This company doesn't do custom hardware anymore and doesn't
host the sources anymore. We therefore point to the archived
sources instead.
Change-Id: I5ce4f6a468b852fc1d0947fe2b28a5297f14c437
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/11889
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins)
Prmrr configuration is supported by Kabylake FSP-M with UPD provided.
It is required as one of the SGX initialization steps in BIOS.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set
size and boot.
Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18361
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It rewrites the results of receive enable stored in the upper nvram
region, to avoid running receive enable again.
Some debug info is also printed about the self-refresh registers.
(Not enforcing a reset here, since 0 does not necessarily mean it's
not in self-refresh).
Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17998
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Previously the raminit failed on hot reset and to work around this
issue it unconditionally did a cold reset.
This has the following issues:
* it's slow;
* when the OS issues a hot reset some disk drives expect their 5V
power supply to remain on, which gets cut off by a cold reset,
causing data corruption.
To fix this some steps in raminit must be ommited on the reset path.
This includes receive enable calibration.
To achieve this it stores receive enable results in RTC nvram for them
to be rewritten on the resume path.
Note: The same thing needs to be done on the S3 resume path.
Calling a hot reset after raminit "outb(0x6, 0cf9)" works.
Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18009
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Maxim 98927 kernel driver requires entries in the ACPI SSDT table,
add a SSDT generator as part of this driver.
BUG=chrome-os-partner:62051
BRANCH=None
TEST=After boot, dump and verify that the generated SSDT ACPI table has the
required entries.
Change-Id: Ic2d4d8449288bc00d085852220b2e1e7a208e9ef
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: M Naveen <naveen.m@intel.com>
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://review.coreboot.org/18211
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently there is no distinction between mainboards using
Skylake or Kabylake SoC, Add a config option for Kabylake
SoC to allow mainboards to explicitly select if they are
using it.
Change-Id: Ie7960bd81f88a223894afe3115ddc0bc637e4be4
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18312
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Configure GRUB to build with boot time statistics. That allows users
to add that module to GRUB by adding `boottime` to the list of extra
modules.
Change-Id: I76a07e49aecb37652fe8c7d6a9421fd464424287
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18367
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some simple implementation of the MultiBoot protocol may not pass a
memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two
values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO
flag.
Support those kind of boot loaders too, instead of falling back to the
hard-coded values in lib_get_sysinfo().
Tested with a multiboot enhanced version of FILO.
Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18350
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
There are MSRs that are programmable per-core not per-thread, so add
a function to check whether current executing CPU is a primary core
or a "hyperthreaded"/secondary core. For instance when trying to
program Core PRMRR MSRs(per-core) with mp_init, cpu exception is thrown
from the secondary thread. This function was used to avoid that.
Potentially this function can be put to common code or arch/x86 or cpu/x86.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified core PRMRR MSRs get programmed only on primary
thread avoiding exeception.
Change-Id: Ic9648351fadf912164a39206788859baf3e5c173
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18366
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implement the argc/argv passing as described in coreboot’s payload API:
http://www.coreboot.org/Payload_API
While at it, give the code some love by not needlessly trashing register
values.
Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Simplify the code by directly using the arguments on the stack as base
pointer relative memory references, instead of loading them into
intermediate registers first.
Make it more robust by preserving all callee saved registers mandated by
the C calling convention (and only those), namely EBP, EBX, ESI and EDI.
Don't assume anything about the register state when the called function
returns -- beside the segment registers and the stack pointer to be
still the same as before the call.
Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
According to coreboot’s payload API [1], the called payload should be
able to return a value via %eax. Support this by changing the prototype
of start_main() and pass on the return value of main() to the caller
instead of discarding it.
[1] https://www.coreboot.org/Payload_API
Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18334
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
According to coreboot’s payload API [1] the argc value should be passed
at stack offset 0x10, so we need to push a dummy value to comply to the
API.
[1] https://www.coreboot.org/Payload_API
Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support for generating digitizer node in SSDT using wacom i2c
driver.
BUG=None
BRANCH=None
TEST=Verified that the node shows up in SSDT.
Change-Id: If7e1e2463778c2ff7263eff995def149457edcde
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18373
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Similar to I2C driver, add support for generating SPI device and
required properties in SSDT for ACPI.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles succesfully. Verified SPI device generated in SSDT on
poppy.
Change-Id: Ic4da79c823131d54d9eb3652b86f6e40fe643ab5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18342
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
scan_smbus routine does not perform any smbus specific operation. Thus,
rename the routine to scan_generic_bus so that it can be used by other
buses like SPI. Add a wrapper scan_smbus to allow other users of smbus
scan to continue working as before.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I8ca1a2b7f2906d186ec39e9223ce18b8a1f27196
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18363
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support for a new "SPI" device type in the devicetree to bind a
device on the SPI bus. Allow device to provide chip select number for
the device as a parameter.
Add spi_bus_operations with operation dev_to_bus which allows SoCs to
define a translation method for converting "struct device" into a unique
SPI bus number.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18340
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Update sconfig lex and yacc files to add support for a new "SPI" device
type in the devicetree. SPI device takes only parameter i.e. chip select
number for the device on the SPI bus.
Re-generate the shipped files for sconfig using flex 2.6.0 and bison
3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak
into generated files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18339
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a new callback to spi_ctrlr structure - get_config - to obtain
configuration of SPI bus from the controller driver. Also, move common
config definitions from acpi_device.h to spi-generic.h
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I412c8c70167d18058a32041c2310bc1c884043ce
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18337
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The pointer to write the return value to is in %ecx, not %eax. Writing
to (%eax) leads to memory corruptions as %eax holds the return value,
e.g. would write zero to address zero for a "successful" returning
payload.
Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18332
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
According to coreboot’s payload API [1] the magic value passed to the
payload should be 0x12345678, not 12345678. Fix that.
[1] https://www.coreboot.org/Payload_API
Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit makes a basic adjustment for GPIOs, device tree, flash map and
MRC settings. With these basic settings the mainboard boots into
Linux lubuntu 4.8.0-22-generic using SeaBIOS. More adjustments will follow.
Change-Id: Ia920d236814f2e6a9b777dd1e4b4feef0ddf7721
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/18292
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Boot to OS with all threads enabled.
Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The four options are only used in X86:
- BOOTBLOCK_SIMPLE
- BOOTBLOCK_NORMAL
- BOOTBLOCK_SOURCE
- SKIP_MAX_REBOOT_CNT_CLEAR
Move them all into src/arch/x86/Kconfig - this puts them in the chipset
menu instead of general setup.
Verified that this makes no significant changes to any config file.
Change-Id: I2798ef67a8c6aed5afac34322be15fdf0c794059
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17909
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
For boolean types, 'n' is the default default value - it doesn't
NEED to be set. If it IS set, it prevents a later default from
being set. So by removing the 'default n' statements from the
early symbols, they can be overridden other places in the tree.
Verified that this makes no significant changes to any config file.
Change-Id: I1b5b66bd8a3df8154a348b5272c56c88829b3ab4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17908
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 32997fb0bc.
This change is breaking I2S audio on Kabylake platforms so
revert the change to fix audio.
BUG=chrome-os-partner:61548,chrome-os-partner:61009
TEST=manual testing on Eve P1 system
Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18360
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some variants need the internal pull resistor on GPIO_SSUS_40
set explicitly to pull down rather than disabling the pull,
in order for the ram-id to be read correctly via GPIO.
Correct this by adding a function to enable and set the internal pull
and define its use as needed in the board's variant.h.
Chromium source:
branch: firmware-gnawty-5216.239.B
/src/soc/intel/baytrail/baytrail/gpio.h#418
/src/mainboard/google/gnawty/romstage.c#60
Test: boot 4GB Candy board and observe correct RAM id, amount detected
Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18309
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Those are the result from tracing what linux or the option rom do
but are not needed here.
TESTED on Thinkpad X60.
Change-Id: I4297a78c4ab6a19ef6161778c993fc3f3fb08c7e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18294
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Poppy doesn't support 8042 keyboard. Select
NO_FADT_8042 to disable 8042 in FADT header.
Kernel will not try to access 8042 region
if 8042.FADT=0
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: I00182eb4b059d4d9f0705d349dc98651e3955f0d
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18311
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Kernel relies on FADT 8042 flag to enable/disable
8042 interface. If FADT reports 8042 capability and
8042 (/PS2) capability is actually disabled by coreboot,
kernel would assume the presence of 8042 based on the
FADT flag. This results in undesired system power off when
kernel tries to access the 8042 memory region. To address
this, CONFIG_NO_FADT_8042 was added to selectively
disable 8042 on FADT.
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update DPTF parameters based on thermal team test result.
1. Update TSR2 trigger points.
TSR2 passive point: 70, critical point: 90
2. Set PL2 Max to 15W.
BUG=chrome-os-partner:61383
BRANCH=reef
TEST=build, boot on snappy, and verified by thermal team
Change-Id: I8d01d6c1d7eabd359ceb131f3cd10965d4ac2c42
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18318
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Void pointer arithmetics are forbidden in standard C but GCC has
an extension that allows it.
Change-Id: I43029b2ab2f7709b8e1ba85eb05c31341b8ac16f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18293
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Performance degradation seen with current PL1 throttling rate as 8
seconds for TSR1 sensor with Aquarium workload. After fine tuning PL1
throttling rate to 15 seconds, fps score improved.
BUG=chrome-os-partner:60038
BRANCH=reef
TEST=Built and tested on electro system
Change-Id: I5cdebb08e00f0f28b88f1c6b2b1cafaeb8cdb453
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/18317
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
There will be more follow-up changes.
BUG=chrome-os-partner:62377
BRANCH=None
TEST=emerge-scarlet coreboot libpayload
Change-Id: I9ca45598ff0ab12bf8063d16a86be564cf509390
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a020a9ba1228b15599e202972df0096f58b1b31c
Original-Change-Id: I4804239483f8b35bc3703aa62c2a8fd642e0234a
Original-Signed-off-by: philipchen <philipchen@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/433039
Original-Commit-Ready: Philip Chen <philipchen@chromium.org>
Original-Tested-by: Philip Chen <philipchen@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18296
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
It's an attempt to consolidate the access code, even if there are still
multiple implementations in the code.
Change-Id: I4b2b9cbc24a445f8fa4e0148f52fd15950535240
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18265
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since it checks for DDR3 style checksums, it's a more appropriate name.
Also make its configuration local for a future code move.
Change-Id: I417ae165579618d9215b8ca5f0500ff9a61af42f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18264
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Paul Menzel