coreboot-kgpe-d16/src/mainboard/google/nyan_blaze/reset.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <gpio.h>
#include <reset.h>

void do_board_reset(void)
{
        gpio_output(GPIO(I5), 0);
}
mb/google/nyan_blaze: Use SPDX for GPL-2.0-only files Done with sed and God Lines. Only done for C-like code for now. Change-Id: Ie2f0dac5a0dee26b965616d410e343569588db7e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> 2020-04-05 13:22:13 +02:00			`/* SPDX-License-Identifier: GPL-2.0-only */`
nyan: I2C: Implement bus clear when 'ARB_LOST' error occurs This is a fix for the 'Lost arb' we're seeing on Nyan during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> 2014-04-30 23:51:38 +02:00
gpio: Extend common GPIO header, simplify function names We've had gpiolib.h which defines a few common GPIO access functions for a while, but it wasn't really complete. This patch adds the missing gpio_output() function, and also renames the unwieldy gpio_get_in_value() and gpio_set_out_value() to the much easier to handle gpio_get() and gpio_set(). The header is renamed to the simpler gpio.h while we're at it (there was never really anything "lib" about it, and it was presumably just chosen due to the IPQ806x include/ conflict problem that is now resolved). It also moves the definition of gpio_t into SoC-specific code, so that different implementations are free to encode their platform-specific GPIO parameters in those 4 bytes in the most convenient way (such as the rk3288 with a bitfield struct). Every SoC intending to use this common API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most 4 bytes in length. Files accessing the API only need to include <gpio.h> which may pull in additional things (like a gpio_t creation macro) from <soc/gpio.h> on its own. For now the API is still only used on non-x86 SoCs. Whether it makes sense to expand it to x86 as well should be separately evaluated at a later point (by someone who understands those systems better). Also, Exynos retains its old, incompatible GPIO API even though it would be a prime candidate, because it's currently just not worth the effort. BUG=None TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and Veyron_Pinky. Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220975 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9400 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 2014-09-25 00:40:49 +02:00			`#include <gpio.h>`
Nyans: replace cpu_reset with hard_reset The existing cpu_reset does board-wide reset, thus, should be renamed. BUG=none BRANCH=none TEST=Built firmware for Nyans. Ran faft on Blaze. Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I5dc4fa9bae328001a897a371d4f23632701f1dd9 Original-Reviewed-on: https://chromium-review.googlesource.com/212982 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 29753b9c1dfe7ecd156042d69b74e9fe4244f455) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I98eca40c50637bda01a9029a904bca6880cd081f Reviewed-on: http://review.coreboot.org/9179 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> 2014-08-16 02:07:39 +02:00			`#include <reset.h>`
nyan: I2C: Implement bus clear when 'ARB_LOST' error occurs This is a fix for the 'Lost arb' we're seeing on Nyan during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> 2014-04-30 23:51:38 +02:00
reset: Convert individual boards to `board_reset()` Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> 2018-10-06 17:53:14 +02:00			`void do_board_reset(void)`
nyan: I2C: Implement bus clear when 'ARB_LOST' error occurs This is a fix for the 'Lost arb' we're seeing on Nyan during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> 2014-04-30 23:51:38 +02:00			`{`
			`gpio_output(GPIO(I5), 0);`
			`}`