Implement VOP and eDP drivers, vop and edp clock configuration,
framebuffer allocation and display configuration logic.
The eDP driver reads panel EDID to determine panel dimensions
and the pixel clock used by the VOP.
The pixel clock is generating using the NPLL.
BUG=chrome-os-partner:31897
TEST=Booted Veyron Pinky and display normal
BRANCH=None
Change-Id: I01b5c347a3433a108806aec61aa3a875cab8c129
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4f863b0b57f2f5293ea8015db86cf7f8acc5853
Original-Change-Id: I61214f55e96bc1dcda9b0f700e5db11e49e5e533
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Like most newer Chromebooks, Pinky and Jerry do not have physical
dev switches.
BUG=chrome-os-partner:33395
BRANCH=none
TEST=built and booted on Pinky, crossystem prints a valid value for
devsw_cur instead of an error.
Change-Id: If97ffa6f99eb31c05915f3ee82aaf6bd252d29e4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db302d7286d3e7df9442928dac1d611a2c103163
Original-Change-Id: I186518a59699d293c7938221b3ae45b27361c255
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229680
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9552
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for Pinky rev3 (board ID 2) and Jerry rev2: the
power button GPIO changed polarity to low, the 5V_DRV pin for USB power
was moved to the AP again (welcome back!), and the EMMC_RST_L is now
finally on a port with the right IO voltage so we don't need any weird
pull-up tricks anymore. Since there are very few Jerry rev1s around,
we'll just move it over to the new code directly without introducing
board ID differences (also, because I have no idea how they stuffed it
this time... is this one actually called rev2?).
BRANCH=None
BUG=None
TEST=Still boots on my Pinky rev2, though that doesn't say much.
Change-Id: Id11044cedcaac5a4ae07e696893823925107a6db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 55344a9518ff04edcef01bcd40817e9e4b613717
Original-Change-Id: Iddee360fbda357ecde4ae5fbb5c3a01fe0c22474
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229010
Original-Reviewed-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch ports commit 567f616f (rk3288: slowly raise to max cpu
voltage to prevent overshoot) to Veyron_Jerry. It also fixes include
ordering and some comment grammar in the affected code.
BRANCH=None
BUG=chrome-os-partner:32716
TEST=None
Change-Id: I4ac14a38e4b3acc4926d4f51f409ff12d9c841cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 679014bc843788e8d4d5f5c7470ae76f8be5e942
Original-Change-Id: I9c0aba40ddd8a0852391df184034baa740d063df
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228938
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9550
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This enables RAM_CODE_SUPPORT for veyron* platforms and uses the
generic gpio_get_binaries() function to read RAM_ID GPIOs.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=built and booted on pinky
Change-Id: I7a03e42a270bec7036004375d36734bfdfe6e528
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a325b204ff88131dfb0bdd3dfedb3c007cd98010
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibc4c61687f1c59311cbf6b48371f9a9125dbe115
Original-Reviewed-on: https://chromium-review.googlesource.com/227249
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This makes board_id() use the generic gpio_base2_value() function
to obtain the value of the board ID straps.
BUG=none
BRANCH=none
TEST=tested on pinky
Change-Id: I15c1310889b989c34638fd342011aef5fe7bcec1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcbb8a6998a66531326afe16b232395d49fee64d
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I5847bf1c5b26bcaf7d36103f31bb255b31ff8185
Original-Reviewed-on: https://chromium-review.googlesource.com/228370
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
LDO7 (VCC10_LCD_PWREN_H) is essentially just a glorified GPIO that turns
the real VCC10 regulator on or off. We tried setting it to 3.3V since it
matches the VCC33_SYS voltage on the input of that regulator. However,
we didn't notice that the LDO only supports going up to 2.5V.
This patch changes the voltage to the allowed maximum, which should
still work fine as an enable line (and is the same value used by the
kernel). This removes an assertion error in the ramstage.
Also change the PMIC driver to assert maximum VSEL values based on the
LDO, because the lower-voltage ones support one more setting. (LDO3 is
actually listed to only go up to 0b1111 in the manual, and has a weird
jump from 0b1101 -> 2.2V (skipping over 0b1110) to 0b1111 -> 2.5V. I
don't know if that's a documentation error or what they were smoking
when they designed that, but we don't need to care for now.)
BRANCH=None
BUG=None
TEST=Booted on Pinky, no more ASSERTION FAILED.
Change-Id: I38bf99e38822fd0883fd4d0bd9a1b01143545a95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 70f3149efbc3aa9a03ab3fd5be99d17d9c5e1c87
Original-Change-Id: I68a3bb882cf25d98aca8922ede2a17e1ef6524de
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228292
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Jerry Parson <jwp@chromium.org>
Reviewed-on: http://review.coreboot.org/9547
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The eMMC enable pin is in a 3.3V IO domain. Unfortunately the eMMC
expects this pin to be 1.8V. The way we were driving this pin would
cause the eMMC to pull power through this pin and that was causing
current leaks.
In future revisions of hardware we should move this pin somewhere more
legit. However, in the current hardware we can get things working
pretty well by using a pullup to "drive" this pin. This will work in
conjunction with the external 100K pullup to give a somewhat
reasonable voltage. The eMMC will also not be able to pull much
current through this pin, so it can't leak too badly.
BRANCH=none
BUG=chrome-os-partner:33319
TEST=Boot a kernel that doesn't touch the mux/pulls and see no leak:
dut-control --port=${SERVO} vcc_flash_ma -t 5
Change-Id: Ibc25cd090d826c8215be24a0b5c11d97b5281700
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 26e7a9d7e067ed4dd859387ee63bf654ab9dc529
Original-Change-Id: Iadfc1477cd478773cc9d159e3fbc22b66b8f0f78
Original-Signed-off-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226039
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9545
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
slowly raise to max cpu voltage to prevent overshoot,
and in our experience,when cpu run in 1.8GHz,the
vdd_cpu must up to 1.4V
BUG=chrome-os-partner:32716, chrome-os-partner:31896
TEST=Boot on veyron_pinky rev2,check the rk808 buck1 voltage 1400mv
and measure the overshoot is 1440mv
Change-Id: I759840bd8cf57a5589bf1862d04803f80f804164
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 567f616ff091883ed3275b407859c9399db981b2
Original-Change-Id: I9bb739b49ae4b4f7a60133fa38b0fe51b95c0d78
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226753
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch is the start of a series to change all non-x86 SoC-specific
headers to be included as <soc/header.h> instead of the old
<soc/vendor/chip/header.h> or "header.h". It will add an include/soc/
directory under every src/soc/vendor/chip/ and append the .../include/
part of that to the global include path.
This matches the usage of <arch/header.h> for architecture-specific
headers and had already been done for some headers on Tegra. It has the
advantage that a source file which does not know the specific SoC used
(e.g. Tegra files common for multiple chips, or a global include file)
can still include SoC-specific headers and access macros/types defined
there. It also makes the includes for mainboard files more readable, and
reduces the chance to pull in a wrong header when copying mainboard
sources to use a different-related SoC (e.g. using a Tegra124 mainboard
as template for a Tegra132 one).
For easier maintainability, every SoC family is modified individually.
This patch starts out by changing Rk3288. Also alphabetized headers in
affected files since we touch them anyway.
BUG=None
TEST=Whole series: compared binary images for Daisy, Nyan_Blaze,
Rush_Ryu, Storm, Urara and Veyron_Pinky. Confirmed that they are
byte-for-byte identical except for timestamps, hashes, and __LINE__
macro replacements. Compile-tested individual patches.
Change-Id: I4d74a0c56be278e591a9cf43f93e9900e41f4319
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ad8b6d2e0280428aa9742f0f7b723c00857334a
Original-Change-Id: I415b8dbe735e572d4ae2cb1df62d66bcce386fff
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222025
Reviewed-on: http://review.coreboot.org/9349
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
check the cpu and gpu temperature in romstage,
if over 120 degrees celsius,shut down the device.
BUG=None
Test=Boot on veyron_pinky rev2, write value
3421(125 celsius) to grf_tsadc_testbitl register,
the device will be shut down
Change-Id: I275d643ce8560444a9b42ee566d5fd63ebcda35e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e0c597489dc0637ffa66ee9db0c4f60757f8889f
Original-Change-Id: If406d6a4f6201150f52ea7fc64cd50b45778d7aa
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223259
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9348
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Solving the DACR bug will mean that XN bits suddenly become enforced on
non-LPAE systems, and we will no longer be able to execute out of a
region mapped DCACHE_OFF. When we enable the MMU in romstage we are
still executing out of SRAM, so we would instantly kill ourselves.
Solve this issue by enabling the MMU earlier (in the bootblock) and
mapping the SRAM regions as DCACHE_WRITETHROUGH. They should really be
DCACHE_WRITEBACK, but it looks like there might be hardware limitations
in the Cortex-A12 cache architecture that prevent us from doing so.
Write-through mappings are equivalent to normal non-cacheable on the A12
anyway, and by using this attribute we don't need to introduce a new
DCACHE_OFF_BUT_WITHOUT_XN_BIT type in our API. (Also, using normal
non-cacheable might still have a slight speed advantage over strongly
ordered since it should fetch whole cache lines at once if the processor
finds enough accesses it can combine.)
CQ-DEPEND=CL:223783
BUG=chrome-os-partner:32118
TEST=None (depends on follow-up CL)
Change-Id: I1e5127421f82177ca11af892b1539538b379625e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b079f4b6a69449f3c7cc18ef0e1704f2006847
Original-Change-Id: I53e827d95acc2db909f1251de78d65e295eceaa7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9342
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
before the rkclk_init(), we must set rk808
buck1 voltage up to 1300mv
BUG=chrome-os-partner:32716, chrome-os-partner:31896
TEST=Boot on veyron_pinky rev2,check the rk808 buck1 voltage 1300mv
and check the cpu frequency up to 1.8GHz
Original-Change-Id: I6a8c6e35bd7cc6017f2def72876a9170977f206e
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222957
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
(cherry picked from commit 2e7e7c265691250d4a1b3ff94fe70b0a05f23e16)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iff89d959456dd4d36f4293435caf7b4f7bdaf6fd
Reviewed-on: http://review.coreboot.org/9260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This re-factors rockchip_spi to remove speed_hz which will instead be
passed in via rockchip_spi_init(), thus making it easier to support
other boards which may have different slave devices attached.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I7baf0fa0a2660e3c975847fdec3eb92bcd0d6c10
Original-Reviewed-on: https://chromium-review.googlesource.com/220411
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit de33d2ed6352fc4c8e81dc53451f164a8792daf2)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ie6473e47d50b7e633688185e8d8036980b833f1c
Reviewed-on: http://review.coreboot.org/9245
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch moves init for I2C, SPI, ChromeOS GPIOs to the
board-specific bootblock init function on Pinky, the idea being
to isolate SoC code so that it's more readily adaptable for
different boards.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I75516bbd332915c1f61249844e18415b4e23c520
Original-Reviewed-on: https://chromium-review.googlesource.com/220410
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 0a7dec2fe70679c3457b0bfc7138b4a90b6217c8)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ib2c2e00b11c294a8d5bdd07a2cd59503179f0a84
Reviewed-on: http://review.coreboot.org/9243
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Since the UART which is used for the serial console may change from
board-to-board, this moves CONSOLE_SERIAL_UART_ADDRESS from rk3288's
Kconfig into Pinky's Kconfig.
BUG=none
BRANCH=none
TEST=built and booted on pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I29837a72d8cf205a144494a6c8ce350465118b34
Original-Reviewed-on: https://chromium-review.googlesource.com/221438
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 53bff629f2e9865656beabd81e6ce1eab7c728a9)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I65835c07a49dc3a3518c6bb24a29bc6ae7dd46c9
Reviewed-on: http://review.coreboot.org/9242
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add ddr3-samsung-2GB config and modify 533mhz linit.
Support ddr3 freq up to 800mhz.
Enable ODT at LPDDR3.
BUG=None
TEST=Boot Veyron Pinky
Original-Change-Id: Ic02a381985796a00644c5c681b96f10ad1558936
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220113
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Change-Id: I867753bc5d1eb301eb4975f5a945bfdba9b8f37d
(cherry picked from commit e6689cbb0ec50317672c8ebe4e23555ca2f01005)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=None
TEST=Boot Veyron Pinky and test the VDD_LOG
Original-Change-Id: Ie2eef918e04ba0e13879e915b0b0bef44aef550e
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219753
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Change-Id: I444b47564d90b3480b351fdd8460e5b94e71927c
(cherry picked from commit 4491d9c4037161fd8c4cc40856167bf73182fda6)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9240
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
BUG=None
TEST=Boot Veyron Pinky and measure i2c clock frequency
Original-Change-Id: I04d9fa75a05280885f083a828f78cf55811ca97d
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Change-Id: Ie7ac3f2d0d76a4d3347bd469bf7af3295cc454fd
(cherry picked from commit 4b9b3c2f8b7c6cd189cb8f239508431ee08ebc52)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9241
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This gives the EC some time to wake-up between asserting /CS and
starting a transfer.
BUG=chrome-os-partner:32223
BRANCH=none
TEST=verified ~100us delay using logic analyzer on Pinky
Original-Change-Id: I9874e65abd405874c43c594d8caeeff9e1300455
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220243
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Commit-Queue: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Change-Id: I103542517d3ebd7da4f0394b3ae4f68f58403b1e
(cherry picked from commit bdb67fe489b7cbea7a26492fa0536ca452434052)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9238
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds support for the board changes in rev2 (board_id = 0001).
It also moves the existing mainboard.c code around a bit to group it by
component.
BUG=chrome-os-partner:32139
TEST=Booted on rev1. Confirmed SD card still works. Confirmed power
button was still as broken as before.
Original-Change-Id: Ifc4876687db64ca50e41d009d911446129d57b1b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220251
(cherry picked from commit 9428e0d1b784b27790b3b3dbbb18a769e51c6fd3)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8d3479aa314f8c6f1591c1b69b0a3827234fc730
Reviewed-on: http://review.coreboot.org/9237
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CQ-DEPEND=CL:218766
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ib3eed77553433e9f8c70af8b148729e628c95747
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 56b3e8c02a4e45653a5369ce47dcbce0c18f7194
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Icbee95350949bd9bfa4490a8a4b6bbf09beb4170
Original-Reviewed-on: https://chromium-review.googlesource.com/221019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9224
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The static gpio_t initializers are stylish, but they are still a little
too annoying to write and read in day-to-day use. Let's wrap that in a
macro to make it a little easier to handle.
BUG=None
TEST=None
Change-Id: If41b2b3fd3c3f94797d314ba5f3ffcb2a250a005
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 102a5c0a800f43d688d11d1d7bbc51e360341517
Original-Change-Id: I385ae5182776c8cbb20bbf3c79b986628040f1cf
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220250
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9052
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a mainboard-specific bootblock function that will be used
to set up some board-specific parameters which are currently set up
in the SoC bootblock function.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: I86c90f7ade824fb9d6b71ca3349d1ce9eb4772fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 03e0bb2eaca7a54c3df95b21d856ef4114d3c833
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibee7076ebd6080f04b0697067e85ce8b6b2230e4
Original-Reviewed-on: https://chromium-review.googlesource.com/220399
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9050
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Rk808 PMIC is a part that will probably be used by most Rk3288
boards, so it makes sense to keep it as common code in the the SoC
directory. This patch puts LDO control functions into rk3288/rk808.c, so
that the mainboard only has to call a simple interface to set up the
specific LDOs it requires.
BUG=chrome-os-partner:30167
TEST=Booted both this and the old version with a stubbed-out
i2c_writeb(), ensured that the final values are the same.
Change-Id: I7efa60f8a357ce6be7490e64d2e0e3f72ad16f1c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4df22cd78ee04fefc6f7fa0e5c3d903eb1794422
Original-Change-Id: Ic172f9c402e829995f049726d3cb6dbd637039d1
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217598
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8871
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch adds code to read the board ID from Pinky and put it into the
coreboot table.
(Note: This implementation differs slightly from Tegra since it pinmuxes
the GPIOs inside board_id(). That means the pinmuxing might be set more
than once if called in multiple stages, which is perfectly harmless and
in my opinion cleaner than having to (remember to) do it manually in one
of the per-stage files.)
BUG=chrome-os-partner:30167
TEST=With depthcharge patch, select -rev1 device tree for board ID 0.
Change-Id: I265fafcb176a31a46f7792ecf352f1671be7dd41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9da10ce8b62ec98243fc7c82544b3004316799a8
Original-Change-Id: I5b5689373e1e47b1e0944b5fe5f2e70a285b931f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217675
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
We retroactively decided to use the variant name "pinky" for the Rk3288
board we're currently bringing up, and retcon the unadorned "veyron"
name to refer to the Rockchip evaluation board. Since we currently have
no interest to maintain coreboot support for that board in our tree,
let's rename everything to "veyron_pinky" and forget about "veyron".
CQ-DEPEND=CL:217592
BUG=chrome-os-partner:30167
TEST='emerge-veyron libpayload coreboot' fails but
'emerge-veyron_pinky libpayload coreboot' succeeds.
Change-Id: I88bf5cc2da7c2f969ea184b5f12affaa94045a06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aa8ec24b63d11798fec1993091b113a0c0938c7a
Original-Change-Id: I366391efc8e0a7c610584b50cea331a0164da6f3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217674
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8869
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
