Tranferring a bit to DC through Skuid to update the regulator
node in order to support pro and non-pro
BUG=b:248187555
TEST=Validate boards are detected correctly on PRO and NON_PRO SKUs
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Change-Id: Iec392c03c2e2c79d20b1fcb79236ca9e048bfd07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68385
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The API socinfo_pro_part() returns 1 for Pro and 0 for NON_PRO SKUs. To
reduce the binary footprint for chipinfo structure, change its members
range from uint32_t to uint16_t. Add helper functions for reading and
matching jtagid. Modified socinfo_modem_supported() API to utilize
helper functions.
BUG=b:248187555
TEST=Validate boards are detected correctly on PRO and NON_PRO SKUs
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Change-Id: Id9f23696384a6c1a89000292eafebd8a16c273ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68384
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When printing a date, genbuild_h is printing it as two digits, using
a leading zero if the value is below 10.
The shells like bash, dash, etc don't fully import the numbers 08 and
09 when using the printf conversion specifier %d. They apparently
interpret the numbers as octal and only import the leading 0, dropping
the 8 or 9. This isn't an issue for 01 to 07, because those are valid
octal numbers, so %d prints them without an issue. Because 08 and 09
are not valid octal, various shells return different errors:
Example shell returns for 'printf "%d" 08':
bash: printf: 08: invalid octal number
dash: printf: 08: not completely converted
fish: 008: value not completely converted
yash: printf: `08' is not a valid integer
sash: printf: 08: not completely converted
To prevent this, just print all of the values as strings.
zsh just seems to ignore the possibility of the value being octal
and prints the value as a single digit 0-9.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I97b6aa74d74379f6bdc1f0fceecc8002cc36ca09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70478
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct touchpad setting to make touchpad function workable.
BUG=b:261393412
BRANCH=firmware-brya-14505.B
TEST=Built and verified touchpad function
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3c816ce4293ae362f0e5c18171f296d42b4307c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70440
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add the HIDs that Windows uses for the DPTF driver.
Change-Id: Ic0cb4a45b5ebaf777a09bed1e5836e8afd873657
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66013
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 4c3749884d ("cpu/x86/mtrr: Print cpu index number when set up
MTRRs for BSP/APs") added the CPU index number to some prints, but used
%x as format specifier. The cpu_index() call however has a return type
of unsigned long, so %lx needs to be used instead. For consistency, also
change the type of the cpu_idx local variable in commit_fixed_mtrrs to
unsigned long and adjust the printk format specifier accordingly.
TEST=The code builds again on my computer
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b68f8355932b2b75db5f453a0a735185b24b02f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70664
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5db2587ff74432a0ce1805d8d7ae76d650693eea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
- Use `size_t' for iteration index variables
- Use the `VGA_COLUMN' macro definition instead of the hard-coded
value
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Verified on Skolas
Change-Id: I1d6595871363ec7602219e72d1260df3722f64de
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70453
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
MTRR setup will be assigned to all APs. It's hard to debug
race condition without showing apic id.
Change-Id: Ifd2e1e411f86fa3ea42ed50546facec31b89c3e1
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
HEC1 and SRAM are defined in src/soc/intel/alderlake/chipset.cb:
device pci 16.0 alias heci1 on end
device pci 14.2 alias shared_sram off end
This patch adds entries for these devices in DSDT to prevent "AE_NOT_FOUND" errors from kernel
TEST=Built and tested on brya to confirm errors are not seen.
BUG=b:260258765
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ifd9c509e82ccf02a7801d51513597fe2e5d9e631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70454
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both eDP and MIPI interfaces are supported in geralt project, so we can
initialize the different displays according to the panel ID.
This patch also generalizes the display initialization. So
`configure_edp_panel_backlight` and `power_on_edp_panel` can be removed.
BUG=b:244208960
TEST=test firmware display pass for MIPI panel on MT8188 EVB.
Change-Id: I7ae9318f56c70446516e197635acaffb8197ab53
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70406
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both eDP and MIPI interfaces are supported in geralt project. Therefore,
we put the eDP panel data in panel_geralt.c to have the consistent
interface `get_active_panel` function.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ib35b3cab31bae4109b9715242201425580339536
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70405
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are eDP and MIPI panels supported in geralt. We put the panels'
specified functions - `power_on()` and `configure_panel_backlight()` in
panel_geralt.c. Also provide the common interface `get_active_panel()`
in panel.c to generalize the display initialization. Since each board
may support a different set of MIPI panels, we put the MIPI data in a
separate file panel_geralt.c.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ie928759e020a916f29f0364201a3cf202dc512c3
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The EN_PP3300_SD gpio (GPP_H13) was configured as a no-connect, but
should be configured as an output.
This change configures GPP_H13 on brya0 and skolas to be an output.
BUG=b:261901759
BRANCH=firmware-brya-14505.B
TEST="emerge-brya coreboot chromeos-bootimage" and verify skolas boots.
Change-Id: Ia3f01e877a5fea3af9a6e746523ed395f3af3b8a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70512
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Morgana does not have emmc, so do not select it.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib75618c137e825befc7384275f1a4ef9b5137b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70477
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch enables CPPCv3 support for Intel Meteor Lake which is based
on hybrid core architecture.
TEST=Build code for Rex.
Change-Id: Iddf15f01a401eedf695f2dd07fbee0b643d143e2
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70511
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sudheer Kumar Amrabadi