USBPHY_COMPBG needs to be configured by project
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
CQ-DEPEND=CL:208557
Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208731
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75
Reviewed-on: http://review.coreboot.org/8217
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the normal mode case these settings aren't overwritten by
the VBIOS because the VBIOS does not run. Therefore, the settings
need to align with what the VBIOS programs so that there is a
consistent panel power sequencing.
BUG=chrome-os-partner:28267
BRANCH=baytrail
TEST=Built and booted. Noted settings set by firmware for both dev
and normal mode match.
Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196822
Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf
Reviewed-on: http://review.coreboot.org/7846
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
With following settings
1.Coreboot 25Mhz
2.Maxim codec configured with MCLK=25Mhz
2.I2C 400Khz fixed
4.Including Enable/Disable SHDN bit when LRCLK starts/Stops
5.Removed PLL toggle workaround routine.
audio playing is smooth before/after S3, no noise when recording so change
MCLK from 19.2 back to 25Mhz.
BUG=chrome-os-partner:26948
BRANCH=firmware-rambi-5216
TEST=test audio play and record on Rambi, works fine.
Change-Id: I5602feb39721344feab837ff4a3a18309a47a6a6
Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/193881
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit bfe1d535aa2f20a32e163abeb99f3d657e2b43ab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7219
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
baytrail: Change all GPIO related pull resistors from 10K to 20K
Reviewed-on: https://chromium-review.googlesource.com/187570
(cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e)
baytrail: workaround kernel using serial console on resume
Reviewed-on: https://chromium-review.googlesource.com/188011
(cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469)
baytrail: allow dirty cache line evictions for SMRAM to stick
Reviewed-on: https://chromium-review.googlesource.com/188015
(cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca)
baytrail: Optionally pull up TDO and TMS to avoid power loss in S3.
Reviewed-on: https://chromium-review.googlesource.com/188260
(cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6)
rambi: always load option rom
Reviewed-on: https://chromium-review.googlesource.com/188721
(cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9)
baytrail: use new chromeos ram oops API
Reviewed-on: https://chromium-review.googlesource.com/186394
(cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594)
rambi: always show dev/rec screens on eDP connected panel
Reviewed-on: https://chromium-review.googlesource.com/188731
(cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95)
baytrail: stop e820 reserving default SMM region
Reviewed-on: https://chromium-review.googlesource.com/189084
(cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24)
baytrai: update MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/189196
(cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970)
rambi: Put LPE device into ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/189371
(cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413)
baytrail: DPTF: Enable mainboard-specific PPCC
Reviewed-on: https://chromium-review.googlesource.com/189576
(cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612)
baytrail: Add config option for PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189994
(cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5)
rambi: Enable PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189995
(cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6)
Squashed 13 commits for baytrail/rambi.
Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6957
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Not used currently on rambi board. Disable in case it
saves power.
BUG=chrome-os-partner:23862
BRANCH=none
TEST=build and boot on rambi
Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5020
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
With the ACPI GNVS exported and depthcharge changed to
initialize eMMC in ACPI mode we can now put the SCC
devices into ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot on rambi, test eMMC and SD card
Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5018
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
These are the values that are seen with VBIOS and
may need tweaked for derivative panels.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179365
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5001
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The rambi board can only meet the SD card 2.0 specification.
Therefore, the controller capabilities need to be overridden
to match.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows
high speed as maximum timing as well as 3.3V signal voltage.
Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179415
Reviewed-on: http://review.coreboot.org/4998
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For some reason HDA can now be disabled. It's unclear what changes
in the baytrail code allowed this to happen, sadly.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Noted hda is not in lspci.
Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176394
Reviewed-on: http://review.coreboot.org/4961
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
- a few clock gating bits were set improperly and were preventing
the system from transitioning out of S0 state.
- the XHCC registers were not getting the top byte set properly
which includes things like DMA write request size and request
boundary crossing control. This was causing memory corruption.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot kernel from USB on rambi with XHCI driver
Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4933
Tested-by: build bot (Jenkins)
This adds the EHCI driver back to libpayload and configures
the devicetree to route ports to EHCI.
This is hopefully just temporary until the issues with XHCI
can be worked out.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot from USB on rambi
Change-Id: I0549661f5e5fd83477f4839a05e7e21175b24b64
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175513
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4931
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The EC LPC init function needs to run to enable the internal keyboard.
I needed this to confirm that it is just USB keyboards that are causing
all sorts of issues.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=boot to recovery screen and hit tab
Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175207
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4915
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Enable first SATA port in Rambi device tree.
BUG=chrome-os-partner:23643
TEST=TEST=Manual, in dev mode. Verify on rambi that SATA disk is
detected, and kernel is found + booted.
Change-Id: Ic0cb5f9ff17ca0f6cc7941f203b9338df200811d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174916
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4914
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Add the on-board devices in the SoC to the device tree.
Also, disable the unused devices aside from TXE and HDA.
Those particular devices cause the system to shut down
when they are disabled.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Built and booted through depthcharge. Noted the calls to the
southcluster disable function.
Change-Id: I482c1c9609833054aeb2948144af54b57d3df086
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174645
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4912
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
There's some baked in assumptions internal to coreboot
that the BSP's cpu device exists in the device tree. Therefore
provide one in the device tree.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Compiled and booted with other changes.
Change-Id: I22ba10964760ee8efbc5bbd5d4ce65daf31b3839
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173702
Reviewed-on: http://review.coreboot.org/4887
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
