GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/soc/intel/apollolake/cpu.c

296 lines
8.2 KiB
C
Raw Normal View History

soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
/*
* This file is part of the coreboot project.
*
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
* Copyright (C) 2015-2017 Intel Corp.
soc/intel/apollolake: Set CPU to Max Non-Turbo Ratio If the Running Average Power Limits (RAPL) feature is disabled, the CPU should be set to the Max Non-Turbo Ratio. RAPL is switched off by CONFIG_APL_SKIP_SET_POWER_LIMITS. Furthermore, a frequency change should be prevented by disabling Enhanced Intel Speedstep Technology (EIST). So the CPU should run with constant frequency with this setting. Change-Id: I67020f7e75700255629294fd9bcf67ee01765a01 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-24 16:57:26 +02:00
* Copyright (C) 2017 Siemens AG, Inc.
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
* (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
* (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
soc/intel: Update license headers Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-10 19:09:16 +02:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
*/
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
#include <assert.h>
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
#include <console/console.h>
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
#include "chip.h"
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
#include <cpu/cpu.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/mp.h>
soc/intel/apollolake: Gather microcode revision Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24 01:38:05 +02:00
#include <cpu/intel/microcode.h>
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#include <cpu/intel/turbo.h>
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
#include <cpu/x86/msr.h>
#include <cpu/x86/mtrr.h>
#include <device/device.h>
#include <device/pci.h>
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#include <fsp/api.h>
soc/intel/common: Add SMM common code for Intel Platforms SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09 02:32:02 +02:00
#include <fsp/memmap.h>
soc/intel/apollolake: Use CPU common library code This patch makes SOC files to use common/block/cpu/cpulib.c file's helper functions. Change-Id: I529c67cf20253cf819d1c13849300788104b083c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19827 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-23 14:47:14 +02:00
#include <intelblocks/cpulib.h>
soc/intel/apollolake: use fast_spi_cache_bios_region() The fast_spi_cache_bios_region() does the necessary lookup of BIOS region size, etc. Don't inline the calculation and just defer to the common piece of code for memory-mapped spi flash boot. Change-Id: I6c390aa5a57244308016cd59679d8c3ab02031b8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-08 17:54:59 +02:00
#include <intelblocks/fast_spi.h>
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#include <intelblocks/mp_init.h>
soc/intel/apollolake: Use CPU common library code This patch makes SOC files to use common/block/cpu/cpulib.c file's helper functions. Change-Id: I529c67cf20253cf819d1c13849300788104b083c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19827 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-23 14:47:14 +02:00
#include <intelblocks/msr.h>
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
#include <intelblocks/sgx.h>
soc/intel/common: Add SMM common code for Intel Platforms SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09 02:32:02 +02:00
#include <intelblocks/smm.h>
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
#include <reg_script.h>
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#include <romstage_handoff.h>
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
#include <soc/cpu.h>
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
#include <soc/iomap.h>
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
#include <soc/pci_devs.h>
soc/intel/apollolake: Enable ACPI PM timer emulation on all CPUs Currently we enable ACPI PM timer emulation only on BSP. So the timer doesn't work on other cores and that breaks OSes that use it. Also, microcode uses this information to figure out ACPI IO base, and that is used for other features. This patch enables ACPI timer emulation on all the logical CPUs. BUG=chrome-os-partner:60011 TEST=iotools rdmsr x 0x121, x={0..3}, make sure it is set Change-Id: I0d6cb8761c1c25d3a2fcf59a49c1eda9e4ccc70c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17663 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-01 02:39:16 +01:00
#include <soc/pm.h>
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
static const struct reg_script core_msr_script[] = {
/* Enable C-state and IO/MWAIT redirect */
REG_MSR_WRITE(MSR_PMG_CST_CONFIG_CONTROL,
(PKG_C_STATE_LIMIT_C2_MASK | CORE_C_STATE_LIMIT_C10_MASK
| IO_MWAIT_REDIRECT_MASK | CST_CFG_LOCK_MASK)),
/* Power Management I/O base address for I/O trapping to C-states */
REG_MSR_WRITE(MSR_PMG_IO_CAPTURE_BASE,
(ACPI_PMIO_CST_REG | (PMG_IO_BASE_CST_RNG_BLK_SIZE << 16))),
/* Disable C1E */
REG_MSR_RMW(MSR_POWER_CTL, ~0x2, 0),
soc/intel/apollolake: Disable Monitor and Mwait feature Monitor/Mwait is broken on APL. So, it needs to be disabled. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: I12cd4280de62e0a639b43538171660ee4c0a0265 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17200 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-01 01:03:55 +01:00
/* Disable support for MONITOR and MWAIT instructions */
REG_MSR_RMW(MSR_IA32_MISC_ENABLES, ~MONITOR_MWAIT_DIS_MASK, 0),
soc/intel/apollolake: Enable and Lock AES feature register Configure MPinit feature register during boot and s3 resume. Enable and Lock Advanced Encryption Standard (AES-NI) feature. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: Id16f62ec4e7463a466c43d67f2b03e07e324fa93 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17396 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11 23:17:37 +01:00
/*
* Enable and Lock the Advanced Encryption Standard (AES-NI)
* feature register
*/
REG_MSR_RMW(MSR_FEATURE_CONFIG, ~FEATURE_CONFIG_RESERVED_MASK,
FEATURE_CONFIG_LOCK),
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
REG_SCRIPT_END
};
intel/common/mp_init: Refactor MP Init code to get rid of microcode param Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-14 22:57:46 +02:00
void soc_core_init(device_t cpu)
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
{
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
/* Clear out pending MCEs */
/* TODO(adurbin): This should only be done on a cold boot. Also, some
* of these banks are core vs package scope. For now every CPU clears
* every bank. */
mca_configure();
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
/* Set core MSRs */
reg_script_run(core_msr_script);
soc/intel/apollolake: Enable ACPI PM timer emulation on all CPUs Currently we enable ACPI PM timer emulation only on BSP. So the timer doesn't work on other cores and that breaks OSes that use it. Also, microcode uses this information to figure out ACPI IO base, and that is used for other features. This patch enables ACPI timer emulation on all the logical CPUs. BUG=chrome-os-partner:60011 TEST=iotools rdmsr x 0x121, x={0..3}, make sure it is set Change-Id: I0d6cb8761c1c25d3a2fcf59a49c1eda9e4ccc70c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17663 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-01 02:39:16 +01:00
/*
* Enable ACPI PM timer emulation, which also lets microcode know
soc/intel/apollolake: Rename ACPI Base Address and Size Macro Rename these two Macros to help use Common Code - ACPI_PMIO_BASE --> ACPI_BASE_ADDRESS ACPI_PMIO_SIZE --> ACPI_BASE_SIZE Change-Id: I21125b7206c241692cfdf1cdb10b8b3dee62b24a Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20038 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-05 16:31:14 +02:00
* location of ACPI_BASE_ADDRESS. This also enables other features
soc/intel/apollolake: Enable ACPI PM timer emulation on all CPUs Currently we enable ACPI PM timer emulation only on BSP. So the timer doesn't work on other cores and that breaks OSes that use it. Also, microcode uses this information to figure out ACPI IO base, and that is used for other features. This patch enables ACPI timer emulation on all the logical CPUs. BUG=chrome-os-partner:60011 TEST=iotools rdmsr x 0x121, x={0..3}, make sure it is set Change-Id: I0d6cb8761c1c25d3a2fcf59a49c1eda9e4ccc70c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17663 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-01 02:39:16 +01:00
* implemented in microcode.
*/
enable_pm_timer_emulation();
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
/* Configure Core PRMRR for SGX. */
if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_SGX))
prmrr_core_configure();
soc/intel/apollolake: Set CPU to Max Non-Turbo Ratio If the Running Average Power Limits (RAPL) feature is disabled, the CPU should be set to the Max Non-Turbo Ratio. RAPL is switched off by CONFIG_APL_SKIP_SET_POWER_LIMITS. Furthermore, a frequency change should be prevented by disabling Enhanced Intel Speedstep Technology (EIST). So the CPU should run with constant frequency with this setting. Change-Id: I67020f7e75700255629294fd9bcf67ee01765a01 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-24 16:57:26 +02:00
/* Set Max Non-Turbo ratio if RAPL is disabled. */
if (IS_ENABLED(CONFIG_APL_SKIP_SET_POWER_LIMITS)) {
cpu_set_p_state_to_max_non_turbo_ratio();
cpu_disable_eist();
}
soc/apollolake: Add soc core init Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-09 23:08:50 +02:00
}
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#if !IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT)
static void soc_init_core(device_t cpu)
{
intel/common/mp_init: Refactor MP Init code to get rid of microcode param Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-14 22:57:46 +02:00
soc_core_init(cpu);
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
}
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
static struct device_operations cpu_dev_ops = {
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
.init = soc_init_core,
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
};
static struct cpu_device_id cpu_table[] = {
{ X86_VENDOR_INTEL, CPUID_APOLLOLAKE_A0 },
{ X86_VENDOR_INTEL, CPUID_APOLLOLAKE_B0 },
soc/intel/apollolake: Add APL CPU device ID Add Apollo Lake CPU device ID for E0 stepping. Change-Id: I28fa222cd28b783d22c347cdbbd769e66bf10c30 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-24 17:41:19 +02:00
{ X86_VENDOR_INTEL, CPUID_APOLLOLAKE_E0 },
soc/intel/apollolake: Bring in delta for GLK SOC Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-06 01:30:22 +02:00
{ X86_VENDOR_INTEL, CPUID_GLK_A0 },
{ X86_VENDOR_INTEL, CPUID_GLK_B0 },
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
{ 0, 0 },
};
static const struct cpu_driver driver __cpu_driver = {
.ops = &cpu_dev_ops,
.id_table = cpu_table,
};
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#endif
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
/*
* MP and SMM loading initialization.
*/
struct smm_relocation_attrs {
uint32_t smbase;
uint32_t smrr_base;
uint32_t smrr_mask;
};
static struct smm_relocation_attrs relo_attrs;
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
/*
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
* Do essential initialization tasks before APs can be fired up.
*
* IF (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT)) -
* Skip Pre MP init MTRR programming, as MTRRs are mirrored from BSP,
* that are set prior to ramstage.
* Real MTRRs are programmed after resource allocation.
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
*
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
* Do FSP loading before MP Init to ensure that the FSP component stored in
* external stage cache in TSEG does not flush off due to SMM relocation
* during MP Init stage.
*
* ELSE -
* Enable MTRRs on the BSP. This creates the MTRR solution that the
* APs will use. Otherwise APs will try to apply the incomplete solution
* as the BSP is calculating it.
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
*/
soc/intel/apollolake: convert to using common MP init In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03 22:56:24 +02:00
static void pre_mp_init(void)
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
{
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT)) {
fsps_load(romstage_handoff_is_resume());
return;
}
soc/intel/apollolake: revert CPU MP init prior to FSP-S A major regression was introduced with commit 6520e01a (soc/intel/apollolake: Perform CPU MP Init before FSP-S Init) where the APs execution context is taken away by FSP-S. It appears that FSP-S is not honoring the SkipMpInit UPD because it's been shown with some debug code that FSP-S is compeltely hijacking the APs: Chrome EC: Set WAKE mask to 0x00000000 Chrome EC: Set WAKE mask to 0x00000000 CBFS: 'VBOOT' located CBFS at [440000:524140) CBFS: Locating 'vbt.bin' CBFS: Found @ offset 2e700 size 1a00 Running FSPS in 4 secs.. 315875 4315875 cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work cpu2 Waiting for work cpu3 Waiting for work cpu1 Waiting for work Running FSPS.. 4315875 4315875 ITSS IRQ Polarities Before: ITSS IRQ Polarities Before: IPC0: 0xffffeef8 IPC1: 0xffffffff IPC2: 0xffffffff IPC3: 0x00ffffff ITSS IRQ Polarities After: IPC0: 0xffffeef8 IPC1: 0x4a07ffff IPC2: 0x08000000 IPC3: 0x00a11000 This is essentially a revert of 6520e01a to fix the previous behavior. Change-Id: I2e136ea1757870fe69df532ba615b9bfc6dfc651 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2017-06-14 20:21:00 +02:00
x86_setup_mtrrs_with_detect();
x86_mtrr_check();
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
}
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#if !IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT)
static void read_cpu_topology(unsigned int *num_phys, unsigned int *num_virt)
{
msr_t msr;
msr = rdmsr(MSR_CORE_THREAD_COUNT);
*num_virt = (msr.lo >> 0) & 0xffff;
*num_phys = (msr.lo >> 16) & 0xffff;
}
soc/intel/apollolake: convert to using common MP init In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03 22:56:24 +02:00
/* Find CPU topology */
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
int get_cpu_count(void)
soc/intel/apollolake: convert to using common MP init In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03 22:56:24 +02:00
{
unsigned int num_virt_cores, num_phys_cores;
read_cpu_topology(&num_phys_cores, &num_virt_cores);
printk(BIOS_DEBUG, "Detected %u core, %u thread CPU.\n",
num_phys_cores, num_virt_cores);
return num_virt_cores;
}
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
void get_microcode_info(const void **microcode, int *parallel)
soc/intel/apollolake: Gather microcode revision Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24 01:38:05 +02:00
{
*microcode = intel_microcode_find();
*parallel = 1;
soc/intel/apollolake: Remove duplication of find_microcode_patch() code Since get_microcode_info() is aleady searching for the microcode in cbfs, we can just add a intel_microcode_load_unlocked() call here to update the microcode. No need to duplicate finding microcode step during pre_mp_init() function. Change-Id: I525cab0ecc7826554f0a1209862e6357d1c7a9a6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-06-07 10:17:51 +02:00
/* Make sure BSP is using the microcode from cbfs */
intel_microcode_load_unlocked(*microcode);
soc/intel/apollolake: Gather microcode revision Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24 01:38:05 +02:00
}
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
#endif
soc/intel/apollolake: Gather microcode revision Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24 01:38:05 +02:00
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
static void get_smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
size_t *smm_save_state_size)
{
void *smm_base;
size_t smm_size;
soc/intel/apollolake: Implement stage cache to improve resume time This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30 22:57:12 +02:00
void *handler_base;
size_t handler_size;
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
/* All range registers are aligned to 4KiB */
const uint32_t rmask = ~((1 << 12) - 1);
/* Initialize global tracking state. */
soc/intel/apollolake: Use SMM library to get tseg region information This patch uses smm common library function to get tseg base address and size. Hence removing definitions of smm_region() from soc directory. BRANCH=none BUG=b:63974384 TEST=Build and boot reef successfully. Change-Id: I091ca90cf576c0da35cf3fe010f8c22a18ef82d9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30 13:23:20 +02:00
smm_region_info(&smm_base, &smm_size);
soc/intel/apollolake: Implement stage cache to improve resume time This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30 22:57:12 +02:00
smm_subregion(SMM_SUBREGION_HANDLER, &handler_base, &handler_size);
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
relo_attrs.smbase = (uint32_t)smm_base;
relo_attrs.smrr_base = relo_attrs.smbase | MTRR_TYPE_WRBACK;
relo_attrs.smrr_mask = ~(smm_size - 1) & rmask;
relo_attrs.smrr_mask |= MTRR_PHYS_MASK_VALID;
soc/intel/apollolake: Implement stage cache to improve resume time This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30 22:57:12 +02:00
*perm_smbase = (uintptr_t)handler_base;
*perm_smsize = handler_size;
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
*smm_save_state_size = sizeof(em64t100_smm_state_save_area_t);
}
static void relocation_handler(int cpu, uintptr_t curr_smbase,
uintptr_t staggered_smbase)
{
msr_t smrr;
em64t100_smm_state_save_area_t *smm_state;
/* Set up SMRR. */
smrr.lo = relo_attrs.smrr_base;
smrr.hi = 0;
wrmsr(SMRR_PHYS_BASE, smrr);
smrr.lo = relo_attrs.smrr_mask;
smrr.hi = 0;
wrmsr(SMRR_PHYS_MASK, smrr);
smm_state = (void *)(SMM_EM64T100_SAVE_STATE_OFFSET + curr_smbase);
smm_state->smbase = staggered_smbase;
}
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
/*
* CPU initialization recipe
*
* Note that no microcode update is passed to the init function. CSE updates
* the microcode on all cores before releasing them from reset. That means that
* the BSP and all APs will come up with the same microcode revision.
*/
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
static void post_mp_init(void)
{
smm_southbridge_enable();
if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_SGX))
mp_run_on_all_cpus(sgx_configure, 2000);
}
soc/intel/apollolake: convert to using common MP init In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03 22:56:24 +02:00
static const struct mp_ops mp_ops = {
.pre_mp_init = pre_mp_init,
.get_cpu_count = get_cpu_count,
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
.get_smm_info = get_smm_info,
soc/intel/apollolake: Gather microcode revision Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24 01:38:05 +02:00
.get_microcode_info = get_microcode_info,
soc/intel/common: Add SMM common code for Intel Platforms SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09 02:32:02 +02:00
.pre_mp_smm_init = smm_southbridge_clear_state,
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
.relocation_handler = relocation_handler,
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
.post_mp_init = post_mp_init,
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
};
intel/common/mp_init: Refactor MP Init code to get rid of microcode param Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-14 22:57:46 +02:00
void soc_init_cpus(struct bus *cpu_bus)
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
{
/* Clear for take-off */
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
if (mp_init_with_smm(cpu_bus, &mp_ops))
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
printk(BIOS_ERR, "MP initialization failure.\n");
soc/intel/apollolake: Provide option to use Common MP Init This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07 14:56:31 +02:00
}
void apollolake_init_cpus(struct device *dev)
{
if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT))
return;
intel/common/mp_init: Refactor MP Init code to get rid of microcode param Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-14 22:57:46 +02:00
soc_init_cpus(dev->link_list);
soc/intel/apollolake: cache the MMIO BIOS region If the boot media is memory mapped temporarily mark it as write protect MTRR type so that memory-mapped accesses are faster. Depthcharge payload loading was sped up by 75ms using this. BUG=chrome-os-partner:56656,chrome-os-partner:59682 Change-Id: Iba87a51a05559d81b8e00fa4f6824dacf7a661f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17372 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11 03:04:19 +01:00
/* Temporarily cache the memory-mapped boot media. */
soc/intel/apollolake: use fast_spi_cache_bios_region() The fast_spi_cache_bios_region() does the necessary lookup of BIOS region size, etc. Don't inline the calculation and just defer to the common piece of code for memory-mapped spi flash boot. Change-Id: I6c390aa5a57244308016cd59679d8c3ab02031b8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-08 17:54:59 +02:00
if (IS_ENABLED(CONFIG_BOOT_DEVICE_MEMORY_MAPPED) &&
IS_ENABLED(CONFIG_BOOT_DEVICE_SPI_FLASH))
fast_spi_cache_bios_region();
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
}
soc/intel/apollolake: Add SGX support - Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-29 23:27:07 +02:00
void cpu_lock_sgx_memory(void)
{
/* Do nothing because MCHECK while loading microcode and enabling
* IA untrusted mode takes care of necessary locking */
}
int soc_fill_sgx_param(struct sgx_param *sgx_param)
{
device_t dev = SA_DEV_ROOT;
assert(dev != NULL);
config_t *conf = dev->chip_info;
if (!conf) {
printk(BIOS_ERR, "Failed to get chip_info for SGX param\n");
return -1;
}
sgx_param->enable = conf->sgx_enable;
return 0;
}
Reference in a new issue Copy permalink