coreboot-kgpe-d16/src/mainboard/emulation/qemu-x86/northbridge.c

104 lines
2.7 KiB
C
Raw Normal View History

#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <device/device.h>
#include <device/pci.h>
#include <stdlib.h>
#include <string.h>
#include <bitops.h>
#include "chip.h"
#include <delay.h>
#if CONFIG_WRITE_HIGH_TABLES==1
#define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB
extern uint64_t high_tables_base, high_tables_size;
#endif
#define CMOS_ADDR_PORT 0x70
#define CMOS_DATA_PORT 0x71
#define HIGH_RAM_ADDR 0x35
#define LOW_RAM_ADDR 0x34
static void cpu_pci_domain_set_resources(device_t dev)
{
u32 pci_tolm = find_pci_tolm(dev->link_list);
unsigned long tomk = 0, tolmk;
int idx;
outb (HIGH_RAM_ADDR, CMOS_ADDR_PORT);
tomk = ((unsigned long) inb(CMOS_DATA_PORT)) << 14;
outb (LOW_RAM_ADDR, CMOS_ADDR_PORT);
tomk |= ((unsigned long) inb(CMOS_DATA_PORT)) << 6;
tomk += 16 * 1024;
printk(BIOS_DEBUG, "Detected %lu Kbytes (%lu MiB) RAM.\n",
tomk, tomk / 1024);
/* Compute the top of Low memory */
tolmk = pci_tolm >> 10;
if (tolmk >= tomk) {
/* The PCI hole does not overlap the memory. */
tolmk = tomk;
}
/* Report the memory regions. */
idx = 10;
ram_resource(dev, idx++, 0, 640);
ram_resource(dev, idx++, 768, tolmk - 768);
#if CONFIG_WRITE_HIGH_TABLES==1
/* Leave some space for ACPI, PIRQ and MP tables */
high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
high_tables_size = HIGH_TABLES_SIZE * 1024;
#endif
assign_resources(dev->link_list);
}
static void cpu_pci_domain_read_resources(struct device *dev)
{
struct resource *res;
pci_domain_read_resources(dev);
/* Reserve space for the IOAPIC. This should be in the Southbridge,
* but I couldn't tell which device to put it in. */
res = new_resource(dev, 2);
res->base = 0xfec00000UL;
res->size = 0x100000UL;
res->limit = 0xffffffffUL;
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED |
IORESOURCE_ASSIGNED;
/* Reserve space for the LAPIC. There's one in every processor, but
* the space only needs to be reserved once, so we do it here. */
res = new_resource(dev, 3);
res->base = 0xfee00000UL;
res->size = 0x10000UL;
res->limit = 0xffffffffUL;
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED |
IORESOURCE_ASSIGNED;
}
static struct device_operations pci_domain_ops = {
.read_resources = cpu_pci_domain_read_resources,
.set_resources = cpu_pci_domain_set_resources,
.enable_resources = NULL,
.init = NULL,
.scan_bus = pci_domain_scan_bus,
};
static void enable_dev(struct device *dev)
{
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
dev->ops = &pci_domain_ops;
pci_set_method(dev);
}
}
struct chip_operations mainboard_emulation_qemu_x86_ops = {
CHIP_NAME("QEMU Northbridge")
.enable_dev = enable_dev,
};