coreboot-kgpe-d16/src/soc/rockchip/rk3288/Makefile.inc

82 lines
2.2 KiB
PHP
Raw Normal View History

##
## This file is part of the coreboot project.
##
## Copyright 2014 Rockchip Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
IDBTOOL = util/rockchip/make_idb.py
#bootblock-y += bootblock.c
bootblock-y += cbmem.c
ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y)
bootblock-$(CONFIG_DRIVERS_UART) += uart.c
endif
bootblock-y += timer.c
bootblock-y += clock.c
bootblock-y += spi.c
bootblock-y += gpio.c
bootblock-y += i2c.c
rk3288: Add software I2C support This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-10 02:40:58 +01:00
bootblock-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
bootblock-y += rk808.c
verstage-y += spi.c
verstage-y += timer.c
verstage-$(CONFIG_DRIVERS_UART) += uart.c
verstage-y += gpio.c
verstage-y += clock.c
verstage-y += crypto.c
verstage-y += i2c.c
rk3288: Add software I2C support This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-10 02:40:58 +01:00
verstage-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
romstage-y += cbmem.c
romstage-y += timer.c
romstage-$(CONFIG_DRIVERS_UART) += uart.c
romstage-y += i2c.c
rk3288: Add software I2C support This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-10 02:40:58 +01:00
romstage-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
romstage-y += clock.c
romstage-y += gpio.c
romstage-y += spi.c
romstage-y += sdram.c
2014-12-06 02:29:42 +01:00
romstage-y += rk808.c
romstage-y += pwm.c
romstage-y += tsadc.c
ramstage-y += soc.c
ramstage-y += cbmem.c
ramstage-y += timer.c
ramstage-y += i2c.c
rk3288: Add software I2C support This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-10 02:40:58 +01:00
ramstage-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
ramstage-y += clock.c
ramstage-y += spi.c
ramstage-y += sdram.c
ramstage-y += gpio.c
ramstage-y += rk808.c
ramstage-y += pwm.c
ramstage-y += vop.c
ramstage-y += edp.c
ramstage-y += display.c
ramstage-$(CONFIG_DRIVERS_UART) += uart.c
rk3288: Change all SoC headers to <soc/headername.h> system This patch is the start of a series to change all non-x86 SoC-specific headers to be included as <soc/header.h> instead of the old <soc/vendor/chip/header.h> or "header.h". It will add an include/soc/ directory under every src/soc/vendor/chip/ and append the .../include/ part of that to the global include path. This matches the usage of <arch/header.h> for architecture-specific headers and had already been done for some headers on Tegra. It has the advantage that a source file which does not know the specific SoC used (e.g. Tegra files common for multiple chips, or a global include file) can still include SoC-specific headers and access macros/types defined there. It also makes the includes for mainboard files more readable, and reduces the chance to pull in a wrong header when copying mainboard sources to use a different-related SoC (e.g. using a Tegra124 mainboard as template for a Tegra132 one). For easier maintainability, every SoC family is modified individually. This patch starts out by changing Rk3288. Also alphabetized headers in affected files since we touch them anyway. BUG=None TEST=Whole series: compared binary images for Daisy, Nyan_Blaze, Rush_Ryu, Storm, Urara and Veyron_Pinky. Confirmed that they are byte-for-byte identical except for timestamps, hashes, and __LINE__ macro replacements. Compile-tested individual patches. Change-Id: I4d74a0c56be278e591a9cf43f93e9900e41f4319 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ad8b6d2e0280428aa9742f0f7b723c00857334a Original-Change-Id: I415b8dbe735e572d4ae2cb1df62d66bcce386fff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/222025 Reviewed-on: http://review.coreboot.org/9349 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-20 22:14:55 +02:00
CPPFLAGS_common += -Isrc/soc/rockchip/rk3288/include/
$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf
cp $< $@
$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin
@printf "Generating: $(subst $(obj)/,,$(@))\n"
@mkdir -p $(dir $@)
@$(IDBTOOL) --from=$< --to=$@ --enable-align