In some cases it may be useful to be able to bitbang a UART, such as
during early bring-up when a driver for the actual controller isn't
available yet. On some platforms we may even want to use this
permanently, such as on the SDM845 where the hardware UART controller
needs to have firmware loaded and is thus unavailable for most of the
bootblock.
This patch adds some helper code that makes it easy to implement this on
a platform, you just have to pass it a function to control the Tx pin
state and it will do the rest. It relies on the mono_time API and is
thus bound to microsecond timing granularity, but that seems to be
barely good enough for 115200 baud if the bit times are calculated
carefully.
Change-Id: If7dcecc7b8a95ec15f456efd2ec1f1e0dde239b4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25812
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The rationale is to allow the mainboard to override the default
baudrate for instance by sampling GPIOs at boot.
A new configuration option is available for mainboards to select
this behaviour. It will then have to define the function
get_uart_baudrate to return the computed baudrate.
Change-Id: I970ee788bf90b9e1a8c6ccdc5eee8029d9af0ecc
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/23713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fix the following warning detected by checkpatch.pl:
WARNING: line over 80 characters
Changed a few comments to reduce line length. File
src/include/cpu/amd/vr.h was skipped.
TEST=Build and run on Galileo Gen2
Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18687
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Fix the following warning detected by checkpatch.pl:
WARNING: please, no space before tabs
TEST=Build and run on Galileo Gen2
Change-Id: If60a58021d595289722d1d6064bea37b0b0bc039
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18652
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix the following error found by checkpatch.pl:
ERROR: Macros with complex values should be enclosed in parentheses
False positives are detected for attribute macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define BOOT_STATE_INIT_ATTR __attribute__ ((used, section
(".bs_init")))
False positive also generated for macros for linker script files. An
example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define CBFS_CACHE(addr, size) \
+ REGION(cbfs_cache, addr, size, 4) \
+ ALIAS_REGION(cbfs_cache, preram_cbfs_cache) \
+ ALIAS_REGION(cbfs_cache, postram_cbfs_cache)
False positives generated for assembly code macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define DECLARE_OPTIONAL_REGION(name) asm (".weak _" #name ", _e" #name
)
False positive detected when macro includes multiple comma separated
values. The following code is from src/include/device/azalia_device.h:
#define AZALIA_SUBVENDOR(codec, val) \
(((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)), \
(((codec) << 28) | (0x01721 << 8) | (((val) >> 8) & 0xff)), \
(((codec) << 28) | (0x01722 << 8) | (((val) >> 16) & 0xff)), \
(((codec) << 28) | (0x01723 << 8) | (((val) >> 24) & 0xff))
TEST=Build and run on Galileo Gen2
Change-Id: I6e3b6950738e6906851a172ba3a22e3d5af1e35d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18649
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the UART drivers for the postcar stage.
TEST=Build and run on Galileo Gen2
Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15843
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Allow the platform to override the input clock divider by adding the
uart_input_clock_divider routine. This routine combines the baud-rate
oversample divider with any other input clock divider. The default
routine returns 16 which is the standard baud-rate oversampling value.
A platform may override this default "weak" routine by providing a new
routine and selecting UART_OVERRIDE_INPUT_CLOCK_DIVIDER. This works
around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Ieb6453b045d84702b8f730988d0fed9f253f63e2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
verstage previously lacked serial console support.
Add the necessary objects and macro checks to allow
verstage to include the serial console.
Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
We had lots of casts that caused warnings when compiling on RISCV.
Clean them up.
Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7066
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Connection of UARTs to GDB stub got lost in the console transition
process, bring it back. In theory, GDB stub should work also over
usbdebug, but that solution is not really tested at all yet.
Change-Id: I90e05e8132889e788b92e055ee191f35add43bbc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5343
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The port for console remains to be a compile time constant.
The Kconfig option is changed to select an UART port with index
to avoid putting map of UART base addresses in Kconfigs.
With this change it is possible to have other than debug console
on different UART port.
Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5342
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Consoles on CBMEM and USB have somewhat complex rules and dependencies
when they can be active. Use simple variables to test which stage
of boot is being built for each console.
Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This framework was only available in ramstage. So we had to define
console output functions separately for bootblock, romstage and SMM.
Follow-up patches will re-enable all the consoles removed here,
in a more flexible fashion, and with less lines-of-code and copy-paste.
Also the driver list is not in a well-defined order and some of the
loops could exit without visiting all drivers.
NOTE: This build has no console in ramstage.
Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5337
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
None of the PCI bridge management here is specific to the PCI UART
device/function. Also the Kconfig variable defaults are not globally
valid, fill samsung/lumpy with working values.
Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5237
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Also fixes the reported baudrate to take get_option() into account.
Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5310
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Prepare low-level register access to take UART base address as a
parameter. This is done to support a list of base addresses defined
in the platform.
Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5309
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
UARTs now have unified prototypes and can use a single entry
in the list of drivers for ramstage.
Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5308
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
NOTE: UART base for SMM continues to be broken, as it does not use
the address resource allocator has assigned.
Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5235
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do not pull in console hw-specific prototypes everywhere
with console.h as those are not needed for higher levels.
Move prototypes for UARTs next to other consoles.
Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5232
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Julius Werner