The QEMU XHCI driver does not implement the Port Change Detect bit
in the USBSTS register. As a result no devices are attached without
looking at each port individually.
Detect this as a quirk based on the QEMU XHCI controller PCI ID,
and apply it to the root hub quirk list so it can get used by the
generic hub driver to skip this check.
With this change an attached USB mass storage device is detected and
able to boot when supplied to qemu:
-drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img
-device qemu-xhci,id-xhci
-device usb-storage,bus=xhci.0,drive=usbmsc
Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-n needs to check against a string, but if CONFIG_TIANOCORE_BOOTSPLASH_FILE
is unset, then $(CONFIG_TIANOCORE_BOOTSPLASH_FILE) evaluates to nothing
and the check fails, leading the Makefile to try and copy a non-
existant file/path.
Change-Id: Iff717dd48748cff16f485bafaa91c7a225fb5bdb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
memcpy() is meant to be used on normal memory and often implemented with
architecture-specific optimizations to make that as performant as
possible. MMIO registers often have special access restrictions that may
be incompatible with whatever memcpy() does. For example, on arm64 it
uses the LDP (load pair) to load 16 bytes at a time, which makes 4-byte
MMIO registers unhappy.
This patch removes the caching of the XHCI capreg registers and changes
it back to a pointer. The CAP_GET() macro is still accessing a full
(non-bitfield) uint32_t at the end so this should still generate a
4-byte access (which was the goal of the original change in CB:39838).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Id058c8813087a8e8cb85f570399e07fb8a597108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Allow a custom boot splash to be used with UefiPayloadPkg:
- remove Kconfig guards restricting to CorebootPayloadPkg
- set destination path for logo file based on bootloader selected
Test: build/boot qemu with UefiPayloadPkg with custom boot logo
Change-Id: Ia0a10d1528f516f6b9d3645b83be0fb4e85bc348
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Recent changes to upstream edk2 necessitate ensuring
that Tianocore's submodules exist and are up to date,
otherwise building UefiPayloadPkg will fail.
Change method used to detect a dirty tree so that initialized
submodules do not taint the result.
Test: build qemu with Tianocore UefiPayloadPkg option successfully.
Change-Id: Ie2541f048966ec0666d8196508ccdb6c5f089de6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
`lib_sysinfo->serial` is a virtual pointer into coreboot tables.
It's not valid across relocation. Accessing the wrong value during
relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART
console enabled. Work around that by caching the whole table entry
locally.
An alternative would be to revise `sysinfo`, to contain no virtual
pointers to anything outside the payload.
Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reto Buerki <reet@codelabs.ch>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I4d9bc98863c4f33c19e295b642f48c51921ed984
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37069
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The QEMU XHCI controller does not support byte/word reads from the
capability register and it expects dword reads only.
In order to make this work move the access of the capability
register fields to use macros instead of a packed struct bitfield.
This issue was filed upstream:
https://bugs.launchpad.net/qemu/+bug/1693050
The original fix attempt in 2012 was not effective:
6ee021d410
With this change the controller is detected properly by the libpayload
USB drivers.
Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
nvramcui requires use of CMOS for NVRAM configuration,
so depend on HAVE_OPTION_TABLE and select USE_OPTION_TABLE
to ensure that nvramcui is actually functional when included
in a build.
Change-Id: I0595514f636b8ce67bbc789ecc96a93c99068c50
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Our realloc() works (somewhat suboptimally) by free()ing the existing
allocation and then reallocating it wherever it fits. If there was free
space before the old location, this means the new allocation may be
before the old one, and if the free space block is smaller than the old
allocation it may overlap. Thus, we should be moving memmove() instead
of memcpy() to move the block over.
This is not a problem in practice since all our existing memcpy()s are
simple iterate and copy front to back implementations which are safe for
overlaps when the destination is in front of the source. but it's still
the more correct thing to do (in case we ever change our memcpy()s to do
something more advanced or whatever).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I35f77a94b7a72c01364ee7eecb5c3ff5ecde57f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds the path to chrome EC headers to the depthcharge
build. Depthcharge currently includes a manually maintained copy of
the EC headers which are perpetually out of sync with the real
interface definitions. By adding the include path, we can build
depthcharge with the actual EC interface definitions and eliminate the
manual maintenance of copies of EC headers. Once the include path is
in place, we can remove the copies of the EC headers from depthcharge.
BUG=b:152373049
Change-Id: I1ce0ad9dc99ea52f177d4fb034fd23efd95a7864
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
If one branch has braces all should have them.
Change-Id: I94e70c6c6188768d9b37a2d154f4d5b8af31f78c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39396
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a function to set the RTC to provided struct tm.
Change-Id: I17b4c1ee0dcc649738ac6a7400b087d07213eaf0
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23585
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These macros serve no purpose anymore, let's do the substitution
manually once and for all. Also update the comment on the macros
and fix whitespace on the touched lines.
TEST=Checked that there are no changes in compiled code.
Change-Id: Ib60f9ab157e2e7d44b551dd4f695a6c25ebeb405
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5be3904298cd88c60dbc6d8d662beeede2abe442
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35960
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Lenovo T500 the RTC readings where wrong, as RTC has
different encodings, depending on the statusB register.
Support BCD vs binary RTC format and AM/PM vs 24h RTC format.
Fixes wrong date and time on Lenovo 500.
Change-Id: Id773c33e228973e190a7e14c3d11979678b1a619
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/18498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This makes payloads which are hardcoded to a 80x25 console look much
better, e.g. FILO with its "GRUB" user interface.
Change-Id: I9f4752328d85d148cd40a0c2337c7191e1d6a586
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Keeping a local copy of the framebuffer info allows us to make changes,
e.g. add offsets. It also avoids trouble with relocation.
Change-Id: I852c4eb229dd0724114acb302ab2ed7164712b64
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For a very long time, SeaBIOS sometimes failed to build when using
multiple threads. This known problem has been haunting everyone for a
very long time. Until now.
Unlike most other payloads, building SeaBIOS results in two files: the
SeaBIOS payload itself and SeaVGABIOS. Each file has its own target, and
there's a third target called "seabios", which has the same recipe as
the SeaBIOS file, which calls `payloads/external/SeaBIOS/Makefile` with
a bunch of arguments. In addition, SeaVGABIOS depends on "seabios".
When executing serially, if the file of either SeaBIOS or SeaVGABIOS is
needed, the SeaBIOS Makefile will be run. This will generate both files,
so it is not necessary to run the Makefile more than once.
However, when using multiple threads, it can happen that one thread
wants to make the SeaBIOS file, while another one wants to make the
SeaVGABIOS file, which depends on "seabios". This implies that both
threads will execute the SeaBIOS Makefile at about the same time, only
to collide when performing git operations. Since git uses a lock file
when updating the index, one of the threads will fail to acquire the
lock with an error, which will ultimately cause the build to fail.
Whenever this happened, manually aborting with Ctrl-C made the build
process fail again because of the same error. The only way to get past
this problem, other than using one thread, was to let the unfinished
jobs complete. The thread that acquired the lock on the SeaBIOS git
repository would finish building SeaBIOS, so that target would not need
to be remade. When restarting the build, only the target that failed is
rebuilt, so it does not collide with any other thread.
To address this issue, make the SeaVGABIOS file target depend directly
on the SeaBIOS file instead, and remove the duplicate "seabios" target.
Change-Id: I251190d3bb27052ff474f3cd1a45022dab6fac31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fix two out-of-bounds reads in lz4 decompression:
1) LZ4_decompress_generic could read one byte past the input buffer when
decoding variable length literals due to a missing bounds check. This
issue was resolved in libpayload, commonlib and cbfstool
2) ulz4fn could read up to 4 bytes past the input buffer when reading a
lz4_block_header due to a missing bounds check. This issue was resolved
in libpayload and commonlib.
Change-Id: I5afdf7e1d43ecdb06c7b288be46813c1017569fc
Signed-off-by: Alex Rebert <alexandre.rebert@gmail.com>
Found-by: Mayhem
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
cbfs_get_handle() and cbfs_get_attr() are both looping over elements to
find a particular one. Each element header contains the element's
length, which is used to compute the next element's offset. Invalid or
corrupted CBFS files could lead to infinite loops where the offset would
remain constant across iterations, due to 0-length elements or integer
overflows in the computation of the next offset.
This patch makes both functions more robust by adding a check that
ensure offsets are strictly monotonic. Instead of infinite looping, the
functions are now printing an ERROR and returning a NULL value.
Change-Id: I440e82fa969b8c2aacc5800e7e26450c3b97c74a
Signed-off-by: Alex Rebert <alexandre.rebert@gmail.com>
Found-by: Mayhem
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Upstream UEFIPayload[1] now includes support for PS2 keyboards, but
defaults it to disabled. Enable it, as CorebootPayload does.
Note that this increases payload size in coreboot by a little over 5 KiB.
1. 33a3293651
Change-Id: If6d468809142a0049ce1648217d62b070229ad6b
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38960
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The build process of this payload is unnecessarily prolix. Therefore,
make use of the `-q` flag to abridge the output.
TEST=When building for X64, UEFIPAYLOAD.fd does not differ.
Change-Id: I6eba069ff5be2813d180dae40ab10155f0542f33
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39123
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix an out-of-bounds read in the LZMA decoder which happens when the src
buffer is too small to contain the 13-byte LZMA header.
Change-Id: Ie442f82cd1abcf7fa18295e782cccf26a7d30079
Signed-off-by: Alex Rebert <alexandre.rebert@gmail.com>
Found-by: Mayhem
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: I8261bc28e5bc9aa32db1dccef7035486995c9873
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39051
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `chars` pointer references the heap which is part of the payload
and relocated along with it. So calling phys_to_virt() on it was
always wrong; and the virt_to_phys() at its initialization was a
no-op anyway, when the console was brought up before relocation.
While we are at it, add a null-pointer check.
Change-Id: Ic03150f0bcd14a6ec6bf514dffe2b9153d5a6d2a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch makes libpayload enable the instruction cache as the very
first thing, which is similar to how we treat it in coreboot. It also
prevents the icache from being disabled again during mmu_disable() as
part of the two-stage page table setup in post_sysinfo_scan_mmu_setup().
It replaces the existing mmu_disable() implementation with the assembly
version from coreboot which handles certain edge cases better (see
CB:27238 for details).
The SCTLR flag definitions in libpayload seem to have still been
copy&pasted from arm32, so replace with the actual arm64 defintions from
coreboot.
Change-Id: Ifdbec34f0875ecc69fedcbea5c20e943379a3d2d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
We set MPS to speed_to_default_mps(speed) initially
but later compare maxpacketsize with 8 to change mps.
So compare with speed_to_default_mps(speed) to determine
if we need to change settings here.
BUG=b:147783572
BRANCH=none
TEST=works with 12Mbps/8MPS USB device
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I32455483fceec56f14af6118b77615c14b3f9f39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38556
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
libpayload passes argc and argv to main(), and ignoring these arguments
causes a compile time error when using LTO.
Change-Id: I5d2b30158ebabe1d1534a9684874018483ad769b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38292
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A function draw_rounded_box() is added to draw a box with rounded
corners. In addition, this function is different from draw_box() in 2
ways:
- The position and size arguments are relative to the canvas.
- This function supports drawing only the border of a box (linear time
complexity when the thickness is fixed).
BRANCH=none
BUG=b:146105976
TEST=emerge-nami libpayload
Change-Id: Ie480410d2fd8316462d5ff874999ae2317de04f9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Print error message before error return for better debugging.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I52039dcab72c6295dfb6b887a7000a6d2bd050ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mathew King <mathewk@chromium.org>
To support showing CBMEM logs on recovery screen, add a function
cbmem_console_snapshot() to copy the CBMEM console to an allocated
buffer. Non-printable characters are automatically replaced with '?' to
ensure the returned string is printable.
BRANCH=none
BUG=b:146105976
TEST=emerge-nami libpayload
Change-Id: Ie324055f5fd8276f1d833fc9d04f60a792dbb9f6
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
SeaBIOS 1.13.0 has been tagged on 20191209. Major changes in this release:
* Support for reading logical CHS drive information from QEMU
* Workaround added for misbehaving optionroms that grab "int19"
* The TPM 2 "PCR bank" option can now be set from the TPM menu
* SeaVGABIOS support for QEMU "atiext" display
* Several bug fixes and code cleanups
see http://seabios.org/Releases
Change-Id: I37c8a72b0819bc4d19da9f7ab8e90f907e3e4dec
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
CB:37594 change the flag makes PC_KEYBOARD_IGNORE_INIT_FAILURE
obsolete. Remove it.
BUG=b:145130110
TEST=N/A
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idcf816155b32dd691b48a7479297b556d32dd6f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Wilco device uses the AT translated keyboard and doesn't need to set
scancode set. Remove the ignore flag and put into translation mode
instead.
BUG=b:145130110
TEST=Draillion keyboard is usable on every boot.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ie1053e24e44c5bad28b56cc92d091e24f3d9b6fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
According to the POSIX standard, %p is supposed to print a pointer "as
if by %#x", meaning the "0x" prefix should automatically be prepended.
All other implementations out there (glibc, Linux, even libpayload) do
this, so we should make coreboot match. This patch changes vtxprintf()
accordingly and removes any explicit instances of "0x%p" from existing
format strings.
How to handle zero padding is less clear: the official POSIX definition
above technically says there should be no automatic zero padding, but in
practice most other implementations seem to do it and I assume most
programmers would prefer it. The way chosen here is to always zero-pad
to 32 bits, even on a 64-bit system. The rationale for this is that even
on 64-bit systems, coreboot always avoids using any memory above 4GB for
itself, so in practice all pointers should fit in that range and padding
everything to 64 bits would just hurt readability. Padding it this way
also helps pointers that do exceed 4GB (e.g. prints from MMU config on
some arm64 systems) stand out better from the others.
Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
The bayou payload is not attached to the build system in any way, and
has not been for quite a while. Since selecting it in Kconfig does
nothing, remove this payload now that coreboot 4.10 has been released.
Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
gcc seems to have some stupid problem with deciding when to inline byte
swapping functions (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92716).
Using the compiler builtin instead seems to solve the problem.
(This doesn't yet solve the issue for the read_be32()-family of
functions, which we should maybe just get rid of at some point?)
Change-Id: Ia2a6d8ea98987266ccc32ffaa0a7f78965fca1cd
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To avoid trampling over interesting exception artifacts on the real
stack, our arm64 systems switch to a separate exception stack when
entering an exception handler. We don't want that to use up too much
SRAM so we just set it to 512 bytes. I mean it just prints a bunch of
registers, how much stack could it need, right?
Quite a bit it turns out. The whole vtxprintf() call stack goes pretty
deep, and aarch64 generally seems to be very generous with stack space.
Just the varargs handling seems to require 128 bytes for some reason,
and the other stuff adds up too. In the end the current implementation
takes 1008 bytes, so bump the exception stack size to 2K to make sure it
fits.
Change-Id: I910be4c5f6b29fae35eb53929c733a1bd4585377
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This patch changes all existing instances of clrsetbits_leXX() to the
new endian-independent clrsetbitsXX(), after double-checking that
they're all in SoC-specific code operating on CPU registers and not
actually trying to make an endian conversion.
This patch was created by running
sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g'
across the codebase and cleaning up formatting a bit.
Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This patch removes the recently added update8/16/32/64() API and
replaces it with clrsetbits8/16/32/64(). This is more in line with the
existing endian-specific clrsetbits_le16/32/64() functions that have
been used for this task on some platforms already. Rename clrsetbits_8()
to clrsetbits8() to be in line with the new naming.
Keep this stuff in <device/mmio.h> and get rid of <mmio.h> again because
having both is confusing and we seem to have been standardizing on
<device/mmio.h> as the standard arch-independent header that all
platforms should include already.
Also sync libpayload back up with what we have in coreboot. (I'm the
original author of the clrsetbits_le32-definitions so I'm relicensing
them to BSD here.)
Change-Id: Ie4f7b9fdbdf9e8c0174427b4288f79006d56978b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since struct vb2_shared_data already contains workbuf_size and
vboot_workbuf_size is never used in depthcharge, remove it from struct
sysinfo_t. In addition, remove lb_vboot_workbuf() and add
CBMEM_ID_VBOOT_WORKBUF pointer to coreboot table with
add_cbmem_pointers(). Parsing of coreboot table in libpayload is
modified accordingly.
BRANCH=none
BUG=chromium:1021452
TEST=emerge-nami coreboot libpayload depthcharge; Akali booted correctly
Change-Id: I890df3ff93fa44ed6d3f9ad05f9c6e49780a8ecb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Kconfig became stricter on what it accepts, so accomodate before
updating to a new release.
Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The MIPS architecture port has been added 5+ years ago in order to
support a Chrome OS project that ended up going nowhere. No other board
has used it since and nobody is still willing or has the expertise and
hardware to maintain it. We have decided that it has become too much of
a mainenance burden and the chance of anyone ever reviving it seems too
slim at this point. This patch eliminates all MIPS code and
MIPS-specific hacks.
Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After removing urara no board still uses this SoC, and there are no
plans to add any in the future (I'm not sure if the chip really exists
tbh...).
Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
buffer_to_fifo32() is a simple wrapper to buffer_to_fifo32_prefix(), but
unfortunately its arguments are swapped. This patch fixes the issue.
Change-Id: I6414bf51dd9de681b3b87bbaf4ea4efc815f7ae1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36942
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some special keys emit a prefix scan code 0xE0. We will ignore all
these except for the power button, F12 and cursor keys on drallion.
Media key mapping is set in depthcharge and will be sent to libpayload
keyboard driver. Whichever board requires this change will update its own
media key mapping.
BUG🅱️139511038
TEST=boot in recovery mode, press F12 to go to diagnostic mode and power
button to confirm. Also in recovery mode left arrow, right arrow, up arrow,
down arrow changes the language on the firmware screen.
Change-Id: I1c11939d18391bebe53ca21cf33a096ba369cd56
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36654
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for
boards not configuring it.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When 'make clean' is executed and there is no source code cloned for
GRUB2 in payloads/external/GRUB2/grub2 (so GRUB2 has never been used on
this tree) an error message is thrown:
"fatal: cannot change to 'grub2': No such file or directory"
This error happens when there is no grub2 directory and is caused by
line 20 in payloads/external/GRUB2/Makefile where a shell command is
used to check the state of the git repo for grub2. Thought the target
for this code (checkout) is not executed by 'make clean' the shell
evaluates the command as part of the Makefile sourcing and encounters a
missing directory.
This patch fixes this error by checking for the project directory before
the git status of the repo is evaluated.
Change-Id: Ieaa919e1ee5ec2a1ec3c840fa07a6ec16d230e88
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When the first CSW transfer failed, get_csw function will retry
CSW transfer again, but the return value is not updated.
Change-Id: I289916baa08d0a189d659164a0002347f6f435db
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Multiple git checkouts cause GRUB2 to constantly rebuild even if there
were no changes to code or config. This is due to changing timestamps.
Fix this by not creating or switching branches but instead rely on
`git checkout -f` which does not touch existing unchanged files.
To be sure to not break anyones workflow checkout is skipped and a
warning gets printed if the tree/index is unclean.
Change-Id: I7cf66f63268de973a654146a0a47c3d5ca516d4d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36343
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Mark files in CBFS as IBB (Initial BootBlock)
* Will be used to identify the IBB by any TEE
Change-Id: Idb4857c894b9ee1edc464c0a1216cdda29937bbd
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's a recurring pattern of reading cbtable entries that point into
cbmem entries. Move that pattern into its own function.
Coccinelle patch used for this:
@@
identifier T, T2;
expression TARGET;
@@
-struct cb_cbmem_tab *const T2 = (struct cb_cbmem_tab *)T;
-TARGET = phys_to_virt(T2->cbmem_tab);
+TARGET = get_cbmem_ptr(T);
Change-Id: I7bd4a7ad8baeeaebf0fa7d4b4de6dbc719bc781f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Now that FMAP is cached in CBMEM and its pointer is added to coreboot
table for quick lookup, this change adds a new member "fmap_cache" to
sysinfo_t that can be used by payloads to get to FMAP cache.
BUG=b:141723751
Change-Id: If894c20c2de89a9d8564561bc7780c86f3f4135a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Modify handle_category_key to handle both upper and lower case alphabets
in the coreinfo payload.
Change-Id: I3ccbf69e90ba7824ad6ec85d2ca59aa8f40b3006
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board
config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER.
This is mainly to avoid depthcharge config duplication.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
In interactive payloads, the USB stack's poll procedure is implicitly
called from the UI loop. Since all USB control transfers are handled
synchronously, polling hubs with these slows the UI significantly down.
So switch to interrupt transfers that are done asynchronously and only
perform control transfers when the hub reported a status change.
We use the interrupt endpoint's max packet size instead of the theo-
retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions
hubs that return too much data.
Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
add --show-error curl flag to see the error message, even on silent
mode.
Signed-off-by: Marcello Sylvester Bauer <sylvblck@sylv.io>
Change-Id: I4ad40718caab60413ffe9c1503a9870cb875dd43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
USB 3.1 GEN2 report speed type 4, add into speed enum.
BUG=b:139787920
BRANCH=N/A
TEST=Build libpayload and depthcharge on sarien and boot with
USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We're planning to have a use case with a custom USB device that
implements the USB mass storage protocol on its bulk endpoints, but does
not have the normal MSC class/protocol interface descriptors and does
not support class-specific control requests (Get Max LUN and Bulk-Only
Reset). We'd like to identify/enumerate the device via
usb_generic_create() in our payload but then reuse all the normal MSC
driver code. In order to make that possible, this patch factors a new
usb_msc_force_init() function out of usb_msc_init() which will
initialize an MSC device without checking its descriptors. It also adds
some "quirks" flags that allow devices registered this way to customize
behavior of the MSC stack.
Change-Id: I50392128409cb2a879954f234149a5e3b060a229
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some broken USB mass storage devices send another zero-length packet at
the end of the data part of a transfer if the amount of data was evenly
divisible by the packet size (which is pretty much always the case for
block reads). This packet will get interpreted as the CSW and screw up
the MSC state machine.
This patch works around this issue by retrying the CSW transfer when it
was received as exactly 0 bytes. This is the same mitigation the Linux
kernel uses and harmless for correctly behaving devices. Also tighten
validation of the CSW a little, making sure we verify the length before
we read any fields and checking the signature in addition to the tag.
Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Many peripheral drivers across different SoCs regularly face the same
task of piping a transfer buffer into (or reading it out of) a 32-bit
FIFO register. Sometimes it's just one register, sometimes a whole array
of registers. Sometimes you actually transfer 4 bytes per register
read/write, sometimes only 2 (or even 1). Sometimes writes need to be
prefixed with one or two command bytes which makes the actual payload
buffer "misaligned" in relation to the FIFO and requires a bunch of
tricky bit packing logic to get right. Most of the times transfer
lengths are not guaranteed to be divisible by 4, which also requires a
bunch of logic to treat the potential unaligned end of the transfer
correctly.
We have a dozen different implementations of this same pattern across
coreboot. This patch introduces a new family of helper functions that
aims to solve all these use cases once and for all (*fingers crossed*).
Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
corebootpayload package in upstream TianoCore was replaced with
UEFIPayload, add external payload build option for UEFIPayload.
BUG=N/A
TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on
QEMU q35 after PCIE_BASE set.
Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Variable length arrays are dangerous, so let's make sure they don't
sneak back into coreboot or any of the payloads.
Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested on qemu-riscv.
Depends on OpenSBI integration and proper memory detection in qemu.
Boots into Linux until initrd should be loaded.
Tested on SiFive/unleashed:
Boots into Linux until earlycon terminates.
Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sometimes the display native orientation does not match the device
default orientation, so allow rotation of the framebuffer before
it is displayed on screen.
set_pixel now take coordinates in the rotated coordinate system,
and converts the coordinates before writing to the framebuffer.
Also, screen.size now matches the rotated system (_not_ the
framebuffer size).
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
depthcharge prefers knowing where its input comes from
BUG=b:137378326
BRANCH=none
TEST=ctrl-d / enter to enter dev-mode works now.
Change-Id: I74b5be18c3583be17c73950ced93fad883690090
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Pass `XGCCPATH` instead of individual programs as that is what the
Makefile expects.
Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
vboot_handoff is no longer used in coreboot, and is not
needed in CBMEM or cbtable.
BUG=b:124141368, b:124192753
TEST=make clean && make runtests
BRANCH=none
Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
size_t is the natural integer type for strlen() and array indices, and
this fixes several integer conversion and sign comparison warnings.
Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Constify the string argument
- Change int to size_t, which is what xmalloc expects
Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The documented return value for strlcat is horribly wrong, as is the
return value itself. It should not return the number of appended bytes,
but rather the length of the concatenated string. From the man page:
The strlcpy() and strlcat() functions return the total length of the
string they tried to create. For strlcpy() that means the length of
src. For strlcat() that means the initial length of dst plus the
length of src. While this may seem somewhat confusing, it was done
to make truncation detection simple.
This change is more likely to fix existing code than break it, since
anyone who uses the return value of strlcat will almost certainly rely
on the standard behaviour rather than investigate coreboot's source code
to see that we have a quirky version.
Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The JUnit output from the libpayload builds was getting deleted by the
coreinfo build. Move the libpayload to later in the coreboot-gerrit
job.
Also add messages to stdout indicating the various libpayload configs
that are built and a message indicating when all libpayload builds are
complete.
BUG=b:137380189
TEST=Upload test commit that includes a libpayload compile error and
verify buildbot fails.
Change-Id: I43b55f402216582dcf81be34171437be345572ab
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GRUB 2.04 was released on July 5th, 2019, so update. The only change-log
is the git history. Some coreboot related changes are listed below.
1. coreboot: Changed cbmemc to support updated console format from
coreboot.
2. ahci: Increase time-out from 10 s to 32 s
3. normal/menu: Do not treat error values as key presses
When building from the git repository, `./bootstrap.sh` needs to be run
to set up Gnulib. Ignore the exit code, as older versions might not have
this script.
Change-Id: Iab0b87164ed86f15d3415af935998b59e0d76c45
Signed-off-by: Pablo <42.pablo.ms@gmail.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
A typo introduced in commit bf2c693f89
made the driver not build: DWC_SLEEP_TIME_US instead of
DWC2_SLEEP_TIME_US.
Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Keith Short <keithshort@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These functions are only used in the files they are defined in, so they
can be made static.
Change-Id: Ic7f78912803cbdd1cb3a75f7f69f526739dab6e7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Make sure that the type of the loop index matches the type of the upper
bound. This fixes several -Wsign-compare warnings.
Change-Id: I73a88355d86288609e03f7a6fcaec14dfedac203
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This function executes the cpuid instruction, which takes a 32 bit input
value (idx), and then stores output in eax, ebx, ecx, and edx, which are
all 32 bit registers. Update the prototype to use fixed-width integers,
and update all usage calls appropriately.
Change-Id: I15876fa35628d3a505864fb49be4fdab1fd19f4a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Increase the timeout for USB requests to 5 seconds for all USB host
controllers.
Prior to this fix, the xCHI driver was detecting false timeouts during
SET ADDRESS requests when nested downstream hubs were connected to the
xHCI root hub.
BUG=b:124730179
BRANCH=sarien
TEST=Build libpayload and depthcharge on sarien/arcada.
TEST=Without change replicate USB set address timeouts in depthcharge
when dock and 4K monitor connected (which includes a total of 4 USB
hubs). With timeout fix, depthcharge boots OS with no USB errors and
the same USB topology. Note that this tests xHCI operation only.
Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
calculate_color() uses the 'fbinfo' global that is initialized by
cbgfx_init(), so we need to run the latter before we can run the former
or we get a null pointer access.
Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* Add support for Linux 5.x
** Select PCI, which isn't the default anymore with 5.x
** Select google firmware driver, which wasn't build any more
* Add support for Intel LPSS uart
** Select MFD and MFD_INTEL_LPSS_PCI
** Increase console count to 32
* Add support for coreboot framebuffer
** Select FB_SIMPLE
* Add support for eMMC/SDHCI
** Select MMC_SDHCI_*
* Add support for u-root's localboot
** Select KEXEC_FILE_LOAD
** Select FIRMWARE_MEMMAP
Stats:
* Kernel size 1.9MiB
* U-root (core + systemboot) 4.6MiB
Tested on Intel APL Up² board:
* Fixes non working console on APL Up2 board and eMMC bootmedia shows up.
* Allows to boot GNU/Linux from eMMC using 'localboot'
Change-Id: Ib5bd33531741e588ac7d5ff6a02b0482f6655ddf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
UART RX needs to be re-initialized in libpayload
as it is getting reset at the end of coreboot.
Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
and make a configuraton for QEMU/ARM.
This CL allows building a sample libpayload for QEMU/ARM.
Change-Id: Ia32872c43a99357aa966de3582f6fdb2e2652517
Signed-off-by: Asami Doi <doiasami1219@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We had a value that was overloaded thrice.
By moving them in a common structure and ordering them by value such
issues are hopefully avoided in the future.
Also add a few values to libpayload that were only defined in
commonlib.
Change-Id: I227d078eebee2d92488454707d4dab8ecc24a4d8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32958
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We had a value that was overloaded thrice.
By moving them in a common structure and ordering them by value such
issues are hopefully avoided in the future.
Change-Id: I0c7762601d7620413989b458fa634d7606accc9d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32957
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Documentation is scarce on the matter, however the related coreboot
code suggests that after the ACK, the keyboard also sends the result
of the self test (passed/failed). It looks like this result is never
consumed here, probably resulting in further confusion for later com-
mands.
Let's revert this for now (if it's not too late for the 4.10 release)
and break things later again. IMHO, due to the fact that there are
dozens of different keyboard controller and keyboard implementations
and no accurate specification followed, such changes should be tested
on a lot of hardware before merge.
This reverts commit a99ed13e33.
This reverts commit 7ae606f57f.
Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset
keyboard and check the return value of keyboard_cmd() to compare
against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for
ACK and returns 1 or 0 based on whether ACK is received.
This change fixes the check introduced by CB:32951 to compare against
0 just like the other checks for keyboard_cmd(). Additionally, it adds
error messages for all failed commands in keyboard_init() to make the
prints consistent in case of failure.
BUG=b:134366527
TEST=Verified that logs do not contain "ERROR: Keyboard reset failed"
anymore.
Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Adding "SHELL := /bin/bash" to the Makefile makes sure, that we use the
bash shell which is needed here.
Tested with oh-my-zsh.
Change-Id: I71495e15b8f1a495af7d8ab21cc5235feb595e01
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33014
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add two new options:
* Disable the prompt "Press Ctrl+B for the iPXE command line..."
Add a boolean that disables the initial 2 second timeout.
* Include a script that is executed instead of showing a shell.
Allows to add a script that will be included into the iPXE ROM.
Tested on Lenovo T500 and PC Engines apu2.
Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Loading a libpayload based payload like coreinfo or FILO from SeaBIOS or
GRUB pressing keys does not give the expected results.
For example, pressing F1 gives the character 24 translated to scan code
6a. ESC for example 43 (111) in coreinfo loaded from SeaBIOS on QEMU
Q35.
The problem is not reproducible using the payload directly, that means
without SeaBIOS or GRUB. The problem seems to be, that those have already
initialized the PS/2 controller and AT keyboard.
Comparing it with coreboot’s PS/2 keyboard code, the keyboard needs to
be reset. That seems to fix the issue, when the keyboard was initialized
before.
TEST=Build coreboot for QEMU Q35 with SeaBIOS, and coreinfo as secondary
payload. Run
qemu-system-i386 -M q35 -L /dev/shm -bios build/coreboot.rom -serial stdio
press 3 to select the coreinfo payload, and verify that the keys F1 and
F2 are working.
Same with coreinfo loaded from GRUB on the ASRock E350M1.
Change-Id: I2732292ac316d4bc0029ecb5c95fa7d1e7d68947
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We got another tag in the meantime, so resolve the conflict.
Change-Id: I64cb5e02a9bed3d8746b75e451c13a1598341ba1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32954
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Pass the return value from early_mmc_wake_hw() to the payload so that
payload can skip sending CMD0 and resetting the card in case of success
or in case of a failure in firmware, payload can recover by sending
CMD0 and resetting the card.
BUG=b:78106689
TEST=Boot to OS
Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Needed to make libpayload build clean with -Wconversion.
BUG=b:111443775
BRANCH=none
TEST=make junit.xml shows fewer warnings with -Wconversion enabled
Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The 'last' variable is unused, and has been for the entire history of
this file.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Free several resources when AHCI initialization fails. Note that it is
only safe to free resources when the command engine has stopped, since
otherwise they may still be used for DMA.
Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Ctrl-delete does nothing, so it falls through to the default case.
Add a comment to make this explicit.
Found-by: Coverity Scan #1260878
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I4a6f51cb04696b6ebcb554c5667a5bbea58622c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Depthcharge uses the keyboard type to help determine whether
it can trust the keyboard for security-sensitive confirmations.
Currently it trusts anything except usb, but now there's a need
to distrust ec-based ps/2 keyboards that are associated with untrusted
ECs. To help facilitate this, coreboot needs to report more
details about non-usb keyboards, so this change replaces the current
instances of unknown with enum values that distinguish uart and gpio
from ec-based keyboards.
BUG=b:129471321
BRANCH=None
TEST=Local compile and flash to systems with trusted and non-trusted
ECs. Confirmed that security confirmation can't be performed via
keyboard on a system with an untrusted EC but can still be performed
on a system with a trusted EC.
Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The Kconfig file has been updated to show 1.12.1 but this is only
what gets displayed for the "stable" option. Fix this by updating
the actual git hash for the SeaBIOS 1.12.1 release tag.
Fixes: fb83ff1a8b ("Update stable from 1.12.0 to 1.12.1")
Change-Id: I76dc0dc8b651df0c6ff6f3c02819a70bab8c04cd
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Kconfig somehow adds spurious booleans for each alternative when the
choice itself has a name. That's fixed simply by removing the name.
Change-Id: Ic35f0697f1f7bb92c12414c17a8790464b376012
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
The name of the default configuration file for x86 coreboot changed.
Change-Id: I6544142a70bd3e1e13ee52eccbd5335f8375a4f6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Without this U-Boot ends up overwriting the coreboot .config when
generating a configfile.
Change-Id: I62fc0aa3ede0287ffc96915182a2ed5a4877f29d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Updating iPXE stable from commit id fd6d1f4660:
Fri Mar 31 09:08:13 2017 +0300
[thunderx] Use ThunderxConfigProtocol to obtain board configuration
to commit id ebf2eaf515:
Mar 18 10:24:08 2019 +0000
[intel] Add PCI ID for I219-V and -LM 6 to 9
This brings in 176 new commits
Change-Id: Id35fee38e0e61897a623dae35f42fc580e32d3ee
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about
330 seconds (0xffffffff / 13MHz). Timer and delay functions will not
work properly if the counter overflows. To fix that we should use the
64-bit timer (GPT6).
BUG=b:80501386
BRANCH=none
Test=emerge-elm coreboot; emerge-kukui coreboot
Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
set_option_with() expects a buffer of the exact size of the option.
Change-Id: I21332394f88cf2daa4f733a544627d6d3c6ef26c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The firmware is basically ignoring F11 and F12 without this change.
BUG=b:130143385
TEST=local compile and flash to device. Confirmed that press of F11 and F12
keys now generates appropriate keypress events (and the same codes that
are already generated by these keys on an external USB keyboard).
Signed-off-by: Matt Delco <delco@chromium.org>
Change-Id: Ic43114aa99fc0a1345782c81ed2b90f5569af383
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Our strtol() and strtoull() function contain almost exactly the same
code. This is a) bad in general and b) may cause the code to get out of
sync, such as it recently happened with CB:32029.
This patch changes strtol() to be based on strtoull() so that the main
parsing code exists only once, and also adds a strtoll() to round off
the library. Also fix the bounds imposed by strtoul() to be based on the
actual length of a 'long', not hardcoded to 32-bits (which is not
equivalent on all architectures).
Change-Id: I919c65a773cecdb11739c3f22dd0d182ed50c07f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Our current limits.h only provides (U)INT_MAX constants. This patch adds
most others expected by POSIX. Since some of these may be different
depending on architecture (e.g. 'long' is 32-bit on x86 and 64-bit on
arm64), provide a definition that will automatically figure out the
right value for the data model the compiler is using (as long as it's
using two's complement for signed integers, which I think we can assume
these days).
Change-Id: I1124a41279abd4f53d208270e392e590ca8eaada
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
New compilers are a little more stringent about defining the same
prototype more than once, so some of our CONFIG_LP_DEBUG_MALLOC wrappers
don't quite work the way they are written anymore. Also, several of the
printf()s weren't written 64-bit safe. And let's add some
double-evaluation safety while I'm here anyway... and I have no idea why
this ever depended on CONFIG_LP_USB, that just seems like a typo.
Change-Id: Ib54ebc3cfba99f372690365b78c7ceb372c0bd45
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/14921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Cast cpu_khz to a 64 bit integer to prevent possible
integer overflow (the multiplication is currently done
using 32 bit math). Similar to 61dac13 (libpayload:
timer: cast cpu_khz to make sure 64bit math is used).
Found-by: Coverity Scan, CID 1261177
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Iadb0abb7c7cc078f31a6d88d971f5d1b8ac62a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
One of many steps to compile with -Wconversion, as unsigned int and int
aren't the same thing.
BUG=b:111443775
BRANCH=none
TEST=make junit.xml shows fewer warnings with -Wconversion enabled
Change-Id: I9673ca70da32a1e5117b27fa89167e03379af9c1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
I just got hit by a double-evaluation bug again, it's time to attempt
to fix this once more. Unfortunately there are several issues that don't
make this easy:
- bitfield variables don't support typeof()
- local macro variables that shadow others trigger -Werror=shadow
- sign warnings with integer literal and unsigned var in typeof-MIN()
- ({ statement expressions }) can not be used outside functions
- romcc doesn't support any of the fancy GCC/clang extensions
This patch tries to address all of them as far as possible with macro
magic. We don't have the technology to solve the bitfield and
non-function context issues yet (__builtin_choose_expr() still throws a
"no statement expression outside a function" error if it's only in the
branch that's not chosen, unfortunately), so we'll have to provide
alternative macros for use in those cases (and we'll avoid making
__ALIGN_MASK() double-evaluation safe for now, since it would be
annoying to do that there and having an alignment mask with side
effects seems very unlikely). romcc can continue using unsafe versions
since we're hopefully not writing a lot of new code for it. Sign
warnings can be avoided in literal/variable comparisons by always using
the type of the variable there. Shadowing is avoided by picking very
explicit local variable names and using a special __COUNTER__ solution
for MIN() and MAX() (the only ones of these you're likely to nest).
Also add DIV_ROUND_UP() to libpayload since it's a generally quite
useful thing to have.
Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If using a commit/branch which doesn't use a boot logo,
we don't want the build to fail unnecessarily
Test: build with upstream Tianocore commit hash,
avoid failure after successful compilation.
Change-Id: Ic41bacbb97926e9538f434aecc0f0eebc5f6326f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This fixes a memory leak, which was partially resolved in
2d1e0eb (payloads/coreinfo: Free buffer before returning).
Found-by: Coverity Scan, CID 1373370 (RESOURCE_LEAK)
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I0efe94b9dfb27746828055427029c01c7f407ec2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32094
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
strtoull() can optionally take a second pointer as an out-parameter that
will be adjusted to point to the end of the parsed string. This works
almost right, but misses two important edge cases: firstly,when the
parsed string is "0", the function will interpret the leading '0' as an
octal prefix, so that the first actually parsed digit is already the
terminating '\0' byte. This will cause the function to early abort,
which still (correctly) returns 0 but doesn't adjust *endptr.
The early abort is pointless anyway -- the only other thing the function
does is run a for-loop whose condition is the exact inverse (so it's
guaranteed to run zero iterations in this case) and then adjust *endptr
(which we want). So just take it out. This also technically corrects the
behavior of *endptr for a completely invalid string, since the strtoull
man page says
> If there were no digits at all, strtoul() stores the original value of
> nptr in *endptr (and returns 0).
The second issue occurs when the parsed string is "0x" without another
valid digit behind it. In this case, we will still jump over the 0x
prefix so that *endptr is set to the first byte after that. The correct
interpretation in this case is that there is no 0x prefix, and instead a
valid 0 digit with the 'x' being invalid garbage at the end. By not
skipping the prefix unless there's at least one valid digit after it, we
get the correct behavior of *endptr pointing to the 'x'.
Change-Id: Idddd74e18e410a9d0b6dce9512ca0412b9e2333c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Create a new cbtable entry called VBOOT_WORKBUF for
storing a pointer to the vboot workbuf within the
vboot_working_data structure.
BUG=b:124141368, b:124192753
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: Id68f43c282939d9e1b419e927a14fe8baa290d91
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31887
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find payloads/ -type f | \
xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The IS_ENABLED() macro is pretty long and unwieldy for something so
widely used, and often forces line breaks just for checking two Kconfigs
in a row. Let's replace it with something that takes up less space to
make our code more readable. From now on,
if (IS_ENABLED(CONFIG_XXX))
#if IS_ENABLED(CONFIG_XXX)
shall become
if (CONFIG(XXX))
#if CONFIG(XXX)
Change-Id: I2468427b569b974303084574125a9e1d9f6db596
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
using '--single-branch' when cloning the tianocore repo
prevents the use of other branches/commits outside of the
checked-out coreboot_fb branch, so remove it.
Test: build with TIANOCORE_REVISION selected and revision
set to origin/master, verify checkout succeeds
Change-Id: If8c93aa87957ba2ff9ab7a58e84d2a25b48ec346
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When updating firmware, we may need to preserve some sections like VPD,
calibration data, ... etc. The logic can be hard-coded in updater as a
list of known names, but a better solution is to have that directly
declared inside FMAP area flags.
To do that, the first step is to apply the changes in flash map
(http://crosreview.com/1493767). A new FMAP_AREA_PRESERVE is now
defined and will be set in future with new syntax in FMD parser.
BUG=chromium:936768
TEST=make; boots an x86 image.
Change-Id: Idba5c8d4a4c5d272f22be85d2054c6c0ce020b1b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If a PS/2 AUX device is not present then the AUX test command
during i8042_probe() will time out and add ~500ms to the boot time.
In order to avoid this only test the PS/2 AUX port if
CONFIG_LP_PC_MOUSE is enabled.
BUG=b:126633269
TEST=boot on device without AUX port and check that this command
does not get executed, saving ~500ms at boot.
Change-Id: I2ebdecc66933bd33d320b17aa4608caf4aaf54aa
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If keys are pressed at boot some keyboard controllers will not
properly respond with an ACK to commands, which results in the
keyboard_init function aborting before it adds the keyboard to the
input device list.
This same keyboard controller will manage to properly return keyboard
data when keys are pressed later, so it is possible for it to be
functional in the payload even if it does not respond properly to
every command during initialization.
In order to allow payloads to use the keyboard when this happens a
new Kconfig option is added to ignore the keyboard ACK response and
always add the keyboard to the input device list. This option is
disabled by default and must be enabled by the specific boards that
need it.
BUG=b:126633269
TEST=boot on device with this controller and press keys during boot
and see that the keyboard is still functional in the payload.
Change-Id: Icc6053f99804f1b57d785cb04235b5c4b8d5426f
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add Kconfig options to use custom bootsplash file,
dependent on using MrChromebox's stable branch, with
help info conveying required file format.
Adjust Makefile to copy the custom bootsplash and
overwrite the default Logo.bmp file, handling both
absolute and relative paths, and restore the original
logo file after building so as to keep the working
directory clean.
Test: build with and without custom bootsplash, ensure
correct bootsplash displayed
Change-Id: I164f46777169801cff56633fd920bc81b7c8129a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
After loading compressed files in CBFS, we should check the decompressed
size is equal to the expected size. This might help us detect file
content corruption or compressor/decompressor bugs.
BUG=none
BRANCH=none
TEST=manually (we can still boot into kernel on Kukui, and verify that
loading files from CBFS still works by seeing ChromiumOS firmware
screen).
Change-Id: Ia756cc5477670dd0d1d8aa59d4160ab4233c6795
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31564
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, cbfs_decompress() calls ulzma() and ulz4f() for LZMA/LZ4
decompression. These two functions don't accept input/output size as
parameters. We can make cbfs_decompress more robust by calling ulzman()
and ulz4fn() instead. This could prevent us from overflowing destination
buffer.
BUG=none
BRANCH=none
TEST=boot into kernel on Kukui with COMPRESSED_PAYLOAD_LZMA /
COMPRESSED_PAYLOAD_LZ4.
Change-Id: Ibe617825bd000ed618791d8e3c5f65bbbd5f7e33
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Rather than attempt to maintain patches against upstream Tianocore, use
MrChromebox's coreboot framebuffer branch as the default build target.
Rework the Makefile to default to MrChromebox's coreboot_fb branch, but
also allow for aribitrary commits from upstream Tianocore to be used
as build targets.
Ensure the branch is synced on each build, as long as working directory
is clean, and that switching between commits or trees is handled sanely.
Eliminate TIANOCORE_MASTER as a selectable build target, since unpatched
it is unlikely to boot on any device. It can easily be specified via
the 'revision' option if desired.
Test: build for the default stable target, for upstream/master
as the specified revision, and for an arbitrary valid commit hash.
Change-Id: I4a83db3cd64c7d5b652c6e95780d10051f143e88
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
`off_t` is supposed to be signed, but has no (minimum) width
specified. We'll assume 32-bit minimum, like a `signed long int`.
Also include `sys/types.h` in `libpayload.h` so everything is
available through the latter.
Change-Id: I6c0c1bc1a959db7863cbad2ba29318da162431be
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
libfdt requires memchr. Add missing function to libc.
Change-Id: I872026559d16a352f350147c9d7c4be97456a99f
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/c/31354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
console->scroll_up() was hanging when console->rows is 0. This
was happening on delan if no screen was attached. If there are no
rows, just return.
BUG=b:119234919
TEST=Boot delan with no flat panel. System boots to OS
Change-Id: Ib022d3c6fc0c9cf360809dca28761a50c787304a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch removes several timer and serial drivers (and configs) that
were specific to platforms which have been dropped in coreboot.
Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Add the flag '--check=crc32' to the xz compression to use CRC32 for the
integrity check. The linux kernel does not support CRC64 for integrity
checks, which is the default flag on most xz applications.
Change-Id: I738bd99ef22aa053dc198df5595e1878069de13e
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/29935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Clean and refactor the structure of the LinuxBoot payload integration,
to make it more modular and readable. The kernel and initramfs should
handled in separated makefiles.
tested with:
- qemu-i440fx (x86, x86_64)
- cavium CN8100 (arm64)
Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/29581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Allow the inclusion of a generated option rom despite the presence of a
VGA BIOS. It is useful for dual graphics with an Intel GPU.
Change-Id: Ic3a219c2dc2133c3328192840538f0fbd1ed935a
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/29823
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SeaBIOS 1.12.0 has been tagged. News are
* Initial support for "TPM CRB" hardware
* Improved cdrom media reporting in the boot menu on QEMU
* Improved floppy support on real floppy hardware
* SeaVGABIOS support for QEMU "bochs-display" and QEMU "ramfb" displays
* Several bug fixes and code cleanups
among others, see http://seabios.org/Releases
Tested by running it on a Thinkpad X230.
Change-Id: I5f8364977ce957d3e8d84d7b046d1cec36b8da6a
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/c/29724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Patches should be applied against edk2 release instead of arbitrary
commit. This aims to simplify Tianocore payload support by other
platforms.
Change-Id: Ib409f6f93eb64d7a9a2f09a75f8e637ab8689410
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/27615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Merge the command-line and initramfs parser from 'a linux payload'
and 'LinuxBoot'.
GOAL: merge 'a Linux payload' and 'LinuxBoot'
Change-Id: I2d2aef5d07453b98e115af6ee06318c690def785
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29510
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. In this particular
situation, dev->buf is already pointer to u8, and there's no need to convert
to void *.
BUG=b:118484178
TEST=Build libpayload.
Change-Id: Ib70b8ce11abc88c35be4092f097cfff385921f46
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build coreinfo with original code, run objdump and saved output. Added
modifications, build coreinfo again, run objdump again, compared objdump
outputs.
Change-Id: I1bbdc9499d257c5051fd7a86ca8b5c68bbf2e81d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29344
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove Linuxboot initramfs path entry in Kconfig.
Custom initramfs can and should be used with 'Linux payload'.
Change-Id: I648fb2e0383d20b0e4d50e416af637ea07d1efb4
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Download the linux kernel tarball with curl.
Curl is already a dependency for coreboot.
Change-Id: I2e0bee3286593bd8e93b4d645242898eb9a14015
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fill reg_base with physical register base address.
Tested on Lenovo T500.
Change-Id: If42135c8e10b70d5ac9626521abd9cca3cf40053
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18600
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For debugging purposes always set the pciaddr attribute.
Tested on Lenovo T500.
Change-Id: I83a0e7f7196ed251fa0becc4e56bef3ca68f20f4
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18599
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds remote GDB support for the arm64 architecture.
Change-Id: I2fa4dbca6c39f822f489a5e81bd052f53fda98a5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/29020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The arm32 GDB architecture code contains a little hack that allows it to
(sort of) correctly deal with a reentrant exception triggered from
within the GDB stub. The main logic for this isn't really arm32 specific
and could be useful for other architectures as well, so factor it out
into a separate function.
Change-Id: I3c6db8cecf1e86bba23de6fd2ac9fdf0cf69d3c6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/29019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch reworks the arm64 exception handling to be more similar to
how it works on arm32. This includes a bunch of features like actually
saving and restoring more exception state in the exception_state
structure and supporting the same sort of partial reentrancy that is
useful for GDB. Since there's no instruction to directly load into or
store out of SP on arm64, we can't do quite the same thing where we use
that to read an exception_state_ptr variable right after exception entry
when no other register is available. But we can do something very
similar by (ab-)using the "high" stack pointer (SP_EL2) as a pointer to
the exception_state struct and providing a function to change it.
Change-Id: Ia16a1124be1824392a309ae1f4cb031547d184c1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/29018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds the new, faster architectural register accessors to
libpayload that were already added to coreboot in CB:27881. It also
hardcodes the assumption that coreboot payloads run at EL2, which has
already been hardcoded in coreboot with CB:27880 (see rationale there).
This means we can drop all the read_current/write_current stuff which
added a lot of unnecessary helpers to check the current exception level.
This patch breaks payloads that used read_current/write_current
accessors, but it seems unlikely that many payloads deal with this stuff
anyway, and it should be a trivial fix (just replace them with the
respective _el2 versions).
Also add accessors for a couple of more registers that are required to
enable debug mode while I'm here.
Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/29017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Mentioned patch could not be applied in coreboot-sdk:1.52. With this fix
patch apply correctly.
Change-Id: I130856520f91bcfbd9a62741b1d5abb6495a6eac
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Some payloads don't depend on their supported platforms, which makes
them visible in menuconfig even if they are not supported (yet).
Change-Id: Ia1ec0f0ca0b6521d0c024500c67326337f3d744f
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/28774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The extra firmware is not part of upstream kernel.
Fixes build error if the firmware is not present.
Change-Id: Ifbcb0bb0e2edf3aa260b40dfa339812019f9f0b3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This will make enabling the APIC safer by ignoring unknown interrupts
and not halting the system. Once all interrupt sources have been found
and handled DIE_ON_UNKNOWN_INTERRUPT can be set if desired.
BUG=b:116777191
TEST=Booted grunt, halted the kernel, and pushed the power button while
in S5. Verified that depthcharge logged the unknown exception.
APIC Init Started
APIC Configured
Ignoring interrupt vector 39
Change-Id: If4ed566ec284d69786c369f37e4e331d7f892c74
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Not used by x86 code anymore.
BUG=b:116777191
TEST=Validated that depthcharge can be built.
Change-Id: I25ad3903989a5433ce73d657cfdb93dd1f34f7b5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
We should have a spurious interrupt vector just incase we get one. The
handler doesn't need to do anything.
BUG=b:116777191
TEST=Booted depthcharge on grunt and inspected the register. I can't
generate a spurious interrupt, so I can't validate that the handler gets
called.
Change-Id: I9e49e617f4375eb5eb00d0715c1902f77e2bf284
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Only set end of interrupt (EOI) when the APIC In-Service vector matches
the interrupt vector. This makes it so we don't EOI a non APIC
interrupt.
BUG=b:116777191
TEST=Booted grunt with APIC enabled and verified depthcharge still
works.
Change-Id: I00bd1e7a0fcf2fc004feadc40d22ebfefe68b384
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This change is required to apply patch
06_CorebootPayloadPkg_keep_cb_table since conflict in white space
between patch and target file in edk2 makes patch rejected while
building under coreboot-sdk:1.52.
Change-Id: I38f7d46925cc00a2b5c5400e3fbf3579990f3fa5
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As per internal discussion, there's no "ChromiumOS Authors" that's
meaningful outside the Chromium OS project, so change everything to the
contemporary "Google LLC."
While at it, also ensure consistency in the LLC variants (exactly one
trailing period).
"Google Inc" does not need to be touched, so leave them alone.
Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
FIT payloads do not support compression. Currently this would thrown an error
like the following:
E: FIT images don't support whole-image compression, compress the kernel component instead!
With this patch, menuconfig will correctly *not* show payload compression for
FIT payloads, and this will correctly set compression to NONE.
Change-Id: If564e2f5c0d499bc30411d7bd41611790453d4ef
Signed-off-by: Andrea Barberio <insomniac@slackware.it>
Reviewed-on: https://review.coreboot.org/28732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Yabits (Yet another UEFI bootloader) is designed to be a slim and quick
alternative to Tianocore. It is still under heavy development.
https://web.archive.org/web/https://yabits.github.io/
Change-Id: I132970e952c605c73cfe33dc47f20170ae8aa899
Signed-off-by: Martin Roth <martin@coreboot.org>
Reviewed-on: https://review.coreboot.org/28590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
The i386.c file uses standard 3f8 UART for some simple diagnostic
prints, and the libpayload console otherwise.
This payload was used to debug Linux as a rampayload and was very helpful
for that work.
Change-Id: I1cce5528780cd825fd91a88137fa70abd9f218e7
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/28600
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change TianoCore payload default to use HPET timer. Add an option to use
8254 timer for legacy platform support.
BUG=N/A.
TEST=Build and boot up into UEFI shell on Whiskey Lake rvp platform.
Change-Id: I857704b0ca128fc9da193ae26a33c7cf89ad7320
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
This reduces power consumption on grunt by over 3W when sitting at the
depthcharge recovery screen.
BUG=b:109749762
TEST=Booted grunt in the recovery screen and made sure it continued to
work.
Change-Id: Id079c099ee4cf6a07724241af4400063f4551668
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28245
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Julius Werner <jwerner@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This method has a pause instruction to help the CPU relax a little bit.
Measuring grunt it saves about 80mW.
BUG=b:109749762
TEST=Made sure that grunt boots.
Change-Id: I045a941ed42fcc4f2dbdd65b5cbb42d84813f50c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28244
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace _delay with an arch_ndelay(). This way each arch can setup their
own delay mechanism.
BUG=b:109749762
TEST=Verified delay's still work on grunt.
Change-Id: I552eb30984f9c21e92dffc9d7b36873e9e2e4ac5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28243
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The apic_delay method will halt the CPU and wait for a timer interrupt
to fire. I went with usec because nsec is too granular to guarantee.
This method will be called from an arch_ndelay() method when the delay
is large enough to justify a sleep.
BUG=b:109749762
TEST=Tested it on grunt by changing the _delay method to call
apic_delay().
Change-Id: I80363f06bdb22d0907f895885e607fde1c4c468d
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is just the bare minimum required to initialize the APIC. I only
support xAPIC and chose not to support x2APIC. We can add that
functionality later when it's required.
I also made the exception dispatcher call apic_eoi so that the callbacks
won't forget to call it.
BUG=b:109749762
TEST=Booted grunt and verified that depthcharge continued to function
and that linux booted correctly. Also verified GDB still works.
Change-Id: I420a4eadae84df088525e727b481089ef615183f
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
BUG=b:109749762
TEST=Verified GDB still functions by hitting Ctrl+G on the developer
screen and stepping through some code.
Change-Id: I723a8a95f681c500d9d8e35e49fd1d893cb1f133
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
I need to setup the APIC timer to fire interrupts. I would like to reuse
the existing interrupt table. So I extended it to support user defined
interrupts. I just added all 255 vectors so there wouldn't need to be
any additional build time configuration.
I'm going to deprecate exception_install_hook and remove it in a follow
up. It will be replaced with set_interrupt_handler. This way the
exception lookup does not have to manage a list of callbacks, or have to
worry about the order they are processed.
BUG=b:109749762
TEST=Wrote an interrupt handler and fired an APIC timer interrupt and
verified that vector 32 was returned.
Change-Id: Id9c2583c7c3d9be4a06a25e546e64399f2b0620c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Will be used by the APIC.
BUG=b:109749762
TEST=Verified by the other cls in the stack.
Change-Id: Id86f2719d98a90318ac625e09601e5dbb06e3765
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Since libpayload doesn't link against libgcc we need to define our own
cpuid macro. I didn't add any error checking since anything in the last
decade should support cpuid.
BUG=b:109749762
TEST=called it and made sure the correct flags were returned.
Change-Id: Id09878ac80c74416d0abca83e217516a9c1afeff
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Because the Kconfig configuration files for primary payloads are
already sourced via a wildcard pattern this change requires to
use another file name pattern.
Change-Id: I83b89f5e14618e8a487ebb044fcdd3c175662591
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Since we can derive chromeos_acpi's location from that of
ACPI GNVS, remove chromeos_acpi entry from cbtable and
instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET.
BUG=b:112288216
TEST=None
CQ-DEPEND=CL:1179725
Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There is a confusingly named section in cbmem called vdat.
This section holds a data structure called chromeos_acpi_t,
which exposes some system information to the Chrome OS
userland utility crossystem.
Within the chromeos_acpi_t structure, there is a member
called vdat. This (currently) holds a VbSharedDataHeader.
Rename the outer vdat to chromeos_acpi to make its purpose
clear, and prevent the bizarreness of being able to access
vdat->vdat.
Additionally, disallow external references to the
chromeos_acpi data structure in gnvs.c.
BUG=b:112288216
TEST=emerge-eve coreboot, run on eve
CQ-DEPEND=CL:1164722
Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/27888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Curley brace expansion is a bash-ism, so we can't use it for the
u-root command list.
This unfortunately also breaks the current Kconfig option since the
list needs to be separated by space instead of commas.
Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
BUG=none
TEST=compiled on grunt and made sure USB still works in depthcharge
Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fixes build with gcc8.1
Change-Id: I042f79ddfb4c249e00b5b259280289b8534f6854
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/27546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add support for ARCH=ARM64 and introduce CROSS_COMPILE for all architectures.
* Always compress kernel Image using xz
* Create FIT uImage containing the kernel, initramfs and DTB
* Add ARM64 defconfig for all SoCs
Change-Id: I9a0cc248283432fb2384956ca55e687d4127398c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
If a port disconnects after a reset we should abort any initialization
on the port. This might mean the device has re-enumerated as a 3.0 device
so the hub should be scanned again.
BUG=b:76831439
TEST=Verified USB-C devices that get detected correctly in depthcharge.
Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Make it obvious that the command has failed.
BUG=b:76831439
TEST=Verified on grunt
Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum
is unsigned so this results in a positive value which implies success.
Adding a -1 to the enum will make it signed so the >= 0 check will work
correctly.
BUG=b:76831439
TEST=verified on grunt that -1 is returned when port is disabled.
Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This makes it easier to know what offset each register references.
BUG=b:76831439
TEST=none
Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
As *None* is special and not a payload, it makes sense to put it at the
top. Also, it was at before the latest addition of the FIT payload
choice.
Fixes: a892cde6 (lib: Add FIT payload support)
Change-Id: I52163ea9472308ecbc396012d9912b9617e0c318
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/27414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
SeaBIOS 1.11.2 was tagged with the following changes:
```
f9626cc cbvga_set_mode: refine clear display logic
f88297a qemu: add qemu ramfb support
a2e4001 vgasrc: add allocate_pmm()
17b01f4 pmm: use tmp zone on oom
44b17d0 bochs_display_setup: return error on failure
4ba61fa cbvga_set_mode: disable clearmem in windows x86 emulator.
dd69189 cbvga_list_modes: don't list current mode twice
5f0e7c9 cbvga_setup_modes: use real mode number instead of 0x140
961f67c qemu: add bochs-display support
767365e cbvga: factor out cbvga_setup_modes()
7906460 optionrom: enable non-vga display devices
```
Tested by running it on a Thinkpad X230.
Change-Id: Iea13eb64b3d5af0b283bff096587a3039227b5c0
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/27326
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since SeaBIOS 1.11.0 implements serial console and etc/sercon-port
runtime config file is present in CBFS, SeaBIOS additionally
redirects iPXE output to configured IO port. For boards which use
the same UART for SeaBIOS and iPXE console it causes doubled
output.
The option is enabled by default and passes UART configuration
to iPXE Makefile as before. When unselected, only SeaBIOS handles
printing output from iPXE.
Change-Id: Ia3c74cfbee4f816782161fcff286a14f46be78c5
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change ensures that keyboard scanning is disabled and keyboard is
set to default state while disconnecting the keyboard. This is
required to ensure that the controller doesn't keep scanning and
buffering keystrokes which could lead to OS drivers reading stale
data.
BUG=b:110024487
TEST=Verified that kernel driver is able to probe correctly even if
multiple keys are pressed during handoff from payload to OS.
Change-Id: I1ffb8904d545284454c1825ee2e7c0087fc13762
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add CONFIG_LP_CHROMEOS to configuration file
Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/26711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The packge uuid-devel doesn't provide the required files,
but libuuid-devel does.
Change-Id: I61d537e4f1fca0d7172c129a75e13aa58452763f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`freetype-config` is gone and was obsolete for a long time.
Change-Id: Id3058e55b1630f43225d3cd1ad91801c4085874f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/26822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Add support for parsing and booting FIT payloads.
* Build fit loader code from depthcharge.
* Fix coding style.
* Add Kconfig option to add compiletime support for FIT.
* Add support for initrd.
* Add default compat strings
* Apply optional devicetree fixups using dt_apply_fixups
Starting at this point the CBFS payload/ can be either SELF or FIT.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.16.3.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.15.0.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.1.52.
Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
In order to support booting a GNU/Linux payload on non x86, the FIT format
should be used, as it is the defacto standard on ARM.
Due to greater complexity of FIT it is not converted to simple ELF format.
Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'.
The payload is included as is, with no special header.
The code can determine the type at runtime using the CBFS_TYPE field.
Support for parsing FIT payloads in coreboot is added in a follow on
commit.
Compression of FIT payloads is not supported, as the FIT sections might be
compressed itself.
Starting at this point a CBFS payload/ can be either of type FIT or SELF.
Tested on Cavium SoC.
Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Per PCI specification, function 0 must be present,
so functions 1 to 7 can be skipped in this case.
For a device that is not multi-function, it may not
decode function number in the hardware at all. To
avoid registering such a device eight times, skip
scanning functions 1 to 7.
Without the latter fix, a single-function PCI bridge
may call pci_scan_bus() second time and secondary
side devices would get appended second time in the
array devices[]. At that point, quicksort() apparently
hits an infinite recursion loop.
Since pci_scan_bus() is called in part of the early
modules->init() sequence early in main(), the errors
here left coreinfo payload completely silent when
PCI module was built-in on affected system.
Terminal screen was cleared, though.
Change-Id: Ifc6622f050b98afb7196de0cc3a863c4cdfa6c94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Last time there was a request to change a link from HTTP to HTTPS, also
it seems more ethical to use a link to the Free Software Foundation
server. SHA1 is the same - 7fcaa428c6d0de7096d1e4fbfd14848096ae5aad.
Change-Id: I55147ee2668de03ba6e9feb84936de24b2a001df
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Earlier this message has not been shown even at the corner of screen.
This fixes it by refreshing the screen, and moves it to the center.
Change-Id: If4e33e884c00c17f19ab330167d9293c8396ff3e
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Earlier it was impossible to exit without pressing the power button.
Change-Id: Ia56d639fa8e563047fb3d2723695626a449ead40
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23853
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes two buffer overflows and opens a road to further improvements.
All the previous adjustments to libpayload_tint.patch (including the
latest "use the current time as random seed") have been preserved.
Change-Id: I22e65d18a0b1551f7049c4afe7f95868f584cf9b
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23852
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add function to get active keyboard modifiers.
Change-Id: Ifc7bd4aa86f20d67c5b542d0458b966e605c5499
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18601
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new method to retrieve active usb keyboard modifiers.
Change-Id: Ief6679ce782b58b9ced207f4f27504fb2a517b76
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18602
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
keyboard_disconnect was called without keyboard_init being called and in this
case keyboard_havechar returns true because i8042_data_ready_ps2 is
dereferencing uninitialized variable ps2_fifo from within fifo_is_empty causing
keyboard_disconnect to be stuck in this while loop.
while (keyboard_havechar())
keyboard_getchar();
BUG=b:80299098
TEST=Check if the normal mode path in depthcharge is not causing a hang
Change-Id: I944b4836005c887a2715717dff2df1b5a220818e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/26590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We already have that Kconfig flag, so I guess we should use it for
consistency.
Change-Id: I61ee6a97e369ccfe5c55d4414a5fa91c8d80ecf7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/26351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This reverts commit 717ba74836.
This breaks seabios and a few other payloads. This is not
ready for use.
Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/26310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make use of i8042 driver to add PS2 mouse driver support.
Tested on Lenovot T500.
The touchpad can be used to drive the mouse cursor.
Change-Id: I4be9c74467596b94d64dfa510824d8722108fe9c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Make use of i8042 driver in keyboard.c.
Required to add PS/2 mouse support.
Tested on Lenovo T500.
Change-Id: If60b5ed922b8fc4b552d0bfd9fe20c0fd6c776bf
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18596
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, adding a payload to CBFS using the build system, the warning
below is shown.
W: Unknown type 'payload' ignored
Update payload type from "simple elf" to "simple_elf" and rename the
word "payload" to "simple_elf" in all Makefiles.
Fixes: 4f5bed52 (cbfs: Rename CBFS_TYPE_PAYLOAD to CBFS_TYPE_SELF)
Change-Id: Iccf6cc889b7ddd0c6ae04bda194fe5f9c00e495d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26240
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a common i8042 driver that uses multiple overflowing
fifos to seperate PS/2 port and PS/2 aux port.
Required to support PC keyboard and PC mouse at the same time.
Tested on Lenovo T500.
Change-Id: I4ca803bfa3ed45111776eef1f4dccd3fab02ea39
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18594
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In preparation of having FIT payloads, which aren't converted to simple ELF,
rename the CBFS type payload to actually show the format the payload is
encoded in.
Another type CBFS_TYPE_FIT will be added to have two different payload
formats. For now this is only a cosmetic change.
Change-Id: I39ee590d063b3e90f6153fe655aa50e58d45e8b0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add: raw_read_cntfrq_el0() and raw_read_cntpct_el0()
Required to support Arch64 Timer
Change-Id: I86aa97039304b9e9336d0146febfe1811c9e075a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
When GDB support is compiled in, halt() in libpayload will call
gdb_enter(). halt() is defined in <stdlib.h> and gdb_enter() in
<libpayload.h>. Usually files just include <libpayload.h> so this is not
a problem, but in some situatons a payload may just include <stdlib.h>
(or a file including it like <assert.h>), leading to an undeclared
identifier here. Move the GDB functions to <stdlib.h> to solve this.
Change-Id: I7b23b8ac9cd302aa6ef96f24565130490ac40071
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25730
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The VA space needs to be extended to support 48bit, as on Cavium SoCs
the MMIO starts at 1 << 47.
The following changes were done to coreboot and libpayload:
* Use page table lvl 0
* Increase VA bits to 48
* Enable 256TB in MMU controller
* Add additional asserts
Tested on Cavium SoC and two ARM64 Chromebooks.
Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/24970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
SeaBIOS 1.11.1 was released with the changes below.
```
$ git log --oneline rel-1.11.0..rel-1.11.1
0551a4b paravirt: Only enable sercon in NOGRAPHIC mode if no other console
specified
a7aa43e pci: fix 'io hints' capability for RedHat PCI bridges
0e739f2 shadow: Don't invoke a shutdown on reboot unless in a reboot loop
5d9a515 build: Use git describe --always
```
Change-Id: Ia77e98edcd42b28677de9670ce13c2ea5d327315
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
GRUB2 doesn't support all architectures that coreboot supports.
Furthermore, coreboot's build script for GRUB2 doesn't support all of
these architectures.
Let the user select GRUB2 only when building for x86 and ARM, which are
known to work.
Change-Id: I5ef2020b2acb4cd008a57a2372734674f8b84a36
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The USBHID driver zero-initializes some but not all of the fields in its
usbhid_inst_t structure. This is a problem because under some
circumstances, some of the uninitialized fields may be read and lead to
incorrect behavior. Some (broken) USB keyboards keep sending reports
that contain all zeroes even when they have no new keys... these usually
get silently ignored, but if the usbhid_inst_t structure is in an
inconsistent state where 'previous' is zeroed out but 'lastkeypress'
is non-zero because it wasn't properly initialized, these reports will
be interpreted as keyrepeats of the bogus 'lastkeypress'. This patch
changes the code to just xzalloc() the whole structure so we won't have
to worry about initialization issues anymore.
Change-Id: Ic987de2daaceaad2ae401a1e12b1bee397f802ee
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Kconfig variables TIANOCORE_REVISION and TIANOCORE_REVISION_ID
do not have an effect without this fix, the build process would
checkout the hard-coded stable hash even if these variables are set.
Change-Id: I9711a370eeade3cba0a9e127deb3d96d82adc512
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Reviewed-on: https://review.coreboot.org/22983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Both GRUB and SeaBIOS can chainload lzma compressed payloads.
Therefore it is beneficial to compress secondary payloads
like Memtest86+, coreinfo, nvramcui,... for both size reasons and
often also speed reasons since the limiting factor is generally the
IO of the boot device.
Tested with SeaBIOS and memtest86+ master on Thinkpad X220.
Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Part of the original patch, commit 85a90e1, reverted edk2 commit:
1d7258f [CorebootModulePkg:Removing EFI_RESOURCE_ATTRIBUTE_TESTED]
which had the unintended effect of causing memory above 2GiB
from being unavailable (marked reserved) when booting without a
connected display (aka headles mode).
This commit strips the patch to only the component needed to fix
reading of the coreboot table low memory pointer.
TEST: boot 4GB google/panther without connected display, verify
memory above 2GB available via 'dmesg | grep BIOS-e820' and 'free -m'
Change-Id: I39327929f9b0b940fc12cdca1d744456fdc097e0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/23483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This fixes tianocore garbled framebuffer when 'x_resolution *
bits_per_pixel / 8' is not equal to 'bytes_per_line'.
This patch was also send to the edk2-devel mailing list:
https://lists.01.org/pipermail/edk2-devel/2018-January/020436.html
Tested on Thinkpad X220 with libgfxinit on 1366x768 display.
Change-Id: Ib9eaf692f86d416cd4ec3cc73a8b0aa0a28a38dd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Make is so that a different timer source can be provided instead
of TSC on x86 platforms.
BUG=b:72378235,b:72170796
Change-Id: I6faeecf7624a5aa4e1af8862036f1fbd2f54eb51
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In payloads/nvramcui/payload.sh line 5:
DIR=`dirname $0`
^-- SC2006: Use $(..) instead of deprecated `..`
^-- SC2086: Double quote to prevent globbing and word \
splitting.
In payloads/nvramcui/payload.sh line 6:
lpgcc -o $DIR/nvramcui.elf $DIR/nvramcui.c 2>&1 >/dev/null || exit 1
^-- SC2086: Double quote to prevent globbing and word \
splitting.
^-- SC2086: Double quote to prevent \
globbing and word splitting.
^-- SC2069: The order of \
of the 2>&1 and the \
redirect matters. The \
2>&1 has to be last.
Change-Id: Iceab2d0df49c642f54e6b911793aa1479f542644
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/23373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Updating from commit id f3bb31fee:
2017-09-08 (vboot: Support EC early firmware selection)
to commit 61cfcc3b:
2018-01-17 (meowth: Select CONFIG_DRIVER_BUS_SPI_INTEL_GSPI_VERSION_2)
This brings in 57 new commits.
Change-Id: Iadacc6017abbcc659e461d2fc27990ef8124871b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/23333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the tianocore payload on a Thinkpad X200 the filesize increased
by approximately 50% and the time to fetch and decompress the payload
increased by approximately %300 , so something is definitely wrong
with it and it shouldn't be used as the default compression method.
Change-Id: I9661c82750104d737596e7b3a8974324765938a5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the option to use the lz4 compression method
to compress payloads.
Also sets LZ4 as the default compression method.
Change-Id: Ic712f984f791d268440c8463eaea0d246aa31d99
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The MMIO address can change for different platforms
like Apollolake.
Change-Id: I6ec72d3a14f00212323a04e20d5a477dbc26b770
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add just enough code and boilerplate to keep it compatible with future
libflashrom.
Change-Id: If0d46fab141da525f8f115d3f6045a8c417569eb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The depthcharge .config only exists after depthcharge was built. Other
possible `PAYLOAD_CONFIG` files most probably miss a rule, too.
Change-Id: I8e6f79bb2bd07cbef1317f2623bbef9ca0e74880
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/22137
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support to read the SKU ID entry from the coreboot table
that was recently added in coreboot.
Change-Id: I1c3b375da6119a4f8e8e7e25a11644becb90f927
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22743
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch mirrors recent cleanups in coreboot regarding the strapping
ID entries in the coreboot table.
Change-Id: Ia5c3728daf2cb317f8e2bc72c6f1714d6cb4d080
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Using the stable version by default is consistent with
payloads/external/SeaBIOS.
Change-Id: I444ba2daaf5ecc5edde907a7842013f88e1c4c9b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This should make reproducible builds of coreboot with GRUB2 easier.
Change-Id: If855042945ab34f34c554e7490c811ec7b256980
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SeaBIOS 1.11.0 was released on November 10th, 2017. Changes include
* Initial support for NVME drives
* Support for vga emulation over a serial port in SeaBIOS (sercon)
* Support for serial debugging using MMIO based serial ports
* Support for scsi devices with multiple LUNs
* Support for boot-to-boot persistent coreboot cbmem logs
* Improved coreboot vga (cbvga) mode setting compatibility
* Several bug fixes and code cleanups
See also https://www.seabios.org/Releases#SeaBIOS_1.11.0 and for all
details on the changes, use
git log --oneline rel-1.10.3..rel-1.11.0
in the SeaBIOS repository.
Change-Id: Ie46a526593177c5241fbd979c7fa1934478f7382
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/22429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
SeaBIOS 1.10.3 was tagged on October 12th, 2017 with the following
changes.
```
$ git log --oneline rel-1.10.2..rel-1.10.3
b7661dd tcgbios: Fix use of unitialized variable
6055583 boot: Increase description size in boot menu
3551613 resume: Don't attempt to use generic reboot mechanisms on QEMU
```
Change-Id: I3a9ebf10a55118fc35aed688ea7ec794333c8227
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/22358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
bebitenc() just runs a downward loop over the same body as lebitenc().
That doesn't give you a byte-swapped result, it gives you the same final
value, just starting from the other side to fill it in. (Also, it
confused i++ and i--, so it really gives you a compiler error.)
The correct code needs to have the array index inverted relative to the
bit shift index to produce a big endian result.
Change-Id: I5c2da3a196334844ce23468bd0124bbe2f378c46
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When building the Go version of cbmem I found that
LB_TAG_MAC_ADDRS has the same value as LB_TAG_VERSION_TIMESTAMP.
I am guessing that this tag was little used. In any event, move it
forward to 0x33.
Change-Id: I038ad68e787e56903a2ed9cb530809a55821c313
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/22218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Since the git:// protocol is unencrypted and unauthenticated, there's a
security risk associated with using it: A man-in-the-middle attacker
could replace e.g. the master branch with malicious code.
Mitigate this risk somewhat by cloning GRUB2 via HTTPS.
Change-Id: Ice8f8d108e7dfa1a1ecd58d9735944fa9570ace8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Updating from commit id 3f3a496a 2017-09-01 09:20:19
(image_signing: Fix loem.ini pattern for unibuilds)
to commit id 753e34e9 2017-08-31 10:12:40
(futility: Make rwsig sign command produce EC_RW image)
This brings in 5 new commits.
This also updates Depthcharge stable commit ID.
Updating from a843f262 2016-08-16 08:41:04
(kahlee: select emmc boot first if available)
to commit id f3bb31fe 2017-08-15 17:15:33
(vboot: Support EC early firmware selection)
This brings in 14 new commits.
Change-Id: I17d034e87fa642c5e30e933eb98bcfe5ceaaa3a8
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Previously the random seed was fixed, which led to the same sequence of
blocks for each run.
Now that libpayload has time(), no change is needed in the function
rand_init() of tint.
Change-Id: I2e482bbb9d33cdbbf3c15916458329f99fbc4450
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/20980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Updating from commit id 5a086f5c - Tue Jul 11 23:57:30 2017:
(ps8751: enable software sync.)
to commit id a843f262 - Wed Aug 16 23:37:52 2017:
(kahlee: select emmc boot first if available)
This brings in 20 new commits.
This matches with the updated vboot submodule.
Change-Id: If030bc3e75dd470838590540880213bd841154b8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Elyes HAOUAS