on {#ipmi}
|
|
=======================
|
|
|
|
Don't use it. It uses proprietary firmware and adds a backdoor (remote
|
|
out-of-band management chip, similar to the [Intel Management
|
|
Engine](../../faq.html#intelme). Fortunately, the firmware is
|
|
unsigned (possibly to replace) and physically separate from the
|
|
mainboard since it's on the add-on module, which you don't have to
|
|
install.
|
|
|
|
Flash chips {#flashchips}
|
|
===========
|
|
|
|
2MiB flash chips are included by default, on these boards. It's on a
|
|
P-DIP 8 slot (SPI chip). The flash chip can be upgraded to higher sizes:
|
|
4MiB, 8MiB or 16MiB. With at least 8MiB, you could feasibly fit a
|
|
compressed linux+initramfs image (BusyBox+Linux system) into CBFS and
|
|
boot that, loading it into memory.
|
|
|
|
Libreboot has configs for 2, 4, 8 and 16 MiB flash chip sizes (default
|
|
flash chip is 2MiB).
|
|
|
|
*DO NOT hot-swap the chip with your bare hands. Use a P-DIP 8 chip
|
|
extractor. These can be found online. See
|
|
<http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>*
|
|
|
|
This guide shows how to flash the chip:\
|
|
[25xx NOR flashing guide](../install/spi.html)
|
|
|
|
Native graphics initialization {#graphics}
|
|
==============================
|
|
|
|
Only text-mode is known to work, but linux(kernel) can initialize the
|
|
framebuffer display (if it has KMS - kernel mode setting).
|
|
|
|
Current issues {#issues}
|
|
==============
|
|
|
|
- LRDIMM memory modules are currently incompatible
|
|
- SAS (via PIKE 2008 module) requires non-free option ROM (and
|
|
SeaBIOS) to boot from it (theoretically possible to replace, but you
|
|
can put a kernel in CBFS or on SATA and use that to boot GNU, which
|
|
can be on a SAS drive. The linux kernel can use those SAS drives
|
|
(via PIKE module) without an option ROM).
|
|
- SeaBIOS lacked serial console support out-of-the-box in release 20160907
|
|
and as such a workaround using SGABIOS is necessary. You can find
|
|
instructions on how to do this on the
|
|
[Notabug issue tracker](http://web.archive.org/web/20210416011941/https://notabug.org/libreboot/libreboot/issues/736)
|
|
- IPMI iKVM module (optional add-on card) uses proprietary firmware.
|
|
Since it's for remote out-of-band management, it's theoretically a
|
|
backdoor similar to the Intel Management Engine. Fortunately, unlike
|
|
the ME, this firmware is unsigned which means that a free
|
|
replacement is theoretically possible. For now, the libreboot
|
|
project recommends not installing the module. [This
|
|
project](https://github.com/facebook/openbmc) might be interesting
|
|
to derive from, for those who want to work on a free replacement. In
|
|
practise, out-of-band management isn't very useful anyway (or at
|
|
the very least, it's not a major inconvenience to not have it).
|
|
- Graphics: only text-mode works. See [\#graphics](#graphics)
|
|
|
|
Hardware specifications {#specifications}
|
|
-----------------------
|
|
|
|
The information here is adapted, from the ASUS website.
|
|
|
|
### Processor / system bus
|
|
|
|
- 2 CPU sockets (G34 compatible)
|
|
- HyperTransport™ Technology 3.0
|
|
- CPUs supported:
|
|
- AMD Opteron 6100 series (Fam10h. No IOMMU support. *Not*
|
|
recommended - old. View errata datasheet here:
|
|
<http://support.amd.com/TechDocs/41322_10h_Rev_Gd.pdf>)
|
|
- AMD Opteron 6200 series (Fam15h, with full IOMMU support in
|
|
libreboot - *highly recommended - fast, and works well without
|
|
microcode updates, including virtualization*)
|
|
- AMD Opteron 6300 series (Fam15h, with full IOMMU support in
|
|
libreboot. *AVOID LIKE THE PLAGUE - virtualization is broken
|
|
without microcode updates.*
|
|
- NOTE: 6300 series CPUs have buggy microcode built-in, and
|
|
libreboot recommends avoiding the updates. The 6200 series CPUs
|
|
have more reliable microcode. Look at this errata datasheet:
|
|
<http://support.amd.com/TechDocs/48063_15h_Mod_00h-0Fh_Rev_Guide.pdf>
|
|
(see Errata 734 - this is what kills the 6300 series)
|
|
- 6.4 GT/s per link (triple link)
|
|
|
|
### Core logic
|
|
|
|
- AMD SR5690
|
|
- AMD SP5100
|
|
|
|
### Memory compatibility (with libreboot)
|
|
|
|
- *Total Slots:* 16 (4-channel per CPU, 8 DIMM per CPU), ECC
|
|
- *Capacity:* Maximum up to 256GB RDIMM (Tested max 128GB)
|
|
- *Memory Type that is compatible:*
|
|
- DDR3 1600/1333/1066/800 UDIMM\*
|
|
- DDR3 1600/1333/1066/800 RDIMM\*
|
|
- *Compatible sizes per memory module:*
|
|
- 16GB, 8GB, 4GB, 3GB, 2GB, 1GB RDIMM
|
|
- 8GB, 4GB, 2GB, 1GB UDIMM
|
|
|
|
### Expansion slots
|
|
|
|
- *Total slot:* 6
|
|
- *Slot Location 1:* PCI 32bit/33MHz
|
|
- *Slot Location 2:* PCI-E x16 (Gen2 X8 Link)
|
|
- *Slot Location 3:* PCI-E x16 (Gen2 X16 Link), Auto switch to x8
|
|
link if slot 2 is occupied
|
|
- *Slot Location 4:* PCI-E x8 (Gen2 X4 Link)
|
|
- *Slot Location 5:* PCI-E x16 (Gen2 X16 Link)
|
|
- *Slot Location 6:* PCI-E x16 (Gen2 X16 Link), Auto turn off if
|
|
slot 5 is occupied, For 1U FH/FL Card, MIO supported
|
|
- *Additional Slot 1:* PIKE slot (for SAS drives. See notes above)
|
|
- Follow SSI Location\#
|
|
|
|
### Form factor {#form-factor}
|
|
|
|
- SSI EEB 3.61 (12"x13")
|
|
|
|
### ASUS features
|
|
|
|
- Fan Speed Control
|
|
- Rack Ready (Rack and Pedestal dual use)
|
|
|
|
### Storage
|
|
|
|
- *SATA controller:*
|
|
- AMD SP5100
|
|
- 6 x SATA2 300MB/s
|
|
- *SAS/SATA Controller:*
|
|
- ASUS PIKE2008 3Gbps 8-port SAS card included
|
|
|
|
### Networking
|
|
|
|
- 2 x Intel® 82574L + 1 x Mgmt LAN
|
|
|
|
### Graphics
|
|
|
|
- Aspeed AST2050 with 8MB VRAM
|
|
|
|
### On board I/O
|
|
|
|
- 1 x PSU Power Connector (24-pin SSI power connector + 8-pin SSI
|
|
12V + 8-pin SSI 12V power connector)
|
|
- 1 x Management Connector , Onboard socket for management card
|
|
- 3 x USB pin header , Up to 6 Devices
|
|
- 1 x Internal A Type USB Port
|
|
- 8 x Fan Header , 4pin (3pin/4pin fan dual support)
|
|
- 2 x SMBus
|
|
- 1 x Serial Port Header
|
|
- 1 x TPM header
|
|
- 1 x PS/2 KB/MS port
|
|
|
|
### Back I/O ports
|
|
|
|
- 1 x External Serial Port
|
|
- 2 x External USB Port
|
|
- 1 x VGA Port
|
|
- 2 x RJ-45
|
|
- 1 x PS/2 KB/Mouse
|
|
|
|
### Environment
|
|
|
|
- *Operation temperature:* 10C \~ 35C
|
|
- *Non operation temperature:* -40C \~ 70C
|
|
- *Non operation humidity:* 20% \~ 90% ( Non condensing)
|
|
|
|
### Monitoring
|
|
|
|
- CPU temperatures
|
|
- Fan speed (RPM)
|
|
|
|
### Note:
|
|
|
|
- \* DDR3 1600 can only be supported with AMD Opteron 6300/6200 series
|
|
processor
|