This patch restores the permission check for the kernel space which
was dropped when read_space_kernel was moved from Depthcharge by
CL:2155429.
BUG=chromium:1045217, chromium:1020578
BRANCH=none
TEST=none
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: If6d487940f39865cadc0ca9d5de6e055ad3e017d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40579
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Romstage is now where software sync is performed for chromebooks.
EFS2 has been ported to romstage from Depthcharge. Puff should
follow.
This patch enables CONFIG_EARLY_EC_SYNC and disables
CONFIG_VBOOT_EC_EFS. EFS2 will be done in romstage.
BUG=b:147298634, chromium:1045217
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I8d7c25f8281496c7adb282f5d4e0fc192d746e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40390
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 46ff62c3:
vboot: stop reading from ACPI for wpsw_boot
to commit id 55154620:
vboot: Add screens for recovery using disk
This brings in 37 new commits.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ie184cbe6cc18cea540966d5801472ae821ea3e86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40503
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a helper function dev_find_matching_device_on_bus()
which scans all the child devices on the given bus and calls a
match function provided by the caller. It returns the first device
that the match function returns true for, else NULL if no such device
is found.
Change-Id: I2e3332c0a175ab995c523f078f29a9f498f17931
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40543
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change enables support for generating ACPI nodes for I2C tunnel for
any GOOG0012 device that is sitting behind the Chrome EC. It accepts a
config "remote_bus" which allows mainboard to configure the id of the
remote bus that is being tunneled.
BUG=b:154290952
BRANCH=None
TEST=Verified that SSDT node for I2C tunnel behind Chrome EC is
generated correctly.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Icfc0ec3725d7f1d20bcb5cb43a0a23aac72bf4eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add keymaps for keys that are not present in US keyboards.
Change-Id: I1ad4c483e81438456533b4c071a4a56cbee88f9c
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds scan_static_bus() as .scan_bus() callback for Chrome EC
device which allows scanning of devices sitting behind the EC using
the topology provided by mainboard's devicetree.cb.
BUG=b:154290952
TEST=Verified with follow-up changes that devices behind EC are scanned
correctly.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id3630db56774fba1e3fc53bf349588c4c585773b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40514
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In ACPI tables, Chrome EC device (CREC - HID GOOG0004) is a child of
EC device (EC0 - HID PNP0C09). However, in coreboot device tree, there
is no separate chip/device for EC0. Thus, acpi_name() needs to return
EC0.CREC as the ACPI name for the Chrome EC device. By returning the
ACPI name as EC0.CREC, all devices that live under Chrome EC device
can simply call acpi_device_path()/acpi_device_scope() to emit the
right path/scope.
In the future, if we ever add a special chip driver for handling EC0
(HID PNP0C09), then the ACPI name for Chrome EC can be fixed to return
CREC.
BUG=b:154290952
TEST=Verified that acpi_device_path()/acpi_device_scope() return the
correct name for Chrome EC device.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Iec4b0226d1e98ddeb0f8ed8b89477fc4f453d221
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change checks to ensure that device/path passed into any of the
functions in device_const.c is not NULL. Since NULL is not expected to
be passed into these functions, this change adds a die() call in case
the assumption is broken.
Change-Id: I1ad8d2bcb9d0546104c5e065af1eeff331cdf96d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The EDID and command sequence are from BOE, the vendor.
BUG=b:148997748
TEST=Boots on Chromebook Kakadu and displayed developer firmware screen successfully.
Change-Id: Ieb510cb28882afc5b8023c2a57b31187e4a09fbd
Signed-off-by: Scott Chao <scott.chao@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40396
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are microcodes in .inc format out in the wild which contains
lines with just a comment. So these files look like the following
example:
; External header
dd 000000001h
dd 00000001bh
...
; Data
dd 000000000h
...
The lines with just a comment starts with a ';' and will break
the current awk formatting which is performed to reformat the content
into C code style. As we are just interested in the data we can simply
drop all lines that start with a ';' which sed can do pretty easy.
Change-Id: I9ff5db51667672cffd9d776fb9497962b4a6083a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The double quotes around the remaining shell parameters '${@:2}' causes
that the provided *.h files in $(CONFIG_CPU_MICROCODE_HEADER_FILES),
which is a space separated list, cannot be broken down to every single
file as needed but stay as a single parameter in the for-loop.
Therefore, the called function 'include_file' will get a single
parameter with all files which will lead to a broken C code in
terms of a wrong #include-syntax. This causes the script to fail.
To fix this remove the double quotes which works just fine.
Change-Id: Iab7b0dc8d850973d6af764899907d383e9ec7743
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Newly added code in commit CB:25546 contains spaces instead of TABs for
line indent. Replace every 4 spaces by a single TAB to match our coding
guides.
Change-Id: Ie3633bb42643f4abb5f1a8827a7dc2c9e023d6aa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some PCI peripherals, such as discrete VGA adapters, require a great
amount of memory mapped IO. This patch allows the user to select at
build time the bottom IO to leave enough space for such devices.
We cannot calculate this value at runtime because it has to be set
before the PCI devices are enumerated. 0x80000000 has been successfully
boot-tested on A88XM-E (fam15tn), G505S (fam15tn) and AM1I-A (fam16kb).
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ie235631231bcb4aeebaff2e0026da2ea9d82f9d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Jenkins does not build using .config.facebook_fbg1701 on new patches.
Rename the config file adding '.mboot_vboot'. Now FACEBOOK_FBG1701
and FACEBOOK_FBG1701_MBOOT_VBOOT are included in Jenkins test result.
BUG=N/A
TEST=Build and boot Facebook fbg1701
Change-Id: Ib54cc29e7ff34553c19fa3502872d6e7aee5fbe8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40557
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
USB routing has changed on reference schematics after Puff rev1 has
built. This may confuse people trying to c&p devicetree from the Puff.
So add comment to clearly note that there was change, hopefully
preventing c&p errors.
BUG=b:153682207
BRANCH=None
TEST=None
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I5c43a5c04c81b6708c9eeabc48ef11961d7c8561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40546
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SMBus uses 7-bits address, change it from 8-bits to 7-bits.
BUG=b:151702387
TEST=Check Memory SPD data is correct in console log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1720b4d6aa0bc785ad86234b3523bb0676ec5c82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Deltan will be using the integrated Intel GbE for LAN
functionality. Deltaur will not have a LAN port, and so does not need
the GbE region. This patch adds a new FMAP descriptor file which
explicitly supports the GbE region (chromeos-gbe.fmd), and removes the
GbE region from chromeos.fmd. Deltan is then assigned chromeos-gbe.fmd,
and Deltaur is assigned chromeos.fmd.
BUG=b:150165131
TEST=emerge-deltaur coreboot chromeos-bootimage
and use ifdtool -p tgl -t image-delta{ur,n}.bin to make sure FMAP aligns with IFWI
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib93d5ba7f8dbf273ba7c1163022661ede1f44ab4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add Type-C subsystem power management support for RTD3.
BUG=b:140290596
TEST=Include "tcss.asl" in platform "dsdt.asl" for coreboot build
with the firmware CM. Added acpi debug and booted to kernel. Probed
devices PM_STATE transition from D0 to D3 entry/exit while system at S0.
TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3, offset:0xA4, PM_STATE:D3HT.
xhci:00:0d.0, offset:0x74, PM_STATE:D0D3.
dma:00:0d.2/00.0d.3, offset:0x84, PM_STATE:PMST.
Verified xhci/dma/pcie root ports power runtime_status to be suspended and suspended
time tick through /sys/bus/pci/devices/bus:device:func/power.
Change-Id: I127d3700ad426a44639ee93b4477be6638b42e1b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The WDB (Write Data Buffer) is a data region in CAR, used as a
scratchpad in the read and write training algorithms of memory
initialization. Both SNB and IVB use this buffer, but HSW does not.
Unlike earlier chipsets, Haswell contains much more in-hardware memory
training machinery, known as REUT (Robust Electrical Unified Testing).
Among other changes, the REUT hardware has a pattern storage buffer,
which renders the need for a pattern storage buffer in CAR obsolete.
Deprecate the WDB-related parameters in the pei_data structure for
Haswell, as they are leftovers from the previous generation's MRC.
Remove them from the mainboards, and explain why they are not required.
Because the MRC ABI has to remain the same, the layout of pei_data must
not be changed, so rename the WDB parameters instead of deleting them.
Tested on Asrock B85M Pro4, still boots with the MRC from Google Wolf.
Change-Id: I7acc9353a22f8c6f9fe6407617162f35849a79dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This implements the SPI driver for the QUP core.
Change-Id: I86f4fcff6f9537373f70a43711130d7f28bd5e09
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36517
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This implements the UART driver in SoC
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25373/78
Change-Id: I6494daa108197c030577ac86dab71f9ca6c21bdb
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35500
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The frequency to be used by UART client is 7.3728MHz, thus define it in
the clock header to be used by the driver.
Tested: UART frequency request by client driver.
Change-Id: I1ced350fe9826ea05b03ffc11aced2c21fe85c9e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Enable Wifi and Bluetooth for Jasper Lake RVP with following changes:
1. Enable related pci root ports for WLAN and BT
2. Disable unused root ports and clkreq for unused clocks
3. Configure GPIOs properly for M.2 port
BUG=None
BRANCH=None
TEST=Code compiles and able to detect Wifi/BT module on board.
Change-Id: Ifbd07022c05769c04ecd49c81a4430947125b32a
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39933
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
M.2 WWAN interface has GPIOs which requires coreboot to
configure all related GPIOs as per board schematics.
BUG=None
BRANCH=None
TEST=code compiles and WWAN device is detected in OS
Change-Id: I8ad978a619b50e16ad754177f1eb05cf7670b79f
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Each physical port should have the same group and position for both USB2
and USB3, but puff and its variants use different layout than the
baseboard so they must override PLD.
Ports are split into two groups for front and back, with positions in
each group numbered from left to right.
BUG=b:151579409
BRANCH=none
TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT.
Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Query the EC to get the top row layout, and if it provides one,
generate the SSDT for the PS2 keyboard.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I75d2eee32c82b9bee73436b08b5f615d1b388148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40032
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a wrapper command for the subject command
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I29a4021c2ea0d1cbb4a72f56bf2232d8f9c80ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add new file to generate ACPI _DSD code for PS2 keyboards. The
following 2 device properties are generated as needed:
function-row-phymap: A list of ordered scancodes for function row.
linux,keymap: Symantically, this is an array of "scancode,keycode"
tuple entries. Each entry teaches linux the keycode corresponding
to a scancode.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I5ee05173106a125793e91c263610731543c85472
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
`lib_sysinfo->serial` is a virtual pointer into coreboot tables.
It's not valid across relocation. Accessing the wrong value during
relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART
console enabled. Work around that by caching the whole table entry
locally.
An alternative would be to revise `sysinfo`, to contain no virtual
pointers to anything outside the payload.
Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reto Buerki <reet@codelabs.ch>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There have been two cases of incompatibilities between overlapping
changes, and they need to be resolved in a single commit to unbreak the
tree:
1. CB:40389 introduced a new use of write_secdata while CB:40359 removed
that function in favor of safe_write.
Follow the refactor of the latter in the code introduced by the former.
2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface
and adapted all its users. Except for duffy and kaisa which were only
added in CB:40223 and CB:40393 respectively, so reapply the patch to
puff's mainboard.c to their mainboard.c files.
Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch adds psys_pmax calculation. There are two types of power
sources. One is barrel jack and the other is USB TYPE-C. The voltage
level is fixed for a barrel jack while TYPE-C may vary depending
on power ratings. We need to get voltage information from
EC and calculate correct psys_pmax value. The psys_pmax needs to be
set before FSP-S since FSP-S will handle the setting passing to pcode,
so move the routine ahead to variant_ramstage_init.
BUG=b:151972149
TEST=emerge-puff coreboot chromeos-bootimage
check firmware log and ensure psys_pmax is passed to FSP
check the data from dump_intel_rapl_consumption in the OS and
ensure the power data is close to an external power meter.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Remove entries for old utilities and add entries for new ones.
Generated using util/util_readme, with some tweaks to preserve the
markdown.
Change-Id: I3a4d8a6bf15a677aa07aa72b8809328110fb72da
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is a micro ATX board with a LGA1155 socket and two DDR3 DIMM slots.
Porting was done using autoport and then doing a bunch of manual edits.
Actually, I have the PLUS variant, but they use the same PCB. The only
difference is the capacitor quality.
Working:
- Both DIMM slots
- PS/2 keyboard
- S3 suspend/resume
- Rear USB ports
- Integrated graphics (libgfxinit)
- VGA
- All PCIe ports
- Realtek GbE (coreboot must set the MAC address)
- SATA ports
- Native raminit
- Flashing with flashrom
- Rear audio output
- VBT
- Arch Linux using CorebootPayloadPkg
Untested:
- PS/2 mouse
- The other audio jacks
- EHCI debug
- Front USB headers
- Non-Linux OSes
Change-Id: I385ee72673202d896041209ff2911995307cb6af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update memory topology for spd info. Deltan supports SODIMM and
Deltaur supports MEMORYDOWN.
BUG=b:151702387
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If314894325d6f222807030a36f8c4cefecfe5bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Later EliteBooks use different EC chips and have different EC firmware
interfaces, so rename the document elitebook_series.md to a more
precise name and also do some rewriting.
A link to the code review page for 8760w is also added because the
port for this laptop is not merged yet.
Change-Id: I2f9b8c4e52ed760c16977d16838cca9e490cda05
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch adds voltage and curent parameters in
google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could
use the voltage and current information to calculate charger power rating.
The reason for this change is, some applications need the voltage information
to calculate correct system power eg PsysPmax.
BUG=b:151972149
TEST=emerge-puff coreboot; emerge-fizz coreboot
Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Remove explicit setting of iDisp Link parameters. These settings are
related to configuration for the link between HD-Audio controller and
Display unit for purposes of HDMI/DP Audio playback. During PO,
observed that without setting these params display part was not
binding. With the latest code verified that we dont need to explicitly
set these parameters anymore. HDMI/DP audio playback works fine with
default settings.
BUG=b:151451125
BRANCH:none
TEST= build and boot volteer/ripto and verify HDMI/DP audio playback
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jairaj Arava <jairaj.arava@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Changing the local pointer "start" has no effect.
Changing the value it points to has.
Change-Id: I1b689896fcf255b795b27d7a7163849d6dfdb00e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
All variants will use the same lid/thermal-polarity config as a result,
which looks the same for all recently boot-tested variants anyway.
Change-Id: Iaaae4eae41ab0037e72375b255d9d1c3eca8d383
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
H1 uses I2C3 in the HW schematics and connects to GPP_H6 and GPP_H7.
Previous setting was wrong so correct it.
BUG=b:150165131
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I43c18baea66b927d51689579a40a53f72b94ef36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40487
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds _DSM Method in LPIT table for entering and exiting
S0ix. This method get injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
BUG=b:148892882
BRANCH=none
TEST="BUILD"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib58f2e33a33bac9cc5f6aca28e85a8066413a5cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Disable dynamic clock gating for the community cr50's IRQ lives on.
That IRQ is pulsed very quickly, and with clock gating enabled pulses
tend to be missed. This is expecially true on the default 0.0.22
firmware that cr50 comes with out of the factory.
BUG=b:154178408 b:154293730
BRANCH=None
TEST=build waddledoo successful and Linux has no TPM IRQ timeout error.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Configure DRAM population strap GPIO according to the schematics.
Configure an internal pull-up to support the boards in which the strap
is not populated. Read the strap and pass that information to FSP for
memory initialization.
BUG=b:152275658, b:154301008
TEST=Build and boot the mainboard. Ensure that the strap information is
read as expected and passed to FSP.
Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original AMD_PLATFORM_MOBILE is incorrect because this board is a desktop one.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I02adedffe8624c38e7b93fadd0449ddf094388fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33919
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Daisuke Nojiri