Temporary MTRR setup usually covers the memory mapped flash. On recent
Intel hardware the mapping is not coherent. It uses an external window
for parts of the BIOS region that exceed 16M.
This now allows up to 10 temporary memory ranges.
TESTED: Qemu with multiple MTRR temporary MTRR ranges sets up a valid
and optimized temporary MTRR solution.
Change-Id: I23442bd2ab7602e4c5cbd37d187a31413cf27ecc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Updating from commit id 9ab0f0b:
sc7280: Update AOP firmware to version 379
to commit id e8efa5d:
sc7180/boot: Update qclib blobs binaries from 44 to 46
This brings in 7 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5f0a9075cde90991e927f3bfb75246bdb9877837
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
This CL adds the delay time into the RTD3 sequence, which will turn
off the eMMC controller (a true D3cold state) during the RTD3 sequence.
We checked power on sequence requires enable pin prior to reset pin
delay of 50ms and add delay of 20ms to meet the sequence on various
eMMC SKUs. Based on BH799BB_Preliminary_DS_R079_20201124.pdf in
chapter 7.2.
BUG=b:232327947
TEST=Build and suspend_stress_test -c 2500 pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I42cde5336f73a446cf5157e78f955fef8d70ae7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Increase frequency of sc7280 to 75 MHz. Setting the delay to 1/8 of
a cycle as a result of experimentation.
BUG=b:190231148
BRANCH=None
TEST=Make sure that herobrine board boots
HW Engineer measured SPI frequency and verified running at 75 MHz
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I3cf5a7c85f12800a11ece397a354349f2a0a235f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64673
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are configured by the TXE, so they do not need to be configured.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia1bf4e32aa156a0e1a74df2f62eb31cdadb376a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Use shorter macros to configure GPIOs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I91961658dca0902080576134e63e6d8a7c78d711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Disconnect GPIOs that are unused or not connected.
Also, update comments that are vague or have errors.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic83797b8a8e05eed99db0356f360a329f6fbf347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Add supported memory parts in mem_parts_used.txt, and generate SPD id
for this part.
K3LKLKL0EM-MGCN
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ie022dd95929549ddd403d4c1d1c52174fd3fd721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Samsung K3LKLKL0EM-MGCN will be used by the nissa variant craask. Add
it to the LP5 parts list and regenerate the SPDs using spd_gen.
BUG=b:229938024
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I5648f297130eaf8541d99b2db7777774a0b1d8fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Add 'detect' flag which can be attached to devices which may or may not
be present at runtime, and for which coreboot should probe the i2c bus
to confirm device presence prior to adding an entry for it in the SSDT.
This is useful for boards which may utilize touchpads/touchscreens from
multiple vendors, so that only the device(s) present are added to the
SSDT. This relieves the burden from the OS to detect/probe if a device
is actually present and allows the OS to trust the ACPI _STA value.
Change-Id: I1a4169ed6416d544773a37d29cdcc154d3c28519
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the I2C equivalent of an SMBus quick write to an I2C
device, which is used by some I2C drivers as a way to probe the
existence (or absence) of a certain device on the bus, based on
whether or not a 0-byte write to an I2C address is ACKed or NACKed.
i2c_dev_detect() is implemented using the existing i2c bus ops transfer()
function, so no further work is needed for existing controller drivers
to utilize this functionality.
Change-Id: I9b22bdc0343c846b235339f85d9f70b20f0f2bdd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
0-byte writes can be used as a way to probe/check presence of an i2c
device, so adjust _dw_i2c_transfer() to immediately set the STOP bit
and raise logger level for TX abort messages when the segment length
is zero. Adjust dw_i2c_transfer() to allow zero-segment-length
messages to be passed thru to _dw_i2c_transfer().
Tested as part of entire i2c-detect patch train.
Change-Id: I518e849f4c476c264a1464886b1853af66c0b29d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Select vbt bin files based on DB_DISPLAY field of FW_CONFIG.
BUG=b:233690293
TEST=emerge-brask coreboot
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Idb92be66927259732bfd27e4db2c9f242da7d200
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
In order to meet the OEM's acoustic specifications, the pre-wake
randomization time (DPA) is set to 100.
BUG=b:228410327
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Idaf3f931a2c0f2373445948e5f53a82328ec7ba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Future nissa devices will mostly use 16MB SPI flash. Add 16MB layout and
make it default for nissa.
BUG=b:202783191
TEST=build nissa and brya firmware, check they're still 32MB
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I04ae46d62d3e018610ca2533c186dda980bd67bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
- Remove deprecated "MAINTAINER" lines
- Add Sphinx tools to coreboot-jenkins-node to check documentation.
- Add mdl to check markdown
- Alphabetize packages in docs Dockerfile
- Add jinja2 version 3.0.3 to the docs Dockerfile - The latest version
breaks with the error:
"exception: cannot import name 'contextfunction' from 'jinja2'"
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia1de62621a6aef4ecd055a1a3afbebad34448002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
In preparation to follow-up commits, rename the mainboard folder from
t440p to haswell, which will have more variants later.
Change-Id: I4a9d68d54d5f0821bbf85faaa620855d456c97f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
PERST_0 is not used, so set this to GPIO_PRT0_UDEF (undefined) to
ensure that an undefined address is not added to GNVS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac9b116b2fa28824a89db28911188364dc9a1a53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Currently, the log message contains an unwanted trailing space, so
remove it.
[ERROR] Null dereference at eip: 0x3ffad01a
Change-Id: I64509ca4bad94c7db4279cc4c1e6fee2bba2e035
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
There is NULL dereference in adjust_apic_id_map() and updating
apic_id_to_cpu[] array within SMM stub fails.
Initial apic_id_to_cpu[] array may have worked for platforms
where APIC IDs are consecutive.
Change-Id: Ie59a731bfc883f8a47048b2ceacc66f44aa5b68c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- Spelling fix
- Add languages
- Update formatting
- Move notes that shouldn't be in the description file to a README
Change-Id: I4af37327d5834f8546a3f967585658fb5686f17a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I9940ad2e963458e4bc50c2a2957bb72cbd4109be
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I8ef0e67a8f26b98acea777afb26ed221bfa90153
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
To support speaker AMP CS35L53-CWZR'S I2C needs to split to two
I2C ports
BUG=b:207333035
BRANCH=none
TEST=built and verified speaker
Signed-off-by: Eddy Lu <eddylu@ami.corp-partner.google.com>
Change-Id: I8095abc4fc3233b21b818a508c84cd59b39fc1d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Add notes for significant changes to payloads, such as new payloads and
version updates.
Change-Id: I607d732beee07396a8002e5e504375d9dc4d7eda
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64752
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit bd9cec8ae5.
Reason for revert: Enable i2c7 for amp changing to 2 channel
because vell setting amp on i2c0 and i2c7 on next phase
BUG=b:229334701
TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend
&& checks EC log and ensures the DUT could enter s0ix.
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Change-Id: I5988cd9926b2c9ced1d111774abaa897bef91537
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
There shouldn't be any significant changes in meaning.
- Fix formatting issues
- Reword some text
Change-Id: I4e37605ef2371e6c4affbe6cb6c67e0875e89a1f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The description.md file for the intelp2m utility wasn't the description
that was needed - just a subject, and what language it was written in.
It was instead a set of more full documentation, so move it into the
Documentation directory and create a new description file.
Change-Id: Ia180ae41f91f8b8eb408351a9e44e899edc031d3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This fixes the following warnings:
mainboard/starlabs/common/flashing.md::
WARNING: image file not readable:
- mainboard/starlabs/common/fwupdVersion.png
- mainboard/starlabs/common/BiosLock.jpg
- mainboard/starlabs/common/SwitchBranch.png
cbfstool/index.md::
WARNING: document isn't included in any toctree
internals/devicetree_keywords.md::
WARNING: document isn't included in any toctree
mainboard/asus/wifigo_v1.md::
WARNING: document isn't included in any toctree
mainboard/google/index.md::
WARNING: document isn't included in any toctree
mainboard/starlabs/common/flashing.md::
WARNING: document isn't included in any toctree
releases/boards_supported_on_branches.md::
WARNING: document isn't included in any toctree
WARNING: None:any reference target not found:
- releases/coreboot-4.16-relnotes
- releases/coreboot-4.15-relnotes
- releases/coreboot-4.14-relnotes
- releases/coreboot-4.13-relnotes
- releases/coreboot-4.12-relnotes
- releases/coreboot-4.11-relnotes
- releases/coreboot-4.10-relnotes
- releases/coreboot-4.9-relnotes
- releases/coreboot-4.8.1-relnotes
- releases/coreboot-4.7-relnotes
- releases/coreboot-4.6-relnotes
- releases/coreboot-4.5-relnotes
- releases/coreboot-4.4-relnotes
- releases/coreboot-4.3-relnotes
- releases/coreboot-4.2-relnotes
- releases/coreboot-4.1-relnotes
- ../../src/soc/intel/common/block/cse/cse.c
Change-Id: I22273bc1bc34b6297cef4e594c454c2316d4215a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Kinox has four temperature sensors. Modify the target of DPTF active
policy to map correct temperature sensor.
BUG=b:231380286
TEST=Boot to Chrome OS and doesn't see "DPTF: Invalid sensor ID" from ec
comsole.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Icb5c285a6f483e2a1b6510a962ff7f7f6e9a79e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reduce difference with linux v5.18.
Change-Id: Id9412f7b6c0b9f76b39a094142aaded5c2aa1059
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
This reduce difference with linux v5.18.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I817630321587dec515cd94aa7b73a17819526190
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
This reduce difference with linux v5.18.
Change-Id: I1fc71b9cb6a4e4f8b27fbe6d45f4fa4e2c236157
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Arthur Heymans