Add G2touch touchscreen support for kracko.
BOE NV116WHM-T04 V8.0 with G7500 touch panel sensor IC
BUG=b:277852921
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot & test on DUT
Change-Id: Ic065d5dc2900c6ccfee09031f7a80cefc391f5dd
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74307
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All the variant will use the same dGPU, so make PCIEXP_SUPPORT_RESIZABLE_BARS common.
BUG=b:277974986
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: If8618f2da3133c6b52427375c55a69d7014c4881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74371
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Read IOAPIC ID and number of interrupts from programmed registers.
Change-Id: Ic8ba395bc220fdb691118719f7b32dd7400931f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There is no longer a relation between MAX_CPUS and IOAPIC IDs,
start the cleanup with new declarations.
Change-Id: I65888550e359e55402d99e8816ece2061cfcccbc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch retrieves details of a specified firmware partition table.
The information retrieved includes the current firmware version and
other information about the firmware partition. The patch communicates
with the ME using the HECI command to acquire this information.
BUG=b:273661726
Test=Verified the changes for ISH partition on nissa board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I0582010bbb836bd4734f843a8c74dee49d203fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=b:277294460
TEST=None
Change-Id: If7fb9ab0c9b1260d342313badb65c55bb9f788c0
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74285
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement the GPS_REQUESTDXSTATE function which forces the
current D notifier state to re-report.
TEST=verified that notifications are forced out when invoked using
acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I6dab9b793fe1d0b1c875eddbe6ae324d2894efe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Currently the DNOT function first checks to see if the current DNOT
value has already been reported. Add support to allow forcing regardless
if it had been sent already.
TEST=confirmed that when enabled, all events notify. When disabled, only
events on value change are notified.
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I7a93cca6a8f922574dd46b46572b230755db9aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Currently the value was being truncated to 4 bytes. Change so that
the full 8 byte value is passed.
TEST=verified function returns expected value using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Icfc775de680e328a2b240595223d7098fee3dc3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This function adds support to convert a integer into a 8 byte buffer
TEST=verified returned buffer is as expected using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I89eb50f1452657c26b97eb5609ed956fa8ee8117
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The logic was not equals, rather than the intended greater than or
equal to for checking the minimum GPS revision.
TEST=version check passes as expected now
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I66bf1fc32295e1b9e9c41c661ea8e395a1592a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver.
Enable this option by default to maintain the existing behavior.
BUG=b:270985197
TEST=Verified by enabling/disabling the UPD on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch updates total cpu count variable and total P-core count in
cpu_apic_info_type structure to `unsigned short int` to address more
cores.
TEST=Verify the build on Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I46239cc7ad9870e7134955af56b9f6625be2b002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Create the taranza variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:277664211
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_TARANZA
Change-Id: Id64e48ff2acd6e827fe586a00376183930ddc7e1
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74295
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Its EDID string is "LTN121AT07L02". The vendor sets BLC_PWM_CTL to
0x31313131.
This frequency seems working well on the x200 with this panel, which
is said to be LED.
Change-Id: I8b0ec04c6f6fcb6d4027a5114698db87d7718191
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74182
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The BSP might have non-zero lapicid so set the topology accordingly,
without assuming it is 0. This fixes a cpu exception on at least Intel
Meteorlake. This was caused by FSP CPU PPI being giving incorrect
information about the BSP topology.
This problem was introduced by 8b8400a "drivers/fsp2_0/mp_service_ppi:
Use struct device to fill in buffer" which sets the PPI struct based on
struct device.
TESTED on google/rex
Change-Id: I3fae5efa86d8efc474c129b48bdfa1d1e2306acf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74374
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To quote the gnu make manual: "A phony target is one that is not really
the name of a file; rather it is just a name for a recipe to be executed
when you make an explicit request. There are two reasons to use a phony
target: to avoid a conflict with a file of the same name, and to improve
performance."
Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Processor attached memory should not use reserved_ram_from_to and
treat the calculation of gi_mem_size size as 64MB.
By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms,
this should fix small total memory issue. Before the fix running
command 'free -g -h' under Linux shows the total memory is only 1.4Gi,
after the fix it's showing the expected total memory size 15Gi.
Tested=On AC without attaching CXL memory, the total memory size is
the same as de-selecting SOC_INTEL_HAS_CXL.
On OCP Crater Lake with CXL memory attached, CXL memory can be recognized
in NUMA node 1:
numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 .. 59
node 0 size: 95854 MB
node 0 free: 93860 MB
node 1 cpus:
node 1 size: 63488 MB
node 1 free: 63488 MB
node distances:
node 0 1
0: 10 14
1: 14 10
Change-Id: I38e9d138fd284620ac616a65f444e943f1774869
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Yavilla is a variant of yaviks which is almost identical
to yaviks, so is reusing the yaviks coreboot variant.
so update the GPIO tables to handle these based on fw_config.
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I831b199055c931e7a4a393eeb9e75e83c8ae3c3a
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74264
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Yavilla will leverage yaviks FW build.
It has one additional USB Type-A0 port, support stylus and support WWAN.
Here update devicetree based on FW_CONFIG for yavilla's design.
-Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0
-Enable USB2 port5 and USB3 port3 for WWAN
-Enable pen garage
-Enable rear mipi cam
-Enable Synaptics touchpad
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Use the common acpi_fill_root_complex_tom function instead of the SoC-
level northbridge_fill_ssdt_generator function that does basically the
same.
TEST=Resulting coreboot SSDT remains unchanged on Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The USB port configuration was derived from the PPR and schematics.
Primary functions are:
2 USB-C ports
1 USB SS+ type A port
2 Cameras (World/User facing)
1 Bluetooth transceiver
1 WWAN
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Iecb256cad7b2daea1fddfc8323e88ff5c38d1e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable the XHCI controllers in the devicetree for myst project.
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I05dc5bb157f0ef955e4b37e34d7b32678e42ebc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
In CB:41119, I sort of made up a mechanism on the fly for how to make
the machine-parseable cbfstool print output extensible without breaking
backwards compatibility for older scripts. But I only explained it in
the commit message which is not very visible. This patch adds a comment
to the function that generates that output so that people who want to
change it can understand the intent.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0d18d59e7fe407eb34710d6a583cfae667723eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
DDI 2..4 are the display outputs multiplexed onto the 3 USB type C ports
as DisplayPort alternate function, so use the DDI_DP_W_TYPEC connector
type for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I659d62bfb426e3e47214203490c34e9c200beee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74299
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the blob type for TypeId0x25_Mp2Fw_MDN_AD03.sbin to
subprogram 0. Delete the extra MP2FW line.
BUG=b:246770914
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I5418b1ed59e1916b971d2eece9f6a2fd0e51b1b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This reverts commit 655f7362e1.
Reason for revert: Apparently, the change was not properly reviewed. It
not only contains conflicting name and description of the D3COLD
Kconfig, but also creates a conflict between existing devicetree and
Kconfig options for D3Cold/S3/S0ix.
Change-Id: I56ce8f59f8548fc58bc2b3b07c1314e2eed7061c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The Kconfig is only used in common code to gather the build time
maximum socket number FSP support. The same information is available
in FSP header as MAX_SOCKET, thus use the FSP as truth of source.
Currently MAX_SOCKET is 4.
Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Enable iommu in devicetree for myst in order to allow kernel to load and
initialize IOMMU.
Bug=b:276805280
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I94e93afe775b070253464a9d187ad6c028d1b811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable the console UART for myst devices.
Bug=b:275900837
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I52c1b86c46907216d88f98917968b833af0d5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74103
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
These new memory are added for yavilla.
DRAM Part Name ID to assigna
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I3c48b9763f54e2e69f7c2d494fefbabedab2a389
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This reverts commit 4dba71fd25.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No need for variant to use _weak.
BUG=b:276818954
TEST=new_variant_fulltest.sh rex0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch configures external V1p05/Vnn/VnnSx rails for Uldren
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I3ff8e7db33bfbe4048327825406462262e8d2919
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74335
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With EC's lid switch implementation, there is no need to maintain the
lid switch state in mainboard. Hence remove LIDS ACPI object from
mainboard.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Read the lid switch state
correctly through /proc/acpi/button/lid/LID0/state.
Change-Id: I0f8dc7216337268c421a475f54ee5b28abf33d08
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
With CB:16732, EC can provide default lid switch implementation(LID0
ACPI device). Up until that point, mainboard has been providing default
switch implementation. When EC provides lid switch implementation, the
lid switch state is read from EC either through MMAP or LPC interface.
Hence there is no need to keep mainboard's LIDS ACPI object in sync with
EC's lid switch state. Use only EC's lid switch state on boards using
EC's implementation. This paves the way to remove LIDS ACPI object on
those mainboards.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Trigger lid open/close
events and ensure that they are detected properly through
/proc/acpi/button/lid/LID0/state.
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: open
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: closed
Ensure that the system behaves as expected based on powerd
configuration. After signin, system suspends/resumes for lid close/open.
On signin screen, system shuts down/boots for lid close/open.
Change-Id: I013574d7c21761f167ad38aeed27a419677b8000
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Robert Chen