1. Enable Cnvi BT Audio Offload feature and also
configure the virtual GPIO for CNVi Bluetooth I2S pads.
2. According to the SOC_GPIO_Table_20230116,
Change GPIO GPP_D15, GPP_D16 to NC.
BUG=b:264834572
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I4901c8cd660f2d47018e4cccdb67f666f0800423
Signed-off-by: Jamie chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72035
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
This variant was added without a devicetree, so add the board
specific devicetree according to schematic_20230110.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: Ie05c152a20953e3e2d5f4ba5f9c00160a3e418e1
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
NVMe PCIe 9-12 using clk_src1 and clk_req2 mapping to hardware design,
Due to inconsistency between PMC firmware and FSP, we need to set
clk_src to clk_req number, not same as hardware mapping in coreboot.
Then swap correct setting to clk_src=1,clk_req=2 in mFIT.
BUG=b:265720813
TEST=build firmware and veirfy suspend function on DUT.
Cq-Depend: chrome-internal:5351299
Change-Id: Ia057dfa98cb9293d9e212edb4e4ac198e94e8985
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72051
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turn off camera power during S0ix to improve power consumption.
BUG=b:265754302
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ie2b300783adfc1cab30bc897d086a3674436724a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz starting the board version of the current phase.
BUG=b:260127676
TEST=Build and boot to OS in Frostflow with 100 MHz SPI bus speed.
Observe that the boot time improved by 100 ms compared to 66 MHz SPI
flash bus speed.
firmware log:
SPI fast read speed: 100 MHz
At 66 MHz:
Total Time: 1,563,384
At 100 MHz:
Total Time: 1,462,570
Change-Id: I9435f4ad0d3541b040703dc9a453badbd080dc09
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Fix:
cc1: error: src/vendorcode/amd/pi/00670F00: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/binaryPI: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Include: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Common: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU/Family: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch/Common: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I745f4fc421c91c413fe0d3155d3494ed9704eeb6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This allows the user to pass one or more arguments through the testsoc
script to abuild.
Example:
testsoc -K SOC_AMD_CEZANNE -a "--skip_unset BOARD_GOOGLE_NIPPERKIN"
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic2bc8d656022560ed1eebf6eee0512d3633ebe84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72766
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Not exactly sure about the usb4_xhci controllers, but for now I assume
those will behave like any other XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22384f58e245a1486793831d29d22e9c618f646c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The PCI Device ID Assignments table from PPRs #57019 Rev 1.65 and
PPR #57396 Rev 1.54 were used as a reference. Some devices will need to
have ops added in future patches. Since the xhci_2 device isn't there
any more, also drop it from the mainboard devicetrees. The actual USB
port configuration on xhci_0 and xhci_1 is updated in the next patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49721bc44fa1e2a0118a8c3ac79a36aee64be687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Now that the PCIe ports on device 1 are added, rename the aliases for
the PCIe ports on device 2 to have a common naming scheme. For phoenix
the device alias names are based on the device and function number the
bridge is connected to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f5698408019bb9222b599dd78540ca1b187b56d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72737
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only the PCIe ports on the functions of device 2 were present in the
devicetree and had the amd_external_pcie_gpp_ops ops assigned. Add the
missing PCIe ports on the functions of device 1 and assign the
amd_external_pcie_gpp_ops ops to them.
This SoC uses a slightly different naming scheme for its PCIe GPP ports.
Previously the PCIe GPP bridge number from the PCI Device ID Assignments
table from the PPR was used. Those bridge numbers are one less than the
function numbers of the device. This is due to function 0 being a dummy
bridge to avoid having to shuffle around the function numbers when the
first bridge is unused, since the PCIe specification mandates the
function 0 to be implemented if any other function on the same device is
implemented. In order for the device aliases to be consistent with the
PCIe device and function numbers which is way more commonly used and
also what lspci shows and what goes into the DXIO descriptors, change
the naming scheme of the aliases.
This was checked with PPR #57019 Rev 1.65 and PPR #57396 Rev 1.54.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib5c62c1df585877d9b6986a462a3636d4f2eb4c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72736
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This enables L1.2 for the SSD port.
link_hotplug is unused on Mendocino, so remove it while I'm here, just
as code cleanup. This has no functional difference.
Enabling L1.2 on other devices currently causes problems. Debug is
ongoing.
BUG=b:265890321
TEST=Build & boot, look at states enabled in lspci. Test device
functionality.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8940856a127c8a4ba45148cbbf07a08b621beb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch requests FSP to enable the MRC fast boot feature along
with FSP v2473.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4a621e55c853505f7a702181ae5a70dc56d5b5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72745
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch drops the WFC sensor OV8856 (reused from the Brya chassis)
support for Rex and added support for Rex specific UFC sensor OV13B10.
BUG=b:267264348
TEST=WFC MIPI cameras have been enabled using google/rex Proto 1.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic785b82db4368f40d91921f29c218cf417938541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70226
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Enabling `SaGv` along with FSP v2473 is causing blank display issue.
Mostly likely we shouldn't enable SaGv yet on Intel MeteorLake.
BUG=b:267446159
TEST=Able to see ChromeOS UI in consecutive boot.
This reverts commit cbca81c594.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifbcc36515f7550c183c40e5af94684f5c3e39a7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72774
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit b171f76812 ("soc/amd/*: Hook up GPP bridges ops to devicetree")
missed adding the amd_external_pcie_gpp_ops ops to the gpp_gfx_bridge
PCIe ports, so add them. Those devices were previously covered by the
PCI_DID_AMD_FAM17H_MODEL60H_PCIE_GPP_D1 PCI device ID in the list that
got removed in the referenced commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55434bf486569b32901b3840193a09cc5955abb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This switches the Picasso SoC to use the common reset code.
Picasso supports warm resets, so set the SOC_AMD_SUPPORTS_WARM_RESET
flag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I52515b20ef6c70b137f176d95480757b16bd8735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72755
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This switches the Phoenix & Glinda SoCs to use the common reset code.
Cezanne and newer do not support warm reset, so use cold resets in all
cases (including the OS).
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4593fa9766ac9e988722a02e355c971e147b8fae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72754
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This switches the Cezanne & Mendocino SoCs to use the common reset code.
This patch does not change any behavior on those chips.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie05c790573e4e68f3ec91bacffcc7d7efb986d79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72659
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows us to use the same file for PCO, CZN, MDN, PHX, & Glinda.
PCO supports the warm reset, and future chips can support it by setting
the SOC_AMD_SUPPORTS_WARM_RESET option.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib6459e7ab82aacbe57b4c2fc5bbb3759dc5266f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72658
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On family 15h and 16h processors with PSP, the PSP firmware type 0x5f
corresponds to AMD_FW_PSP_SMUSCS, while on family 17h and 19h this
corresponds to AMD_FW_TPMLITE. Add comments to those two enum values to
clarify this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c125ec6a0eb548f58a457f9040278391d2101c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
No BS_ON_EXIT hooks are run on BS_PAYLOAD_BOOT or BS_OS_RESUME, so don't
allow these hooks.
Change-Id: I318165f0bd510aed3138d3612dd3e264901aba96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
No bootstate hook is called on exit of BS_OS_RESUME or BS_PAYLOAD_BOOT.
Change-Id: I2b5b834d0663616a9523fd119f007e3bac8e7bf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:266696987
BRANCH=None
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I9b50ab3c0bcef192ef89f173852cda222f1533c7
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Enable the HPD GPIO so that the USB-C port can be used for
DisplayPort.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If93d08f64cf7b09bb47622bdc7f22280b8a48174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72431
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the PHX, it uses subprog 0.
For the PHX2, it uses subprog 1.
Change-Id: Ib013f264fc9940ad95e559fe19bba72c06a19625
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch enables CNVi_BT Core and Wifi for mtlrvp based on mtlrvp
schematics.
1. Enable CNVi BT Core in device tree
2. Enable CNVi Wifi (pci 14.3) device in device tree
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS.
CNVi Mode = 1
Wi-Fi Core = 1
BT Core = 1
BT Audio Offload = 0
BT Interface = 1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I22575bf31b540f9dc1149a2766268285001b72f4
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib96fcb86fd2c3fe16f23c8f038f4930a832a5b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The patch disables Tccold Handshake to prevent possible display
flicker issue for skolas board. Please refer to Intel doc#723158
for more information.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS on Skolas, verify upd setting.
Change-Id: Ic184a61c27abd729667cd181d8f9954f58b67856
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68636
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit provides a dev tree setting for partners to enable/disable
TccoldHandshake for the sighting in doc:723158
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=compile ok and FSP UPD is config properly
Change-Id: Ica13b98204acebef7f0b9a4411b4ac19f53cad6e
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68635
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Expose DisableDynamicTccoldHandshake in header so that
coreboot can disable it.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS, check UPD value in debug FSP build.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I0d953f37a2f0dac58fd339e3fe0dc847d5e6d892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72693
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some reserved address range listed in Alder Lake Platform Firmware
Architecture Specification document 626540 section 6.4 ADL - System
Memory Map such as North TraceHub ranges were missing. Details about
North TraceHub (aka. Intel TraceHub) can be found in Intel Trace
Hub (Intel TH) Developer's Manual document 671536.
BUG=b:264648959
TEST=Compilation successful
Change-Id: I14803a7297c8c5edefe564d92bfe7314f6769942
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch adds the {MCH:a706, TDP:28W} missing 28W configuration.
BUG=b:267666609
BRANCH=firmware-brya-14505.B
TEST=Power Limit are properly set on skolas 28W
Change-Id: Ice35d622eeec5799c53de086430d00dc8789097e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The testsoc script was pulling in odd results when the -K option matched
options in sources, Makefiles, and device trees. Adding another grep to
limit the list to just Kconfig matches ensures that only actual
mainboards are built.
TEST="./util/testsoc -K PICASSO" no longer tries to build mainboard "0"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3860df4520a5594fb9c1a06e75487520b7d5d275
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72655
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Removed workaround since the latest schematics fixed.
Power Sequencing of ELAN6918 (in ACPI) after this patch
`POWER enabled -> RESET deasserted -> Report EN enabled`
BUG=b:247029304
TEST=Verified ELAN touch panel is working as expected after booting
Google/rex device to ChromeOS.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I19629262776f7e0cccbdebb2285890d177a8a8a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
If we show the user early signs of life during CSE FW sync or MRC
(re)training, log these to the eventLog (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:264648959
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I8181370633a1ecff77b051d3110f593c3eb484a2
Signed-off-by: Tarun Tuli <taruntuli@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71295
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In order to support logging events for when we show early signs
of life to the user during CSE FW syncs and MRC trainings add
support for the ELOG_TYPE_FW_EARLY_SOL type.
BUG=b:266113626
TEST=verify event shows in eventlog CSE sync/MRC training
Change-Id: I3913cb8501de9a2605266cf9988a7195576cb91d
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71296
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add a new eventLog type of ELOG_TYPE_FW_EARLY_SOL to support logging
when we show early signs of life to the user.
BUG=b:266113626
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I3bd5a250c0be824dbbad0236cee7d61a1ffdbc6c
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72670
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Contents of the EDID are passed by a reference to an array
of length 0x80, for which the macro 'PTN_EDID_LEN' has already
been around.
This patch makes use of this macro within the driver and mainboard
implementation utilizing it.
BUG=none
TEST=A successful build of mc_apl{1,4,5,7} and mc_ehl3 mainboards.
Change-Id: If7d254aaf45d717133bb426bd08f8f9fe5c05962
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
This is regarding issues observed on multiple Brya and Nissa
variant such as Skolas and Nivviks. Issue is that once coreboot
sets GPE_EN bit for the GPIO pin and locks it, kernel is not able
to change the control bit. Hence kernel is not able to control the
IRQ on the pin when required.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d8
("intelblocks: Add function to program GPE_EN before GPIO locking")
This patch skips the locking for GPP_F14 to allow kernel to
configure it later during reboot or shutdown as required.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas and Brya board with the patch.
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I7e4a6ac4668028bcd5fa400b9aa8eccf36a79620
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72648
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is an existing issue for skolas boards where board wakes up
from shutdown immediately due to touchpad wake signal.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d8 ("intelblocks: Add function to program GPE_EN before GPIO locking")
Later issue was found to be with GPP_F14 configuration for skolas
boards. While shutting down, kernel is not able to disable IRQ for
touchpad due to GPE_EN register getting locked and it is preventing
shutdown of the board.
This patch skips the locking for GPP_F14 to allow kernel to
configure it later.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas board with the patch.
Nissa Bug: 234097956
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I09cf1af1f5ab11b06073755374ee8a306984d557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72426
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Otherwise configurations in src/mainboard/ocp/tiogapass/Kconfig
cannot be selected by
make defconfig KBUILD_DEFCONFIG=configs/builder/config.ocp.tiogapass
Change-Id: I88d5619269a6a9c09e84061642206a17c91db042
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Neither TOP_MEM_MASK nor TOP_MEM_MASK_KB is used, so drop the two
definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b2dfb7be27884dffb948876aabb73f99834c281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
It is about AB recovery layout which only has level 2.
Change-Id: I836f11ca0bf5ad37e5093419465244a5c83318cb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Jamie Chen