This is necessary to make sure that bootblock uses the default CBFS
header (as it ought to) when multiple CBFS images support is enabled.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest of the patches applied storm boots all the way inot
the Linux prompt
Change-Id: I5e029d95c5cb085794c7bf5f44513b2144661e38
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 75b2c2ef6c8287db7c3e5879cacfd5dcba4391ac
Original-Change-Id: I5c352921b4c9b6a3294f4658d174e0842d2ee365
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237661
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is the intialization code specific to the Winbond
W972GG6JB-25 part using Synopsys DDR uMCTL and DDR Phy.
This is DDR2 initialization code only (currently present
on the bring up board). DDR3 initialization code will follow
for boards having DDR3 memory.
The programming procedure that is executed at power up to bring
up the uMCTL, PHY and memories into a state where reads and
writes to the memory can be performed is the following:
1. uPCTL (Universal DDR protocol controller) initialization
The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH
needed for driving the memory power-up sequence are programmed
as a function of the internal timers clock frequency.
Organization (memory chip specific) values are set
(column/bank/row address width and number of ranks), together
with other static values (latency, timing, power up configuration).
All these values are static, provided by the datasheet,
being determined by the memory type, size and frequency.
2. PHY initialization
The PHY is programmed with datasheet provided values,
specifying the initialization values for it to send to the
external memory (timing parameters).
Also, delay lines (DLL) and strength of drive pads are
calibrated (based on external conditions: temperature,
voltage, noise) and locked. After that, the PHY goes
through a trainig process (also dependent on the
current conditions at boot time) to establish precise
timing configuration between the DDR clock and DQS (data strobe)
and between DQS and DQ (data).
3. Memory power up
4. Switch from configuration state to access state.
BUG=chrome-os-partner:31438, chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly
DDR2 is also tested during chip sort.
Corner cases (performace of DDR in different conditions)
will be tested after the chip reaches a stable state.
BRANCH=none
Change-Id: I0093dc175d064aad03052d5281679b008c1bf012
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d0bacea0fd5bd3b12008b47e80de8398f447785
Original-Change-Id: I8437db6c84d77c4c51a3ee2b09cd3d14913c0d16
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241424
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9769
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
broadcom cygnus hangs if we clean caches by dcache_clean_invalidate_all
at bootblock entry point. this change makes startup code call
dcache_invalidate_all instead.
other boards theoretically should not be affected as long as maskrom
does not hand off execution to bootblock with dirty cache.
BUG=chrome-os-partner:36648,chrome-os-partner:36691
BRANCH=broadcom-firmware
TEST=boot cygnus b0 board, messages were printed on console:
coreboot-688aae9-dirty bootblock Mon Feb 9 13:21:02 PST 2015
starting...
Exception handlers installed.
Change-Id: I05777ca525c97bb3d7cbb5ea7e872a602dcd5a19
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59de5328df9d0502a3b3f7c624d3e86e038de50e
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I9b8850846b941e7e62712e90cc28ad14a68da393
Original-Reviewed-on: https://chromium-review.googlesource.com/251304
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9762
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Storm devices' recovery button is overloaded. Pressing it when the
system is running is supposed to reset the device. To trigger recovery
mode the button must be held pressed for at least 5 seconds after
reset.
Currently interpreting the recovery button state is the responsibility
of the board (vboot gets a consolidated state, which is a combination
of several conditions), so the simplest way to implement this feature
is to make the board follow the recovery button state.
In case the button is not pressed when it is first sampled, its state
is saved immediately and no recovery request is reported. In case the
button is pressed when it is first sampled, the board code keeps
polling it up to 5 seconds and acts accordingly.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=tried starting a whirlwind with recovery button pressed for
various durations, it entered recovery mode when the button was
pressed longer than 5 seconds.
Change-Id: Icb3250be7c2a76089c070acd68cb521d1399e245
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45e7265bc760944f93dd98903d39d2b30aa96365
Original-Change-Id: Iab3609ebce3a74e3d0270775b83f3cf03a8837ca
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/251711
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GSBI driver is extended to be able to program the CTRL reg for any given
GSBI block. The NS and MD registers programming is made more readable by
programming the M, N, D and other bits of the registers individually.
Defined configure structs for each QUP block to be able to track the init
status for each qup.
Configured GPIO8 and GPIO9 for I2C fuction.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:36722
TEST=Booted up storm P0.2, verified that the TPM on GSBI1 still works.
Change-Id: I17906beedef5c80267cf114892080b121902210a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07bc79211770decc1070c3a88874a4e452b8f5bc
Original-Change-Id: I841d0d419f7339f5e5cb3385da98786eb18252ad
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/250763
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Trybot-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a clock control driver to initialize the clock tree inside the
low-power audio subsystem. Depthcharge builds up on this to enable
audio function on storm.
The clock is hardcoded for 48KHz frame rate, two 16 bit channels.
BRANCH=storm
BUG=chrome-os-partner:35247
TEST=with depthcharge patches applied and Using depthcharge CLI audio
test program verified that the target generates sensible sounds
audio 100 100
audio 1000 5000
Change-Id: I56513fc782657ade99b6e43b2d5d3141d27ecc4e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0d4f408408aa38b2f0ee19b83ed490de39074760
Original-Change-Id: If8ffc326698fcea17e05d536930d927ca553481f
Original-Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248830
Original-Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: http://review.coreboot.org/9758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds the necessary platform glue to allow the use of
software-driven I2C bit banging on the RK3288. This is just a debugging
feature that can be used to reproduce certain I2C failure cases.
Also fix Makefile verstage linking for the feature and add some new
rk3288 IOMUX macros as needed.
BRANCH=None
BUG=None
TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry,
wrapped Jerry's bootblock and verstage in software_i2c_attach/detach()
calls, confirmed that both PMIC and TPM could be driven correctly with
software I2C driver. Tried out different combinations of
software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and
observed transfer results with the hardware controller after reboot...
the worst that would happen is that the first register read-modify-write
(DCDC_ILMAX) would fail to read, but all later transfers would be fine.
Since that register is written twice (due to current BUCK1 ramp
implementation) and is not terribily important anyway, I think we don't
need to worry about wedging problems.
Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487
Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247890
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This brings brain, danger, and rialto up to parity with other
veyron platforms as far as eventlog functionality is concerned.
BUG=chrome-os-partner:34436
BRANCH=none
TEST="mosys eventlog list" shows events (tested on Brain)
Change-Id: I186c5d18e5351c0eaf08ffecfd87506283c44b19
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1764bc53147718031231a6d125a4a1a96c4c6a8f
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ief09299965f6f21bc5a40cef31cde61344025c2a
Original-Reviewed-on: https://chromium-review.googlesource.com/239979
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9755
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This applies a previous patch ("chromeos: Provide common watchdog
reboot support") to some veyron platforms that were missing it.
BUG=none
BRANCH=none
TEST=built and booted on Brain
Change-Id: I3eb431a57367b8f885844e4353a78f77515f5195
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b0c87dd4217917a35817c719efe43dd4ec442df0
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I2861939655a995d309847f64cecd974a740fae37
Original-Reviewed-on: https://chromium-review.googlesource.com/245633
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9754
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
we will use dvs to adjust the voltage in kernel, if device reset
by watchdog in kernel, the dvs gpio may not reset, and we use the
i2c to adjust rk808 voltage in coreboot, so it may failure. so we
move the reboot_from_watchdog() before the rk808 setting.
BUG=None
TEST=Boot from speedy
BRANCH=None
Change-Id: I809c63153d49680d9c84462aafd7bae09106fa6e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76efb4b0196eecc84664a4c5dce2221152a39c0a
Original-Change-Id: I92b5c6413bbffe30566178de89df1f9683790982
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/244289
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Many ChromeOS devices use a GPIO to reset the system, in order to
guarantee that the TPM cannot be reset without also resetting the CPU.
Often chipset/SoC hardware watchdogs trigger some kind of built-in
CPU reset, bypassing this GPIO and thus leaving the TPM locked. These
ChromeOS devices need to detect that condition in their bootblock and
trigger a second (proper) reboot.
This patch adds some code to generalize this previously
mainboard-specific functionality and uses it on Veyron boards. It also
provides some code to add the proper eventlog entry for a watchdog
reset. Since the second reboot has to happen before firmware
verification and the eventlog is usually only initialized afterwards, we
provide the functionality to place a tombstone in a memlayout-defined
location (which could be SRAM or some MMIO register that is preserved
across reboots).
[pg: Integrates
'mips: Temporarily work around build error caused by <arch/io.h> mismatch]
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Run 'mem w 0xff800000 0x9' on a Jerry, watch how a "Hardware
watchdog reset" event appears in the eventlog after the reboot.
Change-Id: I0a33820b236c9328b2f9b20905b69cb934326f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fffc484bb89f5129d62739dcb44d08d7f5b30b33
Original-Change-Id: I7ee1d02676e9159794d29e033d71c09fdf4620fd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: c919c72ddc9d2e1e18858c0bf49c0ce79f2bc506
Original-Change-Id: I509c842d3393bd810e89ebdf0dc745275c120c1d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242504
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9749
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:34436
BRANCH=none
TEST=Built and booted on pinky w/ depthcharge fmap patch,
used mosys to verify that eventlog entries get populated:
entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096"
entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0"
entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode"
Change-Id: I74ba8b271328453c8b91f11e7858754a80806c31
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 197010f057f4835a30ed2e71f47ca51fc181afe4
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I19cb884be5c3e00975599e96e0223e33d32e7c0d
Original-Reviewed-on: https://chromium-review.googlesource.com/238830
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Turns out there are uses for memlayout regions not specific to vboot2.
Rather than add yet another set of headers for a single region, let's
make the vboot2 one common for chromeos.
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Booted Jerry, compiled Blaze, Cosmos, Ryu and Storm.
Change-Id: I228e0ffce1ccc792e7f5f5be6facaaca2650d818
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c6d7aab9f4e6d0cfa12aa0478288e54ec3096d9b
Original-Change-Id: I1dd7d9c4b6ab24de695d42a38913b6d9b952d49b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242630
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9748
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Dependency tracking in incremental builds is currently broken for the
ramstage, due to the intermediate linking step into one ramstage.o file
per directory. The original xxx.ramstage.o files are removed from
ramstage-objs, so they don't end up in allobjs and won't get translated
into DEPENDENCIES. This patch explicitly adds them to DEPENDENCIES
beforehand to resolve the issue.
BRANCH=None
BUG=None
TEST=Built, ran 'touch src/include/cbmem.h' and built again
incrementally. Confirmed that objects dependent on the modified header
such as timestamp.ramstage.o get rebuilt correctly.
Change-Id: I3ba411e4073b38e038445aadceeccfe6c09670c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c57d6a8421a109ee3e87567c9add579f9ae761e
Original-Change-Id: Ife529ad8f5c011456c1e0c380356f1b1bb5047cb
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233571
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The 4 byte offset value will be stored in SRAM and shared between
different coreboot stages.
BRANCH=storm
BUG=chrome-os-partner:3416, chromium:445938
TEST=with the rest of the patches in, storm successfully boots into
Linux login prompt
Change-Id: Id8df75b0c679e274532660d55410291e59f3b520
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8f2f7cf6263f4c2db70b1c87ec67f6b0308059b3
Original-Change-Id: I1ebfada93e222992300cd695d04669988206d4b1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237660
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9744
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This patch introduces a new option (CONFIG_MULTIPLE_CBFS_INSTANCES) to
allow multiple CBFS instances in the bootrom.
When the new option is enabled, the code running on the target
controls which CBFS instance is used. Since all other then header CBFS
structures use relative addressing, the only value which needs
explicit setting is the offset of the CBFS header in the bootrom.
This patch adds a facility to set the CBFS header offset. The offset
value of zero means default. i.e. the CBFS initialization code still
discovers the offset through the value saved at the top of the ROM.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest patches in, storm target successfully boots from RW
section A.
Change-Id: Id8333c9373e61597f0c653c727dcee4ef6a58cd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e57a3a15bba7cdcca4a5d684ed78f8ac6dbbc95e
Original-Change-Id: I4c026389ec4fbaa19bd11b2160202282d2f9283c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237569
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Pistachio UART closely matches 8250, the only difference is that its
register file is mapped to a 32 bit bus.
Provide a function to report register with so that the Coreboot table
entry gets correct value.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: Icd72b115b4f339800d6c8b210a6617398232f806
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e1dc4156949b20efafbca2c19ff424436a400087
Original-Change-Id: Icafb014af338e05bbf1044b791683733685ffab3
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240028
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9740
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I05891a9471a5369d3bfafe90cd0c9b0a7e5a667e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I30b742146069450941164afb04641b967a214d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9738
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There was a recent patch by Deepa Dinamani applied to coreboot's
cache.c which fixed a bug that occurred when icache is on but dcache
is off ("arch: armv7: Fix cache sync instructions."). Although this
bug is not likely to be encountered by the time libpayload is run,
it's worth applying it to keep things in sync.
BUG=none
BRANCH=none
TEST=n/a since we have icache and dcache enabled on all ARM platforms
when libpayload is run.
Change-Id: I83d9f96acb702975585e5d47c90e2ddaca488f6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31f985b58ac9227684fbe27481129ba01fd3ab8a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4ab0d97ef3a97dcd0fa96e10273c3b32486e0b40
Original-Reviewed-on: https://chromium-review.googlesource.com/243276
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
we use Kconfig define sdram size before, but there may use
different sdram size in the same overlay, so we must detect
sdram size at runtime now. If we use 4G byte sdram, we can
use[0x00000000:0xff000000], since the [0xff000000:0xffffffff]
is the register space.
BUG=chrome-os-partner:35521
TEST=Boot from mighty
BRANCH=None
Change-Id: I7a167c268483743c3eaed8b71c7ec545a688270c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ad4f27dd08c467888eee87e3d9c4ab3077751898
Original-Change-Id: Ib32aed50c9cae6db495ff3bab28266de91f3e73b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243139
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I always had that TODO comment in there but I had already forgotten what
I even meant by it. It's really just a simple cleanup... this function
is (currently) veyron-specific and doesn't belong in common code.
BRANCH=veyron
BUG=None
TEST=Booted Jerry.
Change-Id: Iccd6130c90e67b8ee905e188857c99deda966f14
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d188398704575ad2fedc2a715e609521da2332b0
Original-Change-Id: I6ce701a15a6542a615d3d81f70aa71662567d4fa
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241190
Reviewed-on: http://review.coreboot.org/9733
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've traditionally tucked the framebuffer at the end of memory (above
CBMEM) on ARM and declared it reserved through coreboot's resource
allocator. This causes depthcharge to mark this area as reserved in the
kernel's device tree, which may be necessary to avoid display corruption
on handoff but also wastes space that the OS could use instead.
Since rk3288 boards now have proper display shutdown code in
depthcharge, keeping the framebuffer memory reserved across the handoff
(and thus throughout the lifetime of the system) should no longer be
necessary. For now let's just switch the rk3288 implementation to define
it through memlayout instead, which is not communicated through the
coreboot tables and will get treated as normal memory by depthcharge.
Note that this causes it to get wiped in developer/recovery mode, which
should not be a problem because that is done in response to VbInit()
(long before any images are drawn) and 0 is the default value for a
corebootfb anyway (a black pixel).
Eventually, we might want to think about adding more memory types to
coreboot's resource system (e.g. "reserved until kernel handoff", or
something specifically for the frame buffer) to model this situation
better, and maybe merge it with memlayout somehow.
CQ-DEPEND=CL:239470
BRANCH=veyron
BUG=chrome-os-partner:34713
TEST=Booted Jerry, noticed that 'free' now displays 0x7f000 more bytes
than before (curiously not 0x80000 bytes, I guess there's some alignment
waste in the kernel somewhere). Made sure the memory map output from
coreboot looks as expected, there's no visible display corruption in
developer/recovery mode and the 'cbmem' utility still works.
Change-Id: I12b7bfc1b7525f5a08cb7c64f0ff1b174df252d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10afdba54dd5d680acec9cb3fe5b9234e33ca5a2
Original-Change-Id: I1950407d3b734e2845ef31bcef7bc59b96c2ea03
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240819
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9732
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Each type of cache might have different cache line size.
Call the proper get_<*>cache_line function for each cache
type.
Fixes problem with get_L2cache_line which previously
targeted L3 cache line in the config register, instead of
L2 cache.
TODO: add support for tertiary caches and have cache
operations be called per CPU, not per architecture.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; worked as expected;
BRANCH=none
Change-Id: I7de946cbd6bac716e99fe07cb0deb5aa76c84171
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 62e2803c6f2a3ad02dc88f50a4ae2ea00487e3f4
Original-Change-Id: I03071f24aacac1805cfd89e4f44b14ed1c1e984e
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241853
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've decided that it is generally okay for coreboot to expect unaligned
accesses to work. Trying to find all instances of unaligned access
opportunities and working around them in software would be an
unsustainable whack-a-mole contest. Instead, architectures and boards
need to make sure they conform to this, which on ARM and ARM64 requires
setting up paging early in the bootblock.
Other architectures (x86, ARM64, MIPS) already generate code in this
manner. ARM still had an -mno-unaligned-access flag hanging around that
has been copied so many times its initial origin was lost in time
(probably U-Boot). Let's remove it for consistency between architectures
and to improve code generation.
BRANCH=veyron
BUG=None
TEST=Booted Jerry and Blaze. Looked at the disassembly for
timestamp_sync() and confirmed that it only gives you half as much eye
cancer as before (GCC still somehow insists on byte accesses when
zeroing fields which is very odd, but at least that terrible AND/OR mess
is gone). Measured a boot time increase of about 11ms on Jerry (mostly
faster timestamp and CBFS accesses). Could not test Storm because
despite our claimed abundance of test devices, every time I get one of
them it magically disappears again in less than a week.
Change-Id: I8fc08cc7ce4471651a51ee795269909ef69277c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07591fadb89bd127fe065abf0b9ba3facecf1aeb
Original-Change-Id: I1d046e05bb11822b86e467eafb6aa92e8fbce774
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241732
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9728
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: I92b7ff0ce66af8d096ec09a4c900829ef6c867e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9727
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a 10us delay in between (re-)configuring and reading
GPIOs in gpio_base2_value() to give the values stored some time
to update.
As far as I know this hasn't bitten us since the function was
added, but adding a short delay here seems like the right thing
to do.
BUG=none
BRANCH=none
TEST=built and booted on Brain
Change-Id: I869cf375680435ad87729f93d29a623bdf09dfbc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2484900fc9ceba87220a293de8ef20c3b9b20cfd
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I79616a09d8d2ce4e416ffc94e35798dd25a6250d
Original-Reviewed-on: https://chromium-review.googlesource.com/240854
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9725
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The AS3277 RTC code seems to closely follow the corresponding Linux
driver. Unfortunately, while coreboot (and even other parts of Linux,
like mktime()) directly follows the standard IBM PC RTC time
representation (except for the BCD part), Linux' struct rtc_time decided
to use 0-based (instead of 1-based) months instead.
This patch removes the faulty month offset that was copied into our
driver so that we will generate correct timestamps again.
BRANCH=nyan
BUG=chrome-os-partner:34108
TEST=firmware_EventLog (pre-release version) gets further than before
(and then craps up on unrelated problems with suspend/resume events).
Change-Id: Ica221a8bcfd7c1c6cd7ba382d760b586d511e3a3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b55c3f5bbecc776a71338256b910aecccac1e04
Original-Change-Id: I163fa4778ec534cd9e6f92a6b6dc55e9871a6a82
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238122
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9723
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change defines a custom romstage entry for bg4cd. the entry code
stalls subcores, sets up the stack, and clears the bss before jumping to main.
BUG=none
BRANCH=tot
TEST=built all current boards. booted cosmos p1
Change-Id: Idde43f94555bec7804a16928c58ce673956a39e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a35e12eb29b351cc0baaea24344f00d2ba905f6
Original-Change-Id: I9172e873a43847f3ea82cd1d9fd0841f0db83994
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238022
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9722
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change defines stage_entry as a weak symbol so that a board
can implement custom stage entry code.
BUG=none
BRANCH=tot
TEST=built all current boards. booted cosmos p1.
Change-Id: If8f6945ecdc5047558bb6359aa997867e36f33b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 86d5008981d0b01652907baab47a476d784a2ceb
Original-Change-Id: Ib43158c4013e6393d86a9aef37cf444a48b9fc79
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238021
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9721
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current display init code causes Brain to crash when trying
to allocate resources. This just avoids doing display init if a
config variable is set. Once code has been implemented to properly
setup different types of displays we can get rid of this hack.
BUG=none
BRANCH=none
TEST=built and booted (to depthcharge) on Brain, compiled for
pinky with FEATURES=noclean and ensured config variable is 0
Change-Id: I9a7266c6bff5b7a6eb05b2b21fb65797bee392d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 804632ca67eaaf4174ca597d83b8923cb9abd1b7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I04c9e8181c58fa0608fd20776fa8c4798a023474
Original-Reviewed-on: https://chromium-review.googlesource.com/235922
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9720
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch activates the chip driver for Winbond SPI flash (which,
incidentally, looks 99.9% the same as the Gigadevice driver but still
requires some extra 500+ bytes of object code... there's definitely room
for improvement here). Shuffle around rk3288 memlayout to make a little
more room in the bootblock.
BRANCH=veyron
BUG=chrome-os-partner:34176
TEST=Booted Pinky. Checked bootblock and verstage memsz of final binary
and noticed that both only have less than 500 bytes left against their
memlayout boundary. The next piece of code we add will cause some
serious headaches...
Change-Id: I97ea6ac334104e4219e310afc557c164b2ff19d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8769e5a34ad3cd417132646fbb58ff51c29fb640
Original-Change-Id: Id2f1204c30aa28251cf85cb80d7ca44947388dba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236977
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9719
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
we use the delay 200ms to meet the edp power timing request before,
it waste time, so we use the HPD function to detect the edp panel now.
In previous version, the hardware may not support the edp HPD function,
so in the code it will spend 200ms to detect hpd single, if it don't get
the hpd single, it will contiue the edp initialization process, to compatible
all of the hardware version.
BUG=chrome-os-partner:35623
TEST=Boot from Mighty, and display normal
BRANCH=None
Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6
Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242792
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: http://review.coreboot.org/9659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
backlight timing: LED_VCC->LED_PWM->LED_EN, we modify the
code to meet the timing.
BUG=chrome-os-partner:36201
TEST=Boot from jerry, and scope the backlight timing
BRANCH=None
Change-Id: I6bfa6af176400086e4af0112a63127c1152ca70e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 52ac0b2944cea7dc860bfea12fe44851436bb7f7
Original-Change-Id: I6c53a822410ad706383c6d9fa2b5f0437775f710
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/244639
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The recovery button on Rialto should be GPIO 255, the LED Push Key.
Note we want to keep the recovery button on servo functional because
many protos are not assembled and developers can't "push" the push key.
The GPIO passed to payloads (and kernel) is only mapped to Push Key.
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
BRANCH=veyron_rialto
Change-Id: I66f94cf232caa53a3b28db517620e4b6e9b9af0e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66ee55f6312efaeb337eb2881cd5eff5365b4105
Original-Change-Id: I0a7ebeed6506fbd938084c9a078a7cf1c7b914b9
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244515
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The FMAP for Rialto has no ecrwhash and would cause verstage to
incorrectly load ramstage (instead of romstage) when looking for
subsection inside RW blob.
We have to override the index of stages to boot correctly.
BRANCH=veyron_rialto
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
Boots successfully on Rialto boards.
Change-Id: I031703d97a68e42dc17630ab5df85f8cba47e5e5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24ba4b16b4a2fe5469296f8d40286ed926cefc3c
Original-Change-Id: I637ea23e1e8265781e52367d1306dbf854c2ccad
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244577
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Our use of the bucks may exceed their default maximum inductor current.
Just set it to the highest possible value for every buck we configure to
avoid problems... the kernel can later fine-tune the values further if
needed. (Also some slight grammar updates while I'm in there.)
BRANCH=veyron
TEST=Build and Boot on Jerry
BUG=None
Change-Id: If8258cf4feefe191604365405bff1f20c8ab8746
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 065a163bb902b8c96d05bfef6ed4885aa20f31cc
Original-Change-Id: I3801cabeb93d7bf7ecc02db0e69d4932c9394db9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242785
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: http://review.coreboot.org/9655
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
tMRD request 10nCK in LPDDR3, we set the DDR_PCTL_TMRD BIT0~BIT2 to generate
this signal, but the max value we can set is 7, so the standard can not be met.
So, now we send the Mode Register Set command manually, and hence we can add
the delay manually.
BUG=chrome-os-partner:34608
TEST=loop reboot
BRANCH=veyron
Change-Id: Id974ab935c2df6ea35dcdd240378ffc68de0204d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b60a4de6ff3ad3720c2c06ed7de03ed942360e6c
Original-Change-Id: I0d29ea9cd82ef018e835ae53090a47d0299ef61d
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242176
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9654
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We want a reset signal to last 200us. The length of a reset signal is
represented by BIT0~BIT16 in DDR_PUBL_PTR2. When DDR memory runs at
667MHz, the calculated value for the reset signal is 0x20850, which is
bigger than the maximum value that can be described with 17 bits
(0x1ffff). As a result, the memory controller only sees 0x850, which
generates a 3.5us reset cycle instead, which violates the standard and
negatively impacts memory stability.
So instead, we now set it to the maximum value (0x1ffff) to prevent this
overflow, resulting in a reset signal of 196us for 667MHz DDR memory.
BUG=chrome-os-partner:34875
TEST=loop reboot
BRANCH=veyron
Change-Id: Ia01f8a0414b49fa3ecf4d543cfa1822e29ee4cc4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 767a4a3cb8dff47cb15064d335b78ffa5815914d
Original-Change-Id: I9b410e1605c87f12a5ca96ead12f8527ca4f417f
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242175
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Vadim Bendebury