Instead of directly accessing the region_name array use a helper
function. This allows to move the region name array to a separate
file.
Change-Id: Ifc810da1628cebd2728d0185502c462ff9428597
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Drop unused chipsets that do not use an IFD.
Change-Id: I999e5e5d2063b8d33819fb22296ed486e1194cbb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Change https://review.coreboot.org/c/coreboot/+/54305 "util/ifdtool:
Use -p platform name to detect IFDv2 platform and chipset" made
the '-p' argument mandatory for IFDv2 platforms.
Drop the IFDv2 platform CHIPSET_C620_SERIES_LEWISBURG from IFDv1
detection.
Change-Id: If29f8718b7aa696cdc07deef4c98be9a68c66f10
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68680
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Wellsburg is IFDv2 compatible in most fields, but not in all.
It only has 8 regions and the flash master bits match the defines for
IFDv1 and thus has an "IFDv1.5" descriptor.
Add a new enum for IFDv1.5 descriptor and use them to properly operate
on this IFD.
The 'SPI programming guide' is inconsistent and mentions 6 regions
in one place, but 7 regions in another chapter. Tests showed that it
actually supports 7 regions.
Add support using the -p argument to specify Wellsburg platform.
The previous patch made sure that only 8 regions are used and that no
corruption can happen when operating in IFDv2/IFDv1.5 mode.
Tested on Intel Grangeville.
Documents used:
Intel Document Id: 516552
Intel Document Id: 565117
Change-Id: I651730b05deb512478d059174cf8615547d2fde4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Co-developed-by: Julian Elischer <jrelis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Use acpi_create_dmar_ds_ioapic_from_hw() to generate DMAR entries.
This can restore s3 resume capability for Sandy Bridge platforms lost
after commit d165357ec3 ("sb,soc/intel: Use
register_new_ioapic_gsi0()").
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I83e735707cd9ff30aa339443593239cd7e3e4656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
USB1_DRV_VBUS is used to provide 5V power for USB on MT8188 EVB and it's
not used on Geralt. Therefore, remove the GPIO setting of USB1_DRV_VBUS.
TEST=read usb data successfully.
BUG=b:236331724
Change-Id: Iffea7b288c83c81648d4c7ca30d2f0961f9853ff
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72641
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With New Crypto upgrade we need to have 1 block of 4Kb increase in
romstage, by which we can see an improvement of Boot performance
by 100 msec.
BUG=b:218406702
TEST=Validated on qualcomm sc7280 development board
Boot performance improved by 100 msec observed.
Change-Id: I9f5c8a79993fc1c529fae5cea4c4182663643ddd
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72646
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
During boot, gpi_firmware_load gets called twice because there are
2 serial engines. Thus gsi_fw blob is also decompressed twice and is
written to base addresses of SEs. This is redundant.
Perform the decompression once on first call and save the header
in static variable which can be reused in next call.
BUG=b:262426214
TEST=Validated on qualcomm sc7280 development board
Saving of 80ms observed while testing with 130 boot cycles.
Change-Id: If98a3974f0791dffdf675c02cc28375d0485c485
Signed-off-by: Vijaya Nivarthi <vnivarth@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71927
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Like Cezanne, Mendocino does not support warm resets. Change all resets
(including resets in the OS) to cold resets (like Cezanne).
BUG=b:248221908
TEST=Run suspend_stress_test, then reboot
Change-Id: I1fbb4cc6eb6e6de9616d00d0191ccf3c0ac55278
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72486
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58faed286718f5eab714cd39001177e50feb4f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic42c67163fe42392952499293e91e35537cb9147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I34d3c4a60653fe0c1766cd50c96b8d3fe63637d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The D-state list lists the devices with the corresponding
D-state that the devices should be in, in order to enter LPM.
DPTF is not mentioned in Intel's document 595644 as one of
the devices.
This CL removes it to avoid a potential error seen in ADL
devices as mentioned in commit 3fd5b0c4cdeb ("soc/intel/adl:
remove DPTF from D-states list used to enter LPM")
TEST=Built and tested on Rex, saw SSDT generated properly.
BUG=b:231582182
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I9192ed9a7fb59ebba14f6d5082b400534b16ca72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72603
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Windows DPTF drivers expect this method, and if not present appear
to hang. Adding this method fixes DPTF under Windows on drallion.
Modeled after existing method used by chrome-ec.
TEST=build/boot Win11 on google/drallion, verify DPTF functional.
Change-Id: I6570345379da413273251ecf5209c4997aac9b11
Original-patch-by: Coolstar <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
After powering on the device, we need to pull USB3_HUB_RST_L up to
enable USB3 Hub.
TEST=boot kernel from USB ok
BUG=b:264841530
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Change-Id: I8df35efb78e90a5b3314840fe2eae81d6e501242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72594
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- The 4.19 release notes included a list of outstanding issues formatted
as a markdown table, which is not supported by Recommonmark. Reformat
as an embedded reStructuredText table.
- The table of boards supported on the 4.18 branch did not include row
separators causing all rows to be rendered in a single row of cells.
- Technotes/console.md had a typo in the rST table formatting which
generated warnings in the Sphinx build, causing the table to not be
rendered in the resulting html.
Change-Id: I86e2c5d6d20e6002b87efc4688fc11b24b341227
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
It should be PSP_RIB_FILE which is already there.
Change-Id: Ie7471489bd34554e357510b04473102d002f9988
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72506
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently there is a problem, where two Displayports are not working. To
be precise: TCP0 and TCP1 (Type-C Port 0/1) are not working.
Setting the lane count of the TCP0 and TCP1 to x1 works fine.
Setting the lane count of the TCP0 and TCP1 to x2 does not work.
Setting the lane count of the TCP0 and TCP1 to x4 does not work.
The reason for that is currently unknown.
This change sets the lane count of the TCP0 and TCP1 Port to x1 length
in the VBT binary.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I182b528275152bf5adcb01a56816afd65674aed3
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72610
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the print message to start with uppercase, 'board'
to 'Board'.
BUG=b:224325352
BRANCH=None
TEST=Able to observe proper print message when invalid board id is
configured.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie82df940cbd1eba9c5d485b48648c2bc8f234aae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72638
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Markdown does not render newlines unless there is an empty line in
between the lines of text. Several command examples and a list were
missing these empty lines, causing their content to be rendered inline
with the preceding text.
Fix this by adding triple backticks around code blocks and bullet points
to rows of text in a list.
Change-Id: I9c1d2b81acdeb378346c68bced0cdbfeeb81bf26
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72625
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In CB:71614 Kyösti pointed out that ACPI_GPE0_BLK is the wrong address
to assign to proc_blk_addr; the correct one would be ACPI_CPU_CONTROL.
When looking a bit closer into this, it turned out that
acpigen_write_processor is generating deprecated AML opcodes, so replace
the acpigen_write_processor call with a call to the newly added
acpigen_write_processor_device function that also doesn't have the
proc_blk_addr and proc_blk_len parameters. The information about the IO
port for entering C-states is already written into an SSDT by
acpigen_write_CST_package which is likely also the reason why the wrong
proc_blk_addr value wasn't noticed for a very long time.
TEST=Mandolin still boots Ubuntu 22.04 LTS and Windows 10 and no
possibly related errors show up. Linux gets the expected C-state
information from the _CST package inside the processor device scope.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie67416e19e431029dd12da66ad44ddfa8586df03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The ACPI PROCESSOR_OP has been deprecated in ACPI 6.0 and dropped in
ACPI 6.4 and is now permanently reserved. As a replacement, DEVICE_OP
with the special HID ACPI0007 should be used instead. This special HID
was introduced in version 3 of the ACPI spec. To have a function to
generate this, acpigen_write_processor_device is introduced. The CPU
index is used as UID which can be assumed to be unique.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb0da903a972be134bb3b9071f81b441f60917d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72469
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Follow thermal team's request on b/248086651 comment#27. Update the
thermal table setting for each mode and the conditions of temperature
switching.
BUG=b:248086651
TEST=emerge-skyrim coreboot
Change-Id: Ida10d9b10c33dea11440879afda07c04c1eccb9f
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This register isn't used in coreboot and isn't defined in the Picasso
PPR #55570 Rev 3.18.
To enter a lower C-state, a read request to a special IO port is done.
The base address of this group of IO ports is configured in
set_cstate_io_addr via the MSR_CSTATE_ADDRESS and that read won't leave
the CPU. IIRC trying to put the MMIO mapping for entering the lower
C-states into the _CST package didn't work as expected when it was tried
on I think Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib189993879feaa0a22f6810c4bd5c1a0bc8c5a27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I7dfd331e70f6d03c88248ca5147dbe6785a8e69d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
It turns out that the [0xfa000000-0xfaffffff] range conflicts with
some North TraceHub address space ranges ([0xfad00000-0xfadfffff] and
[0xfacfc000-0xfacfffff]).
Experiments have established that this conflicting range results in an
unpected PIPE A underrun issue reported by i915 and some visible
flickers on the display during boot.
The [0xf0000000-0xffffffff] range is a crowded memory space with
resources statically assigned to some devices but also some ranges
used at various point in the boot flow by the FSP.
To not run into any other potential conflicts, we want to pick a
unused memory space. But at this early stage of the boot, we do not
have full knowledge of what memory space is going to be used by the
FSP. As a result, we decided to pick the [0xaf000000-0xafffffff] range
as:
1. It does not conflicting with any coreboot memory space usage
2. It is the address the FSP uses by default for GFX MMIO BAR0 and as
such should not conflict with any FSP memory space usage.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=No flickers observed on boot
Change-Id: I6a00350ff4007bb7692d2ff6598b946cc6123302
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72605
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Useful to see which architecture x86_32 or x86_64 coreboot was built for.
Change-Id: I34eec64ac32254c270dcbb97e20a7e6be0f478fc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
This fixes a NULL pointer deref introduced by 69cd729 (mb/*: Remove
lapic from devicetree).
Change-Id: I816fddfe3efe3c3aefe1b2ee28426dc1e1f3c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72599
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is all handled at runtime now, so there is no need to have the
ability to statically add lapics to the devicetree.
Change-Id: I0746eb808a2956ac75f76c8189a9ecf190e33ce9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69378
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Functionality wise nothing changed, except that the first misspellings
caused SBOM_BIOS_ACM_PATH and SBOM_SINIT_ACM_PATH to not work before.
- Fix misspelling of CONFIG_BIOS_ACM_PATH -> CONFIG_SBOM_BIOS_ACM_PATH
- Fix misspelling of CONFIG_SINIT_ACM_PATH -> CONFIG_SBOM_SINIT_ACM_PATH
- Put SBOM_COMPILER_ handling into Kconfig instead of Makefile
- Reorder CONFIG_ paths (for readablity)
- Add in code comments (for readablity)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If67bc3bd0d330b9b5f083edc4d1697e92ace1ea0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The LPC BIOS decode lock bit is defined in EBG EDS documentation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I60df7e6da2b22b8eeb2094aeb5ee9667043bb30b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71954
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
"\" is missing at the end of CC line for build_NASM.
Change-Id: Ic29ee731def31f958f939efe19bdb55b503eb6ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This uses a simpler form of #if to check if CONFIG_SAVE_MRC_AFTER_FSPS
is enabled, referencing the Kconfig variable only once and defaulting
to the original behavior if not.
Change-Id: I4711c1474d9a3a5c685dd31561619c568fab075c
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72587
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The variables defined in this defconfig are incorrectly named, therefore
fix them.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9299be96f8c44d6a87d380f4f942c4d26af7050d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Patrick Rudolph