gnuboot/website/docs/hardware/r500.md

24 lines
837 B
Markdown

---
title: ThinkPad R500
x-unreviewed: true
...
This board as basically identical to the T500, and has very similar disassembly.
You must take it apart and flash the chip externally.
The chip is 4MiB NOR flash (SPI protocol) is SOIC8 form factory.
Refer to the following guide:\
[Externally rewrite 25xx NOR flash via SPI protocol](../install/spi.html)
Unlike other GM45+ICH9M thinkpads in Libreboot, the R500 doesn't have an Intel
PHY (for Gigabit Ethernet). However, Libreboot still includes an Intel flash
descriptor, but with just the descriptor and BIOS region. The `ich9gen` program
supports this fully.
Therefore, you do not have to worry about the MAC address. The onboard NIC for
ethernet is made by Broadcom (and works in linux-libre).
Refer to T500 disassembly guide. The R500 disassembly procedure is almost
identical.