Commit Graph

340 Commits

Author SHA1 Message Date
Patrick Georgi 78a5f22994 build system: mark sub-make invocations as parallelizable
We rely on gnu make, so we can expect the jobserver to be around in
parallel builds, too. Avoids some make warnings and slightly speeds up
the build if those sub-makes are executed (eg for arm-trusted-firmware
and vboot).

Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18263
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-31 18:51:55 +01:00
Arthur Heymans 7218a1e754 Only add etc/ps2-keyboard-spinup when not updating an image
Without this motherboards that requires a non zero timeout for ps2
keyboards on SeaBIOS don't build when CONFIG_UPDATE_IMAGE is set.

An alternative way to achieve this file would be to include a cbfsfile
instead of calling cbfstool. That way the file gets updated/added both
both image update and regular build. A difficulty of that approach is
that it needs to convert a decimal to a binary in little endian
representation, which is not a trivial thing to do in a Makefile.

Change-Id: Icafba8d3e279a2e70e607abba81e3dbebfb55e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18231
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-27 02:09:38 +01:00
Patrick Georgi 0ffef882d8 build system: don't run xcompile or git for %clean/%config targets
It takes a long time for no gain: We don't need to update the
submodules, we don't need to fetch the revision, we don't need to find
the compilers, when all we want to do is to manipulate the .config file
or clean the build directory.

Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18182
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24 23:22:56 +01:00
Patrick Georgi 847bbb8b1b cbfs-compression-tool: add to "make tools" target
Change-Id: I7bd0a17f9b20e46aee836fef1ff0b39de8670a15
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24 18:19:28 +01:00
Paul Menzel acbb70b810 Makefile.inc: Explicitly set GNU11 as C language standard
Different compiler versions use a different C language standard by
default.

GCC 4.9 uses GNU89 by default [1], while GCC 5.x uses GNU11 [2].

The discussion on the mailing list in thread *[RFC] Setting C99 by
default* [3] resulted in the preference of C11, which results in build
errors.

So explicitly set it to GNU11, which is also what the current coreboot
toolchain with GCC 5.3 is using.

[1] https://gcc.gnu.org/onlinedocs/gcc-4.9.4/gcc/C-Dialect-Options.html
[2] https://gcc.gnu.org/onlinedocs/gcc-5.4.0/gcc/Standards.html
[3] https://www.coreboot.org/pipermail/coreboot/2016-November/082541.html

Change-Id: If1569618f8044925ff72dcf3543480b34d4f90d6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17636
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-01-22 19:26:26 +01:00
Martin Roth 8d49d52ae9 Makefile.inc: Update what-jenkins-does target
- Update the junit.xml target to make it less util specific
- Add builds of coreboot internal payloads: nvramcui and coreinfo

Change-Id: I97fda909065659ab7fa4c8ee00d936d97b255bf7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17014
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-12-12 17:45:41 +01:00
Matt DeVillier 91480cc64c Makefile.inc: export VARIANT_DIR as top-level variable
export VARIANT_DIR at the top level, rather than doing so multiple
times at the SoC / board level

Change-Id: If825701450c78289cb8cca731d589e12aafced11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-18 20:28:37 +01:00
Martin Roth d61b5404dc southbridge/amd: update for amdfwtool size on command line
amdfwtool was getting the ROM size as a #define when it was built.
It has been updated to pass it in as a command line parameter, so
now it can be built just once for abuild as a shared tool.

Update the calls to amdfwtool to pass the ROM size.

All platforms using amdfwtool had the output verified using
a binary compare.

This reverts commit 0529236ed2
(Makefile.inc: Don't share amdfwtool between platforms)

Change-Id: I188b34e08249f2d00bd48957ced750b21f1ec348
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17327
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-10 00:27:52 +01:00
Nico Huber ef405a2c04 Set up 3rdparty/libgfxinit
`libgfxinit` is a SPARK library for graphics modesetting. It supports
Intel integrated graphics only, strictly speaking, the Core i processor
line.

Change-Id: Idf4b0e5fbf37a5d974075b2e44d1fa16dc428da3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16949
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-29 01:35:03 +02:00
Nico Huber e09f8acdad Set up 3rdparty/libhwbase
`libhwbase` is a SPARK library that contains some basic support for i/o
access, debugging, timers. Just what I put around `libgfxinit`, to make
it build standalone.

Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-29 01:34:45 +02:00
Nico Huber e84e625483 Add option to build Ada debugging code
Ada knows a pragma `Debug` that is used to exclude procedure calls from
a release build. The new option `DEBUG_ADA_CODE` enables those procedure
calls.

Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-29 01:28:13 +02:00
Paul Menzel a3a6746495 Makefile.inc: Explicitly disable PIE
Some distribution compilers enable Position Independent Executable (PIE)
by default, causing a build failure.

So explicitly disable PIE by passing the flag `-fno-pie`, to fix the
build error.

Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17097
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28 20:16:33 +02:00
Martin Roth 0529236ed2 Makefile.inc: Don't share amdfwtool between platforms
amdfwtool currently gets built for a specific size of ROM chip.  This
should be updated to be passed in on the amdfwtool command line, but
until that's done, stop sharing the tool between builds.

This caused a problem for abuild when we tried changing the default
rom to one that used a 256KB rom chip.  That wasn't large enough for
all of the files included by amdfwtool on several platforms, causing
build failures.

Change-Id: Ib08f3283e5be956f995a4a416a70b12a32462882
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17070
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-21 19:38:39 +02:00
Daisuke Nojiri 165af1c5c2 gitconfig: Allow user name and email to be in includes
This patch adds '--includes' option to 'git config --global' command
to allow user name and email to be defined in a file included from
the global gitconfig (~/.gitconfig) file.

BUG=none
BRANCH=none
TEST=make gitconfig with ~/.gitconfig including another file which
defines user.name and email.

Change-Id: I4fe61078b143c3a2e26b0be69c3ca8e6f069d8b0
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16912
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-13 18:21:17 +02:00
Nico Huber 6dfffdc297 Makefile.inc: Fix make gitconfig for blobs repo
It's `.git/modules/3rdparty/blobs` now.

Change-Id: Ief12bb934332375a20f150afb568aef266924c9f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16946
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-10-10 13:46:02 +02:00
Martin Roth 0f671f6ee9 Build system: Remove IASL_WARNINGS_ARE_ERRORS option
All systems are building with IASL warnings as errors enabled.
Remove the option to disable it.

Remove the notification at the end of the build.

Change-Id: I5c6218c182fdf173b4026fd010d939a5fa36040e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16606
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-22 22:33:55 +02:00
Martin Roth 03b9ecb2cf Makefile.inc: Add aliases for submodule updates to gitconfig target
Updating submodules seem to give people headaches, so this adds a pair
of git aliases to update them.

'git sup' updates the submodules to the latest versions, but leaves any
locally modified files.

'git sup-destroy' will remove the current submodules and re-initialize
them.  This deletes any local changes.

Change-Id: Id62a30d88b3b6d285b3f00555d7609509aa1561f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16573
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20 22:20:30 +02:00
Nico Huber be5492aec0 Add minimal GNAT run time system (RTS)
Add a stripped-down version of libgnat. This is somehow comparable to
libgcc but for Ada programs. It's licensed under GPLv3 but with the
runtime library exception. So it's totally fine to link it with our
GPLv2 code and keep it under GPLv2.

Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/11836
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-09-19 11:14:49 +02:00
Nico Huber 2e09d2b239 Make Ada a first class citizen
Some remarks on the make process:
  o We usually leave Ada specs (.ads files which are like c headers)
    together with the bodies (implementations in .adb files) in one
    directory. So we have to know, where they live.
  o If there is no matching .adb an .ads is a valid source file and
    we'll generate an object file from it.
  o Object files need to have the same basename as their source files :-/
    That's why we put them in build/<class>/ dirs now.
  o We track dependencies by looking at the compiler output (.ali files
    which accompany every .o). This way we don't need any gnatmake
    magic, or even more complex, less portable tools.

For ADAFLAGS_common, I simply copied the CFLAGS_common whilst dropping
everything unsupported and adding sane warning options.

The set of language features is highly restricted (see gnat.adc). This
should suit the embedded nature of coreboot and helps proving absence
of runtime errors with SPARK.

Change-Id: I70df9adbd467ecd2dc7c5c1cf418b7765aca4e93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-09-19 11:14:18 +02:00
Alexander Couzens c7702536ed Makefile.inc: build ifdtool using its own makefile
Change-Id: I67c73c101b928d104e231064e05d367bf9584730
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16571
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12 20:04:33 +02:00
Iru Cai 2128d625ca Makefile.inc: Use $(MAINBOARDDIR)
Commit 93ef3ff makes the following only print the part number when
the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable
that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so
use it instead of $(MAINBOARD_DIR).

build_complete:: coreboot
        printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \
                $(CONFIG_MAINBOARD_PART_NUMBER)

Change-Id: I729a583182937db7a926eb75aa28dfb53360046c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/16410
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04 05:33:25 +02:00
Julius Werner f975e55dcd cbfs: Add "struct" file type and associated helpers
This patch adds functionality to compile a C data structure into a raw
binary file, add it to CBFS and allow coreboot to load it at runtime.
This is useful in all cases where we need to be able to have several
larger data sets available in an image, but will only require a small
subset of them at boot (a classic example would be DRAM parameters) or
only require it in certain boot modes. This allows us to load less data
from flash and increase boot speed compared to solutions that compile
all data sets into a stage.

Each structure has to be defined in a separate .c file which contains no
functions and only a single global variable. The data type must be
serialization safe (composed of only fixed-width types, paying attention
to padding). It must be added to CBFS in a Makefile with the 'struct'
file processor.

Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27 01:16:22 +02:00
Patrick Georgi 21c54d26cb build system: Print the content of all regions we add files to
That's more useful than just COREBOOT for more complex scenarios

Change-Id: I93cd686d698799a3331ca2ea487cd6efb304caa0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11 20:32:28 +02:00
Patrick Georgi e206ab7a78 build system: drop -cbfstool-opts variable support
It was a band-aid that isn't required any more.

Change-Id: Ib1793ae8fe25eecf9bd5ab8e5feef0d9380b43c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16142
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11 20:32:18 +02:00
Patrick Georgi f3656d8238 build system: allow overriding file position and alignment per region
To override fallback/foo's position or alignment in region BAR, use
fallback/foo-BAR-{position,align} = 0x1234

Like for the global settings, specifying both isn't allowed
because that's rather pointless.

Change-Id: I94f41ebc9f35108267265df4164f23b70e3d0bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11 20:31:59 +02:00
Patrick Georgi 5986d2972a build system: remove early stage cbfs-file sorting
They're now sorted later in the process after the per-region file lists
are determined.

Change-Id: I0bba381d09dc4b99e2fe5cae16ff7ffcb5b3aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16138
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11 20:31:48 +02:00
Patrick Georgi 513693ca3a build system: order per-region files to optimize placement success
Make sure that files with a fixed position are placed first (whose order
doesn't matter: either they collide or they don't), then all aligned
files (where we just hope that the right thing happens) and finally the
files with no further requirements (again, hope).
It's still a pretty good heuristic given a typical coreboot image.

The global sorting that happens earlier in the build flow will be
removed in the future to make room for per-region requirements.

Change-Id: I269c00b2ece262c95d310b76a6651c9574badb58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16137
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11 20:31:36 +02:00
Patrick Georgi a8b86b3a9f build system: change addition order of files to go by region
Instead of adding each file in all requested regions, sort by region,
then by file.

This is in preparation of per-region file options
(eg. position, alignment)

Change-Id: Ide09a1c8840279380294a059bbd5d2f9f0cba780
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16130
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10 21:13:27 +02:00
Martin Roth 93ef3ffdf0 Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR)
The variable MAINBOARD_DIR already has the quotes stripped off.

Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16117
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10 21:12:03 +02:00
Martin Roth fc46583807 Makefile.inc: Strip CONFIG_DEVICETREE quotes at top of makefile
Minor change - Instead of stripping the quotes from CONFIG_DEVICETREE
inline, add it to the location where we normalize all the other Kconfig
variables.

Change-Id: Idbc58179c7b45160afef7d7e44f9b3b334f8c4a7
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16116
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10 21:11:49 +02:00
Patrick Georgi 16559c3447 build system: drop commented out code
Change-Id: I7f36a317f0a7cf4634246a255be79e6bcb2b2442
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16067
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-09 08:39:16 +02:00
Martin Roth c9c27bb14e sconfig: Remove mainboard chip.h support
The mainboard chip.h files were (mostly) removed long ago.

Change-Id: I1d5a9381945427c96868fa17756e6ecabb1048b2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16080
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08 19:16:02 +02:00
Martin Roth 25f8a4f6d4 sconfig: Update command line parameters
Instead of having directories and file names hardcoded, pass in the full
path and filename of both the input and output files.

In the makefile, create variables for these values, and use them in
places that previously had the names and paths written out.

Change-Id: Icb6f536547ce3193980ec5d60c786a29755c2813
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08 19:15:13 +02:00
Martin Roth 3205170a2e sconfig: pass in devicetree filename
Instead of forcing the hardcoded 'devicetree.cb' filename under the
mainboard directory, this allows mainboards to select a filename for
the devicetree file.

This allows mainboard variants that need to use different devicetree
files to live under the same directory.

Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12529
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08 19:14:33 +02:00
Aaron Durbin bcbb205454 build system: add easier targetting of cbfstool options per region
The first attempt of providing a options-for-region function to call
to determining a file's cbfstool options would work, but it means there
can only be one instance which has to handle all of the files that may
need an override. That logic can be problematic in impelementation.

Instead, provide a mechanism to target cbfstool options for a given
CBFS region where the implementation is tightly coupled in the build
system to where the file as requested to be added to cbfs. This allows
there to be a base set of cbfstool options while more easily extending
arguments on specific regions.

Example which adds '-b 0x10000' only for the COREBOOT CBFS region:
cbfs-files-y += file.bin
file.bin-COREBOOT-cbfstool-opts := -b 0x10000

Change-Id: Idfafb0205be42768adb04bb0a30fe46a9ca1bd57
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-05 07:59:54 +02:00
Nico Huber f641a27b63 Makefile.inc: Strip output of `wc`
Apparently BSD's wc indents its output.

Change-Id: I77f50a4b7d6012782f1c1b42ba20a64721c186c8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16013
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-03 09:40:36 +02:00
Furquan Shaikh 0325dc6f7c bootmode: Get rid of CONFIG_BOOTMODE_STRAPS
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.

BUG=chrome-os-partner:55639

Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28 00:36:22 +02:00
Furquan Shaikh 2a12e2e8da vboot: Separate vboot from chromeos
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.

BUG=chrome-os-partner:55639

Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28 00:36:00 +02:00
Paul Kocialkowski 46114517d7 Rename VB_SOURCE to VBOOT_SOURCE for increased clarity
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.

Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.

Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-27 17:26:05 +02:00
Aaron Durbin 40d93494c3 device: include devicetree in bootblock stage
Allow bootblock to get access to the static device tree like
other early stages. device_romstage.c was renamed to
device_simple.c to better articulate the usage since it's not
just being used in romstage.

BUG=chrome-os-partner:55357

Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15837
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins)
2016-07-27 00:40:05 +02:00
Subrata Banik 168eb6ad6f Makefile: Add uCode binary to FIT
Currently, on Intel Skylake the uCode binary is added to
CBFS based on the config option CBFS_EXTERNAL_HEADER. But
the entry is missing into the Firmware Interface Table, so
add it there.

BRANCH=none
BUG=chrome-os-partner:55403, chrome-os-partner:53077
TEST=built and verified FIT table has ucode entry.

Change-Id: I7dd7459ff7d2468f0aff66eb3ee9c2e3d7eda501
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15783
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-24 00:09:14 +02:00
Werner Zeh 95f6022cb1 flashmap: Use CONFIG_ROM_SIZE as flash size in flashmap
Currently there are two sources for the final size of the
flash image. One is defined as a Kconfig variable
(ROM_SIZE) and the other can be provided in a user defined
flashmap.fmd. This patch will enable the usage of CONFIG_ROM_SIZE
in flashmap.fmd to define the flash size. In this way, the
Kconfig variable is the only source of information for the
flash image size. This way is optional.

Change-Id: Id5298e06d360aaa6d94f2b5a2ffa65e45919853e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15219
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21 17:51:54 +02:00
Lee Leahy fc3741f379 Add Board Checklist Support
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot.  This processing builds a set of implemented
(done) routines which are marked green in the table.  The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table.  The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).

Add some Kconfig values:
*  CREATE_BOARD_CHECKLIST - When selected creates the checklist file
*  MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
   Documenation directory
*  CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
   *  <stage>_complete.dat - Lists all of the weak routines
   *  <stage>_optional.dat - Lists weak routines which may be optionally
      implemented

TEST=Build with Galileo Gen2.

Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03 17:29:13 +02:00
Furquan Shaikh 3ac9d4cbb0 Makefile: Add ifwitool to list of tools to be built
Add ifwitool to list of tools to be built so that it can be used by the
build system.

Change-Id: Ifcfbfd87ad9b7ba3ea11cfbcf40894f3e0dae694
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15013
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01 21:16:58 +02:00
zbao c16918ac11 splash: Put the suffix of splash file to CBFS name
The previous code harded the suffix of splash file as
"jpg". Actually, SeaBIOS supports both jpg and bmp.

Change-Id: I06c4b14aae7f75be3406652a94612b5f30ce91c2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/14932
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-26 23:48:02 +02:00
Jonathan Neuschäfer d4d3ecb551 jenkins: Run the romcc test suite
Change-Id: I467c56ffc632f58338cb3dbafade15acab5ee016
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14540
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-19 00:14:15 +02:00
Furquan Shaikh 94b18a1757 xip: Do not pass --xip for early stages if CAR supports code execution
On modern x86 platforms like apollolake, pre-RAM stages verstage and
romstage run within the cache-as-ram region. Thus, we do not need to
pass in the --xip parameter to cbfstool while adding these
stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is
default false for all x86 platforms. Apollolake selects this option
since it supports code execution with CAR.

Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-09 05:01:58 +02:00
Aaron Durbin ef10529187 cpu/x86: don't treat all chipsets the same regarding XIP_ROM_SIZE
Previously, the XIP_ROM_SIZE Kconfig variable is used globally on
x86 platforms with the assumption that all chipsets utilize this
value.  For the chipsets which do not use the variable it can lead
to unnecessary alignment constraints in cbfs for romstage.  Therefore,
allow those chipsets a path to not be burdened by not passing
'-P $(XIP_ROM_SIZE)' to cbfstool when adding romstage.

Change-Id: Id8692df5ecec116a72b8e5886d86648ca959c78b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14625
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06 16:49:37 +02:00
Patrick Georgi d264b46c49 build system: create fmap for UPDATE_IMAGE configurations, too
This fixes UPDATE_IMAGE builds, assuming that the fmap configuration in
the tree didn't change, at least as far as the CBFS regions are
concerned.

Another option would be to synthesize the fmap related files from the
existing image, but that comes with other issues (eg. what about
updating images old enough that there is no fmap?) and is more complex,
so keep it simple, stupid for now.

Change-Id: I036dab9f81f524f7d70bc0029b1ef835e6180a53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14601
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-05-05 23:16:29 +02:00
Werner Zeh bc2d151b00 payload: Fix broken Linux kernel as payload
Commit 785a31d67e
(Makefile.inc: Move payload code to payloads/) breaks the usage of
Linux kernel as payload. The reason for it is that cbfs-files-y is
evaluated before payloads/external/Makefile.inc is sourced and as a
consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for
payload options. That leads to missing command line and initrd for
the kernel which in turn leads to kernel panic when it boots.
To avoid it, move the code which adds payload to cbfs completely to
payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is
set right before the payload itself is added to cbfs-files-y.

I have tested this patch with a Linux kernel as well as with SeaBIOS as
payload on mc_tcu3 and it works. If someone sees impact to other
payloads just let me know.

Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-04 12:23:57 +02:00