After the RTC coin cell has been replaced, the Update Cycle Inhibit
bit must see at least one low transition to ensure the RTC counts.
The reset value for this bit is undefined. Examples have been observed
where batteries are installed on a manufacturing line, the bit's state
comes up low, but the RTC does not count.
Change-Id: I05f61efdf941297fa9ec90136124b0c8fe0639c6
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17370
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
While the real-time clock updates its count, values may not be correctly
read or written. On reads, ensure the UIP bit is clear which guarantees
a minimum of 244 microseconds exists before the update begins. Writes
already avoid the problem by disabling the RTC count via the SET bit.
Change-Id: I39e34493113015d32582f1c280fafa9e97f43a40
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17369
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points.
CPU passive point:100, critical point:105
TSR1 passive point:48, critial point:65
TSR2 passive point:85, critial point:100
2. Update PL1/PL2 Min Power Limit/Max Power Limit
Set PL1 min to 3W, and max to 6W
Set PL2 min and max to 8W
3. Change thermal relationship table (TRT) setting.
The TRT of TCHG is TSR1, but real sensor is TSR2.
BRANCH=master
BUG=none
TEST= Compiled, verified by thermal team.
Change-Id: Ib197c36eca88e3d05f632025cf3c238e1a2eae23
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/17426
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The following devices i2c6, i2c7, spi1, spi2, uart3
are not used.
BUG=chrome-os-partner:59880
TEST=Boot to OS and lspci command should
not list the above disabled devices.
Change-Id: I819cdb34709703e6431b49446417ed9d6b3543cd
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/17441
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Provide the rise and fall times for the i2c buses and let the
library perform the necessary calculations for the i2c
controller registers instead of manually tuning the values.
BUG=chrome-os-partner:58889,chrome-os-partner:59565
Change-Id: I0c84658471d90309cdbb850e3128ae01780633af
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17397
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
This changes memory to only do CA training with one pattern,
0xfffff/0x00000 and to also make sure CA training waits for all of the
captures during training.
BRANCH=none
BUG=chrome-os-partner:56940
TEST=boot kevin and run
stressapptest -M 1500 -s 1000
Change-Id: I0982674b4f4415f4d7865923ced93fa09bdd877e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 75cdd911cea9c4e5744fd04505b260fa5755513c
Original-Change-Id: I3b86e6d4662c6fbbf9ddef274fce191a367904e5
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/410320
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/17383
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds a new CA training pattern for all of the supported
frequencies. This pattern increases the hold time on CA.
BRANCH=none
BUG=chrome-os-partner:57845
TEST=boot kevin and run:
while true; do sleep 0.1; memtester 500K 1 > /dev/null; done
for several hours
Change-Id: Ie5958cf67c16247ef90ee261da9faef4ffa5b339
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8babeafe75bffcb2dab17eb007b4f5bb0eb42606
Original-Change-Id: I7f7652f88e43dc9b2f6069e60514931bf7582ed1
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/403547
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/17382
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add support for following 3 modules.
- Micro MT52L256M32D1PF / MT52L512M32D2PF
- Hynix H9CCNNNBJTALAR
Hana EVT was planed to add 4 DRAM modules but RAM_CODE=5 is not used
in the end.
This patch also unifies the naming of the RAM configurations.
BUG=chrome-os-partner:58983
TEST=verified on Hana EVT.
Change-Id: I7dd44525de8e9dde01f210f4730fa8ccd4baef21
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5dccd68149bcfd6fd0a83e310d43063bab645691
Original-Change-Id: I7c245c8c24be159e152f4f3cca25bf970b58425c
Original-Signed-off-by: Milton Chiang <milton.chiang@mediatek.com>
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/402888
Original-Reviewed-by: Pin-Huan Hsu <ph.hsu@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Paris Yeh <pyeh@chromium.org>
Reviewed-on: https://review.coreboot.org/17381
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
coreboot's build system picks up the BL31 image as an ELF from the ARM
Trusted Firmware submodule and inserts it into CBFS. However, the
generic 'bl31' build target we run in the ARM Trusted Firmware build
system also generates a raw bl31.bin binary file.
We don't need that binary, and with the recently added support for
multiple non-contiguous program segments in BL31 it can grow close to
4GB in size (by having one section mapped near the start and one near
the end of the address space). To avoid clogging up people's hard drives
with 4GB of zeroes, let's only build the target we actually need.
BRANCH=gru
BUG=chrome-os-partner:56314,chromium:661124
TEST=FEATURES=noclean emerge-kevin coreboot, confirm that there's no
giant build/3rdparty/arm-trusted-firmware/bl31.bin file left in the
build artifacts, and that we still generate .d prerequisite files.
Change-Id: I8e7bd50632f7831cc7b8bec69025822aec5bad27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31699820f4c36fd441a3e7271871af4e1474129f
Original-Change-Id: Iaa073ec11dabed7265620d370fcd01ea8c0c2056
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/407110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17380
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This changes the 933 DPLL rate to 928 which has low jitter.
BRANCH=none
BUG=chrome-os-partner:57845
TEST=boot kevin and run
while true; do sleep 0.1; memtester 500K 1 > /dev/null; done
for several hours
Change-Id: I4d2a8871aaabe3b0a1a165c788af265c5f9e892c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54ebf8763bb8193c4b36a5e86f0c625b176d31a6
Original-Change-Id: Iaa12bf67527b6d0e809657c513b8d1c66af25174
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/404550
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17379
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Kevin project has been too smooth and boring for our tastes in the
last last few weeks, so we've decided to stir the pot a little bit and
reshuffle all our PLL settings at the last minute. The new settings
match exactly what the Linux kernel expects on boot, so it doesn't need
to reinitialize anything and risk a glitch.
Naturally, changing PLL rates will affect child clocks, so this patch
changes vop_aclk (192MHz -> 200MHz, 400MHz in the kernel), pmu_pclk
(99MHz -> 96.57MHz) and i2c0_src (198MHz -> 338MHz, leading to an
effective I2C0 change 399193Hz -> 398584Hz).
BRANCH=gru
BUG=chrome-os-partner:59139
TEST=Booted Kevin, sanity checking display and beep. Instrumented
rockchip_rk3399_pll_set_params() in the kernel and confirmed that GPLL,
PPLL and CPLL do not get reinitialized anymore (with additional kernel
patch to ignore frac divider when it's not used). Also confirmed that
/sys/kernel/debug/clk_summary now shows pclk_pmu_src 96571429 because
the kernel doesn't even bother to reinitialize the divisor.
Change-Id: Ib44d872a7b7f177fb2e60ccc6992f888835365eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9b82056037be5a5aebf146784ffb246780013c96
Original-Change-Id: Ie112104035b01166217a8c5b5586972b4d7ca6ec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/405785
Original-Commit-Ready: Xing Zheng <zhengxing@rock-chips.com>
Original-Tested-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Reviewed-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/17378
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Previously, the .success file for each target didn't save the version,
of the package that was built. This created problems when someone
wanted to update to a new version and could not rebuild.
Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17417
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The DDR speed Kconfig symbols needed to either be added to the Kconfig
tree, or have the code associated with them removed. I chose to add
the symbols.
- Add symbols for DDR333 - DDR667 to cygnus Kconfig. These should be
selected by the mainboard.
- Rename symbols from DDRXXX to CYGNUS_DDRXXX to match the existing
CYGNUS_DDR800 symbol.
- Rename the non Kconfig #define CONFIG_DRAM_FREQ to CYGNUS_DRAM_FREQ
because having other #defines look like Kconfig symbols is confusing.
- Change #ifdef CONFIG_DDRXXX to use IS_ENABLED
Change-Id: I3f5957a595072434c21af0002d57ac49b48b1e43
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
The environment-controller entity is shared by many ITE super-i/o
chips. There are some differences between the chips, though. To cover
that, the super-i/o chip should select Kconfig options of this driver
accordingly.
The current implementation isn't exhaustive: It covers only those
parts that are connected on boards I could test, plus those that are
currently used by the IT8772F. The latter could be ported to use this
driver if somebody minds to test it.
Change-Id: I7a40f677f667d103ce1d09a3e468915729067803
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17284
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In function definition of acpigen_write_byte_buffer, buffer size written
using acpigen_emit_byte gives wrong results in generated AML code for
buffer size greater than one.
Write buffer size using acpigen_write_integer as per ACPI spec 5.0
section 20.2.5.4 BufferOp.
Change-Id: I0dcb25b24a1b4b592ad820c95f7c2df67a016594
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17444
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
According to PCI LOCAL BUS SPECIFICATION, REV. 3.0 page 305,
the sub-class for Entertainment en/decryption is 0x1010
Change-Id: Ia069e2ec328a8180fc1e2e70146c3710e703ee59
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17436
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Before the PcdeMMCBootMode in the Updatable Product Date was always
assigned and didn't take into account the + 1 increment for the default
define.
Now if the configuration indicates that the device tree should be
followed PcdeMMCBootMode is initially disabled. Else if configuration
isn't the default, assign the value with the + 1 increment substracted.
TEST=Intel/MinnowMax
Change-Id: I6755eb585d1afe3a15f83347fba834766eb44ad2
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: https://review.coreboot.org/10165
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Log the values of PcdEnableLpe and PcdeMMCBootMode even if they are
outside of the expected range.
TEST=Intel/MinnowMax
Change-Id: Ie0aea4287234b23d4e9852f3991dcc78ce8103d9
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: https://review.coreboot.org/10164
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reef board uses GPIO_17 as DMIC config pin.
This pin distinguishes board with Quad DMIC's or Mono DMIC.
This patch adds necessary DMIC endpoints to support either of
those configurations.
CQ-DEPEND=CL:*304339,CL:409774
BUG=chrome-os-partner:56918
BRANCH=none
TEST=Verify Mono and Quad Channel DMIC record
Change-Id: I5b2825b5f39f8962985a129f8ec65265fb18f0b2
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/17158
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
GPIO register at offset 0xfc (VID Input Register) is read-only but
writing 1 to bit 0 will update initial VID input.
Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17412
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the DIMM SPD data for memory types that are not used yet
but are on the matrix and may be used in future builds.
Also fix a typo in the part number string for one type.
BUG=chrome-os-partner:58666
TEST=build and boot on eve p0
Change-Id: I20401d7afb69f1c3ae1a3b0d6e3ec9097f54ef96
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17437
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently the code considers the absence of the NVRAM firmware
rollback space a a trigger for invoking the TPM factory initialization
sequence.
Note that the kernel rollback and MRC cache hash spaces are created
after the firmware rollback space. This opens an ever so narrow window
of opportunity for bricking the device, in case a startup is
interrupted after firmware space has been created, but before kernel
and MRC hash spaces are created.
The suggested solution is to create the firmware space last, and to
allow for kernel and MRC cache spaces to exist during TPM factory
initialization.
BRANCH=none
BUG=chrome-os-partner:59654
TEST=odified the code not to create the firmware space, wiped out the
TPM NVRAM and booted the device. Observed it create kernel and
MRC cache spaces on the first run, and then reporting return code
0x14c for already existing spaces on the following restarts.
Verified that the device boots fine in normal and recovery modes
and TPM NVRAM spaces are writeable in recovery mode.
Change-Id: Id0e772448d6af1340e800ec3b78ec67913aa6289
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/17398
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Currently the tlcl_define_space() function returns the same error
value for any non-zero TPM response code. The thing is that the caller
might want to allow attempts to re-create existing NVRAM spaces. This
patch adds a new API return value to indicate this condition and uses
it as appropriate.
BRANCH=none
BUG=chrome-os-partner:59654
TEST=for test purposes modified the code not to create the firmware
space, wiped out the TPM NVRAM and booted the device. Observed it
create kernel and MRC index spaces on the first boot and then
reporting return code 0x14c for already existing spaces on the
following restarts.
Change-Id: Ic183eb45e73edfbccf11cc19fd2f64f64274bfb2
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/17422
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
acpigen_write_if_lequal is used to generate ACPI code to check if two
operands are equal, where operand1 is an ACPI op and operand2 is an
integer. Update name of function to reflect this and fix code to write
integer instead of emitting byte for operand2.
TEST=Verified by disassembling SSDT on reef that ACPI code generated for
If with operand2 greater than 1 is correct.
If ((Local1 == 0x02))
{
Return (0x01)
}
Else
{
Return (Buffer (One)
{
0x00 /* . */
})
}
Change-Id: If643c078b06d4e2e5a084b51c458dd612d565acc
Reported-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17421
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit 83df672d2c.
It's based on the assumption that the H8 keeps its configuration
during a suspend/resume cycle. User reports indicate that this might
not be true.
Caching the settings in a cbtable entry might be a better approach.
Change-Id: Ic4ba862ee7068ffe214c2aeaadecb4390a0e0529
Reviewed-on: https://review.coreboot.org/17411
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
BIOS needs to ensure that SPI write does not cross 256-byte
boundary. Else, if the write is across 256-byte boundary, then it
corrupts the block by wrapping write to start of current block. Thus,
ensure nuclear_spi_{read,write} operate within a single 256-byte block
only at a time.
BUG=chrome-os-partner:59813
BRANCH=None
TEST=Verified that elog writes do not corrupt the event log when write
is across 256-byte blocks.
Change-Id: I854ca2979d65b9f1232f93182cb84d4dee4f4139
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Replace the use of the old device_t definition inside
northbridge/via/vx800.
Change-Id: I14a2b4d847f8aeb327d90f385dea998779fae24f
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17316
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
northbridge/via/cx700.
Change-Id: I6e25f898ab55ee959f1b3b8aba9616c3ba18986d
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17315
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
northbridge/intel/i855.
Change-Id: Iae66d1ef838095a560868d9c9ff81f4208f814f1
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17314
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
northbridge/amd/agesa/family10.
Change-Id: I5723e217fc739ab576cbe3a1ee6d92023190267c
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17313
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
mainboard/via/vt8454c.
Change-Id: I94e22e1d814733c4049e78e5b3c23b9bb429f6fa
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17312
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
mainboard/via/epia-m700.
Change-Id: I7a16a9f396d50279cf2bd13de72bd78e8f53f7d8
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17311
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
mainboard/via/epia-cn.
Change-Id: I1b05abcedc427e4876e1fdab85298015308a3d17
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17310
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
mainboard/tyan/s8226.
Change-Id: I41729fc03518a7804ae224c773967453a7ab60a7
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17309
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Move members of struct edid to struct edid_mode
- Change `u32 pmmio` to `u8 *pmmio` in i915_lightup_sandy
Change-Id: Id64daf5eae1d4d8265105067b2e6ae55786a5638
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/17332
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is more consistent with other Intel GMCH code.
Change-Id: I7bfaa79b9031e2dcc5879a607cadacbdd22ebde7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17405
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
The TPM spaces created by the RO need to have different attributes
depending on the space's use. The firmware rollback counter and MRC
hash spaces are created by the RO code and need to be protected at the
highest level: it should be impossible to delete or modify the space
once the RO exits, and it is how it is done before this patch.
The rest of the spaces should be possible to modify or recreate even
after the RO exits. Let's use different set of NVRAM space attributes
to achieve that, and set the 'pcr0 unchanged' policy only for the
firmware counter and MRC cache spaces.
The definitions of the attributes can be found in "Trusted Platform
Module Library Part 2: Structures", Revision 01.16, section "13.2
TPMA_NV (NV Index Attributes)."
CQ-DEPEND=CL:410127
BRANCH=none
BUG=chrome-os-partner:59651
TEST=verified that the reef system boots fine in both normal and
recovery modes; using tpmc confirmed that firmware, kernel and
MRC cache NVRAM spaces are readable in both and writeable only in
recovery mode.
Change-Id: I1a1d2459f56ec929c9a92b39175888b8d1bcda55
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/17388
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
The Kconfig symbol CONSOLE_SERIAL_TEGRA210_UART_CHOICES was attached to
a choice, and isn't used anywhere. Remove it as unnecessary.
Change-Id: I4efd2e43ac34b266db0d40d1bc8c123bd377b3a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds punit initialization code after
FspMemoryInit so that turbo can be initialized after
that.
BUG=chrome-os-partner:58158
BRANCH=None
Change-Id: I4939da47da82b9a728cf1b5cf6d5ec54b4f5b31d
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/17203
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To avoid garbage display in firmware on warm reset, we need
to enable eDP display in depthcharge instead when the framebuffer is
cleared.
Therefore limit edp_enable() in coreboot to just configure eDP,
and leave enabling the display to depthcharge.
CQ-DEPEND=CL:402071
BUG=chrome-os-partner:58675
BRANCH=none
TEST=Boot from kevin, and display work
Change-Id: I9d937ead33ebba58e33e02fd73b80d6e11bb69aa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38b0d18c3fae37dfccb18fe809f763b98703167c
Original-Change-Id: Ibbc283a5892b98f4922f02fd67465fe2e1d01b71
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/402095
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17207
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Marshall Dawson