coreboot-kgpe-d16/payloads/libpayload/drivers/usb/ehci.c

731 lines
21 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2010 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <libpayload.h>
#include "ehci.h"
#include "ehci_private.h"
static void dump_td(u32 addr)
{
qtd_t *td = phys_to_virt(addr);
usb_debug("td at phys(%x): status: %x\n\n", addr, td->token & QTD_STATUS_MASK);
usb_debug("- cerr: %x, total_len: %x\n\n", (td->token & QTD_CERR_MASK) >> QTD_CERR_SHIFT,
(td->token & QTD_TOTAL_LEN_MASK) >> QTD_TOTAL_LEN_SHIFT);
}
static void ehci_start (hci_t *controller)
{
EHCI_INST(controller)->operation->usbcmd |= HC_OP_RS;
}
static void ehci_stop (hci_t *controller)
{
EHCI_INST(controller)->operation->usbcmd &= ~HC_OP_RS;
}
static void ehci_reset (hci_t *controller)
{
short count = 0;
ehci_stop(controller);
/* wait 10 ms just to be shure */
mdelay(10);
if (EHCI_INST(controller)->operation->usbsts & HC_OP_HC_HALTED) {
EHCI_INST(controller)->operation->usbcmd = HC_OP_HC_RESET;
/* wait 100 ms */
for (count = 0; count < 10; count++) {
mdelay(10);
if (!(EHCI_INST(controller)->operation->usbcmd & HC_OP_HC_RESET)) {
return;
}
}
}
usb_debug("ehci_reset(): reset failed!\n");
}
static void ehci_reinit (hci_t *controller)
{
}
static int ehci_set_periodic_schedule(ehci_t *ehcic, int enable)
{
/* Set periodic schedule status. */
if (enable)
ehcic->operation->usbcmd |= HC_OP_PERIODIC_SCHED_EN;
else
ehcic->operation->usbcmd &= ~HC_OP_PERIODIC_SCHED_EN;
/* Wait for the controller to accept periodic schedule status.
* This shouldn't take too long, but we should timeout nevertheless.
*/
enable = enable ? HC_OP_PERIODIC_SCHED_STAT : 0;
int timeout = 100; /* time out after 100ms */
while (((ehcic->operation->usbsts & HC_OP_PERIODIC_SCHED_STAT) != enable)
&& timeout--)
mdelay(1);
if (timeout < 0) {
usb_debug("ehci periodic schedule status change timed out.\n");
return 1;
}
return 0;
}
static void ehci_shutdown (hci_t *controller)
{
/* Make sure periodic schedule is disabled */
ehci_set_periodic_schedule(EHCI_INST(controller), 0);
/* Free periodic frame list */
free(phys_to_virt(EHCI_INST(controller)->operation->periodiclistbase));
/* Free dummy QH */
free((void *)EHCI_INST(controller)->dummy_qh);
EHCI_INST(controller)->operation->configflag = 0;
free(EHCI_INST(controller));
free(controller);
}
enum { EHCI_OUT=0, EHCI_IN=1, EHCI_SETUP=2 };
/*
* returns the address of the closest USB2.0 hub, which is responsible for
* split transactions, along with the number of the used downstream port
*/
static int closest_usb2_hub(const usbdev_t *dev, int *const addr, int *const port)
{
const usbdev_t *usb1dev;
do {
usb1dev = dev;
if ((dev->hub > 0) && (dev->hub < 128))
dev = dev->controller->devices[dev->hub];
else
dev = NULL;
} while (dev && (dev->speed < 2));
if (dev) {
*addr = usb1dev->hub;
*port = usb1dev->port;
return 0;
} else {
usb_debug("ehci: Couldn't find closest USB2.0 hub.\n");
return 1;
}
}
/* returns handled bytes. assumes that the fields it writes are empty on entry */
static int fill_td(qtd_t *td, void* data, int datalen)
{
u32 total_len = 0;
u32 page_no = 0;
u32 start = virt_to_phys(data);
u32 page = start & ~4095;
u32 offset = start & 4095;
u32 page_len = 4096 - offset;
td->token |= 0 << QTD_CPAGE_SHIFT;
td->bufptrs[page_no++] = start;
if (datalen <= page_len) {
total_len = datalen;
} else {
datalen -= page_len;
total_len += page_len;
while (page_no < 5) {
/* we have a continguous mapping between virtual and physical memory */
page += 4096;
td->bufptrs[page_no++] = page;
if (datalen <= 4096) {
total_len += datalen;
break;
}
datalen -= 4096;
total_len += 4096;
}
}
td->token |= total_len << QTD_TOTAL_LEN_SHIFT;
return total_len;
}
/* free up data structures */
static void free_qh_and_tds(ehci_qh_t *qh, qtd_t *cur)
{
qtd_t *next;
while (cur) {
next = (qtd_t*)phys_to_virt(cur->next_qtd & ~31);
free((void *)cur);
cur = next;
}
free((void *)qh);
}
static int wait_for_tds(qtd_t *head)
{
int result = 0;
qtd_t *cur = head;
while (1) {
if (0) dump_td(virt_to_phys(cur));
/* wait for results */
/* how long to wait?
* tested with some USB2.0 flash sticks:
* TUR turn around took
* about 2s for the slowest (14cd:121c)
* max. 250ms for the others
* slowest non-TUR turn around took about 1.3s
* try 2s for now as a failed TUR is not fatal
*/
int timeout = 40000; /* time out after 40000 * 50us == 2s */
while ((cur->token & QTD_ACTIVE) && !(cur->token & QTD_HALTED)
&& timeout--)
udelay(50);
if (timeout < 0) {
usb_debug("Error: ehci: queue transfer "
"processing timed out.\n");
return 1;
}
if (cur->token & QTD_HALTED) {
usb_debug("ERROR with packet\n");
dump_td(virt_to_phys(cur));
usb_debug("-----------------\n");
return 1;
}
if (cur->next_qtd & 1) {
return 0;
}
if (0) dump_td(virt_to_phys(cur));
/* helps debugging the TD chain */
if (0) usb_debug("\nmoving from %x to %x\n", cur, phys_to_virt(cur->next_qtd));
cur = phys_to_virt(cur->next_qtd);
}
return result;
}
static int ehci_set_async_schedule(ehci_t *ehcic, int enable)
{
/* Set async schedule status. */
if (enable)
ehcic->operation->usbcmd |= HC_OP_ASYNC_SCHED_EN;
else
ehcic->operation->usbcmd &= ~HC_OP_ASYNC_SCHED_EN;
/* Wait for the controller to accept async schedule status.
* This shouldn't take too long, but we should timeout nevertheless.
*/
enable = enable ? HC_OP_ASYNC_SCHED_STAT : 0;
int timeout = 100; /* time out after 100ms */
while (((ehcic->operation->usbsts & HC_OP_ASYNC_SCHED_STAT) != enable)
&& timeout--)
mdelay(1);
if (timeout < 0) {
usb_debug("ehci async schedule status change timed out.\n");
return 1;
}
return 0;
}
static int ehci_process_async_schedule(
ehci_t *ehcic, ehci_qh_t *qhead, qtd_t *head)
{
int result;
/* make sure async schedule is disabled */
if (ehci_set_async_schedule(ehcic, 0)) return 1;
/* hook up QH */
ehcic->operation->asynclistaddr = virt_to_phys(qhead);
/* start async schedule */
if (ehci_set_async_schedule(ehcic, 1)) return 1;
/* wait for result */
result = wait_for_tds(head);
/* disable async schedule */
ehci_set_async_schedule(ehcic, 0);
return result;
}
static int ehci_bulk (endpoint_t *ep, int size, u8 *data, int finalize)
{
int result = 0;
int endp = ep->endpoint & 0xf;
int pid = (ep->direction==IN)?EHCI_IN:EHCI_OUT;
int hubaddr = 0, hubport = 0;
if (ep->dev->speed < 2) {
/* we need a split transaction */
if (closest_usb2_hub(ep->dev, &hubaddr, &hubport))
return 1;
}
qtd_t *head = memalign(32, sizeof(qtd_t));
qtd_t *cur = head;
while (1) {
memset((void *)cur, 0, sizeof(qtd_t));
cur->token = QTD_ACTIVE |
(pid << QTD_PID_SHIFT) |
(0 << QTD_CERR_SHIFT);
u32 chunk = fill_td(cur, data, size);
size -= chunk;
data += chunk;
cur->alt_next_qtd = QTD_TERMINATE;
if (size == 0) {
cur->next_qtd = virt_to_phys(0) | QTD_TERMINATE;
break;
} else {
qtd_t *next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur = next;
}
}
/* create QH */
ehci_qh_t *qh = memalign(32, sizeof(ehci_qh_t));
memset((void *)qh, 0, sizeof(ehci_qh_t));
qh->horiz_link_ptr = virt_to_phys(qh) | QH_QH;
qh->epchar = ep->dev->address |
(endp << QH_EP_SHIFT) |
(ep->dev->speed << QH_EPS_SHIFT) |
(0 << QH_DTC_SHIFT) |
(1 << QH_RECLAIM_HEAD_SHIFT) |
(ep->maxpacketsize << QH_MPS_SHIFT) |
(0 << QH_NAK_CNT_SHIFT);
qh->epcaps = (3 << QH_PIPE_MULTIPLIER_SHIFT) |
(hubport << QH_PORT_NUMBER_SHIFT) |
(hubaddr << QH_HUB_ADDRESS_SHIFT);
qh->td.next_qtd = virt_to_phys(head);
qh->td.token |= (ep->toggle?QTD_TOGGLE_DATA1:0);
head->token |= (ep->toggle?QTD_TOGGLE_DATA1:0);
result = ehci_process_async_schedule(
EHCI_INST(ep->dev->controller), qh, head);
ep->toggle = (cur->token & QTD_TOGGLE_MASK) >> QTD_TOGGLE_SHIFT;
free_qh_and_tds(qh, head);
return result;
}
/* FIXME: Handle control transfers as 3 QHs, so the 2nd stage can be >0x4000 bytes */
static int ehci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq,
int dalen, u8 *data)
{
int endp = 0; // this is control. always 0 (for now)
int toggle = 0;
int mlen = dev->endpoints[0].maxpacketsize;
int result = 0;
int hubaddr = 0, hubport = 0, non_hs_ctrl_ep = 0;
if (dev->speed < 2) {
/* we need a split transaction */
if (closest_usb2_hub(dev, &hubaddr, &hubport))
return 1;
non_hs_ctrl_ep = 1;
}
/* create qTDs */
qtd_t *head = memalign(32, sizeof(qtd_t));
qtd_t *cur = head;
memset((void *)cur, 0, sizeof(qtd_t));
cur->token = QTD_ACTIVE |
(toggle?QTD_TOGGLE_DATA1:0) |
(EHCI_SETUP << QTD_PID_SHIFT) |
(3 << QTD_CERR_SHIFT);
if (fill_td(cur, devreq, drlen) != drlen) {
usb_debug("ERROR: couldn't send the entire device request\n");
}
qtd_t *next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur->alt_next_qtd = QTD_TERMINATE;
/* FIXME: We're limited to 16-20K (depending on alignment) for payload for now.
* Figure out, how toggle can be set sensibly in this scenario */
if (dalen > 0) {
toggle ^= 1;
cur = next;
memset((void *)cur, 0, sizeof(qtd_t));
cur->token = QTD_ACTIVE |
(toggle?QTD_TOGGLE_DATA1:0) |
(((dir == OUT)?EHCI_OUT:EHCI_IN) << QTD_PID_SHIFT) |
(3 << QTD_CERR_SHIFT);
if (fill_td(cur, data, dalen) != dalen) {
usb_debug("ERROR: couldn't send the entire control payload\n");
}
next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur->alt_next_qtd = QTD_TERMINATE;
}
toggle = 1;
cur = next;
memset((void *)cur, 0, sizeof(qtd_t));
cur->token = QTD_ACTIVE |
(toggle?QTD_TOGGLE_DATA1:QTD_TOGGLE_DATA0) |
((dir == OUT)?EHCI_IN:EHCI_OUT) << QTD_PID_SHIFT |
(0 << QTD_CERR_SHIFT);
fill_td(cur, NULL, 0);
cur->next_qtd = virt_to_phys(0) | QTD_TERMINATE;
cur->alt_next_qtd = QTD_TERMINATE;
/* create QH */
ehci_qh_t *qh = memalign(32, sizeof(ehci_qh_t));
memset((void *)qh, 0, sizeof(ehci_qh_t));
qh->horiz_link_ptr = virt_to_phys(qh) | QH_QH;
qh->epchar = dev->address |
(endp << QH_EP_SHIFT) |
(dev->speed << QH_EPS_SHIFT) |
(1 << QH_DTC_SHIFT) | /* ctrl transfers are special: take toggle bit from TD */
(1 << QH_RECLAIM_HEAD_SHIFT) |
(mlen << QH_MPS_SHIFT) |
(non_hs_ctrl_ep << QH_NON_HS_CTRL_EP_SHIFT) |
(0 << QH_NAK_CNT_SHIFT);
qh->epcaps = (3 << QH_PIPE_MULTIPLIER_SHIFT) |
(hubport << QH_PORT_NUMBER_SHIFT) |
(hubaddr << QH_HUB_ADDRESS_SHIFT);
qh->td.next_qtd = virt_to_phys(head);
result = ehci_process_async_schedule(
EHCI_INST(dev->controller), qh, head);
free_qh_and_tds(qh, head);
return result;
}
typedef struct _intr_qtd_t intr_qtd_t;
struct _intr_qtd_t {
volatile qtd_t td;
u8 *data;
intr_qtd_t *next;
};
typedef struct {
volatile ehci_qh_t qh;
intr_qtd_t *head;
intr_qtd_t *tail;
intr_qtd_t *spare;
u8 *data;
endpoint_t *endp;
int reqsize;
} intr_queue_t;
static void fill_intr_queue_td(
intr_queue_t *const intrq,
intr_qtd_t *const intr_qtd,
u8 *const data)
{
const int pid = (intrq->endp->direction == IN) ? EHCI_IN
: (intrq->endp->direction == OUT) ? EHCI_OUT
: EHCI_SETUP;
const int cerr = (intrq->endp->dev->speed < 2) ? 1 : 0;
memset(intr_qtd, 0, sizeof(*intr_qtd));
intr_qtd->td.next_qtd = QTD_TERMINATE;
intr_qtd->td.alt_next_qtd = QTD_TERMINATE;
intr_qtd->td.token = QTD_ACTIVE |
(pid << QTD_PID_SHIFT) |
(cerr << QTD_CERR_SHIFT) |
((intrq->endp->toggle & 1) << QTD_TOGGLE_SHIFT);
fill_td(&intr_qtd->td, data, intrq->reqsize);
intr_qtd->data = data;
intr_qtd->next = NULL;
intrq->endp->toggle ^= 1;
}
static void ehci_destroy_intr_queue(endpoint_t *const, void *const);
static void *ehci_create_intr_queue(
endpoint_t *const ep,
const int reqsize,
int reqcount,
const int reqtiming)
{
int i;
if ((reqsize > (4 * 4096 + 1)) || /* the maximum for arbitrary aligned
data in five 4096 byte pages */
(reqtiming > 1024))
return NULL;
if (reqcount < 2) /* we need at least 2:
one for processing, one for the hc to advance to */
reqcount = 2;
int hubaddr = 0, hubport = 0;
if (ep->dev->speed < 2) {
/* we need a split transaction */
if (closest_usb2_hub(ep->dev, &hubaddr, &hubport))
return NULL;
}
intr_queue_t *const intrq =
(intr_queue_t *)memalign(32, sizeof(intr_queue_t));
/*
* reqcount data chunks
* plus one more spare, which we'll leave out of queue
*/
u8 *data = (u8 *)malloc(reqsize * (reqcount + 1));
if (!intrq || !data)
fatal("Not enough memory to create USB interrupt queue.\n");
intrq->data = data;
intrq->endp = ep;
intrq->reqsize = reqsize;
/* create #reqcount transfer descriptors (qTDs) */
intrq->head = (intr_qtd_t *)memalign(32, sizeof(intr_qtd_t));
intr_qtd_t *cur_td = intrq->head;
for (i = 0; i < reqcount; ++i) {
fill_intr_queue_td(intrq, cur_td, data);
data += reqsize;
if (i < reqcount - 1) {
/* create one more qTD */
intr_qtd_t *const next_td =
(intr_qtd_t *)memalign(32, sizeof(intr_qtd_t));
cur_td->td.next_qtd = virt_to_phys(&next_td->td);
cur_td->next = next_td;
cur_td = next_td;
}
}
intrq->tail = cur_td;
/* create spare qTD */
intrq->spare = (intr_qtd_t *)memalign(32, sizeof(intr_qtd_t));
fill_intr_queue_td(intrq, intrq->spare, data);
/* initialize QH */
const int endp = ep->endpoint & 0xf;
memset((void *)&intrq->qh, 0, sizeof(intrq->qh));
intrq->qh.horiz_link_ptr = PS_TERMINATE;
intrq->qh.epchar = ep->dev->address |
(endp << QH_EP_SHIFT) |
(ep->dev->speed << QH_EPS_SHIFT) |
(1 << QH_DTC_SHIFT) |
(0 << QH_RECLAIM_HEAD_SHIFT) |
(ep->maxpacketsize << QH_MPS_SHIFT) |
(0 << QH_NAK_CNT_SHIFT);
intrq->qh.epcaps = (1 << QH_PIPE_MULTIPLIER_SHIFT) |
(hubport << QH_PORT_NUMBER_SHIFT) |
(hubaddr << QH_HUB_ADDRESS_SHIFT) |
(0xfe << QH_UFRAME_CMASK_SHIFT) |
1 /* uFrame S-mask */;
intrq->qh.td.next_qtd = virt_to_phys(&intrq->head->td);
/* insert QH into periodic schedule */
int nothing_placed = 1;
u32 *const ps = (u32 *)phys_to_virt(EHCI_INST(ep->dev->controller)
->operation->periodiclistbase);
const u32 dummy_ptr = virt_to_phys(EHCI_INST(
ep->dev->controller)->dummy_qh) | PS_TYPE_QH;
for (i = 0; i < 1024; i += reqtiming) {
/* advance to the next free position */
while ((i < 1024) && (ps[i] != dummy_ptr)) ++i;
if (i < 1024) {
ps[i] = virt_to_phys(&intrq->qh) | PS_TYPE_QH;
nothing_placed = 0;
}
}
if (nothing_placed) {
usb_debug("Error: Failed to place ehci interrupt queue head "
"into periodic schedule: no space left\n");
ehci_destroy_intr_queue(ep, intrq);
return NULL;
}
return intrq;
}
static void ehci_destroy_intr_queue(endpoint_t *const ep, void *const queue)
{
intr_queue_t *const intrq = (intr_queue_t *)queue;
/* remove QH from periodic schedule */
int i;
u32 *const ps = (u32 *)phys_to_virt(EHCI_INST(
ep->dev->controller)->operation->periodiclistbase);
const u32 dummy_ptr = virt_to_phys(EHCI_INST(
ep->dev->controller)->dummy_qh) | PS_TYPE_QH;
for (i = 0; i < 1024; ++i) {
if ((ps[i] & PS_PTR_MASK) == virt_to_phys(&intrq->qh))
ps[i] = dummy_ptr;
}
/* wait 1ms for frame to end */
mdelay(1);
while (intrq->head) {
/* disable qTD and destroy list */
intrq->head->td.next_qtd = QTD_TERMINATE;
intrq->head->td.token &= ~QTD_ACTIVE;
/* save and advance head ptr */
intr_qtd_t *const to_free = intrq->head;
intrq->head = intrq->head->next;
/* free current interrupt qTD */
free(to_free);
}
free(intrq->spare);
free(intrq->data);
free(intrq);
}
static u8 *ehci_poll_intr_queue(void *const queue)
{
intr_queue_t *const intrq = (intr_queue_t *)queue;
u8 *ret = NULL;
/* process if head qTD is inactive AND QH has been moved forward */
if (!(intrq->head->td.token & QTD_ACTIVE)) {
if (!(intrq->head->td.token & QTD_STATUS_MASK))
ret = intrq->head->data;
else
usb_debug("ehci_poll_intr_queue: transfer failed, "
"status == 0x%02x\n",
intrq->head->td.token & QTD_STATUS_MASK);
/* insert spare qTD at the end and advance our tail ptr */
fill_intr_queue_td(intrq, intrq->spare, intrq->spare->data);
intrq->tail->td.next_qtd = virt_to_phys(&intrq->spare->td);
intrq->tail->next = intrq->spare;
intrq->tail = intrq->tail->next;
/* reuse executed qTD as spare one and advance our head ptr */
intrq->spare = intrq->head;
intrq->head = intrq->head->next;
}
/* reset queue if we fully processed it after underrun */
else if ((intrq->qh.td.next_qtd & QTD_TERMINATE) &&
/* to prevent race conditions:
not our head and not active */
(intrq->qh.current_td_ptr !=
virt_to_phys(&intrq->head->td)) &&
!(intrq->qh.td.token & QTD_ACTIVE)) {
usb_debug("resetting underrun ehci interrupt queue.\n");
intrq->qh.current_td_ptr = 0;
memset((void *)&intrq->qh.td, 0, sizeof(intrq->qh.td));
intrq->qh.td.next_qtd = virt_to_phys(&intrq->head->td);
}
return ret;
}
hci_t *
ehci_init (pcidev_t addr)
{
int i;
hci_t *controller = new_controller ();
if (!controller)
fatal("Could not create USB controller instance.\n");
controller->instance = malloc (sizeof (ehci_t));
if(!controller->instance)
fatal("Not enough memory creating USB controller instance.\n");
#define PCI_COMMAND 4
#define PCI_COMMAND_IO 1
#define PCI_COMMAND_MEMORY 2
#define PCI_COMMAND_MASTER 4
u32 pci_command = pci_read_config32(addr, PCI_COMMAND);
pci_command = (pci_command | PCI_COMMAND_MEMORY) & ~PCI_COMMAND_IO ;
pci_write_config32(addr, PCI_COMMAND, pci_command);
controller->type = EHCI;
controller->start = ehci_start;
controller->stop = ehci_stop;
controller->reset = ehci_reset;
controller->init = ehci_reinit;
controller->shutdown = ehci_shutdown;
controller->bulk = ehci_bulk;
controller->control = ehci_control;
controller->create_intr_queue = ehci_create_intr_queue;
controller->destroy_intr_queue = ehci_destroy_intr_queue;
controller->poll_intr_queue = ehci_poll_intr_queue;
controller->bus_address = addr;
controller->reg_base = pci_read_config32 (controller->bus_address, USBBASE);
for (i = 0; i < 128; i++) {
controller->devices[i] = 0;
}
init_device_entry (controller, 0);
EHCI_INST(controller)->capabilities = phys_to_virt(controller->reg_base);
EHCI_INST(controller)->operation = (hc_op_t *)(phys_to_virt(controller->reg_base) + EHCI_INST(controller)->capabilities->caplength);
/* default value for frame length adjust */
pci_write_config8(addr, FLADJ, FLADJ_framelength(60000));
/* Enable operation of controller */
controller->start(controller);
/* take over all ports. USB1 should be blind now */
EHCI_INST(controller)->operation->configflag = 1;
/* Initialize periodic frame list */
/* 1024 32-bit pointers, 4kb aligned */
u32 *const periodic_list = (u32 *)memalign(4096, 1024 * sizeof(u32));
if (!periodic_list)
fatal("Not enough memory creating EHCI periodic frame list.\n");
/*
* Insert dummy QH in periodic frame list
* This helps with broken host controllers
* and doesn't violate the standard.
*/
EHCI_INST(controller)->dummy_qh = (ehci_qh_t *)memalign(32, sizeof(ehci_qh_t));
memset((void *)EHCI_INST(controller)->dummy_qh, 0,
sizeof(*EHCI_INST(controller)->dummy_qh));
EHCI_INST(controller)->dummy_qh->horiz_link_ptr = QH_TERMINATE;
for (i = 0; i < 1024; ++i)
periodic_list[i] = virt_to_phys(EHCI_INST(controller)->dummy_qh)
| PS_TYPE_QH;
/* Make sure periodic schedule is disabled */
ehci_set_periodic_schedule(EHCI_INST(controller), 0);
/* Set periodic frame list pointer */
EHCI_INST(controller)->operation->periodiclistbase =
virt_to_phys(periodic_list);
/* Enable use of periodic schedule */
ehci_set_periodic_schedule(EHCI_INST(controller), 1);
/* TODO lots of stuff missing */
controller->devices[0]->controller = controller;
controller->devices[0]->init = ehci_rh_init;
controller->devices[0]->init (controller->devices[0]);
return controller;
}