Commit Graph

132 Commits

Author SHA1 Message Date
Carl-Daniel Hailfinger 3b408fd237 Add support for ST M25P80 chips to flashrom. Detection was tested.
Print status register before erase to help debugging block locks.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3008 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-16 21:15:27 +00:00
Frederico Silva 850c01cacf Add support for more atmel chips:
AT49F002
AT49F002N
AT49F002T
AT49F002NT

Only tested the read function on AT49F002T.
datasheet @ http://www.atmel.com/atmel/acrobat/doc1017.pdf

Signed-off-by: Frederico Silva <frederico.silva@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3003 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-10 16:57:59 +00:00
Uwe Hermann 186a3875dc Various coding style fixes, constification, fixed typos (trivial).
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-04 21:49:06 +00:00
Jonathan A. Kollasch d795b9a9ec Add board-enable for Acorp 6A815EPD.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2995 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-02 19:03:23 +00:00
Lane Brooks 9fe02e8c65 [LinuxBIOS] flashrom support for AMD Geode CS5536
Attached is a patch that enables AMD Geode CS5536 chipset support.  I
have tested it successfully on a MSM800 board from digital logic.

Signed-off-by: Lane Brooks <lbrooks@mit.edu>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13 16:45:22 +00:00
Carl-Daniel Hailfinger 6d6146c377 Fix ATMEL 29C020 detection with flashrom. The JEDEC probe routine had
a delay of 10 us after entering ID mode and this was insufficient for
the 29C020. The data sheet claims we have to wait 10 ms, but tests have
shown that 20 us suffice. Allow for variations in chip delays with a
factor of 2 safety margin.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13 14:56:54 +00:00
Uwe Hermann 825c809efe Add support for Intel 440MX systems.
Add support for the Fujitsu MBM29F400TC flash part.

Detection and reading works, writing is not tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2903 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30 00:56:50 +00:00
Peter Lemenkov 5384dac57e Added Am29LV040B
Looking through the sources of Uniflash utility I found that this chip
is no more no less than low-voltage variant of Am29F040B but with
different ID.

So I created a very quick patch (attached).

Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2897 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-25 04:11:11 +00:00
Peter Lemenkov 2ef39274a3 Flashrom: Add more Vendor IDs and ensure correct sorting in flash.h.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2884 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22 20:36:16 +00:00
Carl-Daniel Hailfinger c4a0b911d1 Introduce block and sector erase routines to flashrom, but do not use
them yet.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2881 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22 16:15:28 +00:00
Carl-Daniel Hailfinger bd7602314b Remove hardcoded wait from SPI write/erase routines and check the chip
status register instead.
This has been tested by Harald Gutmann <harald.gutmann@gmx.net> with a
MX25L4005 chip.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 17:56:42 +00:00
Uwe Hermann 69a392b5c6 Documentation fixes and updates (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 00:29:05 +00:00
Carl-Daniel Hailfinger 79aa01a6c3 Add generic SPI flash erase and write support to flashrom. The first
chip the code was tested and verified with is the Macronix MX25L4005,
but other chips should work as well.
Timeouts are still hardcoded to data sheet maxima, but the status
register checking code is already there.
Thanks to Harald Gutmann for the initial code on which this is loosely
based.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2874 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 00:24:07 +00:00
Uwe Hermann dcb9abdf4c Some cosmetic cleanups in the flashrom code and output.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17 23:55:15 +00:00
Carl-Daniel Hailfinger 84453c02f7 Fix wrong values/typos in chipset_enable.c. This has been confirmed by
Ed Swierk in
http://www.mail-archive.com/linuxbios@linuxbios.org/msg09788.html .

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17 22:30:07 +00:00
Uwe Hermann f8dabccdbf Multiple flashrom fixes:
- Install binary in /usr/sbin (not /usr/bin), as it's a root-only tool.

 - Rename manpage from flashrom.1 to flashrom.8, as section 8 contains
   "System administration commands (usually only for root)".

 - Actually install the manpage upon 'make install'.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2866 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 23:36:34 +00:00
Michael van der Kolff e62537a948 Add Gigabyte M61P-S3 SPI flash support to board_enable.c
Signed-off-by: Michael van der Kolff <mvanderkolff@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2864 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 21:18:43 +00:00
Carl-Daniel Hailfinger 259aaf00f5 Convert the existing it8716f_* functions to generic_spi_* functions by
applying abstraction and wrapping.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2863 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 21:09:06 +00:00
Carl-Daniel Hailfinger 16f6171eda (forgot to add spi.c)
Move SPI code out of board_enable.c where it started its life. The SPI
chip finding and SPI chip accessor code is moved as well. This can be
split later if we feel like it.

The non-use of svn cp is intentional because the only history we'd have
to preserve are a few commits which were early prototypes of chip
identification code. For those who intend to look at that history, they
can look at board_enable.c revision 2853.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2858 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-15 21:45:29 +00:00
Carl-Daniel Hailfinger a28edc524b Move SPI code out of board_enable.c where it started its life. The SPI
chip finding and SPI chip accessor code is moved as well. This can be
split later if we feel like it.

The non-use of svn cp is intentional because the only history we'd have
to preserve are a few commits which were early prototypes of chip
identification code. For those who intend to look at that history, they
can look at board_enable.c revision 2853.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2857 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-15 21:44:47 +00:00
Ronald G. Minnich c63643dc90 Changes to flashrom to support the K8N-NEO3, first tested at Google on GSOC day :-)
Also minor changes to remove tab-space combinations where possible. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Index: jedec.c
===================================================================
--- jedec.c	(revision 2847)
+++ jedec.c	(working copy)
@@ -281,7 +281,7 @@
 	// dumb check if erase was successful.
 	for (i = 0; i < total_size; i++) {
 		if (bios[i] != (uint8_t) 0xff) {
-			printf("ERASE FAILED\n");
+			printf("ERASE FAILED @%d, val %02x\n", i, bios[i]);
 			return -1;
 		}
 	}
Index: board_enable.c
===================================================================
--- board_enable.c	(revision 2847)
+++ board_enable.c	(working copy)
@@ -153,7 +153,8 @@
 		return 1;
 	}
 	/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
-	   We can't use writecnt directly, but have to use a strange encoding */
+	 * We can't use writecnt directly, but have to use a strange encoding 
+	 */ 
 	outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
 	do {
 		busy = inb(port) & 0x80;
@@ -202,43 +203,39 @@
 /*
  * Helper functions for many Winbond Super I/Os of the W836xx range.
  */
-#define W836_INDEX 0x2E
-#define W836_DATA  0x2F
-
 /* Enter extended functions */
-static void w836xx_ext_enter(void)
+static void w836xx_ext_enter(uint16_t port)
 {
-	outb(0x87, W836_INDEX);
-	outb(0x87, W836_INDEX);
+	outb(0x87, port);
+	outb(0x87, port);
 }
 
 /* Leave extended functions */
-static void w836xx_ext_leave(void)
+static void w836xx_ext_leave(uint16_t port)
 {
-	outb(0xAA, W836_INDEX);
+	outb(0xAA, port);
 }
 
 /* General functions for reading/writing Winbond Super I/Os. */
-static unsigned char wbsio_read(unsigned char index)
+static unsigned char wbsio_read(uint16_t index, uint8_t reg)
 {
-	outb(index, W836_INDEX);
-	return inb(W836_DATA);
+	outb(reg, index);
+	return inb(index+1);
 }
 
-static void wbsio_write(unsigned char index, unsigned char data)
+static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
 {
-	outb(index, W836_INDEX);
-	outb(data, W836_DATA);
+	outb(reg, index);
+	outb(data, index+1);
 }
 
-static void wbsio_mask(unsigned char index, unsigned char data,
-		       unsigned char mask)
+static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
 {
-	unsigned char tmp;
+	uint8_t tmp;
 
-	outb(index, W836_INDEX);
-	tmp = inb(W836_DATA) & ~mask;
-	outb(tmp | (data & mask), W836_DATA);
+	outb(reg, index);
+	tmp = inb(index+1) & ~mask;
+	outb(tmp | (data & mask), index+1);
 }
 
 /**
@@ -248,37 +245,80 @@
  *  - Agami Aruma
  *  - IWILL DK8-HTX
  */
-static int w83627hf_gpio24_raise(const char *name)
+static int w83627hf_gpio24_raise(uint16_t index, const char *name)
 {
-	w836xx_ext_enter();
+	w836xx_ext_enter(index);
 
 	/* Is this the w83627hf? */
-	if (wbsio_read(0x20) != 0x52) {	/* SIO device ID register */
+	if (wbsio_read(index, 0x20) != 0x52) {	/* Super I/O device ID register */
 		fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
-			name, wbsio_read(0x20));
-		w836xx_ext_leave();
+			name, wbsio_read(index, 0x20));
+		w836xx_ext_leave(index);
 		return -1;
 	}
 
 	/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
-	wbsio_mask(0x2B, 0x10, 0x10);
+	wbsio_mask(index, 0x2B, 0x10, 0x10);
 
-	wbsio_write(0x07, 0x08);	/* Select logical device 8: GPIO port 2 */
+	wbsio_write(index, 0x07, 0x08);	/* Select logical device 8: GPIO port 2 */
 
-	wbsio_mask(0x30, 0x01, 0x01);	/* Activate logical device. */
+	wbsio_mask(index, 0x30, 0x01, 0x01);	/* Activate logical device. */
 
-	wbsio_mask(0xF0, 0x00, 0x10);	/* GPIO24 -> output */
+	wbsio_mask(index, 0xF0, 0x00, 0x10);	/* GPIO24 -> output */
 
-	wbsio_mask(0xF2, 0x00, 0x10);	/* Clear GPIO24 inversion */
+	wbsio_mask(index, 0xF2, 0x00, 0x10);	/* Clear GPIO24 inversion */
 
-	wbsio_mask(0xF1, 0x10, 0x10);	/* Raise GPIO24 */
+	wbsio_mask(index, 0xF1, 0x10, 0x10);	/* Raise GPIO24 */
 
-	w836xx_ext_leave();
+	w836xx_ext_leave(index);
 
 	return 0;
 }
 
+static int w83627hf_gpio24_raise_2e(const char *name)
+{
+	return w83627hf_gpio24_raise(0x2d, name);
+}
+
 /**
+ * Winbond W83627THF: GPIO 4, bit 4
+ *
+ * Suited for:
+ *  - MSI K8N-NEO3
+ */
+static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
+{
+	w836xx_ext_enter(index);
+	/* Is this the w83627thf? */
+	if (wbsio_read(index, 0x20) != 0x82) {	/* Super I/O device ID register */
+		fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
+			name, wbsio_read(index, 0x20));
+		w836xx_ext_leave(index);
+		return -1;
+	}
+
+	/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
+
+	wbsio_write(index, 0x07, 0x09);	/* Select logical device 9: GPIO port 4 */
+
+	wbsio_mask(index, 0x30, 0x02, 0x02);	/* Activate logical device. */
+
+	wbsio_mask(index, 0xF4, 0x00, 0x10);	/* GPIO4 bit 4 -> output */
+
+	wbsio_mask(index, 0xF6, 0x00, 0x10);	/* Clear GPIO4 bit 4 inversion */
+
+	wbsio_mask(index, 0xF5, 0x10, 0x10);	/* Raise GPIO4 bit 4 */
+
+	w836xx_ext_leave(index);
+
+	return 0;
+}
+
+static int w83627thf_gpio4_4_raise_4e(const char *name)
+{
+	return w83627thf_gpio4_4_raise(0x4E, name);
+}
+/**
  * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
  *
  * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there.
@@ -335,12 +375,12 @@
 	pci_write_byte(dev, 0x59, val);
 
 	/* Raise ROM MEMW# line on Winbond w83697 SuperIO */
-	w836xx_ext_enter();
+	w836xx_ext_enter(0x2E);
 
-	if (!(wbsio_read(0x24) & 0x02))	/* flash rom enabled? */
-		wbsio_mask(0x24, 0x08, 0x08);	/* enable MEMW# */
+	if (!(wbsio_read(0x2E, 0x24) & 0x02))	/* flash rom enabled? */
+		wbsio_mask(0x2E, 0x24, 0x08, 0x08);	/* enable MEMW# */
 
-	w836xx_ext_leave();
+	w836xx_ext_leave(0x2E);
 
 	return 0;
 }
@@ -487,9 +527,11 @@
 	{0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 	 "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash},
 	{0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-	 "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise},
+	 "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e},
+	{0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	 "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e},
 	{0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
-	 "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise},
+	 "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e},
 	{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01,
 	 NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m},
 	{0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118,
@@ -509,8 +551,8 @@
  * Match boards on LinuxBIOS table gathered vendor and part name.
  * Require main PCI IDs to match too as extra safety.
  */
-static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
-							     char *part)
+static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, 
+								char *part)
 {
 	struct board_pciid_enable *board = board_pciid_enables;
 
@@ -525,10 +567,11 @@
 			continue;
 
 		if (board->second_vendor &&
-		    !pci_dev_find(board->second_vendor, board->second_device))
+			!pci_dev_find(board->second_vendor, board->second_device))
 			continue;
 		return board;
 	}
+	printf("NOT FOUND %s:%s\n", vendor, part);
 	return NULL;
 }
 
@@ -545,20 +588,20 @@
 			continue;
 
 		if (!pci_card_find(board->first_vendor, board->first_device,
-				   board->first_card_vendor,
-				   board->first_card_device))
+					board->first_card_vendor,
+					board->first_card_device))
 			continue;
 
 		if (board->second_vendor) {
 			if (board->second_card_vendor) {
 				if (!pci_card_find(board->second_vendor,
-						   board->second_device,
-						   board->second_card_vendor,
-						   board->second_card_device))
+						board->second_device,
+						board->second_card_vendor,
+						board->second_card_device))
 					continue;
 			} else {
 				if (!pci_dev_find(board->second_vendor,
-						  board->second_device))
+							board->second_device))
 					continue;
 			}
 		}
@@ -582,7 +625,7 @@
 
 	if (board) {
 		printf("Found board \"%s\": Enabling flash write... ",
-		       board->name);
+			board->name);
 
 		ret = board->enable(board->name);
 		if (ret)


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2850 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-12 21:22:40 +00:00
Uwe Hermann f904a596d0 Revert my last cleanup patch.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-10 17:42:20 +00:00
Uwe Hermann 5982a0641b Cosmetic changes to make the flashrom output more consistent (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2846 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-10 16:31:30 +00:00
Jordan Crouse 573ff508ab [FLASHROM] Fix the help, and print a message when nothing happens
The help implied that writes happen by default, which they don't.  Fix
the text, and say something when we dont specify any commands.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>    
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2820 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-04 06:26:41 +00:00
Carl-Daniel Hailfinger 0de6f0a36f This patch aims to restructure SPI flash support in a more reasonable
way. It introduces a generic SPI host driver for the IT8716F Super I/O
which will enable easy SPI programming without having to care for the
peculiarities of the SPI host.

To activate probing for the IT8716F, you have to use the gigabyte:m57sli
mainboard override. SPI support will then use the gathered SPI host data
to access the SPI flash.

This has been tested sucessfully by Ward Vandewege <ward@gnu.org> on the
GA-M57SLI v2.0, which has a MX25L4005 SPI flash part.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2817 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-02 15:49:25 +00:00
Carl-Daniel Hailfinger 7fe8f5da4d Add preliminary SPI flash identification support for SPI chips attached
to ITE IT8716F Super I/O. Right now this is hardcoded to the Gigabyte
M57SLI board. It works only with rev 2.0 of the board, but it will bail
out on earlier versions, so no damage can occur.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2811 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-27 14:29:57 +00:00
Alex Beregszaszi 7798c888e8 Change out/in combinations to pci_read/write_byte in
sis630 chipset enable.

Signed-off-by: Alex Beregszaszi <alex@rtfs.hu>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2770 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-11 15:58:18 +00:00
Uwe Hermann f9b0f7fd91 Remove useless 'extern' keywords (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2769 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09 20:24:29 +00:00
Uwe Hermann 863c1bf525 Add '(C)' where it's missing (for consistency reasons).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2768 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09 20:21:05 +00:00
Uwe Hermann 09735cb517 Add missing license header to udelay.c.
I'm self-ack'ing this, as the origin of the code in udelay.c (and thus
the license and copyright owner) is pretty clear.

The code which is now in udelay.c was split out from flash_rom.c in r1428,
and flash_rom.c, in turn, has been around since the beginning and had a
'Copyright 2000 Silicon Integrated System Corporation' line as well as the
usual GPLv2-or-later license header.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2767 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09 20:02:45 +00:00
Uwe Hermann 9398958cfa Add a copy of the GPL in the flashrom repository as it's an independent
project (being packaged by distros, among other things).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2764 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-08 14:36:01 +00:00
Markus Boas 736c1d8618 Add support for the Winbond W29EE011.
Signed-off-by: Markus Boas <ryven@ryven.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2753 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-30 10:17:50 +00:00
Markus Boas 3b78de6887 Add support for the Winbond W29C040P.
Signed-off-by: Markus Boas <ryven@ryven.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2752 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-30 10:11:08 +00:00
Uwe Hermann 6c71f73786 Change all flashrom license headers to use our standard format.
No changes in content of the files.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-29 17:52:32 +00:00
Uwe Hermann ba9ce9f7f9 Cosmetic fixes (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 16:08:21 +00:00
Uwe Hermann 0a6bb91062 Drop duplicated code (copies of plain JEDEC functions).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2747 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 15:20:38 +00:00
Uwe Hermann 2fe239134c Drop a bunch of useless header files, merge them into flash.h.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2746 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 13:34:59 +00:00
Uwe Hermann 3a9bbc2cc8 Move code into *.c files, there's no reason to have it in header files.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2745 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 10:20:40 +00:00
Ed Swierk 3436698b6a Fix bug in probe_28sf040() causing flash corruption on SST49LF160C verify.
The first byte of the flash chip was read at the start of the function
and later written back to address 0 if the flash chip was not identified
as SST28SF040, which means most of the time. This write caused corruption
of flash contents when verifying a SST49LF160C part.

Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-13 04:10:32 +00:00
Luc Verhaegen 4d43255bef flashrom: Add board enable for the EPoX EP-BX3.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-11 16:59:11 +00:00
Uwe Hermann 7ab22686b8 flashrom: Add missing supported flash chips to the README (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2742 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-27 03:32:45 +00:00
Carl-Daniel Hailfinger ae293d74f9 This patch adds support for the M50FLW040A, M50FLW040B, M50FLW080A,
M50FLW080B, M50FW080, M50FW016, M50LPW116, M29W010B flash chips made
by ST to flashrom.

The patch is based on the data sheets of the chips and has not been
tested at all.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2741 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-25 17:55:45 +00:00
Carl-Daniel Hailfinger 3a262082ba This patch adds support for ST M50FW040 and ST M29W040B to flashrom.
Only reading from the chips was tested; writing support is untested.

Thanks to Gürkan Sengün <gurkan@linuks.mine.nu> for testing!

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2740 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-24 18:18:05 +00:00
Luc Verhaegen 9bcad23ba1 Flashrom: Add support for Tyan Tomcat K7M.
Same board enable as Asus A7V8-MX. Tested by Reinhard Max.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2732 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-04 17:51:49 +00:00
Uwe Hermann e29a664b54 Fix up and document the AMD CS5530/CS5530A support in flashrom.
The previous code was pretty unreadable, undocumented and did some totally
unrelated things (such as mucking with the game port or port 0x92).

This version is tested with a 256 KB chip and should work for the
CS5530 and CS5530A.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2715 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-06 21:35:45 +00:00
Uwe Hermann 6602070955 flashrom: Document the newly supported IBM x3455 board and the
now-supported Broadcom HT-1000 chipset (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-05 15:02:18 +00:00
Stefan Reinauer 5e2a42ae32 Move GPIO settings to board specific code for IBM x3455
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-05 12:51:52 +00:00
Stefan Reinauer 444e39ee6d Add support for BCM HT1000 chipset to flashrom. Tested on IBM x3455.
(trivial)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-05 10:28:39 +00:00
Uwe Hermann da0eec07fb Minor cosmetics (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2696 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-24 19:17:29 +00:00
Stefan Reinauer 1bccabc16c drop leftover includes (trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2693 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-24 09:26:39 +00:00