Use proper indents in the devicetree and align `end` keywords.
Change-Id: Id6e6f4ad648a9bed35305b7a446744c6ed06a150
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48372
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCI devices P2SB and PMC are hidden by the FSP. So instead turning
them off, set their state to hidden being able to allocate ressources
for them.
Change-Id: Ie6e12f99b0a7ffb1c4831b3aa8705e911b677e88
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48371
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update lindar gpio settings for Synaptics trackpad no function issue.
Update I2C5 bus freq to 400kHz.
Improve Goodix Touchscreen power on sequence.
BUG=b:160013582
BRANCH=firmware-volteer-13521.B
TEST=emerge-volteer coreboot and check system dmesg and evtest can get
device. Verify trackpad function workable.
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I8c1ab6bab1f9de187e2a78ead7b5bbaf758f5fcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
This change updates the translated region device (xlate_region_dev) to
support multiple translation windows from the 1st address space to
2nd address space. The address spaces described by the translation
windows can be non-contiguous in both spaces. This is required so that
newer x86 platforms can describe memory mapping of SPI flash into
multiple decode windows in order to support greater than 16MiB of
memory mapped space.
Since the windows can be non-contiguous, it introduces new
restrictions on the region device ops - any operation performed on the
translated region device is limited to only 1 window at a time. This
restriction is primarily because of the mmap operation. The caller
expects that the memory mapped space is contiguous, however, that is
not true anymore. Thus, even though the other operations (readat,
writeat, eraseat) can be updated to translate into multiple operations
one for each access device, all operations across multiple windows are
prohibited for the sake of consistency.
It is the responsibility of the platform to ensure that any section
that is operated on using the translated region device does not span
multiple windows in the fmap description.
One additional difference in behavior is xlate_region_device does not
perform any action in munmap call. This is because it does not keep
track of the access device that was used to service the mmap
request. Currently, xlate_region_device is used only by memory mapped
boot media on the backend. So, not doing unmap is fine. If this needs
to be changed in the future, xlate_region_device will have to accept a
pre-allocated space from the caller to keep track of all mapping
requests.
BUG=b:171534504
Change-Id: Id5b21ffca2c8d6a9dfc37a878429aed4a8301651
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47658
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support in fmaptool to generate a macro in C header
file that provides a list of section names that do not have any
subsections. This is useful for performing build time tests on these
sections.
BUG=b:171534504
Change-Id: Ie32bb8af4a722d329f9d4729722b131ca352d47a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
All x86 platforms until now have memory mapped up to a maximum of
16MiB of SPI flash just below 4G boundary in host address space. For
newer platforms, cbfstool needs to be able to accommodate additional
windows in the host address space for mapping SPI flash size greater
than 16MiB.
This change adds two input parameters to cbfstool ext-win-base and
ext-win-size which a platform can use to provide the details of the
extended window in host address space. The extended window does not
necessarily have to be contiguous with the standard decode window
below 4G. But, it is left upto the platform to ensure that the fmap
sections are defined such that they do not cross the window boundary.
create_mmap_windows() uses the input parameters from the platform for
the extended window and the flash size to determine if extended mmap
window is used. If the entire window in host address space is not
covered by the SPI flash region below the top 16MiB, then mapping is
assumed to be done at the top of the extended window in host space.
BUG=b:171534504
Change-Id: Ie8f95993e9c690e34b0e8e792f9881c81459c6b6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47882
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the concept of mmap_window to describe how the SPI
flash address space is mapped to host address space on x86
platforms. It gets rid of the assumption that the SPI flash address
space is mapped only below the 4G boundary in host space. This is
required in follow up changes to be able to add more decode windows
for the SPI flash into the host address space.
Currently, a single mmap window is added i.e. the default x86 decode
window of maximum 16MiB size living just below the 4G boundary. If the
window is smaller than 16MiB, then it is mapped at the top of the host
window.
BUG=b:171534504
TEST=Verified using abuild with timeless option for all coreboot
boards that there is no change in the resultant coreboot.rom file.
Change-Id: I8dd3d1c922cc834c1e67f279ffce8fa438d8209c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change renames the macro `IS_TOP_ALIGNED_ADDRESS` to
`IS_HOST_SPACE_ADDRESS` to make it clear that the macro checks if
given address is an address in the host space as opposed to the SPI
flash space.
BUG=b:171534504
Change-Id: I84bb505df62ac41f1d364a662be145603c0bd5fa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47830
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
cbfstool overloads baseaddress to represent multiple things:
1. Address in SPI flash space
2. Address in host space (for x86 platforms)
3. Offset from end of region (accepted as negative number)
This was done so that the different functions that use these
addresses/offsets don't need to be aware of what the value represents
and can use the helper functions convert_to_from* to get the required
values.
Thus, even if the user provides a negative value to represent offset
from end of region, it was stored as an unsigned integer. There are
special checks in convert_to_from_top_aligned which guesses if the
value provided is really an offset from the end of region and converts
it to an offset from start of region.
This has worked okay until now for x86 platforms because there is a
single fixed decode window mapping the SPI flash to host address
space. However, going forward new platforms might need to support more
decode windows that are not contiguous in the host space. Thus, it is
important to distinguish between offsets from end of region and
addresses in host/SPI flash space and treat them separately.
As a first step towards supporting this requirement for multiple
decode windows on new platforms, this change handles the negative
offset provided as input in dispatch_command before the requested cbfs
operation is performed.
This change adds baseaddress_input, headeroffset_input and
cbfsoffset_input to struct param and converts them to offsets from
start of region before storing into baseaddress, headeroffset and
cbfsoffset if the inputs are negative.
In follow up changes, cbfstool will be extended to add support
for multiple decode windows.
BUG=b:171534504
TEST=Verified using abuild with timeless option for all coreboot
boards that there is no change in the resultant coreboot.rom file.
Change-Id: Ib74a7e6ed9e88fbc5489640d73bedac14872953f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47829
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Unique among the Volteer devices, the volteer2_ti50 variant connects to
the TPM via I2C. This CL introduces the proper devicestree declarations
for the Linux kernel to recognize that.
overridetree.cb is shared between "sub"-variants volteer2 and
volteer2_ti50, so both will have two TPM nodes, the I2C being disabled
by default. The odd _ti50 variant then has code in variant.c to enable
the I2C node and disable the SPI node.
BUG=b:173461736
TEST=abuild -t GOOGLE_VOLTEER2{_TI50,} -c max -x
Change-Id: I5576a595bbabc34c62b768f8b3439e35ff6bcf7b
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48223
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update Power Limit2 (PL2) minimum value to the same as maximum value for
volteer variants like baseboard, delbin, eldrid, terrador and todor.
All other variants uses the DTT entries from baseboard devicetree since
there is no override present for those variants. DTT does not throttle PL2,
so this minimum value change here does not impact any existing behavior on
the system.
BUG=None
BRANCH=volteer
TEST=Build and test on volteer system
Change-Id: I568e87c87ef517e96eaab3ff144b1674d26ae1e6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Probabilistic interrupt storm is observed while kernel is configuring
the GPIO for SD card CD pin. The root cause is that the macro
PAD_CFG_GPI_GPIO_DRIVER isn't configuring trigger as PAD_TRIG(OFF).
The way GPIO interrupts are handled is:
1. Pad is configured as input in coreboot.
2. Pad IRQ information is passed in ACPI tables to kernel.
3. Kernel configures the required pad trigger.
Therefore, PAD_TRIG(OFF) should be added in PAD_CFG_GPI_GPIO_DRIVER
to turn off the trigger while pad is configured as input in coreboot
and then let kernel to configure the required pad trigger.
BUG=b:174336541
TEST=Run 1500 reboot iterations successfully without any interrupts
storm.
Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com>
Change-Id: Icc805f5cfe45e5cc991fb0561f669907ac454a03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
DRIVER_I2C_TPM_ACPI is used to enable the "driver" needed for coreboot
to present a TPM node in the devicetree. It would usually only do so,
if coreboot itself is communicating with the TPM via I2C (I2C_TPM).
However, technically, there is no dependency.
In order to not show the ACPI option in menuconfig if the board is not
using I2C, a dependency was declared in Kconfig. However, the same can
be achieved without making it an error to manually declare
DRIVER_I2C_TPM_ACPI without I2C_TPM.
For Volteer, we have just such a need, since it has two "sub-variants"
sharing the same overridetree.cb, one having SPI TPM and another having
I2C TPM. The former will have a disabled ACPI node representing the I2C
TPM, while its Kconfig is such that coreboot itself does not have I2C
TPM support.
In order to export even a disabled ACPI node representing the I2C
connected TPM, coreboot needs DRIVER_I2C_TPM_ACPI. Hence, that will
have to be enabled in a case where coreboot does not have I2C_TPM (for
one of the two sub-variants, namely volteer2).
BUG=b:173461736
TEST=Tested as part of next CL in chain
Change-Id: I9717f6b68afd90fbc294fbbd2a5b8d0c6ee9ae55
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48222
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move all memory map definitions into a separate header.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I1f37ad9cae39041f98871c613b308b5ac5da01b3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45379
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to wrap these macros with casts. Removing them allows
dropping more casts in `early_init.c`.
To avoid binary changes the casts are put into the
{MCH,DMI,EP}BAR{8,16,32} macros instead where they are needed to reach
the right memory locations.
Change-Id: Icff7919f7321a08338db2f0a765ebd605fd00ae2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Inspired by Idca25b2e4bf65abcb and Ib275f9ad8ca9ff move all memory map
definitions into a header with a common name.
Change-Id: I32a99f70f4d2eb52367c9edfc0aa6d5da2fec03f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Setting PegXEnable to 1, statically enables the PEG ports, which blocks
the SoC from going to deeper PC states. Instead, set the state to "auto"
(2), so the port gets disabled, when no device was detected.
Note: Currently, this only works with the AST PCI bridge disabled or the
VGA jumper set to disabled on coreboot, while it works on vendor
in any case. The reason for this is still unclear.
Test: powertop on X11SSM-F shows SoC in PC8 like on vendor firmware
instead of just PC3
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I3933a219b77d7234af273217df031cf627b4071f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The patch modifies KConfig behaviour if CSE Lite SKU is integrated into
the coreboot. When the CSE Lite SKU is integrated, the KConfig prevents
writing to ME region but keeps read access enabled. Since CSE Lite driver
checks the signature of RW partition to identify the interrupted CSE
firmware update, so host must have read access to the ME region. Also, the
patch modifies the KConfig's help text to reflect the change.
When CSE Lite SKU is integrated, master access permissions:
FLMSTR1: 0x002007ff (Host CPU/BIOS)
EC Region Write Access: disabled
Platform Data Region Write Access: disabled
GbE Region Write Access: disabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: disabled
EC Region Read Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: disabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
BUG=b:174118018
TEST=Built and verified the access permissions.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I2f6677ab7b59ddce827d3fcaae61508a30dc1b28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
refer to cb:45878
Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices
can be hooked up together via devicetree aliases.
BUG=b:174735512
BRANCH=volteer
TEST=build and type-c display work
Change-Id: I0bf84e2691856c9760d8fa9b6d853b04be10390a
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48268
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames the cbfs_boot_load_file() to cbfs_load() to
avoid the build errors for cselite and align with the new changes
to API https://review.coreboot.org/c/coreboot/+/39304 .
Change-Id: I717f0a3291f781cc3cf60aae88e7479762ede9f9
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48291
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested=On OCP Delta Lake, verify the memory map hob data are correct.
Change-Id: I7bb2e9f41daa4cbce49169535eadf7f0d4972716
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Now pci_domain_ops in chip.c can also be marked as static.
Change-Id: Ia92b778a5882d991b391dc29aeee0a5615677913
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48315
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now pci_domain_ops in chip.c can also be marked as static.
Change-Id: I5e481fe311c9db4aacfd94bbf671edf679528946
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since config_of() calls die() if dev or dev->chip_info are NULL,
config_of_soc() will either return a non-NULL pointer or won't return.
Change-Id: I6de6bb1610e823af215436c94ff1a78ff6b86b78
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Since config.c also gets linked into verstage on PSP and not only into
the stages running on the x86 cores, use all-y instead of adding
config.c to all classes separately.
Change-Id: Icacb13e73e80e6f3d8c2141784702fb895daf7db
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The corresponding MSRs of all AMD family 17h and 19h CPUs/APUs match the
code.
Change-Id: I29cfef5d8920c29e36c55fc46a90eb579a042b64
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The next patch will add a tsc subfolder that might end up containing
code that is guarded with different Kconfig options, so move the guards
into the Makefiles in the subfolders instead of guarding the inclusion
of the Makefiles in the subdirectories with the corresponding Kconfig
option.
Change-Id: Iafc867eb9adcb23e9a4878cc381684db6f9692d5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Remove SOC_INTEL_COMMON_BLOCK_HDA from mainboards Kconfig since it is
selected by their SoC soc/intel/cannonlake.
Change-Id: I9597746a217575b42f6325998b948e16b452231a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48289
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make
clear that these methods are implemented on variant level.
Change-Id: Ib4e7ec948ca4d019ad82ebc5abe39fc408281cf4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48299
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add variant_configure_early_gpios() configuring early GPIOs to make the
difference clear.
Change-Id: I6e7c8c32963c9eeab4399947dac511442987cb45
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48298
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make
clear that these methods are implemented on variant level.
Change-Id: Ibcb6322067285984bad70761fce34cfcb6ed8e0f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48297
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make
clear that these methods are implemented on variant level.
Change-Id: I1ae9b54ed683000f65323b11747ce3280a1c7f2a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48296
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Don't make the default paths to AMD blobs depend on USE_AMD_BLOBS. This
way we get error messages about the missing files when the blobs repos
aren't checked out.
Change-Id: I754fdc5e1414c8a3dc88b364bcfbea9a26b59eb0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Allow to specify which signature is to be checked.
Change-Id: Ica874b1c4283fdb8dbd702c34ccb3315a2cf160d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Felix Singer