coreboot-kgpe-d16/payloads/libpayload/drivers/usb/xhci.c

919 lines
26 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2010 Patrick Georgi
* Copyright (C) 2013 secunet Security Networks AG
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
//#define XHCI_SPEW_DEBUG
#include <inttypes.h>
#include <arch/virtual.h>
#include "xhci_private.h"
#include "xhci.h"
static void xhci_start (hci_t *controller);
static void xhci_stop (hci_t *controller);
static void xhci_reset (hci_t *controller);
static void xhci_reinit (hci_t *controller);
static void xhci_shutdown (hci_t *controller);
static int xhci_bulk (endpoint_t *ep, int size, u8 *data, int finalize);
static int xhci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq,
int dalen, u8 *data);
static void* xhci_create_intr_queue (endpoint_t *ep, int reqsize, int reqcount, int reqtiming);
static void xhci_destroy_intr_queue (endpoint_t *ep, void *queue);
static u8* xhci_poll_intr_queue (void *queue);
/*
* Some structures must not cross page boundaries. To get this,
* we align them by their size (or the next greater power of 2).
*/
void *
xhci_align(const size_t min_align, const size_t size)
{
size_t align;
if (!(size & (size - 1)))
align = size; /* It's a power of 2 */
else
align = 1 << ((sizeof(unsigned) << 3) - __builtin_clz(size));
if (align < min_align)
align = min_align;
xhci_spew("Aligning %zu to %zu\n", size, align);
2013-09-04 02:15:31 +02:00
return dma_memalign(align, size);
}
void
xhci_clear_trb(trb_t *const trb, const int pcs)
{
trb->ptr_low = 0;
trb->ptr_high = 0;
trb->status = 0;
trb->control = !pcs;
}
void
xhci_init_cycle_ring(transfer_ring_t *const tr, const size_t ring_size)
{
memset((void *)tr->ring, 0, ring_size * sizeof(*tr->ring));
TRB_SET(TT, &tr->ring[ring_size - 1], TRB_LINK);
TRB_SET(TC, &tr->ring[ring_size - 1], 1);
/* only one segment that points to itself */
tr->ring[ring_size - 1].ptr_low = virt_to_phys(tr->ring);
tr->pcs = 1;
tr->cur = tr->ring;
}
/* On Panther Point: switch ports shared with EHCI to xHCI */
static void
xhci_switch_ppt_ports(pcidev_t addr)
{
if (pci_read_config32(addr, 0x00) == 0x1e318086) {
u32 reg32 = pci_read_config32(addr, 0xdc) & 0xf;
xhci_debug("Ports capable of SuperSpeed: 0x%"PRIx32"\n", reg32);
/* For now, do not enable SuperSpeed on any ports */
//pci_write_config32(addr, 0xd8, reg32);
pci_write_config32(addr, 0xd8, 0x00000000);
reg32 = pci_read_config32(addr, 0xd8) & 0xf;
xhci_debug("Configured for SuperSpeed: 0x%"PRIx32"\n", reg32);
reg32 = pci_read_config32(addr, 0xd4) & 0xf;
xhci_debug("Trying to switch over: 0x%"PRIx32"\n", reg32);
pci_write_config32(addr, 0xd0, reg32);
reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Actually switched over: 0x%"PRIx32"\n", reg32);
}
}
/* On Panther Point: switch all ports back to EHCI */
static void
xhci_switchback_ppt_ports(pcidev_t addr)
{
if (pci_read_config32(addr, 0x00) == 0x1e318086) {
u32 reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Switching ports back: 0x%"PRIx32"\n", reg32);
pci_write_config32(addr, 0xd0, 0x00000000);
reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Still switched to xHCI: 0x%"PRIx32"\n", reg32);
}
}
static long
xhci_handshake(volatile u32 *const reg, u32 mask, u32 wait_for, long timeout_us)
{
while ((*reg & mask) != wait_for && timeout_us--) udelay(1);
return timeout_us;
}
static int
xhci_wait_ready(xhci_t *const xhci)
{
xhci_debug("Waiting for controller to be ready... ");
if (!xhci_handshake(&xhci->opreg->usbsts, USBSTS_CNR, 0, 100000L)) {
usb_debug("timeout!\n");
return -1;
}
usb_debug("ok.\n");
return 0;
}
hci_t *
xhci_init (unsigned long physical_bar)
{
int i;
/* First, allocate and initialize static controller structures */
hci_t *const controller = new_controller();
controller->type = XHCI;
controller->start = xhci_start;
controller->stop = xhci_stop;
controller->reset = xhci_reset;
controller->init = xhci_reinit;
controller->shutdown = xhci_shutdown;
controller->bulk = xhci_bulk;
controller->control = xhci_control;
controller->set_address = xhci_set_address;
controller->finish_device_config= xhci_finish_device_config;
controller->destroy_device = xhci_destroy_dev;
controller->create_intr_queue = xhci_create_intr_queue;
controller->destroy_intr_queue = xhci_destroy_intr_queue;
controller->poll_intr_queue = xhci_poll_intr_queue;
controller->pcidev = 0;
controller->reg_base = (u32)physical_bar;
controller->instance = xzalloc(sizeof(xhci_t));
xhci_t *const xhci = (xhci_t *)controller->instance;
init_device_entry(controller, 0);
xhci->roothub = controller->devices[0];
xhci->cr.ring = xhci_align(64, COMMAND_RING_SIZE * sizeof(trb_t));
xhci->er.ring = xhci_align(64, EVENT_RING_SIZE * sizeof(trb_t));
xhci->ev_ring_table = xhci_align(64, sizeof(erst_entry_t));
if (!xhci->roothub || !xhci->cr.ring ||
!xhci->er.ring || !xhci->ev_ring_table) {
xhci_debug("Out of memory\n");
goto _free_xhci;
}
xhci->capreg = phys_to_virt(physical_bar);
xhci->opreg = ((void *)xhci->capreg) + xhci->capreg->caplength;
xhci->hcrreg = ((void *)xhci->capreg) + xhci->capreg->rtsoff;
xhci->dbreg = ((void *)xhci->capreg) + xhci->capreg->dboff;
xhci_debug("regbase: 0x%"PRIx32"\n", physical_bar);
xhci_debug("caplen: 0x%"PRIx32"\n", xhci->capreg->caplength);
xhci_debug("rtsoff: 0x%"PRIx32"\n", xhci->capreg->rtsoff);
xhci_debug("dboff: 0x%"PRIx32"\n", xhci->capreg->dboff);
xhci_debug("hciversion: %"PRIx8".%"PRIx8"\n",
xhci->capreg->hciver_hi, xhci->capreg->hciver_lo);
if ((xhci->capreg->hciversion < 0x96) ||
(xhci->capreg->hciversion > 0x100)) {
xhci_debug("Unsupported xHCI version\n");
goto _free_xhci;
}
2013-09-04 02:15:31 +02:00
xhci_debug("context size: %dB\n", CTXSIZE(xhci));
xhci_debug("maxslots: 0x%02lx\n", xhci->capreg->MaxSlots);
xhci_debug("maxports: 0x%02lx\n", xhci->capreg->MaxPorts);
const unsigned pagesize = xhci->opreg->pagesize << 12;
xhci_debug("pagesize: 0x%04x\n", pagesize);
/*
* We haven't touched the hardware yet. So we allocate all dynamic
* structures at first and can still chicken out easily if we run out
* of memory.
*/
2013-09-04 02:15:31 +02:00
xhci->max_slots_en = xhci->capreg->MaxSlots & CONFIG_LP_MASK_MaxSlotsEn;
xhci->dcbaa = xhci_align(64, (xhci->max_slots_en + 1) * sizeof(u64));
xhci->dev = malloc((xhci->max_slots_en + 1) * sizeof(*xhci->dev));
if (!xhci->dcbaa || !xhci->dev) {
xhci_debug("Out of memory\n");
goto _free_xhci;
}
2013-09-04 02:15:31 +02:00
memset(xhci->dcbaa, 0x00, (xhci->max_slots_en + 1) * sizeof(u64));
memset(xhci->dev, 0x00, (xhci->max_slots_en + 1) * sizeof(*xhci->dev));
/*
* Let dcbaa[0] point to another array of pointers, sp_ptrs.
* The pointers therein point to scratchpad buffers (pages).
*/
const size_t max_sp_bufs = xhci->capreg->Max_Scratchpad_Bufs;
xhci_debug("max scratchpad bufs: 0x%zx\n", max_sp_bufs);
if (max_sp_bufs) {
const size_t sp_ptrs_size = max_sp_bufs * sizeof(u64);
xhci->sp_ptrs = xhci_align(64, sp_ptrs_size);
if (!xhci->sp_ptrs) {
xhci_debug("Out of memory\n");
goto _free_xhci_structs;
}
memset(xhci->sp_ptrs, 0x00, sp_ptrs_size);
for (i = 0; i < max_sp_bufs; ++i) {
/* Could use mmap() here if we had it.
Maybe there is another way. */
void *const page = memalign(pagesize, pagesize);
if (!page) {
xhci_debug("Out of memory\n");
goto _free_xhci_structs;
}
xhci->sp_ptrs[i] = virt_to_phys(page);
}
xhci->dcbaa[0] = virt_to_phys(xhci->sp_ptrs);
}
2013-09-04 02:15:31 +02:00
if (dma_initialized()) {
xhci->dma_buffer = dma_memalign(64 * 1024, DMA_SIZE);
if (!xhci->dma_buffer) {
xhci_debug("Not enough memory for DMA bounce buffer\n");
goto _free_xhci_structs;
}
}
/* Now start working on the hardware */
if (xhci_wait_ready(xhci))
2013-09-04 02:15:31 +02:00
goto _free_xhci_structs;
/* TODO: Check if BIOS claims ownership (and hand over) */
xhci_reset(controller);
xhci_reinit(controller);
xhci->roothub->controller = controller;
xhci->roothub->init = xhci_rh_init;
xhci->roothub->init(xhci->roothub);
return controller;
_free_xhci_structs:
free(xhci->dma_buffer);
if (xhci->sp_ptrs) {
for (i = 0; i < max_sp_bufs; ++i) {
if (xhci->sp_ptrs[i])
free(phys_to_virt(xhci->sp_ptrs[i]));
}
}
free(xhci->sp_ptrs);
free(xhci->dcbaa);
_free_xhci:
free((void *)xhci->ev_ring_table);
free((void *)xhci->er.ring);
free((void *)xhci->cr.ring);
free(xhci->roothub);
2013-09-04 02:15:31 +02:00
free(xhci->dev);
free(xhci);
_free_controller:
detach_controller(controller);
free(controller);
return NULL;
}
#ifdef CONFIG_LP_USB_PCI
hci_t *
xhci_pci_init (pcidev_t addr)
{
u32 reg_addr;
hci_t *controller;
reg_addr = pci_read_config32 (addr, 0x10) & ~0xf;
if (pci_read_config32 (addr, 0x14) > 0) {
fatal("We don't do 64bit addressing.\n");
}
controller = xhci_init((unsigned long)reg_addr);
if (controller) {
controller->pcidev = addr;
xhci_switch_ppt_ports(addr);
}
return controller;
}
#endif
static void
xhci_reset(hci_t *const controller)
{
xhci_t *const xhci = XHCI_INST(controller);
xhci_stop(controller);
xhci->opreg->usbcmd |= USBCMD_HCRST;
xhci_debug("Resetting controller... ");
if (!xhci_handshake(&xhci->opreg->usbcmd, USBCMD_HCRST, 0, 1000000L))
usb_debug("timeout!\n");
else
usb_debug("ok.\n");
}
static void
xhci_reinit (hci_t *controller)
{
xhci_t *const xhci = XHCI_INST(controller);
if (xhci_wait_ready(xhci))
return;
/* Enable all available slots */
2013-09-04 02:15:31 +02:00
xhci->opreg->config = xhci->max_slots_en;
/* Set DCBAA */
xhci->opreg->dcbaap_lo = virt_to_phys(xhci->dcbaa);
xhci->opreg->dcbaap_hi = 0;
/* Initialize command ring */
xhci_init_cycle_ring(&xhci->cr, COMMAND_RING_SIZE);
xhci_debug("command ring @%p (0x%08x)\n",
xhci->cr.ring, virt_to_phys(xhci->cr.ring));
xhci->opreg->crcr_lo = virt_to_phys(xhci->cr.ring) | CRCR_RCS;
xhci->opreg->crcr_hi = 0;
/* Make sure interrupts are disabled */
xhci->opreg->usbcmd &= ~USBCMD_INTE;
/* Initialize event ring */
xhci_reset_event_ring(&xhci->er);
xhci_debug("event ring @%p (0x%08x)\n",
xhci->er.ring, virt_to_phys(xhci->er.ring));
xhci_debug("ERST Max: 0x%lx -> 0x%lx entries\n",
xhci->capreg->ERST_Max, 1 << xhci->capreg->ERST_Max);
memset((void*)xhci->ev_ring_table, 0x00, sizeof(erst_entry_t));
xhci->ev_ring_table[0].seg_base_lo = virt_to_phys(xhci->er.ring);
xhci->ev_ring_table[0].seg_base_hi = 0;
xhci->ev_ring_table[0].seg_size = EVENT_RING_SIZE;
/* Initialize primary interrupter */
xhci->hcrreg->intrrs[0].erstsz = 1;
xhci_update_event_dq(xhci);
/* erstba has to be written at last */
xhci->hcrreg->intrrs[0].erstba_lo = virt_to_phys(xhci->ev_ring_table);
xhci->hcrreg->intrrs[0].erstba_hi = 0;
xhci_start(controller);
#ifdef USB_DEBUG
int i;
for (i = 0; i < 32; ++i) {
xhci_debug("NOOP run #%d\n", i);
trb_t *const cmd = xhci_next_command_trb(xhci);
TRB_SET(TT, cmd, TRB_CMD_NOOP);
xhci_post_command(xhci);
/* Wait for result in event ring */
xhci_wait_for_command_done(xhci, cmd, 1);
xhci_debug("Command ring is %srunning\n",
(xhci->opreg->crcr_lo & CRCR_CRR) ? "" : "not ");
}
#endif
}
static void
xhci_shutdown(hci_t *const controller)
{
int i;
if (controller == 0)
return;
detach_controller(controller);
xhci_t *const xhci = XHCI_INST(controller);
xhci_stop(controller);
if (controller->pcidev)
xhci_switchback_ppt_ports(controller->pcidev);
if (xhci->sp_ptrs) {
const size_t max_sp_bufs = xhci->capreg->Max_Scratchpad_Bufs;
for (i = 0; i < max_sp_bufs; ++i) {
if (xhci->sp_ptrs[i])
free(phys_to_virt(xhci->sp_ptrs[i]));
}
}
free(xhci->sp_ptrs);
free(xhci->dma_buffer);
free(xhci->dcbaa);
2013-09-04 02:15:31 +02:00
free(xhci->dev);
free((void *)xhci->ev_ring_table);
free((void *)xhci->er.ring);
free((void *)xhci->cr.ring);
free(xhci);
free(controller);
}
static void
xhci_start (hci_t *controller)
{
xhci_t *const xhci = XHCI_INST(controller);
xhci->opreg->usbcmd |= USBCMD_RS;
if (!xhci_handshake(&xhci->opreg->usbsts, USBSTS_HCH, 0, 1000000L))
xhci_debug("Controller didn't start within 1s\n");
}
static void
xhci_stop (hci_t *controller)
{
xhci_t *const xhci = XHCI_INST(controller);
xhci->opreg->usbcmd &= ~USBCMD_RS;
if (!xhci_handshake(&xhci->opreg->usbsts,
USBSTS_HCH, USBSTS_HCH, 1000000L))
xhci_debug("Controller didn't halt within 1s\n");
}
static int
xhci_reset_endpoint(usbdev_t *const dev, endpoint_t *const ep)
{
xhci_t *const xhci = XHCI_INST(dev->controller);
const int slot_id = dev->address;
const int ep_id = ep ? xhci_ep_id(ep) : 1;
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[slot_id].ctx.ep[ep_id];
xhci_debug("Resetting ID %d EP %d (ep state: %d)\n",
2013-09-04 02:15:31 +02:00
slot_id, ep_id, EC_GET(STATE, epctx));
/* Run Reset Endpoint Command if the EP is in Halted state */
2013-09-04 02:15:31 +02:00
if (EC_GET(STATE, epctx) == 2) {
const int cc = xhci_cmd_reset_endpoint(xhci, slot_id, ep_id);
if (cc != CC_SUCCESS) {
xhci_debug("Reset Endpoint Command failed: %d\n", cc);
return 1;
}
}
/* Clear TT buffer for bulk and control endpoints behind a TT */
const int hub = dev->hub;
if (hub && dev->speed < HIGH_SPEED &&
dev->controller->devices[hub]->speed == HIGH_SPEED)
/* TODO */;
/* Reset transfer ring if the endpoint is in the right state */
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
if (ep_state == 3 || ep_state == 4) {
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr =
xhci->dev[slot_id].transfer_rings[ep_id];
const int cc = xhci_cmd_set_tr_dq(xhci, slot_id, ep_id,
tr->ring, 1);
if (cc != CC_SUCCESS) {
xhci_debug("Set TR Dequeue Command failed: %d\n", cc);
return 1;
}
xhci_init_cycle_ring(tr, TRANSFER_RING_SIZE);
}
xhci_debug("Finished resetting ID %d EP %d (ep state: %d)\n",
2013-09-04 02:15:31 +02:00
slot_id, ep_id, EC_GET(STATE, epctx));
return 0;
}
static void
xhci_enqueue_trb(transfer_ring_t *const tr)
{
const int chain = TRB_GET(CH, tr->cur);
TRB_SET(C, tr->cur, tr->pcs);
++tr->cur;
while (TRB_GET(TT, tr->cur) == TRB_LINK) {
xhci_spew("Handling LINK pointer\n");
const int tc = TRB_GET(TC, tr->cur);
TRB_SET(CH, tr->cur, chain);
TRB_SET(C, tr->cur, tr->pcs);
tr->cur = phys_to_virt(tr->cur->ptr_low);
if (tc)
tr->pcs ^= 1;
}
}
static void
xhci_enqueue_td(transfer_ring_t *const tr, const int ep, const size_t mps,
const int dalen, void *const data, const int dir)
{
trb_t *trb = NULL; /* cur TRB */
u8 *cur_start = data; /* cur data pointer */
size_t length = dalen; /* remaining bytes */
size_t packets = (length + mps - 1) / mps; /* remaining packets */
size_t residue = 0; /* residue from last TRB */
size_t trb_count = 0; /* TRBs added so far */
while (length || !trb_count /* enqueue at least one */) {
const size_t cur_end = ((size_t)cur_start + 0x10000) & ~0xffff;
size_t cur_length = cur_end - (size_t)cur_start;
if (length < cur_length) {
cur_length = length;
packets = 0;
length = 0;
} else {
packets -= (residue + cur_length) / mps;
residue = (residue + cur_length) % mps;
length -= cur_length;
}
trb = tr->cur;
xhci_clear_trb(trb, tr->pcs);
trb->ptr_low = virt_to_phys(cur_start);
TRB_SET(TL, trb, cur_length);
TRB_SET(TDS, trb, packets);
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
TRB_SET(CH, trb, 1);
/* Check for first, data stage TRB */
if (!trb_count && ep == 1) {
TRB_SET(DIR, trb, dir);
TRB_SET(TT, trb, TRB_DATA_STAGE);
} else {
TRB_SET(TT, trb, TRB_NORMAL);
}
xhci_enqueue_trb(tr);
cur_start += cur_length;
++trb_count;
}
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
trb = tr->cur;
xhci_clear_trb(trb, tr->pcs);
trb->ptr_low = virt_to_phys(trb); /* for easier debugging only */
TRB_SET(TT, trb, TRB_EVENT_DATA);
TRB_SET(IOC, trb, 1);
xhci_enqueue_trb(tr);
}
static int
xhci_control(usbdev_t *const dev, const direction_t dir,
const int drlen, void *const devreq,
2013-09-04 02:15:31 +02:00
const int dalen, unsigned char *const src)
{
2013-09-04 02:15:31 +02:00
unsigned char *data = src;
xhci_t *const xhci = XHCI_INST(dev->controller);
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[dev->address].ctx.ep0;
transfer_ring_t *const tr = xhci->dev[dev->address].transfer_rings[1];
const size_t off = (size_t)data & 0xffff;
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
if ((off + dalen) > ((TRANSFER_RING_SIZE - 4) << 16)) {
xhci_debug("Unsupported transfer size\n");
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
}
/* Reset endpoint if it's not running */
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
if (ep_state > 1) {
if (xhci_reset_endpoint(dev, NULL))
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
}
2013-09-04 02:15:31 +02:00
if (dalen && !dma_coherent(src)) {
data = xhci->dma_buffer;
if (dalen > DMA_SIZE) {
xhci_debug("Control transfer too large: %d\n", dalen);
return -1;
}
if (dir == OUT)
memcpy(data, src, dalen);
}
/* Fill and enqueue setup TRB */
trb_t *const setup = tr->cur;
xhci_clear_trb(setup, tr->pcs);
setup->ptr_low = ((u32 *)devreq)[0];
setup->ptr_high = ((u32 *)devreq)[1];
TRB_SET(TL, setup, 8);
TRB_SET(TRT, setup, (dalen)
? ((dir == OUT) ? TRB_TRT_OUT_DATA : TRB_TRT_IN_DATA)
: TRB_TRT_NO_DATA);
TRB_SET(TT, setup, TRB_SETUP_STAGE);
TRB_SET(IDT, setup, 1);
TRB_SET(IOC, setup, 1);
xhci_enqueue_trb(tr);
/* Fill and enqueue data TRBs (if any) */
if (dalen) {
2013-09-04 02:15:31 +02:00
const unsigned mps = EC_GET(MPS, epctx);
const unsigned dt_dir = (dir == OUT) ? TRB_DIR_OUT : TRB_DIR_IN;
xhci_enqueue_td(tr, 1, mps, dalen, data, dt_dir);
}
/* Fill status TRB */
trb_t *const status = tr->cur;
xhci_clear_trb(status, tr->pcs);
TRB_SET(DIR, status, (dir == OUT) ? TRB_DIR_IN : TRB_DIR_OUT);
TRB_SET(TT, status, TRB_STATUS_STAGE);
TRB_SET(IOC, status, 1);
xhci_enqueue_trb(tr);
/* Ring doorbell for EP0 */
xhci->dbreg[dev->address] = 1;
/* Wait for transfer events */
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
int i, transferred = 0;
const int n_stages = 2 + !!dalen;
for (i = 0; i < n_stages; ++i) {
const int ret = xhci_wait_for_transfer(xhci, dev->address, 1);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
transferred += ret;
if (ret < 0) {
if (ret == TIMEOUT) {
xhci_debug("Stopping ID %d EP 1\n",
dev->address);
xhci_cmd_stop_endpoint(xhci, dev->address, 1);
}
xhci_debug("Stage %d/%d failed: %d\n"
" trb ring: @%p\n"
" setup trb: @%p\n"
" status trb: @%p\n"
" ep state: %d -> %d\n"
" usbsts: 0x%08"PRIx32"\n",
i, n_stages, ret,
tr->ring, setup, status,
2013-09-04 02:15:31 +02:00
ep_state, EC_GET(STATE, epctx),
xhci->opreg->usbsts);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
}
}
2013-09-04 02:15:31 +02:00
if (dir == IN && data != src)
memcpy(src, data, transferred);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return transferred;
}
/* finalize == 1: if data is of packet aligned size, add a zero length packet */
static int
2013-09-04 02:15:31 +02:00
xhci_bulk(endpoint_t *const ep, const int size, u8 *const src,
const int finalize)
{
/* finalize: Hopefully the xHCI controller always does this.
We have no control over the packets. */
2013-09-04 02:15:31 +02:00
u8 *data = src;
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
const int ep_id = xhci_ep_id(ep);
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[slot_id].ctx.ep[ep_id];
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
const size_t off = (size_t)data & 0xffff;
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
if ((off + size) > ((TRANSFER_RING_SIZE - 2) << 16)) {
xhci_debug("Unsupported transfer size\n");
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
}
2013-09-04 02:15:31 +02:00
if (!dma_coherent(src)) {
data = xhci->dma_buffer;
if (size > DMA_SIZE) {
xhci_debug("Bulk transfer too large: %d\n", size);
return -1;
}
if (ep->direction == OUT)
memcpy(data, src, size);
}
/* Reset endpoint if it's not running */
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
if (ep_state > 1) {
if (xhci_reset_endpoint(ep->dev, ep))
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
}
/* Enqueue transfer and ring doorbell */
2013-09-04 02:15:31 +02:00
const unsigned mps = EC_GET(MPS, epctx);
const unsigned dir = (ep->direction == OUT) ? TRB_DIR_OUT : TRB_DIR_IN;
xhci_enqueue_td(tr, ep_id, mps, size, data, dir);
xhci->dbreg[ep->dev->address] = ep_id;
/* Wait for transfer event */
const int ret = xhci_wait_for_transfer(xhci, ep->dev->address, ep_id);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
if (ret < 0) {
if (ret == TIMEOUT) {
xhci_debug("Stopping ID %d EP %d\n",
ep->dev->address, ep_id);
xhci_cmd_stop_endpoint(xhci, ep->dev->address, ep_id);
}
xhci_debug("Bulk transfer failed: %d\n"
" ep state: %d -> %d\n"
" usbsts: 0x%08"PRIx32"\n",
ret, ep_state,
2013-09-04 02:15:31 +02:00
EC_GET(STATE, epctx),
xhci->opreg->usbsts);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
}
2013-09-04 02:15:31 +02:00
if (ep->direction == IN && data != src)
memcpy(src, data, ret);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
}
static trb_t *
xhci_next_trb(trb_t *cur, int *const pcs)
{
++cur;
while (TRB_GET(TT, cur) == TRB_LINK) {
if (pcs && TRB_GET(TC, cur))
*pcs ^= 1;
cur = phys_to_virt(cur->ptr_low);
}
return cur;
}
/* create and hook-up an intr queue into device schedule */
static void *
xhci_create_intr_queue(endpoint_t *const ep,
const int reqsize, const int reqcount,
const int reqtiming)
{
/* reqtiming: We ignore it and use the interval from the
endpoint descriptor configured earlier. */
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
const int ep_id = xhci_ep_id(ep);
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
if (reqcount > (TRANSFER_RING_SIZE - 2)) {
xhci_debug("reqcount is too high, at most %d supported\n",
TRANSFER_RING_SIZE - 2);
return NULL;
}
if (reqsize > 0x10000) {
xhci_debug("reqsize is too large, at most 64KiB supported\n");
return NULL;
}
2013-09-04 02:15:31 +02:00
if (xhci->dev[slot_id].interrupt_queues[ep_id]) {
xhci_debug("Only one interrupt queue per endpoint supported\n");
return NULL;
}
/* Allocate intrq structure and reqdata chunks */
intrq_t *const intrq = malloc(sizeof(*intrq));
if (!intrq) {
xhci_debug("Out of memory\n");
return NULL;
}
int i;
int pcs = tr->pcs;
trb_t *cur = tr->cur;
for (i = 0; i < reqcount; ++i) {
if (TRB_GET(C, cur) == pcs) {
xhci_debug("Not enough empty TRBs\n");
goto _free_return;
}
void *const reqdata = xhci_align(1, reqsize);
if (!reqdata) {
xhci_debug("Out of memory\n");
goto _free_return;
}
xhci_clear_trb(cur, pcs);
cur->ptr_low = virt_to_phys(reqdata);
cur->ptr_high = 0;
TRB_SET(TL, cur, reqsize);
TRB_SET(TT, cur, TRB_NORMAL);
TRB_SET(ISP, cur, 1);
TRB_SET(IOC, cur, 1);
cur = xhci_next_trb(cur, &pcs);
}
intrq->size = reqsize;
intrq->count = reqcount;
intrq->next = tr->cur;
intrq->ready = NULL;
intrq->ep = ep;
2013-09-04 02:15:31 +02:00
xhci->dev[slot_id].interrupt_queues[ep_id] = intrq;
/* Now enqueue all the prepared TRBs but the last
and ring the doorbell. */
for (i = 0; i < (reqcount - 1); ++i)
xhci_enqueue_trb(tr);
2013-09-04 02:15:31 +02:00
xhci->dbreg[slot_id] = ep_id;
return intrq;
_free_return:
cur = tr->cur;
for (--i; i >= 0; --i) {
free(phys_to_virt(cur->ptr_low));
cur = xhci_next_trb(cur, NULL);
}
free(intrq);
return NULL;
}
/* remove queue from device schedule, dropping all data that came in */
static void
xhci_destroy_intr_queue(endpoint_t *const ep, void *const q)
{
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
const int ep_id = xhci_ep_id(ep);
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
intrq_t *const intrq = (intrq_t *)q;
/* Make sure the endpoint is stopped */
2013-09-04 02:15:31 +02:00
if (EC_GET(STATE, xhci->dev[slot_id].ctx.ep[ep_id]) == 1) {
const int cc = xhci_cmd_stop_endpoint(xhci, slot_id, ep_id);
if (cc != CC_SUCCESS)
xhci_debug("Warning: Failed to stop endpoint\n");
}
/* Process all remaining transfer events */
xhci_handle_events(xhci);
/* Free all pending transfers and the interrupt queue structure */
int i;
for (i = 0; i < intrq->count; ++i) {
free(phys_to_virt(intrq->next->ptr_low));
intrq->next = xhci_next_trb(intrq->next, NULL);
}
2013-09-04 02:15:31 +02:00
xhci->dev[slot_id].interrupt_queues[ep_id] = NULL;
free((void *)intrq);
/* Reset the controller's dequeue pointer and reinitialize the ring */
2013-09-04 02:15:31 +02:00
xhci_cmd_set_tr_dq(xhci, slot_id, ep_id, tr->ring, 1);
xhci_init_cycle_ring(tr, TRANSFER_RING_SIZE);
}
/* read one intr-packet from queue, if available. extend the queue for new input.
return NULL if nothing new available.
Recommended use: while (data=poll_intr_queue(q)) process(data);
*/
static u8 *
xhci_poll_intr_queue(void *const q)
{
if (!q)
return NULL;
intrq_t *const intrq = (intrq_t *)q;
endpoint_t *const ep = intrq->ep;
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
/* TODO: Reset interrupt queue if it gets halted? */
xhci_handle_events(xhci);
u8 *reqdata = NULL;
while (!reqdata && intrq->ready) {
const int ep_id = xhci_ep_id(ep);
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr =
xhci->dev[ep->dev->address].transfer_rings[ep_id];
/* Fetch the request's buffer */
reqdata = phys_to_virt(intrq->next->ptr_low);
/* Enqueue the last (spare) TRB and ring doorbell */
xhci_enqueue_trb(tr);
xhci->dbreg[ep->dev->address] = ep_id;
/* Reuse the current buffer for the next spare TRB */
xhci_clear_trb(tr->cur, tr->pcs);
tr->cur->ptr_low = virt_to_phys(reqdata);
tr->cur->ptr_high = 0;
TRB_SET(TL, tr->cur, intrq->size);
TRB_SET(TT, tr->cur, TRB_NORMAL);
TRB_SET(ISP, tr->cur, 1);
TRB_SET(IOC, tr->cur, 1);
/* Check if anything was transferred */
const size_t read = TRB_GET(TL, intrq->next);
if (!read)
reqdata = NULL;
else if (read < intrq->size)
/* At least zero it, poll interface is rather limited */
memset(reqdata + read, 0x00, intrq->size - read);
/* Advance the interrupt queue */
if (intrq->ready == intrq->next)
/* This was last TRB being ready */
intrq->ready = NULL;
intrq->next = xhci_next_trb(intrq->next, NULL);
}
return reqdata;
}