In order to do a verification of romstage on x86 one needs to
run verstage which verifies romstage (and the memory init code).
However, x86 doesn't have SRAM like every other modern SoC so
managing the cache-as-ram region is especially critical.
First move all of the "shared" objects to the beginning of
the .car.data section. This change then ensures that each stage
using car.ld to link has the same consistent view of the addresses
of these fixed-sized objects in cache-as-ram. The CAR_GLOBALs can
be unique per stage. However, these variables are expected to have
a value of zero at the start of each stage. In order to allow a
stage to provide those semantics outside of the initial cache-as-arm
setup routine add _car_global_start and _car_global_end symbols.
Those symbols can be used to clear the CAR_GLOBALs for that stage.
Note that the timestamp region can't be moved out similarly to the
pre-ram cbmem console because the object storage of the timestamp
cache is used *after* cache-as-ram is torn down to indicate if the
cache should be used or not. Therefore, that timestamp needs to
migrated to ram. A logic change in src/lib/timestamp.c could
alleviate this requirement, but that task wasn't tackled in this
patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I15e9f6b0c632ee5a2369da0709535d6cb0d94f61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to support verstage on x86 one needs to link verstage
like romstage since it needs all the cache-as-ram goodies. Therefore,
provide a macro that one can invoke that provides the necessary
recipes for linking that particular stage in such an environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I12f4872df09fff6715829de68fc374e230350c2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11739
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This moves a few vboot-prefixed functions that were defined in chromeos.c to
vboot_common.c, since those are only relevant to vboot and depend on the vboot
handoff data. This allows more separation between CONFIG_CHROMEOS and what
CONFIG_CHROMEOS selects, so that each separate option (such as
CONFIG_VBOOT_VERIFY_FIRMWARE) can be enabled separately.
Thus, the actual definitions of these functions will only be declared when
CONFIG_VBOOT_VERIFY_FIRMWARE is set, so the check before calling
vboot_skip_display_init in bootmode was also adapted.
Change-Id: I52f8a408645566dac0a2100e819c8ed5d3d88ea5
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11497
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Avoid specifying the size of the microcode in microcode_size.h.
Instead, the size will be determined during build time and
microcode_size.h will be generated. This way, the size does
not need to be adjusted by hand.
Change-Id: I868f02b0cc03af12464a6a87c59761c200eb2502
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11709
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Use the common ME and descriptor code.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados
Change-Id: I7196f587b92fd26129b30e2cd73f4caf5f4ebef8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11735
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of selecting the Kconfig option and adding the subdir
entry within each chipset auto include the common/firmware
directory as it's guarded by HAVE_INTEL_FIRMWARE.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados.
Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11734
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The output of command below,
# i386-elf-nm build/cbfs/fallback/romstage_null.offenders | \
grep -q "" ; echo $?
has different result on MacOS, OS X Mavericks, which outputs 0.
On linux, it outputs 1.
I assume it is misleading to search an empty string in a empty
string. Change it to testing if the string is empty.
Change-Id: Ie4b8fe1fb26df092e2985937251a49feadc61eb0
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11600
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
1. The build folders are capitalized.
2. Add folders for build LLVM and IASL.
Change-Id: I6c752f08aa545d8878fddd373e5acbfade317ad5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11602
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Up to now, if both fmap and a master header existed, the master header
was used. Now, use the master header only if no fmap is found.
Change-Id: Iafbf2c9dc325597e23a9780b495549b5d912e9ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11629
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On x86, the bootblock can (and will) become part of the regular file
system, so there's no distinct fixed-size region for the bootblock
there.
Change-Id: Ie139215b73e01027bc0586701361e9a0afa9150e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This fixes building with CONFIG_COVERAGE=y
Change-Id: I5128ae0ef0d4f71e3ede7bcb3ee7ed7e265d1bb7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11729
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There appears to be an issue that is causing this particular bit of
ACPI code to be incorrectly interpreted by the kernel and the IASL
disassembler.
Ensuring the PCRB() method is defined in the DSDT before any uses of
it appears to fix the problem, but that relies on specific ordering
of the ASL files included by pch.asl and may break again in the future
if the includes were re-ordered. (they are alphabetic now)
So in this case to work around the issue unroll the function call so
the admittedly messy calculation is reduced to a constant when compiled.
Note this issue was observed with both iasl-20130117 and
iasl-20150717.
ACPICA bug: https://bugs.acpica.org/show_bug.cgi?id=1201
BUG=chrome-os-partner:45760
BRANCH=none
TEST=verify disassembled AML is correct
Change-Id: I7b6a3b792f79755db0ea7b9f2ef6ee7f5000e018
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ecacc340d6e1068ea649f0859657bb3208695730
Original-Change-Id: I232523f5b6ce290da6e7d99405a53b9437b10e0d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BUG=chrome-os-partner:41280
BRANCH=none
TEST=Audio jack insert/eject detection and headset buttons work
on glados with the nau8825 driver in chromeos-3.18 and the
staging kernel skl2.
Change-Id: I813a985b4a39249a2cdbe45117acbdb7710bfa29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a5b3dafd407fea2376dff5c3dcde50dff4704fb
Original-Change-Id: Ic24a0c444761d0f3a35c268078e70d9aacca4c80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293610
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11720
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Remove the CTDP support code that is in ACPI. It has been ported
from haswell and while the MCHBAR register interface does seem to
still exist the calculations for determining PL2 is no longer
straightforward.
Additionally nothing is using this interface and the expectation
is that DPTF will be used for throttling with PL[1234] and having
ACPI interfere with the configuration would not be good.
BUG=chrome-os-partner:44622
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I81e356ddf564a5253458b82bc3327bfb573ab16d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 884ee9a764bad0b3b4bcaeb5a3f46c5f090a116c
Original-Change-Id: I284ab52a305cee25c88df5228b01ff1e9544efe3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302166
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Recent version of iasl are flagging more things as warnings.
Remove unused Local0 uses and make _CRS method serialized to
fix these warnings.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I1d4535205426dd9a6346f53ff159221cf5cd899a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b43f8f24bb7cb33ad0411c24616da66663c2e3e
Original-Change-Id: I71eafd91d30d5f50e6211368f0bbc517c8085892
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302163
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Since the TPM _CRS method creates named objects it needs
to be serialized to prevent a warning in recent iasl.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I59a52552ab24b7d9c9928331aa8c8d19f54fd1b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a5c474c94980661573a99eb94d5f661f2d0114b
Original-Change-Id: Ie9d164ea8781304dd0bf1833d182d7c601b8e18d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302162
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
In order to wake from S0ix the kernel needs to know that the
keyboard interrupt is wake capable. Using IRQNoFlags does not
allow the wake capability to be reported.
For normal S3 this does not matter as the EC is the one handling
the keyboard wake event. For S0ix the EC does not need to be
involved in this particular wake event.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=echo freeze > /sys/power/state and wake from keyboard
Change-Id: I7175d2ea98f8a671765897de295df7b933151fc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 645f1cd96c35f42aa7c40ff473b15feb619b0373
Original-Change-Id: Ia89c30c51be9db7b814b81261463d938885325fd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/301441
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11712
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
$(src) is not defined when building directly from the cbfs directory (that is,
when building cbfs as standalone, running make in the cbfs directory), so we
need to define the path to the commonlib include path relative to $(top).
Change-Id: I72e80b030d4a156ec653ded5ab1457b16f612526
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11706
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
While the romstage code flow is not consistent across all
mainboards/chipsets there is only one way of running ramstage
from romstage -- run_ramstage(). Move the
timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. TS_END_ROMSTAGE still present in
timestamp table.
Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This removes the dependency on chromeos and vboot for the sw write protect state
function: vboot_get_sw_write_protect, renamed to get_sw_write_protect_state to
both reflect this change and become consistent with the definition of
get_write_protect_state that is already in use.
Change-Id: I47ce31530a03f6749e0f370e5d868466318b3bb6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When building for ChromeOS, it is expected that Coreboot will only occupy the
first MiB of the SPI flash, according to the veyron fmap description.
Otherwise, it makes sense to use the full ROM size.
Change-Id: I168386a5011222866654a496d8d054faff7a9406
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11117
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Unlike the other stages, the payload requires virtual memory to be set up
and also a privelege level change.
Change-Id: Ibbe2a55f7719d917f121a53a17c6d90e6b2ab3d1
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/11699
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Currently coreboot expects the loader to clear the bss section
for all stages. i.e. stages don't clear their own bss. On ARM
SoCs the BootROM would be responsible for this. To do that
one needs to include the bss section data (all zeros) in the
bootblock.bin file. This was previously being attempted by
keeping the .bss info in the .data section because objcopy
happened zero out non-file allocated data section data.
Instead go back to linking bootblock with the bss section
but mark the bss section as loadable allocatable data. That
way it will be included in the binary properly when objcopy
-O binary is emplyed. Also do the same for the data section
in the case of no non-zero object values are in the data
section.
Without this change the trick of including .bss in .data
was not working when there wasn't a non-zero value object
in the data section.
BUG=None
BRANCH=None
TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains
the cleared bss.
Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit adds read/write functions for both big and
little endian interpretations. Additionally there are
variants that allow an offset to be provided into the
source buffer.
BUG=None
TEST=Wrote test harness for functions. Also booted ARM QEMU
through end of payload.
Change-Id: If44c4d489f0dab86a73b73580c039e364c7e517d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11677
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
endian.h lives in under sys on the BSDs. Replace htole32() with
swab32(htonl(..)) as a proxy for little endian operations.
Change-Id: I84a88f6882b6c8f14fb089e4b629e916386afe4d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Since fmap doesn't come with a checksum, we resort to a number of
heuristics to determine if a given location hosts an fmap (instead of
another data structure that happens to store the fmap magic string at
the right location).
The version test is particularly effective against strings containing
the magic (which either terminate with 0, or have some other ASCII data,
but rarely a '\001' byte inside the string).
Change-Id: Ic66eb0015c7ffdfe25e0054b7838445b8ba098e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11690
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The command adds a new cbfs file, fills in the CBFS meta data in cbfs
master header format, then points the master header pointer (which
resides at the last 4 bytes of the CBFS region) to the data area of the
new file.
This can leak some space in CBFS if an old-style CBFS with native master
header gets the treatment, because a new header is created and pointed
at. flashmap based images have no such header, and the attempt to create
a second file with the (hardcoded) name will fail.
Change-Id: I5bc7fbcb5962b35a95261f30f0c93008e760680d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11628
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is more in line with how fmd/fmap specify ranges.
Change-Id: Iecf8250e84d6eb267711ded446909b21147f1a9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Let's move x86 style bootblocks (and later the others) and the master header
into the CBFS structure. Prepare for this by adding file types.
Change-Id: I1b4149c7f3b8564ee358a2c18ba91e6a7a6797da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11627
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
cbfs_file_find_attr(file, tag) finds the first attribute of file with
the given tag.
Change-Id: I78ee3b996b4b086605244c5d7d57ef7e3fc1db47
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11678
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
fileno() is a mess on some operating systems. Don't
deliberately convert between FILE * and file handles.
Change-Id: I5be62a731f928333ea2e5843d81f541453fdb396
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11636
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Decompression is handled transparently within cbfs_get_file_content:
const char *name = "foo.bmp";
void *dst = cbfs_get_file_content(media, name, type, NULL);
To keep things consistent, a couple of API changes were necessary:
- cbfs_get_file_content always returns a copy of the data, even for
uncompressed files. It's the callers responsibility to free the
memory.
- same for cbfs_load_payload and cbfs_find_file.
- cbfs_load_optionrom doesn't take a "dest" argument anymore but always
returns a copy of the data, for compressed and uncompressed files.
Like with cbfs_get_file_content, the caller is responsible to free it.
It also decompresses based on extended file attributes instead of the
cbfs_optionrom subheader that libpayload specified but that (AFAIK)
nobody ever used, given that there's not even tooling for that.
Change-Id: If959e3dff9b93c6ae45ec7358afcc7840bc17218
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10938
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The dynamically sized region after struct cbfs_file doesn't contain only
the file name anymore.
Change-Id: I3241cb2f0cbec3fcf4d3c27d638e2847e43f4761
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11676
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This comes from cbfstool (GPL) into libpayload (BSD-l), but I could have
just as well written it in libpayload first.
Change-Id: I86baefe5c299125a4733fa20523efd5d06de7182
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11675
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use the common ACPI _SWS code and provide a function to fill out
the wake source data.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-samus coreboot
Change-Id: I3d2ceca8585314122b78317acb7f848efb6e9a14
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d8afaee8e27222639c5e249d53be28cddcb78f72
Original-Change-Id: Ie551ecf3397c304216046cc2046c071f7b766e5f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298168
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11647
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Switch braswell to use the common code for filling out the NVS
data used by ACPI _SWS methods. This code was out of date on
braswell so also update it to provide the \_GPE.SWS method.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-cyan coreboot
Change-Id: I41c2a141c15f78dc0d9482954c157f81bd0759fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c4d1ee76f337addf687ca5a9ae2da5e898c2de0
Original-Change-Id: I44424784d5d3afb06d0d58c651a9339c7b77418c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298230
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11649
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable and use the common code for filling out the NVS data used
by the _SWS methods. Add a function to provide the wake source
data. With Deep S3 enabled skylake does not retain the contents
of the PM1_EN register so instead just select the wake related
events in PM1_STS.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=tested on glados by checking for valid _SWS string in
/sys/firmware/log after suspend/resume. Wake sources that were
tested are RTC, power button, keypress, trackpad, and wifi.
Change-Id: I93a4f740f2e2ef1c34e948db1d8e273332296921
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cb4d4705b87ef7169f1979009c34a58de93c4ef0
Original-Change-Id: Ib6b4df09ea3090894f09290d00dcdc5aebc3eabb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298169
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11648
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is a follow-up patch to
https://chromium-review.googlesource.com/#/c/286877, after fsp support
is landed in v1.5.
BUG=chrome-os-partner:42975
BRANCH=none
TEST=execute "mosys memory spd print all" on glados and kunimitsu
Change-Id: I949e287372b190affac36a0efde8a30402eecdc8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 71a2e1838ff8bbaa358c167dad905b63d23c43fa
Original-Change-Id: I64103af4f8456a053a955845a067062122f47af3
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298967
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Assign GPE DW0 to GPP_B block
- Enable GPP_B16 as ACPI_SCI for wake
- Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW
Note that current designs cannot wake from Deep S3 via wifi.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I1fe15a5a9b3d868a0e4f1bfb102b69f024c3aa48
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de9dfee840246866a8dcca2e1c42c0292e820529
Original-Change-Id: I926d74b6bcf6d64c3db61ed23d7c17b51a98b052
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298232
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11651
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Assign GPE DW0 to GPP_B block
- Enable GPP_B16 as ACPI_SCI for wake
- Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW
Note that current designs cannot wake from Deep S3 via wifi.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=tested on glados:
1-disable deep s3 in devicetree.cb
2-enable magic packet with "iw phy phy0 wowlan enable magic-packet"
3-powerd_dbus_suspend to go to S3
4-wake system with magic packet
Change-Id: I989768615e9da8ecf6354852d2db7aae8069aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 894354c5bfd499b911b7f89310c48b503dbaadc2
Original-Change-Id: I9a7a317fc2eccc70fdb4862843de1a654fbc2eee
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11650
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The values are taken from latest BWG as well fsp src.
BRANCH=none
BUG=chrome-os-partner:45208
TEST=Built and boot on kunimitsu
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Change-Id: Ia6bd336a71b0313801b59990c78822fa0d789e36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c955ab43245153d76932daa527f1b5ebea859164
Original-Change-Id: I3f7307951753c2bbe6319f627a82a93359c4e61b
Original-Reviewed-on: https://chromium-review.googlesource.com/299480
Original-Commit-Ready: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order for easier consumption in userland tools split the
FSP 1.1 relocation logic into a single file w/ an aptly named
function name.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I49998b8621611c638375bc90884e80d0cd3bdf78
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc898e1c528df60683575d553d6194a1e8200afa
Original-Change-Id: I736c0059d43f6d0be4fdb6e6f47cdb5c189a7ae8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298833
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11665
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Patrick Georgi