GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/northbridge/amd/pi/agesawrapper.c

628 lines
20 KiB
C
Raw Normal View History

mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
/*
* This file is part of the coreboot project.
*
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
* Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
Remove address from GPLv2 headers As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-26 15:17:45 +01:00
* Foundation, Inc.
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
*/
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#include <AGESA.h>
amd/pi: Move AGESA cbfs access into the wrapper The AGESA.c file in 3rdparty has cbfs access functions for locating the AGESA binaries. coreboot access functions need to be within coreboot where they can be updated with cbfs changes. Move the offending function to coreboot. Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10058 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-05 17:55:57 +02:00
#include <cbfs.h>
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#include <cpu/amd/pi/s3_resume.h>
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
#include <cpu/x86/mtrr.h>
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#include <cpuRegisters.h>
#include <FchPlatform.h>
#include <heapManager.h>
amd/olivehillplus: Share agesawrapper header This interface is common with AMD PI implementations. Change-Id: Ifabfce97db749e04aa19e53f62216be78158b282 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7150 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)
2014-10-22 07:05:36 +02:00
#include <northbridge/amd/pi/agesawrapper.h>
AMD: Isolate AGESA and PI build environments To backport features introduced with recent Chromebooks and/or Intel boards in general, heavy work on the AMD AGESA platform infrastructure is required. With the AGESA PI available in binary form only, community members have little means to verify, debug and develop for the said platforms. Thus it makes sense to fork the existing agesawrapper interfaces, to give AMD PI platforms a clean and independent sandbox. New directory layout reflects the separation already taken place under 3rdparty/ and vendorcode/. Change-Id: Ib60861266f8a70666617dde811663f2d5891a9e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7149 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)
2014-10-21 17:22:32 +02:00
#include <northbridge/amd/pi/BiosCallOuts.h>
northbridge/amd/pi: Add support for memory settings This adds support for binarypi based boards that have to make adjustments to the memory configuration settings. A PlatformMemoryConfiguration[] table that describes the memory configuration must be defined in the mainboard folder. Change-Id: I5e4b476a4adf3dd1f3b7843274a81ecb243d10ab Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10672 Tested-by: build bot (Jenkins) Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-05-20 18:33:51 +02:00
#include <PlatformMemoryConfiguration.h>
extern const PSO_ENTRY PlatformMemoryConfiguration[];
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
#define FILECODE UNASSIGNED_FILE_FILECODE
amd/olivehillplus: No global variables for romstage These functions are only used for ramstage. Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7148 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-22 05:42:57 +02:00
#ifndef __PRE_RAM__
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
/* ACPI table pointers returned by AmdInitLate */
amd/olivehillplus: No global variables for romstage These functions are only used for ramstage. Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7148 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-22 05:42:57 +02:00
static void *DmiTable = NULL;
static void *AcpiPstate = NULL;
static void *AcpiSrat = NULL;
static void *AcpiSlit = NULL;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
amd/olivehillplus: No global variables for romstage These functions are only used for ramstage. Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7148 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-22 05:42:57 +02:00
static void *AcpiWheaMce = NULL;
static void *AcpiWheaCmc = NULL;
static void *AcpiAlib = NULL;
static void *AcpiIvrs = NULL;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
static void *AcpiCrat = NULL;
#endif /* #ifndef __PRE_RAM__ */
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AGESA_STATUS agesawrapper_amdinitreset(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_RESET_PARAMS AmdResetParams;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
LibAmdMemFill (&AmdResetParams,
0,
sizeof (AMD_RESET_PARAMS),
&(AmdResetParams.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
AmdParamStruct.AllocationMethod = ByHost;
AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
AmdParamStruct.NewStructPtr = &AmdResetParams;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
AmdCreateStruct (&AmdParamStruct);
AmdResetParams.FchInterface.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
if (IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON))
AmdResetParams.FchInterface.Xhci1Enable = TRUE;
AmdResetParams.FchInterface.SataEnable = !((CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3));
AmdResetParams.FchInterface.IdeEnable = (CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
status = AmdInitReset(&AmdResetParams);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
AmdReleaseStruct (&AmdParamStruct);
return status;
}
AGESA_STATUS agesawrapper_amdinitearly(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
AmdParamStruct.AllocationMethod = PreMemHeap;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
AmdCreateStruct (&AmdParamStruct);
AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
OemCustomizeInitEarly (AmdEarlyParamsPtr);
AMD PI agesawrapper: add PSPP (PCIe Speed Power Policy) interface PSPP policy is defined in 3rdparty/blobs/pi/amd/*/AGESA.h /// PCIe PSPP Power policy typedef enum { PsppDisabled, ///< PSPP disabled PsppPerformance = 1, ///< Performance PsppBalanceHigh, ///< Balance-High PsppBalanceLow, ///< Balance-Low PsppPowerSaving, ///< Power Saving MaxPspp ///< Max Pspp for boundary check } PCIE_PSPP_POLICY; Change-Id: I7fe735cddea94a83e38d856a3de1f27735467a28 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10461 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-08 04:13:13 +02:00
AmdEarlyParamsPtr->GnbConfig.PsppPolicy = PsppDisabled;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
AmdReleaseStruct (&AmdParamStruct);
return status;
}
AGESA_STATUS agesawrapper_amdinitpost(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_POST_PARAMS *PostParams;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
AmdParamStruct.AllocationMethod = PreMemHeap;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
AmdParamStruct.StdHeader.AltImageBasePtr = NULL;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
AmdCreateStruct (&AmdParamStruct);
PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
northbridge/amd/pi: Add support for memory settings This adds support for binarypi based boards that have to make adjustments to the memory configuration settings. A PlatformMemoryConfiguration[] table that describes the memory configuration must be defined in the mainboard folder. Change-Id: I5e4b476a4adf3dd1f3b7843274a81ecb243d10ab Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10672 Tested-by: build bot (Jenkins) Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-05-20 18:33:51 +02:00
/*
* A PlatformMemoryConfiguration[] table must be added in the
* mainboard folder to any boards that need the memory configuation
* settings altered from the standard settings. Examples of boards
* requiring this change might be boards with soldered down memory,
* or boards that use a non-standard memory clock routing scheme
* There are PlatformMemoryConfiguration[] tables in many existing
* mainboards that can be used as an example.
*/
if (PlatformMemoryConfiguration[0] != PSO_END)
PostParams->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryConfiguration;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
// Do not use IS_ENABLED here. CONFIG_GFXUMA should always have a value. Allow
// the compiler to flag the error if CONFIG_GFXUMA is not set.
PostParams->MemConfig.UmaMode = CONFIG_GFXUMA ? UMA_AUTO : UMA_NONE;
PostParams->MemConfig.UmaSize = 0;
status = AmdInitPost (PostParams);
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
printk(
BIOS_SPEW,
"setup_uma_memory: umamode %s\n",
(PostParams->MemConfig.UmaMode == UMA_AUTO) ? "UMA_AUTO" :
(PostParams->MemConfig.UmaMode == UMA_SPECIFIED) ? "UMA_SPECIFIED" :
(PostParams->MemConfig.UmaMode == UMA_NONE) ? "UMA_NONE" :
"unknown"
);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
printk(
BIOS_SPEW,
"setup_uma_memory: syslimit 0x%08llX, bottomio 0x%08lx\n",
(unsigned long long)(PostParams->MemConfig.SysLimit) << 16,
(unsigned long)(PostParams->MemConfig.BottomIo) << 16
);
printk(
BIOS_SPEW,
"setup_uma_memory: uma size %luMB, uma start 0x%08lx\n",
(unsigned long)(PostParams->MemConfig.UmaSize) >> (20 - 16),
(unsigned long)(PostParams->MemConfig.UmaBase) << 16
);
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
AmdReleaseStruct (&AmdParamStruct);
/* Initialize heap space */
EmptyHeap();
return status;
}
AGESA_STATUS agesawrapper_amdinitenv(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_ENV_PARAMS *EnvParam;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
AmdParamStruct.AllocationMethod = PostMemDram;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
status = AmdCreateStruct (&AmdParamStruct);
EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
EnvParam->FchInterface.AzaliaController = AzEnable;
EnvParam->FchInterface.SataClass = CONFIG_HUDSON_SATA_MODE;
EnvParam->FchInterface.SataEnable = !((CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3));
EnvParam->FchInterface.IdeEnable = (CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3);
EnvParam->FchInterface.SataIdeMode = (CONFIG_HUDSON_SATA_MODE == 3);
AMD 00730F01: Topology changes required by KaveriPI v1.1.0.7 update The updated KaveriPI binary, upgrading to v1.1.0.7, requires changes to define the PSP device (PCI 0:08.0) and the IOMMU device (PCI 0:00.2). In the new AGESA binary, the IOMMU device is enabled and must be disabled in devicetree.cb and agesawrapper_amdinitenv() to maintain the same level of functionality. Change-Id: I3f47e0bd5a75729ec1e4b7b11885d0622c474342 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/7727 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-08 09:43:23 +01:00
EnvParam->GnbEnvConfiguration.IommuSupport = FALSE;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
status = AmdInitEnv (EnvParam);
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
/* Initialize Subordinate Bus Number and Secondary Bus Number
* In platform BIOS this address is allocated by PCI enumeration code
Modify D1F0x18
*/
return status;
}
amd/olivehillplus: No global variables for romstage These functions are only used for ramstage. Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7148 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-22 05:42:57 +02:00
#ifndef __PRE_RAM__
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
VOID* agesawrapper_getlateinitptr (int pick)
{
switch (pick) {
case PICK_DMI:
return DmiTable;
case PICK_PSTATE:
return AcpiPstate;
case PICK_SRAT:
return AcpiSrat;
case PICK_SLIT:
return AcpiSlit;
case PICK_WHEA_MCE:
return AcpiWheaMce;
case PICK_WHEA_CMC:
return AcpiWheaCmc;
case PICK_ALIB:
return AcpiAlib;
case PICK_IVRS:
return AcpiIvrs;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
case PICK_CRAT:
return AcpiCrat;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
default:
return NULL;
}
}
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#endif /* #ifndef __PRE_RAM__ */
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AGESA_STATUS agesawrapper_amdinitmid(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
AMD_MID_PARAMS *MidParam;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
/* Enable MMIO on AMD CPU Address Map Controller */
cpu/amd/pi: Add amd_initcpuio() and amd_initmmio() This makes the change to the cpu/amd/pi/00730F01 that was made for the cpu/amd/agesa based boards in: commit 48518f0d AGESA: Add amd_initcpuio() and amd_initmmio() These are not wrappers for AGESA as they do not enter vendorcode at all. We expect most of the added fixme.c file to be written without use of AMDLIB.h and parts relocated as northbridge enable_resources(). The equivalent change has already been made for cpu/amd/pi/00630F01. Change-Id: I591b50ee807436f5a1dee14d2c88a77462024744 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8670 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-13 16:29:20 +01:00
amd_initcpuio ();
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
AmdParamStruct.AllocationMethod = PostMemDram;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
AmdCreateStruct (&AmdParamStruct);
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
MidParam = (AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr;
MidParam->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
MidParam->GnbMidConfiguration.GnbIoapicAddress = 0xFEC20000;
MidParam->FchInterface.AzaliaController = AzEnable;
MidParam->FchInterface.SataClass = CONFIG_HUDSON_SATA_MODE;
MidParam->FchInterface.SataEnable = !((CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3));
MidParam->FchInterface.IdeEnable = (CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3);
MidParam->FchInterface.SataIdeMode = (CONFIG_HUDSON_SATA_MODE == 3);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
AmdReleaseStruct (&AmdParamStruct);
return status;
}
amd/olivehillplus: No global variables for romstage These functions are only used for ramstage. Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7148 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-22 05:42:57 +02:00
#ifndef __PRE_RAM__
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AGESA_STATUS agesawrapper_amdinitlate(void)
{
AGESA_STATUS Status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_LATE_PARAMS *AmdLateParams;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
AmdParamStruct.AllocationMethod = PostMemDram;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
/* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
AmdCreateStruct(&AmdParamStruct);
AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
Status = AmdInitLate(AmdLateParams);
if (Status != AGESA_SUCCESS) {
agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
ASSERT(Status == AGESA_SUCCESS);
}
DmiTable = AmdLateParams->DmiTable;
AcpiPstate = AmdLateParams->AcpiPState;
AMD Merlin Falcon: Add northbridge files for new AMD processor Tested on Bettong. Windows 7, Windows 8.1 and Ubuntu 14.04 can boot. Change-Id: Ifcbfa0eab74875638a40e74ba2a3bb7c4fb02761 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10419 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-20 08:44:32 +02:00
#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_PI_00630F01) || IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_PI_00730F01)
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AcpiSrat = AmdLateParams->AcpiSrat;
AcpiSlit = AmdLateParams->AcpiSlit;
AMD Merlin Falcon: Add northbridge files for new AMD processor Tested on Bettong. Windows 7, Windows 8.1 and Ubuntu 14.04 can boot. Change-Id: Ifcbfa0eab74875638a40e74ba2a3bb7c4fb02761 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10419 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-20 08:44:32 +02:00
#endif
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AcpiWheaMce = AmdLateParams->AcpiWheaMce;
AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
AcpiAlib = AmdLateParams->AcpiAlib;
AcpiIvrs = AmdLateParams->AcpiIvrs;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
AcpiCrat = AmdLateParams->AcpiCrat;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
"AcpiSlit:%x, Mce:%x, Cmc:%x,"
"Alib:%x, AcpiIvrs:%x in %s\n",
(unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
(unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
(unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
/* AmdReleaseStruct (&AmdParamStruct); */
return Status;
}
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#endif /* #ifndef __PRE_RAM__ */
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AGESA_STATUS agesawrapper_amdlaterunaptask (
UINT32 Func,
UINT32 Data,
VOID *ConfigPtr
)
{
AGESA_STATUS Status;
AP_EXE_PARAMS ApExeParams;
LibAmdMemFill (&ApExeParams,
0,
sizeof (AP_EXE_PARAMS),
&(ApExeParams.StdHeader));
ApExeParams.StdHeader.AltImageBasePtr = 0;
ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
ApExeParams.StdHeader.Func = 0;
ApExeParams.StdHeader.ImageBasePtr = 0;
ApExeParams.FunctionNumber = Func;
ApExeParams.RelatedDataBlock = ConfigPtr;
Status = AmdLateRunApTask (&ApExeParams);
if (Status != AGESA_SUCCESS) {
/* agesawrapper_amdreadeventlog(); */
ASSERT(Status == AGESA_SUCCESS);
}
return Status;
}
#if CONFIG_HAVE_ACPI_RESUME
AGESA_STATUS agesawrapper_amdinitresume(void)
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_RESUME_PARAMS *AmdResumeParamsPtr;
S3_DATA_TYPE S3DataType;
LibAmdMemFill (&AmdParamStruct,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
AmdParamStruct.AllocationMethod = PreMemHeap;
AmdParamStruct.StdHeader.AltImageBasePtr = 0;
AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdParamStruct.StdHeader.Func = 0;
AmdParamStruct.StdHeader.ImageBasePtr = 0;
AmdCreateStruct (&AmdParamStruct);
AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
S3DataType = S3DataTypeNonVolatile;
OemAgesaGetS3Info (S3DataType,
(u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
(void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
AmdReleaseStruct (&AmdParamStruct);
return status;
}
#ifndef __PRE_RAM__
AGESA_STATUS agesawrapper_fchs3earlyrestore(void)
{
AGESA_STATUS status = AGESA_SUCCESS;
FCH_DATA_BLOCK FchParams;
AMD_CONFIG_PARAMS StdHeader;
StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
StdHeader.AltImageBasePtr = 0;
StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
StdHeader.Func = 0;
StdHeader.ImageBasePtr = 0;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
LibAmdMemFill (&FchParams,
0,
sizeof (FchParams),
&StdHeader);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
FchParams.StdHeader = &StdHeader;
s3_resume_init_data(&FchParams);
FchInitS3EarlyRestore(&FchParams);
return status;
}
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
#endif /* #ifndef __PRE_RAM__ */
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
AGESA_STATUS agesawrapper_amds3laterestore(void)
{
AGESA_STATUS Status;
AMD_INTERFACE_PARAMS AmdInterfaceParams;
AMD_S3LATE_PARAMS AmdS3LateParams;
AMD_S3LATE_PARAMS *AmdS3LateParamsPtr;
S3_DATA_TYPE S3DataType;
agesawrapper_amdinitcpuio();
LibAmdMemFill (&AmdS3LateParams,
0,
sizeof (AMD_S3LATE_PARAMS),
&(AmdS3LateParams.StdHeader));
AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
AmdInterfaceParams.AllocationMethod = ByHost;
AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdS3LateParamsPtr = &AmdS3LateParams;
AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
AmdCreateStruct (&AmdInterfaceParams);
AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
S3DataType = S3DataTypeVolatile;
OemAgesaGetS3Info (S3DataType,
(u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
(void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
Status = AmdS3LateRestore (AmdS3LateParamsPtr);
if (Status != AGESA_SUCCESS) {
agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
ASSERT(Status == AGESA_SUCCESS);
}
return Status;
}
#ifndef __PRE_RAM__
AGESA_STATUS agesawrapper_fchs3laterestore(void)
{
AGESA_STATUS status = AGESA_SUCCESS;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
AMD_CONFIG_PARAMS StdHeader;
FCH_DATA_BLOCK FchParams;
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
StdHeader.AltImageBasePtr = 0;
StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
StdHeader.Func = 0;
StdHeader.ImageBasePtr = 0;
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
LibAmdMemFill (&FchParams,
0,
sizeof (FchParams),
&StdHeader);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
FchParams.StdHeader = &StdHeader;
s3_resume_init_data(&FchParams);
FchInitS3LateRestore(&FchParams);
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
/* PIC IRQ routine */
for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
outb(byte, 0xC00);
outb(picr_data[byte], 0xC01);
}
/* APIC IRQ routine */
for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
outb(byte | 0x80, 0xC00);
outb(intr_data[byte], 0xC01);
}
return status;
}
AGESA_STATUS agesawrapper_amdS3Save(void)
{
AGESA_STATUS Status;
AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
AMD_INTERFACE_PARAMS AmdInterfaceParams;
S3_DATA_TYPE S3DataType;
LibAmdMemFill (&AmdInterfaceParams,
0,
sizeof (AMD_INTERFACE_PARAMS),
&(AmdInterfaceParams.StdHeader));
AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdInterfaceParams.AllocationMethod = PostMemDram;
AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
AmdInterfaceParams.StdHeader.Func = 0;
AmdCreateStruct(&AmdInterfaceParams);
AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
Status = AmdS3Save(AmdS3SaveParamsPtr);
if (Status != AGESA_SUCCESS) {
agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
ASSERT(Status == AGESA_SUCCESS);
}
S3DataType = S3DataTypeNonVolatile;
printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
(unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
(unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
northbridge/amd/pi: Create common agesawrapper.c This removes the mainboard agesawrapper.c file from binarypi based boards and creates a common one. Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-12 20:41:44 +01:00
Status = OemAgesaSaveS3Info (
S3DataType,
AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC Create a new mainboard based on the AMD DB-FT3 development board (Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3 and DB-FT3b mainboards are identical except for the soldered-down SoC device. The new AMD DB-FT3b development board (Olive Hill+) features: * Mini-ITX form factor * 2x DisplayPort * 1x VGA * Integrated Realtek RTL8111-compatible Ethernet * 2x USB 3.0 ports * 2x USB 2.0 externally-accessible ports * 2x USB 2.0 internally-accessible ports (via headers) * micro LPC header * Integrated platform security processor * 2x Full-size DDR3 DIMM support (1 channel) * Realtek ALC272 HD audio * 2x SATA ports * 1x SD card slot * 1x PCIe (x4) slot * 1x mini-PCIe slot * 8-pin programming header Eliminate the extraneous headers included in PlatformGnbPcie. BiosCallOuts normally has a bunch of extraneous references to the mainboard name. Rather than correct the spelling of a bunch of instances, just get rid of them. For the most part, use the Olive Hill ACPI definitions since the DB-FT3b board ("Olive Hill+") and Olive Hill are the same board with different processors. Change some function prototypes for functions without parameters to void instead of AGESA's VOID. There are no parameters for these functions, so there is no real reason to use VOID. S3 and fan control are not supported. HD audio is not working. Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6681 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-08-15 20:38:21 +02:00
printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
(unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
(unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
S3DataType = S3DataTypeVolatile;
Status = OemAgesaSaveS3Info (
S3DataType,
AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
}
OemAgesaSaveMtrr();
AmdReleaseStruct (&AmdInterfaceParams);
return Status;
}
#endif /* #ifndef __PRE_RAM__ */
#endif /* CONFIG_HAVE_ACPI_RESUME */
AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus)
{
AGESA_STATUS Status;
EVENT_PARAMS AmdEventParams;
LibAmdMemFill (&AmdEventParams,
0,
sizeof (EVENT_PARAMS),
&(AmdEventParams.StdHeader));
AmdEventParams.StdHeader.AltImageBasePtr = 0;
AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
AmdEventParams.StdHeader.Func = 0;
AmdEventParams.StdHeader.ImageBasePtr = 0;
AmdEventParams.StdHeader.HeapStatus = HeapStatus;
Status = AmdReadEventLog (&AmdEventParams);
while (AmdEventParams.EventClass != 0) {
printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
Status = AmdReadEventLog (&AmdEventParams);
}
return Status;
}
amd/pi: Move AGESA cbfs access into the wrapper The AGESA.c file in 3rdparty has cbfs access functions for locating the AGESA binaries. coreboot access functions need to be within coreboot where they can be updated with cbfs changes. Move the offending function to coreboot. Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10058 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-05 17:55:57 +02:00
const void *agesawrapper_locate_module (const CHAR8 name[8])
{
const void* agesa;
const AMD_IMAGE_HEADER* image;
const AMD_MODULE_HEADER* module;
size_t file_size;
cbfs: new API and better program loading A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-16 06:39:23 +02:00
agesa = cbfs_boot_map_with_leak((const char *)CONFIG_CBFS_AGESA_NAME,
CBFS_TYPE_RAW, &file_size);
amd/pi: Move AGESA cbfs access into the wrapper The AGESA.c file in 3rdparty has cbfs access functions for locating the AGESA binaries. coreboot access functions need to be within coreboot where they can be updated with cbfs changes. Move the offending function to coreboot. Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10058 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-05 17:55:57 +02:00
if (!agesa)
return NULL;
image = LibAmdLocateImage(agesa, agesa + file_size - 1, 4096, name);
module = (AMD_MODULE_HEADER*)image->ModuleInfoOffset;
return module;
}
Reference in a new issue Copy permalink