google_chromeec_get_uptime_info() doesn't need to return an error code
from the lower level calls for the caller to interpret. It is more
appropriate to return a success/failure boolean.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I3e27b8b4eed9d23e6330eda863e43ca78bb174a3
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69371
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
coreboot already has a ram failure post code defined, but the ram test
functions weren't using it, and were using 0xea instead.
This changes those failures to display 0xe3, the value defined in
post_codes.h by POST_RAM_FAILURE.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I21ef196e48ff37ffe320b575d6de66b43997e7eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The function pci_scan_bus had 3 post codes in it:
0x24 - beginning
0x25 - middle
0x55 - end
I got rid of the middle postcode and used 0x25 for the code signifying
the end of the function. I don't think all three are needed.
0x24 & 0x25 postcodes are currently also used in intel cache-as-ram
code. Those postcodes should be adjusted to avoid conflicting.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I19c9d5e256505b64234919a99f73a71efbbfdae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's not clear whether this variable should actually be used or not so
leave it be with a FIXME comment.
Change-Id: I4892600bfec55830acae56d2b293947c2d9ddd07
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69237
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Doing this in C code is way easier to understand. Also the thread local
storage is now in .bss instead of the AP stack. This makes it more
robust against stack overflows, as APs stacks overflow in each other.
TESTED: work on qemu.
Change-Id: I19d3285daf97798a2d28408b5601ad991e29e718
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69435
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This makes it easier to get the content of an msr into a full 64bit
variable.
Change-Id: I1b026cd3807fd68d805051a74b3d31fcde1c5626
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68572
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Depending on whether qemu emulates an amd64 or i386 machine the SMM
save state will differ. The smbase offsets are incompatible between
those save states.
TESTED: Both qemu-system-i386 and qemu-system-x86_64 (v7.0.50) have a
working smihandler, ASEG and TSEG.
Change-Id: Ic6994c8d6e10fd06655129dbd801f1f9d5fd639f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The disablement of SSE2 was not honoured since there is explicit
select under CPU_INTEL_MODEL_F2X. The removed commentary originates
probably from ROMCC romstage implementation.
Change-Id: I7d9ac007406a82c498f3ed23568e2ff064504983
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Support GL9763E as a eMMC boot disk.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I2b29309615df381f1e24f29fc048c6f9bf216b7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69425
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hook up the new EC driver.
Tested:
- Fn hotkeys work (brightness, display, volume, tp toggle, ...)
- Display lid
- Sleep/wake
- Camera (including Fn toggle)
- Bluetooth (both CNVi and PCIe card)
- Wi-Fi (both CNVi and PCIe card)
- CMOS options
Known issues:
- Touchpad toggle needs OS setup; see CB:68791
- UCSI is not implemented; see CB:68791
Change-Id: I6c4637936761cd62571b5d19fe2afd65560f49a0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59850
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hook up the new EC driver.
Tested:
- Fn hotkeys work (brightness, display, volume, tp toggle, ...)
- Display lid
- Sleep/wake
- Camera (including Fn toggle)
- Bluetooth (both CNVi and PCIe card)
- Wi-Fi (both CNVi and PCIe card)
- CMOS options
Known issues:
- Touchpad toggle needs OS setup; see CB:68791
- UCSI is not implemented; see CB:68791
Change-Id: I28ac401ada2945bb58fe862895458b10fed505fe
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68795
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop System76 EC, since the ODM board does not use it. Clevo EC FW
support will be added and hooked up cleanly in the follow-up changes.
Change-Id: I06abbde238be6d25842472a6a82159413ab52ef5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59816
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds a driver for the ITE IT5570E EC in combination with Clevo
vendor EC firmware. The interface is mostly identical on various laptop
models. Thus, we have implemented one common driver to support them all.
The following features were implemented:
- Basics like battery, ac, etc.
- Suspend/hibernate support: S0ix, S3*, S4/S5
- Save/restore of keyboard backlight level during S0ix without the need
for Clevo vendor software (ControlCenter)
- Flexicharger
- Fn keys (backlight, volume, airplane etc.)
- Various configuration options via Kconfig / CMOS options
* Note: S3 support works at least on L140CU (Cometlake), but it's not
enabled for this board because S0ix is used.
Not implemented, yet:
- Type-C UCSI: the EC firmware seems to be buggy (with vendor fw, too)
- dGPU support is WIP
An example of how this driver can be hooked up by a board can be seen in
in change CB:59850, where support for the L140MU is added.
Known issues:
- Touchpad toggle:
The touchpad toggle (Fn-F1) has two modes, Ctrl-Alt-F9 mode and
keycodes 0xf7/0xf8 mode. Ctrl-Alt-F9 is the native touchpad toggle
shortcut on Windows. On Linux this would switch to virtual console 9,
if enabled. Thus, one should use the keycodes mode and add udev
rules as specified in [1]. If VT9 is disabled, Ctrl-Alt-F9 mode could
be used to set up a keyboard shortcut command toggling the touchpad.
- Multi-fan systems
The Clevo NV41MZ (w/o dGPU) has two fans that should be in-sync.
However, the second fan does not spin. This needs further
investigation.
[1] https://docs.dasharo.com/variants/clevo_nv41/post_install/
Testing the various functionalities of this EC driver was done in the
changes hooking up this driver for the boards.
Change-Id: Ic8c0bee9002ad9edcd10c83b775fc723744caaa0
Co-authored-by: Michał Kopeć <michal.kopec@3mdeb.com>
Co-authored-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This EC code is for the Byte, a Cezanne Mini PC. The EC is different
to the Cezanne StarBook Mk VI. Rename it to `-desktop`, so the laptop
variant becomes the primary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I25f812cb1c6cefca1ebbe3bee5d20cf521dd60af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68319
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the characters per line limit was increased from 80 to 96, some
line breaks can be removed to improve code readability.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
When no HOB list is found, not only adding the resources reported by the
FSP were skipped, but also adding the GNB IOAPIC resource was skipped.
Fix this bug by moving the reporting of the GNB IOAPIC resource before
the resources reported in the FSP HOBs to not skip the IOAPIC resource
when there's no HOB list.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9174c8d7e5e94144187d27210e12f2dca3a6010f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69460
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
gladios variant.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Id6f2bf2a79df883bcb70171051cec4c577ca3bc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69424
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
The WCH CH347 presents a USB CDC serial port on interface 4 while in
operating modes 0, 1, and 3. Mode 0 also presents a UART on interface
2 but this is ignored for compatibility with the other modes. Mode 2
uses vendor defined HID usages for communication and is not currently
supported. Like the FT232H the data format is hard coded to 8n1.
Tested using a CH347 breakout board and a Dell Latitude E6400.
Change-Id: Ibd4ad17b7369948003fff7e825b46fe852bc7eb9
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68264
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These are used on newer platforms.
Change-Id: I20dc77fb6f83dc813e3da5fe30f8f52068fc4662
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
The FSPM and FSPS UPD signatures hadn't been updated from their cezanne
origins. Change them to MNDCNO_M/S.
BUG=b:240573135
TEST=Build & boot, see new signature in boot log.
Change-Id: I9e4fcf7a9bf802aaba88f3dccf6da064c5686e96
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Without a cast the aritmetics of
tat = einj + sizeof(acpi_einj_smi_t)
is the same as
tat = (uintptr_t)einj + size(acpi_einj_smi_t) * size(acpi_einj_smi_t)
So it overshoots the intended offset by a lot.
This issue only came apparent because now einj is in the small IMD
region which is close to TSEG. With the wrong aritmetics the tat
pointer ended up inside TSEG which is not accessible from the OS
causing exceptions.
TEST: observe that tat pointer is inside the small IMD below
TSEG (0x78000000 on our setup).
"acpi_create_einj trigger_action_table = 0x77ffe89c"
Change-Id: I3ab64b95c33eef01b2048816a21e17855bcb2f54
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
It is no longer necessary to explicitly add "ERROR: "/"WARNING: " in
front of every BIOS_ERR/BIOS_WARN message.
Change-Id: I22ee6ae15c3d3a848853c5460b3b3c1795adf2f5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Commentary about mixing LAPIC IDs and IOAPIC IDs was wrong,
remove it. The only platform affected is aopen/dxplplusu with
i82801dx southbridge.
Change-Id: I1276a2050cabaaf07f740c2490d92c48bd5801fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Using this I/O APIC IDs will be assigned incrementally
in the order of calling. I/O APIC ID #0 is reserved for
the I/O APIC delivering GSI #0.
Change-Id: I6493dc3b4fa542e81f80bb0355eac6dad30b93ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
to soc
Move SMBIOS type 4 override functions from mainboard to soc so that all
xeon family cpus share same functions without implementing again.
Tested=On OCP Deltalake, dmidecode -t 4 shows expected info.
Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com>
Change-Id: I17df8de67bc2f5e89ea04da36efb2480a7e73174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Add definition for smbios type 4 and type 9
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I559995b0204f8e5bdeef2c0f8b394f9011d72240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Skyrim platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
BUG=b:241878652
BRANCH=none
TEST=Build kernel and firmware. Run on skyrim and verify TPM
functionality.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I2a3de8cb2b9241e2d81e02df49f317ac0408d5bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Enable WLAN power and deassert the various radio disables.
TEST=boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2d21905001fa776c0d5c864d83dcd697e3febe0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Change the EC FW CBFS filename prefix to a more accurate "ec/"
TEST=build and boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib9ee24ca06b29c74cc0a91f9e4789df00ba1ba53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
To support an RPL SKU on marasov, marasov must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for marasov so that it will use the RPL
FSP headers for marasov.
BUG=b:254365935
BRANCH=None
TEST=FW_NAME=marasov emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I7874420c0fb51b9cc616cd979ffc9349c381602e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69367
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 4 (0100)
H9JCNNNCP3MLYR-N6E 5 (0101)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifa0637b47d0017cdb9e26ed32328f4405c0df3f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69311
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This kind of allocation without '=' is not working with clang.
Change-Id: I2d3e9eb44c3e0e25e5a67c5386e5ddde1487cc74
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63063
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It looks like this code was not finished so it's left commented out
for now.
Change-Id: I442a42e297f2968dd2c824a93a9a1e2bc74ea2f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63074
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EC_CMD_USB_PD_PORTS host command returns a
struct ec_response_usb_pd_ports, not a
struct ec_response_charge_port_count.
Luckily, both structs have the same memory layout, so this is simply a
name change.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I0d7710ca8a45f0ea3939f58bbba6bab31ff41919
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69370
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Caveh Jalali