coreboot-kgpe-d16/Makefile.inc

627 lines
25 KiB
PHP
Raw Normal View History

##
## This file is part of the coreboot project.
##
## Copyright (C) 2011 secunet Security Networks AG
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
GIT:=$(shell [ -d "$(top)/.git" ] && command -v git)
#######################################################################
# misleadingly named, this is the coreboot version
export KERNELVERSION := $(strip $(if $(GIT),\
$(shell git describe --dirty --always || git describe),\
4.0$(KERNELREVISION)))
#######################################################################
# Test for coreboot toolchain (except when explicitely not requested)
ifneq ($(NOCOMPILE),1)
# only run if we're doing a build (not for tests, kconfig, ...), using gcc
# rationale: gcc versions by Linux distributions tend to be quite messed up
ifeq ($(CONFIG_COMPILER_GCC),y)
ifneq ($(CONFIG_ANY_TOOLCHAIN),y)
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
_toolchain=$(shell $(CC_x86_32) -v 2>&1 |grep -q "gcc version .*coreboot toolchain" && echo coreboot)
ifneq ($(_toolchain),coreboot)
$(error Please use the coreboot toolchain (or prove that your toolchain works))
endif
endif
endif
endif
#######################################################################
# Basic component discovery
MAINBOARDDIR=$(call strip_quotes,$(CONFIG_MAINBOARD_DIR))
export MAINBOARDDIR
## Final build results, which CBFSTOOL uses to create the final
## rom image file, are placed under $(objcbfs).
## These typically have suffixes .debug .elf .bin and .map
export objcbfs := $(obj)/cbfs/$(call strip_quotes,$(CONFIG_CBFS_PREFIX))
## Based on the active configuration, Makefile conditionally collects
## the required assembly includes and saves them in a file.
## Such files that do not have a clear one-to-one relation to a source
## file under src/ are placed and built under $(objgenerated)
export objgenerated := $(obj)/generated
#######################################################################
# root rule to resolve if in build mode (ie. configuration exists)
real-target: $(obj)/config.h coreboot
coreboot: build-dirs $(obj)/coreboot.rom $(obj)/cbfstool $(obj)/rmodtool
#######################################################################
# our phony targets
PHONY+= clean-abuild coreboot lint lint-stable build-dirs
#######################################################################
# root source directories of coreboot
subdirs-y := src/lib src/console src/device src/ec src/southbridge src/soc
subdirs-y += src/northbridge src/superio src/drivers src/cpu src/vendorcode
subdirs-y += util/cbfstool util/sconfig util/nvramtool
subdirs-y += src/arch/arm src/arch/arm64 src/arch/x86 src/arch/riscv
subdirs-y += src/mainboard/$(MAINBOARDDIR)
subdirs-y += site-local
#######################################################################
# Add source classes and their build options
classes-y := ramstage romstage bootblock smm smmstub cpu_microcode verstage
# Add dynamic classes for rmodules
$(foreach supported_arch,$(ARCH_SUPPORTED), \
$(eval $(call define_class,rmodules_$(supported_arch),$(supported_arch))))
#######################################################################
# Helper functions for various file placement matters
#
# int-add: adds an arbitrary number of space-separated integers in
# all formats understood by printf(1)
# int-align: align $1 to $2 units
# file-size: returns the filesize of the given file
_toint=$(shell printf "%d" $1)
_int-add2=$(shell expr $(call _toint,$1) + $(call _toint,$2))
int-add=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-add,$(call _int-add2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
int-align=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A + \( \( $$B - \( $$A % $$B \) \) % $$B \) )
file-size=$(shell cat $1 | wc -c)
#######################################################################
# Helper functions for ramstage postprocess
spc :=
spc +=
$(spc) :=
$(spc) +=
# files-in-dir-recursive,dir,files
files-in-dir-recursive=$(filter $(1)%,$(2))
# parent-dir,dir/
parent-dir=$(dir $(if $(patsubst /%,,$(1)),,/)$(subst $( ),/,$(strip $(subst /, ,$(1)))))
# filters out exactly the directory specified
# filter-out-dir,dir_to_keep,dirs
filter-out-dir=$(filter-out $(1),$(2))
# filters out dir_to_keep and all its parents
# filter-out-dirs,dir_to_keep,dirs
filter-out-dirs=$(if $(filter-out ./ /,$(1)),$(call filter-out-dirs,$(call parent-dir,$(1)),$(call filter-out-dir,$(1),$(2))),$(call filter-out-dir,$(1),$(2)))
# dir-wildcards,dirs
dir-wildcards=$(addsuffix %,$(1))
# files-in-dir,dir,files
files-in-dir=$(filter-out $(call dir-wildcards,$(call filter-out-dirs,$(1),$(sort $(dir $(2))))),$(call files-in-dir-recursive,$(1),$(2)))
#######################################################################
# reduce command line length by linking the objects of each
# directory into an intermediate file
ramstage-postprocess=$(foreach d,$(sort $(dir $(1))), \
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(eval $(d)ramstage.o: $(call files-in-dir,$(d),$(1)); $$(LD_ramstage) -o $$@ -r $$^ ) \
$(eval ramstage-objs:=$(d)ramstage.o $(filter-out $(call files-in-dir,$(d),$(1)),$(ramstage-objs))))
verstage-c-ccopts:=-D__PRE_RAM__ -D__VER_STAGE__
verstage-S-ccopts:=-D__PRE_RAM__ -D__VER_STAGE__
romstage-c-ccopts:=-D__PRE_RAM__
romstage-S-ccopts:=-D__PRE_RAM__
ifeq ($(CONFIG_TRACE),y)
ramstage-c-ccopts:= -finstrument-functions
endif
ifeq ($(CONFIG_COVERAGE),y)
ramstage-c-ccopts+=-fprofile-arcs -ftest-coverage
endif
# try to fetch non-optional submodules if the source is under git
forgetthis:=$(if $(GIT),$(shell git submodule update --init))
ifeq ($(CONFIG_USE_BLOBS),y)
# this is necessary because 3rdparty is update=none, and so is ignored
# unless explicitly requested and enabled through --checkout
forgetthis:=$(if $(GIT),$(shell git submodule update --init --checkout 3rdparty))
endif
bootblock-c-ccopts:=-D__BOOT_BLOCK__ -D__PRE_RAM__
bootblock-S-ccopts:=-D__BOOT_BLOCK__ -D__PRE_RAM__
smmstub-c-ccopts:=-D__SMM__
smmstub-S-ccopts:=-D__SMM__
smm-c-ccopts:=-D__SMM__
smm-S-ccopts:=-D__SMM__
# SMM TSEG base is dynamic
x86: SMM Module Support Add support for SMM modules by leveraging the RMODULE lib. This allows for easier dynamic SMM handler placement. The SMM module support consists of a common stub which puts the executing CPU into protected mode and calls into a pre-defined handler. This stub can then be used for SMM relocation as well as the real SMM handler. For the relocation one can call back into coreboot ramstage code to perform relocation in C code. The handler is essentially a copy of smihandler.c, but it drops the TSEG differences. It also doesn't rely on the SMM revision as the cpu code should know what processor it is supported. Ideally the CONFIG_SMM_TSEG option could be removed once the existing users of that option transitioned away from tseg_relocate() and smi_get_tseg_base(). The generic SMI callbacks are now not marked as weak in the declaration so that there aren't unlinked references. The handler has default implementations of the generic SMI callbacks which are marked as weak. If an external compilation module has a strong symbol the linker will use that instead of the link one. Additionally, the parameters to the generic callbacks are dropped as they don't seem to be used directly. The SMM runtime can provide the necessary support if needed. Change-Id: I1e2fed71a40b2eb03197697d29e9c4b246e3b25e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-04 00:38:47 +01:00
ifneq ($(CONFIG_SMM_MODULES),y)
ifeq ($(CONFIG_SMM_TSEG),y)
smm-c-ccopts += -fpic
endif
x86: SMM Module Support Add support for SMM modules by leveraging the RMODULE lib. This allows for easier dynamic SMM handler placement. The SMM module support consists of a common stub which puts the executing CPU into protected mode and calls into a pre-defined handler. This stub can then be used for SMM relocation as well as the real SMM handler. For the relocation one can call back into coreboot ramstage code to perform relocation in C code. The handler is essentially a copy of smihandler.c, but it drops the TSEG differences. It also doesn't rely on the SMM revision as the cpu code should know what processor it is supported. Ideally the CONFIG_SMM_TSEG option could be removed once the existing users of that option transitioned away from tseg_relocate() and smi_get_tseg_base(). The generic SMI callbacks are now not marked as weak in the declaration so that there aren't unlinked references. The handler has default implementations of the generic SMI callbacks which are marked as weak. If an external compilation module has a strong symbol the linker will use that instead of the link one. Additionally, the parameters to the generic callbacks are dropped as they don't seem to be used directly. The SMM runtime can provide the necessary support if needed. Change-Id: I1e2fed71a40b2eb03197697d29e9c4b246e3b25e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-04 00:38:47 +01:00
endif
ramstage-c-deps:=$$(OPTION_TABLE_H)
romstage-c-deps:=$$(OPTION_TABLE_H)
verstage-c-deps:=$$(OPTION_TABLE_H)
bootblock-c-deps:=$$(OPTION_TABLE_H)
smm-c-deps:=$$(OPTION_TABLE_H)
#######################################################################
# Add handler to compile ACPI's ASL
define ramstage-objs_asl_template
$(obj)/$(1).ramstage.o: src/$(1).asl $(obj)/config.h
@printf " IASL $$(subst $(top)/,,$$(@))\n"
$(CC_ramstage) -x assembler-with-cpp -E -MMD -MT $$(@) -D__ACPI__ -P -include $(src)/include/kconfig.h -I$(obj) -I$(src) -I$(src)/include -I$(src)/arch/$(ARCHDIR-$(ARCH-ramstage-y))/include -I$(src)/mainboard/$(MAINBOARDDIR) $$< -o $$(basename $$@).asl
cd $$(dir $$@); $(IASL) -p $$(notdir $$@) -tc $$(notdir $$(basename $$@)).asl
mv $$(basename $$@).hex $$(basename $$@).c
$(CC_ramstage) $$(CFLAGS_ramstage) $$(CPPFLAGS_ramstage) $$(if $$(subst dsdt,,$$(basename $$(notdir $(1)))), -DAmlCode=AmlCode_$$(basename $$(notdir $(1)))) -c -o $$@ $$(basename $$@).c
# keep %.o: %.c rule from catching the temporary .c file after a make clean
mv $$(basename $$@).c $$(basename $$@).hex
endef
#######################################################################
# Parse plaintext cmos defaults into binary format
# arg1: source file
# arg2: binary file name
cbfs-files-processor-nvramtool= \
$(eval $(2): $(1) $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout | $(objutil)/nvramtool/nvramtool ; \
printf " CREATE $(2) (from $(1))\n"; $(objutil)/nvramtool/nvramtool -y $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout -D $(2).tmp -p $(1) && mv $(2).tmp $(2))
#######################################################################
# Link VSA binary to ELF-ish stage
# arg1: source file
# arg2: binary file name
cbfs-files-processor-vsa= \
$(eval $(2): $(1) ; \
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
printf " CREATE $(2) (from $(1))\n"; $(OBJCOPY_ramstage) --set-start 0x20 --adjust-vma 0x60000 -I binary -O elf32-i386 -B i386 $(1) $(2).tmp && $(LD_ramstage) -m elf_i386 -e 0x60020 --section-start .data=0x60000 $(2).tmp -o $(2))
#######################################################################
# Add handler for arbitrary files in CBFS
$(call add-special-class,cbfs-files)
cbfs-files-handler= \
$(eval tmp-cbfs-method:=$(word 2, $(subst :, ,$($(2)-file)))) \
$(eval $(2)-file:=$(call strip_quotes,$(word 1, $(subst :, ,$($(2)-file))))) \
$(if $(wildcard $(1)$($(2)-file)), \
$(eval tmp-cbfs-file:= $(wildcard $(1)$($(2)-file))), \
$(eval tmp-cbfs-file:= $($(2)-file))) \
$(if $(strip $($(2)-required)), \
$(if $(wildcard $(tmp-cbfs-file)),, \
$(info This build configuration requires $($(2)-required)) \
$(eval FAILBUILD:=1) \
)) \
$(if $(strip $($(2)-align)), \
$(if $(strip $($(2)-position)), \
$(info ERROR: It is not allowed to specify both alignment and position for $($(2)-file)) \
$(eval FAILBUILD:=1) \
)) \
$(if $(tmp-cbfs-method), \
$(eval tmp-old-cbfs-file:=$(tmp-cbfs-file)) \
$(eval tmp-cbfs-file:=$(shell mkdir -p $(obj)/mainboard/$(MAINBOARDDIR); mktemp $(obj)/mainboard/$(MAINBOARDDIR)/cbfs-file.XXXXXX).out) \
$(call cbfs-files-processor-$(tmp-cbfs-method),$(tmp-old-cbfs-file),$(tmp-cbfs-file))) \
$(eval cbfs-files += $(tmp-cbfs-file)|$(2)|$($(2)-type)|$($(2)-compression)|$(strip $($(2)-position))|$($(2)-align))\
$(eval $(2)-name:=) \
$(eval $(2)-type:=) \
$(eval $(2)-compression:=) \
$(eval $(2)-position:=) \
$(eval $(2)-required:=) \
$(eval $(2)-align:=)
#######################################################################
# a variety of flags for our build
CBFS_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESS_RAMSTAGE),y)
CBFS_COMPRESS_FLAG:=LZMA
endif
CBFS_PAYLOAD_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y)
CBFS_PAYLOAD_COMPRESS_FLAG:=LZMA
endif
ifneq ($(CONFIG_LOCALVERSION),"")
export COREBOOT_EXTRA_VERSION := -$(call strip_quotes,$(CONFIG_LOCALVERSION))
endif
CPPFLAGS_common := -Isrc -Isrc/include -I$(obj)
CPPFLAGS_common += -Isrc/device/oprom/include
CPPFLAGS_common += -include $(src)/include/kconfig.h
CFLAGS_common += -pipe -g -nostdinc
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
CFLAGS_common += -nostdlib -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes
CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs
CFLAGS_common += -Wstrict-aliasing -Wshadow
ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y)
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
CFLAGS_common += -Werror
endif
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer
ifneq ($(GDB_DEBUG),)
CFLAGS_common += -O0
else
CFLAGS_common += -Os
endif
additional-dirs := $(objutil)/cbfstool $(objutil)/romcc $(objutil)/ifdtool \
$(objutil)/ifdfake $(objutil)/options $(objutil)/fletcher \
$(objutil)/cbootimage
#######################################################################
# generate build support files
$(obj)/build.h: .xcompile
@printf " GEN build.h\n"
rm -f $(obj)/build.h
util/genbuild_h/genbuild_h.sh > $(obj)/build.ht
mv $(obj)/build.ht $(obj)/build.h
$(obj)/ldoptions: $(obj)/config.h
awk '/^#define ([^"])* ([^"])*$$/ {gsub("\\r","",$$3); print $$2 " = " $$3 ";";}' $< > $@
build-dirs:
mkdir -p $(objcbfs) $(objgenerated)
#######################################################################
# Build the tools
CBFSTOOL:=$(objutil)/cbfstool/cbfstool
RMODTOOL:=$(objutil)/cbfstool/rmodtool
$(obj)/cbfstool: $(CBFSTOOL)
cp $< $@
$(obj)/rmodtool: $(RMODTOOL)
cp $< $@
_WINCHECK=$(shell uname -o 2> /dev/null)
STACK=
ifeq ($(_WINCHECK),Msys)
STACK=-Wl,--stack,16384000
endif
ifeq ($(_WINCHECK),Cygwin)
STACK=-Wl,--stack,16384000
endif
# this allows ccache to prepend itself
# (ccache handling happens first)
ROMCC_BIN= $(objutil)/romcc/romcc
ROMCC?=$(ROMCC_BIN)
$(ROMCC_BIN): $(top)/util/romcc/romcc.c
@printf " HOSTCC $(subst $(obj)/,,$(@)) (this may take a while)\n"
@# Note: Adding -O2 here might cause problems. For details see:
@# http://www.coreboot.org/pipermail/coreboot/2010-February/055825.html
$(HOSTCC) -g $(STACK) -Wall -o $@ $<
IFDTOOL:=$(objutil)/ifdtool/ifdtool
$(IFDTOOL): $(top)/util/ifdtool/ifdtool.c
@printf " HOSTCC $(subst $(obj)/,,$(@))\n"
$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
IFDFAKE:=$(objutil)/ifdfake/ifdfake
$(IFDFAKE): $(top)/util/ifdfake/ifdfake.c
@printf " HOSTCC $(subst $(obj)/,,$(@))\n"
$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
FLETCHER:=$(objutil)/fletcher/fletcher
$(FLETCHER): $(top)/util/fletcher/fletcher.c
@printf " HOSTCC $(subst $(obj)/,,$(@))\n"
$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
CBOOTIMAGE:=$(objutil)/cbootimage/cbootimage
subdirs-y += util/nvidia
#######################################################################
# needed objects that every mainboard uses
# Creation of these is architecture and mainboard independent
$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/devicetree.cb $(objutil)/sconfig/sconfig
@printf " SCONFIG $(subst $(src)/,,$(<))\n"
mkdir -p $(obj)/mainboard/$(MAINBOARDDIR)
$(objutil)/sconfig/sconfig $(MAINBOARDDIR) $(obj)/mainboard/$(MAINBOARDDIR)
ramstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
Make the device tree available in the rom stage We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-01 01:47:25 +02:00
romstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
$(objutil)/%.o: $(objutil)/%.c
@printf " HOSTCC $(subst $(objutil)/,,$(@))\n"
$(HOSTCC) -MMD -I$(subst $(objutil)/,util/,$(dir $<)) -I$(dir $<) $(HOSTCFLAGS) -c -o $@ $<
$(obj)/%.ramstage.o $(abspath $(obj))/%.ramstage.o: $(obj)/%.c $(obj)/config.h $(OPTION_TABLE_H)
@printf " CC $(subst $(obj)/,,$(@))\n"
$(CC_ramstage) -MMD $(CFLAGS_ramstage) $(CPPFLAGS_ramstage) $(ramstage-c-ccopts) -c -o $@ $<
Make the device tree available in the rom stage We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-01 01:47:25 +02:00
$(obj)/%.romstage.o $(abspath $(obj))/%.romstage.o: $(obj)/%.c $(obj)/config.h $(OPTION_TABLE_H)
@printf " CC $(subst $(obj)/,,$(@))\n"
$(CC_romstage) -MMD $(CFLAGS_romstage) $(CPPFLAGS_romstage) $(romstage-c-ccopts) -c -o $@ $<
Make the device tree available in the rom stage We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-01 01:47:25 +02:00
$(obj)/%.verstage.o $(abspath $(obj))/%.verstage.o: $(obj)/%.c $(obj)/config.h $(OPTION_TABLE_H)
@printf " CC $(subst $(obj)/,,$(@))\n"
$(CC_verstage) -MMD $(CFLAGS_verstage) $(verstage-c-ccopts) -c -o $@ $<
$(obj)/%.bootblock.o $(abspath $(obj))/%.bootblock.o: $(obj)/%.c $(obj)/config.h $(OPTION_TABLE_H)
@printf " CC $(subst $(obj)/,,$(@))\n"
$(CC_bootblock) -MMD $(CFLAGS_bootblock) $(CPPFLAGS_bootblock) $(bootblock-c-ccopts) -c -o $@ $<
#######################################################################
# Clean up rules
clean-abuild:
rm -rf coreboot-builds
clean-for-update-target:
rm -f $(obj)/ramstage* $(obj)/coreboot.romstage $(obj)/coreboot.pre* $(obj)/coreboot.bootblock $(obj)/coreboot.a
rm -rf $(obj)/bootblock* $(obj)/romstage* $(obj)/location.*
rm -f $(obj)/option_table.* $(obj)/crt0.S $(obj)/ldscript
rm -f $(obj)/mainboard/$(MAINBOARDDIR)/static.c $(obj)/mainboard/$(MAINBOARDDIR)/config.py $(obj)/mainboard/$(MAINBOARDDIR)/static.dot
rm -f $(obj)/mainboard/$(MAINBOARDDIR)/crt0.s $(obj)/mainboard/$(MAINBOARDDIR)/crt0.disasm
rm -f $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc
rm -f $(obj)/mainboard/$(MAINBOARDDIR)/bootblock.* $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.*
rm -f $(obj)/cpu/x86/smm/smm_bin.c $(obj)/cpu/x86/smm/smm.* $(obj)/cpu/x86/smm/smm
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(MAKE) -C payloads/external/SeaBIOS -f Makefile.inc clean OUT=$(abspath $(obj)) HOSTCC="$(HOSTCC)" CC="$(CC_x86_32)" LD="$(LD_x86_32)"
clean-target:
rm -f $(obj)/coreboot*
#######################################################################
# Development utilities
printcrt0s:
@echo crt0s=$(crt0s)
@echo ldscripts=$(ldscripts)
update:
dongle.py -c /dev/term/1 $(obj)/coreboot.rom EOF
lint lint-stable:
FAILED=0; LINTLOG=`mktemp .tmpconfig.lintXXXXX`; \
for script in util/lint/$@-*; do \
echo; echo `basename $$script`; \
grep "^# DESCR:" $$script | sed "s,.*DESCR: *,," ; \
echo ========; \
$$script > $$LINTLOG; \
if [ `cat $$LINTLOG | wc -l` -eq 0 ]; then \
printf "success\n\n"; \
else \
echo test failed: ; \
cat $$LINTLOG; \
rm -f $$LINTLOG; \
FAILED=$$(( $$FAILED + 1 )); \
fi; \
echo ========; \
done; \
test $$FAILED -eq 0 || { echo "ERROR: $$FAILED test(s) failed."; rm -f $$LINTLOG && exit 1; }; \
rm -f $$LINTLOG
gitconfig:
[ -d .git ]
mkdir -p .git/hooks
for hook in commit-msg pre-commit ; do \
if [ util/gitconfig/$$hook -nt .git/hooks/$$hook -o \
! -x .git/hooks/$$hook ]; then \
cp util/gitconfig/$$hook .git/hooks/$$hook; \
chmod +x .git/hooks/$$hook; \
fi; \
done
git config remote.origin.push HEAD:refs/for/master
(git config --global user.name >/dev/null && git config --global user.email >/dev/null) || (printf 'Please configure your name and email in git:\n\n git config --global user.name "Your Name Comes Here"\n git config --global user.email your.email@example.com\n'; exit 1)
crossgcc: crossgcc-i386 crossgcc-arm crossgcc-aarch64 crossgcc-mips crossgcc-riscv
.PHONY: crossgcc-i386 crossgcc-arm crossgcc-aarch64 crossgcc-mips crossgcc-riscv
crossgcc-i386: clean-for-update
$(MAKE) -C util/crossgcc build-i386-without-gdb
crossgcc-arm: clean-for-update
$(MAKE) -C util/crossgcc build-armv7a-without-gdb
crossgcc-aarch64: clean-for-update
$(MAKE) -C util/crossgcc build-aarch64-without-gdb
crossgcc-mips: clean-for-update
$(MAKE) -C util/crossgcc build-mips-without-gdb
crossgcc-riscv: clean-for-update
$(MAKE) -C util/crossgcc build-riscv-without-gdb
crosstools: crosstools-i386 crosstools-arm crosstools-aarch64 crosstools-mips crosstools-riscv
.PHONY: crosstools-i386 crosstools-arm crosstools-aarch64 crosstools-mips crosstools-riscv
crosstools-i386: clean-for-update
$(MAKE) -C util/crossgcc build-i386
crosstools-arm: clean-for-update
$(MAKE) -C util/crossgcc build-armv7a
crosstools-aarch64: clean-for-update
$(MAKE) -C util/crossgcc build-aarch64
crosstools-mips: clean-for-update
$(MAKE) -C util/crossgcc build-mips
crosstools-riscv: clean-for-update
$(MAKE) -C util/crossgcc build-riscv
crossgcc-clean: clean-for-update
$(MAKE) -C util/crossgcc clean
tools: $(objutil)/kconfig/conf $(objutil)/cbfstool/cbfstool $(objutil)/cbfstool/rmodtool $(objutil)/nvramtool/nvramtool $(ROMCC_BIN) $(objutil)/sconfig/sconfig $(IFDTOOL) $(IFDFAKE) $(CBOOTIMAGE)
###########################################################################
# Common recipes for all stages
###########################################################################
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
# find-substr is required for stages like romstage_null and romstage_xip to
# eliminate the _* part of the string
find-substr = $(word 1,$(subst _, ,$(1)))
# find-class is used to identify the class from the name of the stage
# The input to this macro can be something like romstage.x or romstage.x.y
# find-class recursively strips off the suffixes to extract the exact class name
# e.g.: if romstage.x is provided to find-class, it will remove .x and return romstage
# if romstage.x.y is provided, it will first remove .y, call find-class with romstage.x
# and remove .x the next time and finally return romstage
find-class = $(if $(filter $(1),$(basename $(1))),$(if $(CC_$(1)), $(1), $(call find-substr,$(1))),$(call find-class,$(basename $(1))))
$(objcbfs)/%.bin: $(objcbfs)/%.elf
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(eval class := $(call find-class,$(@F)))
@printf " OBJCOPY $(subst $(obj)/,,$(@))\n"
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(OBJCOPY_$(class)) -O binary $< $@
$(objcbfs)/%.elf: $(objcbfs)/%.debug
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(eval class := $(call find-class,$(@F)))
@printf " OBJCOPY $(subst $(obj)/,,$(@))\n"
cp $< $@.tmp
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(NM_$(class)) -n $@.tmp | sort > $(basename $@).map
$(OBJCOPY_$(class)) --strip-debug $@.tmp
$(OBJCOPY_$(class)) --add-gnu-debuglink=$< $@.tmp
mv $@.tmp $@
###########################################################################
# Build the final rom image
###########################################################################
COREBOOT_ROM_DEPENDENCIES:=
ifeq ($(CONFIG_PAYLOAD_ELF),y)
COREBOOT_ROM_DEPENDENCIES+=$(CONFIG_PAYLOAD_FILE)
endif
ifeq ($(CONFIG_PAYLOAD_SEABIOS),y)
COREBOOT_ROM_DEPENDENCIES+=seabios
endif
ifeq ($(CONFIG_PAYLOAD_FILO),y)
COREBOOT_ROM_DEPENDENCIES+=filo
endif
ifeq ($(CONFIG_PAYLOAD_GRUB2),y)
COREBOOT_ROM_DEPENDENCIES+=grub2
endif
extract_nth=$(patsubst -%-,%,$(word $(1), $(subst |,- -,-$(2)-)))
cbfs-add-cmd = \
$(CBFSTOOL) $@.tmp \
add$(if $(filter stage,$(call extract_nth,3,$(file))),-stage)$(if $(filter payload,$(call extract_nth,3,$(file))),-payload) \
-f $(call extract_nth,1,$(file)) \
-n $(call extract_nth,2,$(file)) $(if $(filter-out stage,$(call extract_nth,3,$(file))),-t $(call extract_nth,3,$(file)))
ifneq ($(CONFIG_UPDATE_IMAGE),y)
prebuild-files = \
$(foreach file,$(cbfs-files), \
$(if $(call extract_nth,6,$(file)),$(CBFSTOOL) $@.tmp locate -f $(call extract_nth,1,$(file)) -n $(call extract_nth,2,$(file)) -a $(call extract_nth,6,$(file))|xargs -i \
$(cbfs-add-cmd) -b {} &&,\
$(cbfs-add-cmd) $(if $(call extract_nth,5,$(file)),-b $(call extract_nth,5,$(file))) &&))
prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file)))
$(obj)/coreboot.pre1: $(objcbfs)/bootblock.bin $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file)
$(CBFSTOOL) $@.tmp create -s $(CONFIG_COREBOOT_ROMSIZE_KB)K \
-B $(objcbfs)/bootblock.bin -a 64 \
$(CBFSTOOL_PRE1_OPTS)
$(prebuild-files) true
$(call add-cpu-microcode-to-cbfs,$@.tmp)
mv $@.tmp $@
else
.PHONY: $(obj)/coreboot.pre1
$(obj)/coreboot.pre1: $(CBFSTOOL)
mv $(obj)/coreboot.rom $@
endif
ifeq ($(CONFIG_PAYLOAD_LINUX),y)
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)
endif
endif
ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y)
REFCODE_BLOB=$(obj)/refcode.rmod
$(REFCODE_BLOB): $(RMODTOOL)
$(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@
endif
$(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $(call strip_quotes,$(COREBOOT_ROM_DEPENDENCIES)) $$(INTERMEDIATE) $$(VBOOT_STUB) $(REFCODE_BLOB)
@printf " CBFS $(subst $(obj)/,,$(@))\n"
cp $(obj)/coreboot.pre $@.tmp
$(CBFSTOOL) $@.tmp add-stage -f $(objcbfs)/ramstage.elf -n $(CONFIG_CBFS_PREFIX)/ramstage -c $(CBFS_COMPRESS_FLAG)
ifeq ($(CONFIG_PAYLOAD_NONE),y)
@printf " PAYLOAD none (as specified by user)\n"
endif
ifneq ($(CONFIG_PAYLOAD_FILE),)
@printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n"
$(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) $(ADDITIONAL_PAYLOAD_CONFIG)
endif
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
@printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
$(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
endif
endif
ifeq ($(CONFIG_SEABIOS_VGA_COREBOOT),y)
@printf " SeaBIOS Adding generated legacy VGA option rom.\n"
$(CBFSTOOL) $@.tmp add -f $(CONFIG_PAYLOAD_VGABIOS_FILE) -n vgaroms/seavgabios.bin -t raw
endif
ifeq ($(CONFIG_INCLUDE_CONFIG_FILE),y)
@printf " CONFIG $(DOTCONFIG)\n"
if [ -f $(DOTCONFIG) ]; then \
echo "# This image was built using git revision" `git rev-parse HEAD` > $(obj)/config.tmp ; \
sed -e '/^#/d' -e '/^ *$$/d' $(DOTCONFIG) >> $(obj)/config.tmp ; \
$(CBFSTOOL) $@.tmp add -f $(obj)/config.tmp -n config -t raw; rm -f $(obj)/config.tmp ; fi
@printf " REVISION build.h\n"
if [ -f $(obj)/build.h ]; then $(CBFSTOOL) $@.tmp add -f $(obj)/build.h -n revision -t raw; fi
endif
ifeq ($(CONFIG_VBOOT_VERIFY_FIRMWARE),y)
$(CBFSTOOL) $@.tmp add-stage -f $(VBOOT_STUB) -n $(CONFIG_CBFS_PREFIX)/vboot -c $(CBFS_COMPRESS_FLAG)
endif
ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y)
$(CBFSTOOL) $@.tmp add-stage -f $(REFCODE_BLOB) -n $(CONFIG_CBFS_PREFIX)/refcode -c $(CBFS_COMPRESS_FLAG)
endif
ifeq ($(CONFIG_PXE_ROM),y)
$(CBFSTOOL) $@.tmp add -f $(CONFIG_PXE_ROM_FILE) -n pci$(CONFIG_PXE_ROM_ID).rom -t raw
endif
ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y)
ifeq ($(CONFIG_CPU_MICROCODE_ADDED_DURING_BUILD),y)
@printf " UPDATE-FIT \n"
$(CBFSTOOL) $@.tmp update-fit -n cpu_microcode_blob.bin -x $(CONFIG_CPU_INTEL_NUM_FIT_ENTRIES)
endif
endif
mv $@.tmp $@
@printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n"
$(CBFSTOOL) $@ print
cbfs-files-$(CONFIG_BOOTSPLASH) += bootsplash.jpg
bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))
bootsplash.jpg-type := bootsplash
$(obj)/coreboot.pre: $(objcbfs)/romstage.elf $(obj)/coreboot.pre1 $(CBFSTOOL)
@printf " CBFS $(subst $(obj)/,,$(@))\n"
cp $(obj)/coreboot.pre1 $@.tmp
$(CBFSTOOL) $@.tmp add-stage \
-f $(objcbfs)/romstage.elf \
-n $(CONFIG_CBFS_PREFIX)/romstage -c none \
$(CBFSTOOL_PRE_OPTS)
mv $@.tmp $@
JENKINS_PAYLOAD=none
what-jenkins-does:
util/abuild/abuild -B -J $(if $(JENKINS_NOCCACHE),,-y) -c 4 -z -p $(JENKINS_PAYLOAD)
(cd payloads/libpayload; $(MAKE) $(if $(JENKINS_NOCCACHE),,CONFIG_CCACHE=y) V=$(V) Q=$(Q) junit.xml)
$(MAKE) V=$(V) Q=$(Q) -C util/cbmem junit.xml