The offset of 0x2000 was for a configuration with two separate OxPCIe
chips. The setup we support is a single chip with 8 UART pors.
Change-Id: If4be046a14464af7b90b86aca5464c6b3400dffc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8780
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Move the GPI interrupt routing selection between SMI/SCI from
mainboards to southbridge. There is speculation if this is all
just legacy APM stuff that could be removed with a followup.
Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7967
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
For lenovo/x201, this also changes GPI_ROUT (0xb8-0xbb)
programming to use GPI1 between SCI/SMI modes, while
previous programming was for GPI12.
Change-Id: I3ac0feaa1d10c8f0e53a5fa5af72366503bb5d2d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8656
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mips toolchain used by coreboot so far comes from Chrome OS chroot
and is built explicitly for little endian code generation.
Other flavors of MIPS toolchain usually generate big endian code by
default and require command line options to switch to little endian
mode.
This patch adds another variable to the set of compiler flags examined
to determine compiler compatibility. This results in adding another
nested for loop in test_architecture(). To avoid the need to break
from different levels of nesting, processing of the successful case is
taken out from test_architecture().
With this change the Mentor Graphics provided mips GCC toolchain is
accepted by xcompile, resulting in the following output:
ARCH_SUPPORTED+=mips
SUBARCH_SUPPORTED+=mips mipsel
CC_mips:=mips-linux-gnu-gcc
CFLAGS_mips:= -Wno-unused-but-set-variable -fno-stack-protector -Wl,--build-id=none -mno-abicalls -fno-pic -EL
CPP_mips:=mips-linux-gnu-cpp
AS_mips:=mips-linux-gnu-as
LD_mips:=mips-linux-gnu-ld
NM_mips:=mips-linux-gnu-nm
OBJCOPY_mips:=mips-linux-gnu-objcopy
OBJDUMP_mips:=mips-linux-gnu-objdump
READELF_mips:=mips-linux-gnu-readelf
STRIP_mips:=mips-linux-gnu-strip
AR_mips:=mips-linux-gnu-ar
Change-Id: I4da384b366880929693c59dc0e1c522b35c41bea
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9997
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Declaring function variables local improves bash scripts' robustness.
Cosmetic changes among other things include renaming variables from
plural to singular and vice versa as appropriate, and replacing spaces
with tabs.
Tested by confirming that sorted output generated by
util/xcompile/xcompile is the same before and after the change.
Change-Id: I7305b3a4e45478ed3653b7d915dde4f83965f6c1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9996
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make fails to update .xcompile in case there is an mv alias preventing
silent overwrites of existing files. To avoid ambiguity, invoke mv
from standard location.
While we are at it, drop the code creating a unique .xcompile instance
before copying it into destination: this was done for the case of
running multiple independent make processes in parallel, but there is
a problem with this approach with multiple processes copying their
unique copies into the same destination file.
The tool running multiple make invocations in parallel should
explicitly invoke xcompile first.
Change-Id: Iedc5e288fbcc5dfc18ce39de5c067bb869a13275
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change switches all southbridge vendors and southbridges
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in southbridge/Makefile.inc or in
southbridge/<vendor>/Makefile.inc.
In order to be able to drop southbridge/amd/Makefile.inc, some
scattered source files had to be moved to a southbridge/amd/common
directory, in accordance to what we are doing on other architectures
already.
This means, vendor and southbridge directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9796
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The new -Og optimization level is only available in gcc version 4.8
or higher. Clang fails on this too as of now (with "invalid integral
value 'g' in '-Og'"). The gain of this does not outweigh this
limitation at all. The flag was added in 0e53931.
Change-Id: I2b2dfc786369653d768f25be94b53329451ae1b4
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/9999
Tested-by: build bot (Jenkins)
Reviewed-by: Sol Boucher <solb@chromium.org>
Long auto-increment access cannot be used when our initial address is
misaligned or when our terminal address is misaligned on write
operations.
BUG=chrome-os-partner:38224
TEST=Verify host command functionality on cyan.
BRANCH=None
Change-Id: Ieba0e8e05dabd44a28c63d5d56a2a634c2d349bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7237c8df027ae70a38478846ff3d5ce97543ff1
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: Id709ca92cc386f9ea5b2a1139733961e1bc59354
Original-Reviewed-on: https://chromium-review.googlesource.com/266653
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9987
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch enables on storm the recently introduced 'console buffer
dump on reboot' capability.
BRANCH=none
BUG=chromium:475347
TEST=generated storm image with serial console disabled and both rw
firmware A and B sections corrupted. Programmed the new image on
an SP5 device and rebooted it. Observed the device dump cbmem
console buffer to the serial output, terminating with
VB2:vb2_fail() Need recovery, reason: 0x3 / 0xa
Reboot requested (1008000a)
Saving nvdata
SF: Detected S25FL128S_256K with page size 10000, total 2000000
and the LED ring started flashing indicating recovery mode.
Change-Id: Idb50c86f59f393c783ccbc15de8f5564e2a1b38e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ec88001b152bb9f1d7268b83367131b004816f8
Original-Change-Id: I9345eeb4d375f42fb1e4c617495b63b308ce51d9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9986
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The new function can be compiled in only when serial console is
disabled.
When invoked, this function initializes the serial interface and dumps
the contents of the CBMEM console buffer to serial output.
BRANCH=none
BUG=chromium:475347
TEST=compiled for different platforms with and without serial console
enabled. No actual test of this function yet.
Change-Id: Ia8d16649dc9d09798fa6970f2cfd893438e00dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a38a8254dd788ad188ba2509b9ae117d6f699579
Original-Change-Id: Ib85759a2727e31ba1ca21da7e6c346e434f83b52
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9984
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It returns TPM_E_NO_DEVICE for all calls.
BRANCH=None
BUG=None
TEST=manual MOCK_TPM=1 emerge-foster coreboot, and
coreboot can boot to kernel
Change-Id: Id7e79b58fabeac929b874385064b2417db49a708
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a9a91a65af115657e7317754eda931120750c56d
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I8dcf0db14cf2bc76c67a3bd7f06114e70e08764d
Original-Reviewed-on: https://chromium-review.googlesource.com/264946
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9983
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the spirit of include what you use actually #include
the header necessary for fmap calls.
Change-Id: I7acede51d7139234c0520281799dad3a8d33454f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9968
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The value of SMM_TSEG_SIZE was equal to SMM_RESERVED_SIZE. This caused
the install_permanent_handler() function to fail. Changed the value to
0x800000, which is already used as default in smm_region_size() in case
SMM_TSEG_SIZE is 0.
Change-Id: I4ff3568aefd4729a98c1777a2cae2a4715afbc2f
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/9961
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
CPTR_EL3 and CPACR_EL1 are the registers for controlling the trap level
and access right of the FPU/SIMD instructions. Need to save/restore them
in every power cycle to keep the settings consistent.
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I96fc0e0d2620e72b6ae2ffe4d073c9328047dc01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73e8cc8f25922e7bc218d24fbf4f7c67e15e3057
Original-Change-Id: I51eed07b1bb8f6eb2715622ec5d5c3f80c3c8bdd
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266073
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9981
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Implement the individual core powerdown sequence as per
Cortex-A57/A53/A72 TRM.
Based-on-the-work-by:
Varun Wadekar <vwadekar@nvidia.com>
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I4719fcbe86b35f9b448d274e1732da5fc75346b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bdcc12150820dfad28cef3af3d8220847c5d74
Original-Change-Id: I65abab8cda55cfe7a0c424f3175677ed5e3c2a1c
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265827
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9980
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patchs introduces level specific data cache maintenance operations
to cache_helpers.S. It's derived form ARM trusted firmware repository.
Please reference here.
https://github.com/ARM-software/arm-trusted-firmware/blob/master/
lib/aarch64/cache_helpers.S
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: Ib58a6d6f95eb51ce5d80749ff51d9d389b0d1343
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3d1a16bd0089740f1f2257146c771783beece82
Original-Change-Id: Ifcd1dbcd868331107d0d47af73545a3a159fdff6
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9979
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Same as commit fe0eac5f416e "arm64: Allow cpu specific early setup", we
need the same in secmon too.
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: I5b1347880306a95f99233db12cb99547bad4aa8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f70fd940ff92eb5b8991cd777c2894b7a9633cf
Original-Change-Id: Ifce5a6d636051e7a447d055c8e09ed4e29e091c7
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265825
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Call arm64_cpu_early_setup to allow cpu-specific initialization to be
performed. Also, add support for setting SMPEN bit for cortex a57
within arm64_cpu_early_setup.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully and SMP works for foster
Change-Id: Ifa4e6134dbce3ad63046b3dd9b947c3d9134d5e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fe0eac5f416efcf9f7b05388a17444205a8352c0
Original-Change-Id: I28a05a20e6adf084cd0bf94bdd0c3b492632107c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262993
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9977
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
dd doesn't recognise hex number. the commit introducing this:
f21b657 build system: improve portability by not relying on extraordinary dd options
Change-Id: Ie0df3eb00fa2ba5d7bbb8218e24b864cbdd07c3a
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/9944
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This test outlives its usefulness and only slows down commits.
We can now be confident that out-of-tree builds work because
some of our automated builders do them regularly.
Change-Id: I7c27e613ddd16f7bacbd4e232596b8a76e0c3301
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
bzip2 --version |grep -c will wait for input on stdin. ./buildgcc will hang because of this.
Add `cat /dev/null |` close the stdin.
Change-Id: I2a8b08a4d90ca7a89705923d5b68ba6ac13f29b3
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I16e7c376fe6d79676734df325ac61449bb2d0871
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9982
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Because cbfs_add_entry_at() previously *assumed* it would have to create a
trailing empty entry, it was impossible to add files at exact offsets close
enough to the end of an existing empty entry that they occupied the remainder
of its space. This addresses the problem by skipping the step of creating the
trailing empty entry if doing so would place it at the start offset of whatever
already followed the original empty section.
BUG=chromium:473511
TEST=Run the following commands:
$ ./cbfstool test.image create -s 0x100000 -m arm
$ dd if=/dev/zero of=twok.bin bs=1 count=2048
$ ./cbfstool test.image add -t 0x50 -f twok.bin -n at_end -b 0xff7c0
$ ./cbfstool test.image add -t 0x50 -f twok.bin -n near_end -b 0xfef80
$ ./cbfstool test.image print
There shouldn't be any assertions, and the output should be:
test.image: 1024 kB, bootblocksize 0, romsize 1048576, offset 0x40
alignment: 64 bytes, architecture: arm
Name Offset Type Size
(empty) 0x40 null 1044184
near_end 0xfef40 raw 2048
at_end 0xff780 raw 2048
BRANCH=None
Change-Id: Ic8a6c3dfa4f82346a067c0804afb6c5a5e89e6c8
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 1bbd353fddc818f725e488e8f2fb6e967033539d
Original-Change-Id: I15d25df80787a8e34c2237262681720203509c72
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263809
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/9938
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This enables more warnings on the cbfstool codebase and fixes the
issues that surface as a result. A memory leak that used to occur
when compressing files with lzma is also found and fixed.
Finally, there are several fixes for the Makefile:
- Its autodependencies used to be broken because the target for
the .dependencies file was misnamed; this meant that Make
didn't know how to rebuild the file, and so would silently
skip the step of updating it before including it.
- The ability to build to a custom output directory by defining
the obj variable had bitrotted.
- The default value of the obj variable was causing implicit
rules not to apply when specifying a file as a target without
providing a custom value for obj.
- Add a distclean target for removing the .dependencies file.
BUG=chromium:461875
TEST=Build an image with cbfstool both before and after.
BRANCH=None
Change-Id: I951919d63443f2b053c2e67c1ac9872abc0a43ca
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 49293443b4e565ca48d284e9a66f80c9c213975d
Original-Change-Id: Ia7350c2c3306905984cfa711d5fc4631f0b43d5b
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257340
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9937
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fastboot data in Intel FSP project is printed by hexdump32() in dword
length. So the data length needs to be divided by 4 when printing it.
Change-Id: I959d538bd6e60282882dd138045cc730b4bd8159
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/9976
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This reverts commit d555d5a2b5.
It produces too much clutter, and is not particularly useful.
Change-Id: I62268a215a22a5cc76a10cdcfcae86349b466963
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/9990
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>
Add the option to add a release year to each mainboard to
get a sense of how old the hardware is.
Change-Id: Id43c80fdf8bf65241b2be92678616d1774529f8c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9945
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific
directory. See follow-on patches for sharing of common code.
Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In commit b0d8f5e9 I moved the call to cbmem_initialize()
in the CONFIG_EARLY_CBMEM_INIT case to the very beginning of
ramstage. However, that caused an issue in the ordering of the
cbmem console driver in that it expects cbmemc_init() to be
called prior to cbmemc_reinit(). Therefore, ensure console
is called as the first thing even if some time is lost w.r.t.
timestamp tracking.
Change-Id: I42137d28116e0bccb9235f4e3f394d4fd8b84e37
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9933
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The Kconfig options pertaining cbmem console in the preram
environment no longer make sense with the linker script
changes. Remove them and their usage within cbmem_console.
Change-Id: Ibf61645ca2331e4851e748e4e7aa5059e1192ed7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9851
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This enables its _size variable (a macro) to work even when
the console has no location assigned to it in the chip/board's
memlayout.ld.
Since _size == 0, the code will do the right thing.
Change-Id: I6b42ed0c5c3aaa613603680728b61cbdb24c4b61
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9973
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To simplify browsing the "Supported hardware" list, I added Release year
for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel,
lenovo, apple, jetway and hp. Still several models and manufacturers to
add information to. This is more of a proof-of-concept.
The "Release year" will be shown in the wiki page.
Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947
Signed-off-by: Mathias Friman <mathias@workplays.se>
Reviewed-on: http://review.coreboot.org/9963
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Add a new mainboard based on AMD's Family 15 Model 30 processor.
TEST: Lamar will boot DOS, Ubuntu 14.10 and Windows 7.
Change-Id: I2f73c396247239d54f978846e8958950697d7464
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5968
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
By design, the imd library still provdes dynamic growth so that
feature is consistent. The imd-based cbmem packs small allocations
into a larger entry using a tiered imd. The following examples show
the reduced fragmentation and reduced memory usage.
Before with dynamic cbmem:
CBMEM ROOT 0. 023ff000 00001000
aaaabbbb 1. 023fe000 00001000
aaaabbbc 2. 023fd000 00001000
aaaabbbe 3. 023fc000 00001000
aaaacccc 4. 023fa000 00002000
aaaacccd 5. 023f9000 00001000
ROMSTAGE 6. 023f8000 00001000
CONSOLE 7. 023d8000 00020000
COREBOOT 8. 023d6000 00002000
After with tiered imd:
IMD ROOT 0. 023ff000 00001000
IMD SMALL 1. 023fe000 00001000
aaaacccc 2. 023fc000 00001060
aaaacccd 3. 023fb000 000007cf
CONSOLE 4. 023db000 00020000
COREBOOT 5. 023d9000 00002000
IMD small region:
IMD ROOT 0. 023fec00 00000400
aaaabbbb 1. 023febe0 00000020
aaaabbbc 2. 023feba0 00000040
aaaabbbe 3. 023feb20 00000080
ROMSTAGE 4. 023feb00 00000004
Side note: this CL provides a basis for what hoops one needs to
jump through when there are not writeable global variables on
a particular platform in the early stages.
Change-Id: If770246caa64b274819e45a26e100b62b9f8d2db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9169
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
elog breaks the build if ELOG_FLASH_BASE isn't configured -
and CHROMEOS isn't enabled, since with Chrome OS builds, it
just uses fmap to find out the base.
So it makes sense to enable it on all Chrome OS builds - if
the code never uses it, the linker will drop it soon enough.
Change-Id: I7ee129fadf75caf15fb9bd32b0acf6f7d9d015d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9965
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of switching off the LED ring for the normal boot path, turn
it on with the dedicated pattern, indicating that the device firmware
has started executing.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=program the new firmware on an SP5 device and verify that the new
'normal boot' pattern is displayed in all following scenarios:
- power up the device (the pattern shows within the first second)
- boot the device to bash prompt and restart.
- press the recovery button and reboot the device. Once the LED ring
shows the 'recovery button pressed' pattern, release the recovery
button.
Change-Id: Iedd66d2575ad587af77e35d23efb22a83a92858b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 092358bd17a323d0bd2fec555f43cb587486bbec
Original-Change-Id: I24de45326eab83b57bcf16b5598388f81c7d0f00
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265536
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9923
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It became necessary to indicate the beginning of the normal boot
process. This patch adds a new pattern, a slow (over 2 seconds) fade
in into the 0, 87, 155 color.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=tested by the next patch.
Change-Id: Idd977688e5aa2cc55fc295072c0766526ae95016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 577c8bd6f8c69073cfdd7acd4a87e7ae603d48e6
Original-Change-Id: I9aff3f4558e733ff2e47206075533556e400f183
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265535
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9922
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After testing on a final assembly the PD team adjusted the wipeout
request and recovery request modes' colors.
BRANCH=storm
BUG=none
TEST=verified new colors while booting an SP5 device in recovery mode
Change-Id: I9bd2dac63b99140573533c2cda8eaa9213478ab1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41c34a619dc0317af67907f18ee844c71a73d623
Original-Change-Id: Iab84710ebdeed35ddd4a8a163bbb6b8ac9cdb799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262602
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Modify colors as suggested by product review folks. This is not final,
to make it easier to identify RGB locations in the hex dumps, express
their values in decimal as opposed to hex.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified new all three color schemes while pressing the recovery
button at boot for 20 seconds.
Change-Id: I7461acd7004e3d10cba6665a9bfe25ec8aa6f3ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a075824a1954eb5d1b65ce887304924724a6d21
Original-Change-Id: I7f5968e361333572fd1f84aa11b7150194ad902a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261690
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Storm and whirlwind devices should leave developer mode as soon as
recovery is requested.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applies observed desired behavior on
SP5
Change-Id: I3e8e481f85cd067eff4fe2049b8aa47e09f6d63e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c6dbafc16edb11ec687359b25098ce8a1b055b91
Original-Change-Id: Iac6fa62229556bc7a6960d7f1630d37570ba72c4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261621
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The whirlwind device is using a button instead of the switch to enable
dev mode.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applied it is possible to enable and
disable dev mode on Whirlwind and the mode persists over reboots.
Change-Id: I6d31c8429ea0515bea2b7d707325d9092487048a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 495bd07e3a1d6c587a5f01efa2801d2c4e7edbe8
Original-Change-Id: I8879833ca13074e8275393c3b98df06d56a5361d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9875
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The originally loaded blinking program was written to allow gradual
change in LED brightness, which required controlling each LED with its
own engine. In fact there is no need in gradual brightness changes
when the firmware is controlling the ring. This allows to control all
LEDs by one engine, making the code simpler and more robust (no need
to synchronize the three engines any more).
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified that recovery boot WW ring patterns work as expected.
Change-Id: I89d231fb61693f4e834d8d9323ae5a7ddd149525
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 19809cf8120df8865da9b5b9e7b8e932334bf4b5
Original-Change-Id: I41038fd976dc9600f223dc0e9c9602331baf68f9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9873
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The two controllers on the ring are programmed independently, and if
the second controller is running the old pattern while the first one
was loaded with a new pattern, there is a window of when the two
unrelated patterns might interact.
To avoid this shut down execution on both controllers before starting
downloading the new pattern code.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified recovery/wipeout LED ring behavior did not change.
Change-Id: I163f2983d414fe839208054ae3e9025663a46aeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3502ca6b119c033855b45388e7b782d35cfdd82b
Original-Change-Id: I0f71f94a7e82f6c0e7f98d3aad1f93ece207248f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add compiled lp55231 code snippets to allow display certain patterns
when booting the device with the recovery button pressed.
As soon as the press is detected, the low intensify solid white
pattern is enabled. Holding recovery button long enough causes the
device transition between the wipeout requested and recovery requested
states, with the appropriate changes in the displayed pattern.
The patch also includes the source code for the LED controller as well
as instructions on how to compile and modify the code to result in
different colors, intensities, blink periods and duty cycles.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=reboot an SP5 device with the LED ring attached, keep the
recovery button pressed, observe the changes in the LED display
pattern while the device progresses through the boot sequence.
Change-Id: Ic7d45fc7c313b6d21119d4ae6adaeb4f46f7d181
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fd6a5c0067d705197816629f41640a931d2f7cd
Original-Change-Id: Ib5cc5188c2eeedbba128101bf4092a0b9a74e155
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260670
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9870
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The patterns displayed on the LED ring while under the coreboot
control are not driven by the vboot, but by the board code instead,
The four distinct states of the LED display are:
- all off
- recovery button push detected, waiting for it to be released
- wipeout request pending - recovery button was pushed long enough
to trigger this request
- recovery request pending - recovery button was pushed long enough
to trigger this request.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=no functional changes
Change-Id: I38d9a3028013b902a7a67ccd4eb1c5d533bf071c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bdfff0e646283da6a2faaacf33e0179d2fea221c
Original-Change-Id: Ie279151b6060a2888268a2e9a0d4dc22ecaba460
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260649
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9868
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kyösti Mälkki