The PCI registers should be accessed aligned and 0x62 is not 32bit
aligned therefore this patch changes it to a 16bit access.
Change-Id: I00725a4569f471eedb061834f626911b42e734fb
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1631
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Without this, the output of "Setting up ACPI…" continues right
after the output of stepping.
Change-Id: I2ad7cc3e55884ff509600b01274258b8e8250981
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1632
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
This is not available as a config option anymore.
Change-Id: Icac173d62928423a08671321ec21d4af82c5cded
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1630
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
I don't know if the size main memory supposed to be in PCI(0,0) reg 0x9c
but it is not written there. The size of memory is written in
src/northbridge/intel/sch/raminit.c to SCH port(2, 8, 4) (look for
"Setting up TOM").
Change-Id: Iea04a5185bda56f61d1c382533d5a0dac429ebbd
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1629
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The GGC register which contains the size of memory that is used for GPU
is in PCI device 2,0 and not 0,0. It is set to to 4MiB in
src/mainboard/iwave/iWRainbowG6/romstage.c.
Change-Id: Ie9f1cc60544ecd9cad770f34c83c33564a6129d4
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1628
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Without this, the hightables are placed just before the end of memory.
However we might have the GPU memory located at the exact same spot,
that is in the last 4 MiB. So without this patch, this area won't remain
marked as "CONFIGURATION TABLES" within coreboot's memory table but
becomes "RESERVED" because it is part of the PCI(2,0) device.
Change-Id: Ibd111c167c2f6ac03b0ba68581a74ecbd2c9c160
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-on: http://review.coreboot.org/1627
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Change-Id: I7cd63248eb8abb711cecce41e3f8a282b34aa126
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1548
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Update crossgcc to use gcc 4.7.2.
This requires a minor change to util/crossgcc/buildgcc as well.
Tested on hardware with asus/p2b and lenovo/x60.
Change-Id: Ia3921844670ca99741e5715def14dd969f305ab7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1609
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Compilation of acpica-20120420 is broken (and old, but I'll take care
of that in a future patch),
let's fix that ("Building IASL 20120420 ... failed").
Change-Id: If5fd5cd93d748f78b7c059323f9f810666e32cc7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1607
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Change-Id: I2f10909a626fb64c7f95663ddd79a3b899f73bc4
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1606
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
regex, pdcurses, wsock(for itohl) are seperated libraries. mmap and unmmap are
ported from git.
Issues:
1. The length of command line is limited. That makes the Thather can not be built
because too many obj.o need to be built.
Change-Id: I1d60ec5c7720c1e712e246c4cd12e4b718fed05f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The default gcc on mingw will process the __attribute__ ((packed)) in
a different way other than non-win system.
Change-Id: Iac9f4476c922472d0b447f1c3ef60e8e13bd902f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1603
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
make distclean causes error on mingw:
-------
rm: cannot lstat `build/util': Permission denied
make: *** [distclean] Error 1
-------
Guess, When the distclean is made by multi-process, the mkdir
in the Makefile will execute when build is removed. That causes
conflicts.
Change-Id: Ia41ecc5d1db2fa9d3328c81ac1d33fa94779492d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1602
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: Id5564bf7a12b3ea9a5e60bd9522466157ace8c65
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1601
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
src/vendorcode/amd/agesa/f15/Porting.h has some conflicted typedef with
src/include/cpu/amd/common/cbtypes.h. These conflicted defines can lead to errors.
Change-Id: Idad0794018bf0bd0e4e52a5aa062a12766d56c8e
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/1592
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the verbatim variable method to define and export test code and
the actual libpci test from flashrom. This improves readability and
will work with stricter compiler (settings).
Change-Id: Iace7d53b0b992c4fde596ce1d606ad715d6dfc2a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1575
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Separate host bridges/DRAM controllers from LPC controllers in supported_chips_list[].
- Refine some names and macros.
- Clean up some whitespace errors.
- Add IDs and names of 5, 6 and 7 Series southbridges and the three
latest Core CPU families with integrated memory controllers but do
not implement any pretty printing routines for them yet.
The first generation Core family is already supported, although it
was wrongly named after the PCH and used the wrong ID. Also, the BAR
values have been mangled to 32b instead of 64b. Both errors have been
fixed and most basic support for the other two generations was added.
Change-Id: Ief81e57f7c065cafac52e48b6364b57c72fcdf95
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1574
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
&> is a bashism to redirect both outward streams (stdout and stderr), but
with other shells this introduces a race condition with the rm command
after it, because the compiler execution is done in the background/
in parallel. Found and tested with dash.
Change-Id: I08516494828c9f7af168f954f2df027372657867
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1573
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
For BSD, patch and tar are not default GNU. Add a work around
to let the non-gun patch and tar work.
Change-Id: I0a9d0bb0e535aa5e0dde146db330c3c8d7b4d8cb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1502
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of having the highlevel functions make use of the lowlevel
functions, it implemented the lowlevel stuff in terms of highlevel.
Change-Id: I530bfe3cbc6f57a6294d86fbf1739e06467a2318
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1539
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The used FPGA on the device triggers PIRQD for the membrane
keyboard. The used linux driver for the keyboard uses the fixed
IRQ number of 7. In order not to touch the linux driver and be
compatible with proprietary BIOS change the irq_table in
coreboot.
Change-Id: If5bc929eb48bb1eafd401941ebb7d34cf5862c35
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/1571
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
HPET's min ticks (minimum time between events to avoid
losing interrupts) is chipset specific, so move it to
Kconfig.
Via also has a special base address, so move it as well.
Apart from these (and the base address was already #defined),
the table is very uniform.
Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1562
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
This enables building with dash again(?) by using exactly one patch of
SeaBIOS more/newer than previously, which has also the sole purpose of
removing bashism and is a single line change. *sigh*
Change-Id: Ib036894d8b9886f74d6eb0853f1fc0ce1aa39d54
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1568
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
Forcing this rule, chip_ops can be added in the static devicetree
regardless of the existence of the chip.h files.
Change-Id: Iec1c23484e85cab3f80a34f2b082088f38ac4de9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1472
Tested-by: build bot (Jenkins)
Also deletes files not included in build:
src/southbridge/amd/cimx/sb700/chip_name.c
src/southbridge/amd/cimx/sb800/chip_name.c
src/southbridge/amd/cimx/sb900/chip_name.c
Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1473
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
Before change "Simplify VGA card discovery"
(http://review.coreboot.org/#/c/1255/)
coreboot was setting up VGA for the last found VGA device.
After this change it setting up VGA for the first found.
This change broke compatibility to my Supermicro H8QGI board.
Revert order back to old to save compatibility for this board
(and maybe any other boards)
Change-Id: Id5f2be60f95298059651c26133806e2694ff60aa
Signed-off-by: Kostr <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/1561
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
According to file "northbridge.c" in family 15h code
IO-HUB should be placed on link_lsit[0] in devicetree.cb.
This hack in "northbridge.c" was made to satisfy both f10 and f15 cpu's.
Change-Id: I4754235bd38239460347b0dc4a82cd4e58ae7cd0
Signed-off-by: Kostr <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/1540
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The classes in $(top)/Makefile uses $(abspath) to get the path.
The $(abspath) can not resolve symlink. If the coreboot is located
in a symlink directory, the run_printall produces the absolute
path while the $PWD just produces the path with symlink. Use
`pwd -P` to get the abs path.
Change-Id: Icf6b364d030c14a9c78991767b17dafc701baf3c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is in preparation for sharing interrupt handlers
between YABEL and x86emu.
Change-Id: Iff92c1d899b8ada20972731944341805a49b6326
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The previous commit provides a mainboard_interrupt_handlers
implementation YABEL with identical semantics to the
x86emu one, so let's use it in both cases.
This eliminates the need for the int15_install()
indirection, so let's drop that, too.
Generated using the following coccinelle patch and
manual cleanups (empty #if/#endif):
@@
type T;
identifier FUNCARR;
expression INT, HANDLER;
@@
-typedef T yabel_handleIntFunc;
-extern yabel_handleIntFunc FUNCARR[256];
-FUNCARR[INT] = HANDLER;
+mainboard_interrupt_handlers(INT, &HANDLER);
@@
@@
-void int15_install(void)
-{
-mainboard_interrupt_handlers(0x15, &int15_handler);
-}
@@
@@
-void int15_install(void)
-{
-mainboard_interrupt_handlers(0x15, &int15_handler); ... mainboard_interrupt_handlers(0x15, &int15_handler);
-}
@@
@@
-int15_install();
+mainboard_interrupt_handlers(0x15, &int15_handler);
Change-Id: I70fd780d7ebf1564a2ff7d7148411673f6de113c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1559
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide (mostly) the same API for registering
interrupt handlers as with x86emu.
Change-Id: I1364b08d9043039550786a1758508ae088813aa3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1558
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
our code supports tyan s8226 now, which has two cpus on the board
the cpu socket is C32. The details of tyan s8226 is:
http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190
the test result of this mainboard is:
1) boot Ubunbu 11.10, kernel 3.0.9. there is no err and warnings in
dmesg.
2) boot windows7 x64 successfully.
3) use fwts to test the bios, there are 268 pass and 14 failed
4) pcie and usb slots are ok.
5) all network interfaces are ok.
Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/1495
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
After make 3.81 is copied to /usr/local/bin, the old make 3.80, which
doesn't work for coreboot, will replace $MAKE with gnumake. That is not
we want.
Change-Id: I87fbe95c70228a22f2c233ff071df29639b63726
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
pirq_routing_irqs assumed that only four links are available for PIRQ
routing, INTA to INTD. Some chipsets provide more, up to INTH.
When pirq_routing_irqs found a link number greater than 4 in the pirq table,
it would not assign that IRQ. This is a shame, as it limits the flexibility
of routing IRQs.
Make the maximum number of links a Kconfig variable, and modify the code to
respect it. This works beatifully on the VX900, which provides 8 routable
interrupts.
While we're at it, also refactor pirq_routing_irqs, and add some much
needed comments.
Rename pirq_routing_irqs to pirq_route_irqs to demistify the role of this
function.
The copyrights added were determined from git log filename.
Change-Id: I4b565315404c65b871406f616474e2cc9e6e013e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/1482
Tested-by: build bot (Jenkins)
Previously we assume that hardware using 8 bits
per char by default, but on Asrock A53 Pro
this is not true (7 bit per char by default).
Forcing use 8n1 now.
Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1541
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Makefile still used SVNDEF on FreeBSD.
Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1554
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Idwer Vollering