Commit graph

10 commits

Author SHA1 Message Date
Kyösti Mälkki
399fcdd40d AMD southbridge: remove sp5100
Southbridge SP5100 support was compiled with SB700 code, but static
device info structure would use sp5100/chip.h. To solve this drop
support for separate chip sp5100 and adjust the relevant Kconfig
options.

Removes chip directory:
  src/southbridge/amd/sp5100/

Rename Kconfig option
 from: SOUTHBRIDGE_AMD_SP5100
   to: SOUTHBRIDGE_AMD_SUBTYPE_SP5100

Change-Id: I873c6ad3624ee69165da6ab7287dfb7e006ee8e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/679
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-29 01:42:31 +01:00
Patrick Georgi
0e992be2b7 amd/sb700: Move HAVE_HARD_RESET to southbridge
No in-tree board using that chipset has it not selected, so move
selection from boards to southbridge.

Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/661
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-02-17 22:41:52 +01:00
Patrick Georgi
914377efd6 Get rid of the old romstage-as-bootblock ROM layout
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and
all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n.

This might break a couple of boards on runtime, but so far, fixes were
quite simple.
There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be
adapted.

Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/320
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28 22:17:36 +02:00
Zheng Bao
c3422235b1 SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.
Since the SB700 has changed to sb7xx_51xx, change legacy name in
other mainboard.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28 03:33:10 +00:00
Zheng Bao
bb9bceebc1 Set the ROMSIZE as 4MB.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6178 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-14 01:47:18 +00:00
Uwe Hermann
6e7efb7cab Add TINY_BOOTBLOCK support for AMD SB700.
Factor out the ROM decode enable functionality into bootblock.c and
handle it via the usual TINY_BOOTBLOCK mechanism.

Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10 09:02:50 +00:00
Patrick Georgi
5692c57336 - move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges
- drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05 13:40:31 +00:00
Uwe Hermann
65e60344ad Only show the USB Debug Port kconfig option to the user if a mainboard
is selected that uses a chipset which actually has that functionality _and_
we have code to initialize the Debug Port in coreboot (for that chipset).

Also, remove the duplicate list of PCI IDs and just link to the wiki page at:

  http://www.coreboot.org/EHCI_Debug_Port

The list is now less useful in the kconfig help as this option will only
appear for those boards where it's actually supported.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-26 07:35:55 +00:00
Juhana Helovuo
50b78b66d3 Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed.
Signed-off-by: Juhana Helovuo <juhe@iki.fi>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13 14:43:02 +00:00
Zheng Bao
eff2ffdee8 Features supported in SB700 code:
* SATA initialization.
  * USB initialization.
  * HDA initialization.
  * LPC initialization.
  * IDE initialization.
  * SMBUS initialization.

Note:
1. I tried to add the description of every step to the code. For example,
   if it is made based on rpr, section 2.4.5, I will pasted the words
   from 2.4.5 to the c code. But the document I worked with might be
   different with the most updated one. A new section has been added and
   the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I
   correct every comment if I met one. But I have to confess that I am so
   reluctant to find out everyone. I believe it will be correct in the long
   run.
2. I only test the SATA port 0-3. The ports 4, 5 are "PATA emulations".
   I am confused about it.
3. This patch is not only about SB700. Actually it should be
   SB7x0. But I dont think it is nice to change everything to
   SB7x0. It is ugly, isn't it. As far as I know, they all use the
   same code with revision checking. If you guys think it is
   appropriate, please modify it to sb7x0.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16 01:38:54 +00:00