Now that we have timestamps in pre-RAM stages, let's actually make use
of them. This patch adds several timestamps to both the bootblock and
especially the verstage to allow more fine-grained boot time tracking.
Some of the introduced timestamps can appear more than once per boot.
This doesn't seem to be a problem for both coreboot and the cbmem
utility, and the context makes it clear which operation was timestamped
at what point.
Also simplifies cbmem's timestamp printing routine a bit, fixing a
display bug when a timestamp had a section of exactly ",000," in it
(e.g. 1,000,185).
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Falco, confirmed that all timestamps show
up and contained sane values. Booted Storm (no timestamps here since it
doesn't support pre-RAM timestamps yet).
Change-Id: I7f4d6aba3ebe3db0d003c7bcb2954431b74961b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a2ce81722aba85beefcc6c81f9908422b8da8fa
Original-Change-Id: I5979bfa9445a9e0aba98ffdf8006c21096743456
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234063
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9608
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have known for a while that the old x86 model of calling init_timer()
in ramstage doesn't make sense on other archs (and is questionable in
general), and finally removed it with CL:219719. However, now timer
initialization is completely buried in the platform code, and it's hard
to ensure it is done in time to set up timestamps. For three out of four
non-x86 SoC vendors we have brought up for now, the timers need some
kind of SoC-specific initialization.
This patch reintroduces init_timer() as a weak function that can be
overridden by platform code. The call in ramstage is restricted to x86
(and should probably eventually be removed from there as well), and
other archs should call them at the earliest reasonable point in their
bootblock. (Only changing arm for now since arm64 and mips bootblocks
are still in very early state and should sync up to features in arm once
their requirements are better understood.) This allows us to move
timestamp_init() into arch code, so that we can rely on timestamps
being available at a well-defined point and initialize our base value as
early as possible. (Platforms who know that their timers start at zero
can still safely call timestamp_init(0) again from platform code.)
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit.
Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa
Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234062
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI
read and write transactions. Limiting transfer size in the wrapper
allows to provide the API user with unlimited transfer size
transactions.
The tranfer size limitation is added to the spi_slave structure, which
is set up by the controller driver. The value of zero in this field
means 'unlimited transfer size'. It will work with existion drivers,
as they all either keep structures in the bss segment, or initialize
them to all zeros.
This patch addresses the problem for reads only, as coreboot is not
expected to require to write long chunks into SPI devices.
BRANCH=none
BUG=chrome-os-partner:32441, chrome-os-partner:31438
TEST=set transfer size limit to artificially low value (4K) and
observed proper operation on both Pistachio and ipq8086: both
Storm and Urara booted through romstage and ramstage.
Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45
Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232239
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most Baytrail based devices MMIO registers are reported in ACPI
space and the device's PCI config space is disabled. The PCI config
space is required for many "legacy" OSs that don't have the ACPI
driver loading mechanism. Depthcharge signals the legacy boot
path via the SMI 0xCC and the coreboot SMI handler can switch the
device specific registers to re-enable PCI config space.
BUG=chrome-os-partner:30836
BRANCH=None
TEST=Build and boot Rambi SeaBIOS.
Change-Id: I87248936e2a7e026f38c147bdf0df378e605e370
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dbb9205ee22ffce44e965be51ae0bc62d4ca5dd4
Original-Change-Id: Ia5e54f4330eda10a01ce3de5aa4d86779d6e1bf9
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219801
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
Original-Tested-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/9459
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This will allow vboot2 to continue refactoring without breaking
coreboot, since there's now only a single file which needs to stay in
sync.
BUG=chromium:423882
BRANCH=none
TEST=emerge-veyron_pinky coreboot
CQ-DEPEND=CL:233050
Original-Change-Id: I74cae5f0badfb2d795eb5420354b9e6d0b4710f7
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233051
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit df55e0365de8da85844f7e7b057ca5d2a9694a8b)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I999af95ccf8c326f2fd2de0f7da50515e02ad904
Reviewed-on: http://review.coreboot.org/9446
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This adds the RAM config code to the coreboot tables. The purpose is
to expose this information to software running at higher levels, e.g.
to print the RAM config coreboot is using as part of factory tests.
The prototype for ram_code() is in boardid.h since they are closely
related and will likely have common code.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=tested w/ follow-up CLs on pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Idd38ec5b6af16e87dfff2e3750c18fdaea604400
Original-Reviewed-on: https://chromium-review.googlesource.com/227248
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 77dd5fb9347b53bb8a64ad22341257fb3be0c106)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe7044cafe0a61214ac2d7fea5f7255b2c11829b
Reviewed-on: http://review.coreboot.org/9438
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This adds gpio_base2_value() which reads an array of 2-state
GPIOs and returns a base-2 value, where gpio[0] represents the
least significant bit.
BUG=none
BRANCH=none
TEST=tested with follow-up patches for pinky
Change-Id: I0d6bfac369da0d68079a38de0988c7b59d269a97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27873b7a9ea237d13f0cbafd10033a8d0f821cbe
Original-Change-Id: Ia7ffc16eb60e93413c0812573b9cf0999b92828e
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228323
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9412
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch makes a few cosmetic changes:
- Rename tristate_gpios.c to gpio.c since it will soon be used for
binary GPIOs as well.
- Rename gpio_get_tristates() to gpio_base3_value() - The binary
version will be called gpio_base2_value().
- Updates call sites.
- Change the variable name "id" to something more generic.
BUG=none
BRANCH=none
TEST=compiled for veyron_pinky and storm
Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f
Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228324
Reviewed-on: http://review.coreboot.org/9411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Retrieval of the MAC address from the VPD is a Chrome OS specific
feature, required just on one platform so far. There is no need to
look for the MAC address in the VPD on all other Chrome OS boards.
BRANCH=storm
BUG=chromium:417117
TEST=with the upcoming patch applied verified that MAC addresses still
show up in the device tree on storm
Change-Id: If5fd4895bffc758563df7d21f38995f0c8594330
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb4906ac559634321a01b4814f338611b9e98b2b
Original-Change-Id: I8e6f8dc38294d3ab11965931be575360fd12b2fc
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223796
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9398
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add GENERIC_UDELAY Kconfig option so that a generic
udelay() implementation is provided utilizing the
monotonic timer. That way each board/chipset doesn't
need to duplicate the same udelay(). Additionally,
assume that GENERIC_UDELAY implies init_timer()
is not required.
BUG=None
BRANCH=None
TEST=Built nyan, ryu, and rambi. May need help testing.
Change-Id: I7f511a2324b5aa5d1b2959f4519be85a6a7360e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a85fbcad778933d13eaef545135abe7e4de46ed
Original-Change-Id: Idd26de19eefc91ee3b0ceddfb1bc2152e19fd8ab
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219719
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds an mmu_config_range_kb() function, which can set memory
types at the 4KB level by chaining a fine-grained page table to an
existing superpage entry. It is only intended for special cases where
this level of precision is really necessary and therefore comes with a
few practical limitations (the area for each invocation must be confined
within a single superpage, and you are not allowed to remap the same
region with mmu_config_range() again later). Since the fine-grained page
tables need some space, boards intending to use this feature must define
a TTB_SUBTABLES() region in their memlayout.ld.
BUG=chrome-os-partner:32848
TEST=Booted both Veyron_Pinky (normal) and Nyan_Blaze (LPAE), ensured
that they still work. Checksummed the page tables with and without this
patch, confirmed that they end up equal. Hacked in some subtable test
entries, hexdumped all tables and manually confirmed that they look as
expected.
Change-Id: I8c3eb7c2eb9c82e2abc5f2c0dda91f5b2eee7023
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f13e60cf5509b9a63fb7b8d84846daf889dc1b7
Original-Change-Id: Iedf7ca435ae337ead85115200d6987fb0d4828d7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223781
Reviewed-on: http://review.coreboot.org/9341
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
This patch adds the macros __ROMSTAGE__ and __RAMSTAGE__ which get
predefined in their respective stages by make, so that we have one
specific macro for every stage. It also renames __BOOT_BLOCK__ and
__VER_STAGE__ to __BOOTBLOCK__ and __VERSTAGE__ for consistency.
This change is intended to provide finer control and clearer
communication of intent after we added a new (optional) stage that falls
under __PRE_RAM__, and will hopefully provide some robustness for the
future (we don't want to end up always checking for romstage with #if
defined(__PRE_RAM__) && !defined(__BOOT_BLOCK__) &&
!defined(__VER_STAGE__) && !defined(__YET_ANOTHER_PRERAM_STAGE__)). The
__PRE_RAM__ macro stays as it is since many features do in fact need to
differentiate on whether RAM is available. (Some also depend on whether
RAM is available at the end of a stage, in which case #if
!defined(__PRE_RAM__) || defined(__ROMSTAGE__) should now be
authoritative.)
It's unfeasable to change all existing occurences of __PRE_RAM__ that
would be better described with __ROMSTAGE__, so this patch only
demonstratively changes a few obvious ones in core code.
BUG=None
TEST=None (tested together with dependent patch).
Change-Id: I6a06d0f42c27a2feeb778a4acd35dd14bb53f744
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a4ad042746c1d3a7a3bfda422d26e0d3b9f9ae42
Original-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219172
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9304
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Drop the inner underscore for consistency. Follows the
commit stated below.
Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172
Reviewed-on: http://review.coreboot.org/9290
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
This patch adds some simple constants to more easily write and do math
with frequencies, analogous to the existing KiB, MiB and GiB constants
for sizes.
BUG=None
TEST=Compiled Veyron_Pinky.
Original-Change-Id: I4a1927fd423eb96d3f76f7e44b451192038b02e0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221800
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 41bb8026818b4381d4a6d43d2d433c207c3971bc)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1e708b0aa53533c9ab999793ca2273c6dc68b5f6
Reviewed-on: http://review.coreboot.org/9253
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Extend lib/reg_script.c to use a platform table to declare
additional platform specific register access routine functions.
REG_SCRIPT_TYPE_PLATFORM_BASE is the starting value for platform
specific register types. Additional register access types may be
defined above this value. The type and access routines are placed
into reg_script_type_table.
The Baytrail type value for IOSF was left the enumeration since it
was already defined and is being used for Braswell.
BRANCH=none
BUG=None
TEST=Use the following steps to test:
1. Build for a Baytrail platform
2. Build for the Samus platform
3. Add a platform_bus_table routine to a platform which returns the
address of an array of reg_script_bus_entry structures and the
number of entries in the array.
Change-Id: Ic99d345c4b067c52b4e9c47e59ed4472a05bc1a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2d9fecf4287dff6311a81d818603212248f1a248
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/215645
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: I7cd37abc5a08cadb3166d4048f65b919b86ab5db
Original-Reviewed-on: https://chromium-review.googlesource.com/229612
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9279
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The rmod_stage_load structure contained the same fields
as struct prog. In order to more closely integrate with the
rest of program loading use struct prog.
Change-Id: Ib7f45d0b3573e6d518864deacc4002802b11aa9c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9143
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Instead of having different structures for loading
ramstage and payload align to using struct prog.
This also removes arch_payload_run() in favor of
the prog_run() interface.
Change-Id: I31483096094eacc713a7433811cd69cc5621c43e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8849
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The prog_run() function abstracts away what is required
for running a given program. Within it, there are 2
calls: 1. platform_prog_run() and 2. arch_prog_run().
The platform_prog_run() allows for a chipset to intercept
a program that will be run. This allows for CPU switching
as currently needed in t124 and t132.
Change-Id: I22a5dd5bfb1018e7e46475e47ac993a0941e2a8c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8846
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The struct prog serves as way to consolidate program
loading. This abstraction can be used to perform more
complicated execution paths such as running a program
on a separate CPU after it has been loaded. Currently
t124 and t132 need to do that in the boot path. Follow
on patches will allow the platform to decide how to
execute a particular program.
Note: the vboot path is largely untouched because it's
already broken in the coreboot.org tree. After getting
all the necessary patches pushed then vboot will be
fixed.
Change-Id: Ic6e6fe28c5660fb41edee5fd8661eaf58222f883
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8839
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Chrome OS devices firmware usually includes an area called VPD (Vital
Product Data). VPD is a blob of a certain structure, in particular
containing freely defined variable size fields. A field is a tuple of
the field name and field contents.
MAC addresses of the interfaces are stored in VPD as well. Field names
are in the form of 'ethernet_macN', where N is the zero based
interface number.
This patch retrieves the MAC address(es) from the VPD and populates
them in the coreboot table so that they become available to the
bootloader.
BUG=chrome-os-partner:32152, chromium:417117
TEST=with this and other patches in place the storm device tree shows
up with MAC addresses properly initialized.
Change-Id: I955207b3a644cde100cc4b48e51a2ab9a3cb1ba0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1972b9e97b57cc8503c5e4dc496706970ed2ffbe
Original-Change-Id: I12c0d15ca84f60e4824e1056c9be2e81a7ad8e73
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219443
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds plumbing necessary to ensure that the CBMEM WiFi
calibration blobs entry, if present, is referenced if the coreboot
table.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=none - the entry is not yet in the CBMEM
Change-Id: I072f2368b628440b6fe84f310eebc1ab945f809e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d0330280369753a6520196425e6dfc7d7bd226a3
Original-Change-Id: I04d52934ad1c5466d0d124b32df5ab17c0f59686
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9232
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mosys will use this field to identify system
BRANCH=none
BUG=chromium:359155
TEST=build ok, use dmidecode to check whether data is
written correctly
Change-Id: I461215c012b6ad712b3f813a3928e90a23bf54f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7adbdab761cd7b4bda0a43e7b1c4070de26f150a
Original-Change-Id: Icfbd4c61fc49a9cb3d3ecd2b622339957963150c
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217400
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9230
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In commit 72a8e5e751 the
Makefile's were updated to use named types for cbfs
file addition. However, the call sites were not checked to
ensure the types matched. Correct all call sites to use the
named types.
Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9195
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
1.) Allow MCT information structures to be copied to cbmem.
2.) Retrieve DIMM vendor, model, and serial information.
3.) Allow maximum installable memory to be set via devicetree.
Change-Id: I0aecd2fb69ebad0a784c01d40ce211f6975a3ece
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9137
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The serialized format of CBFS is separate from the APIs
used to traverse and read from CBFS. Separate those out
so they can be consumed as a standalone header.
Change-Id: I09f71d9c474ee9f23a62b0062ffa777963d1a4dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9125
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Instead of having 2 different functions to call when a program
is loaded provide a single callback with flags parameter. The
previous callbacks for cache management routines did this:
for_each_program_segment:
arch_program_segment_loaded(start, size);
arch_program_loaded();
Now, use one callback instead:
for_each_program_segment:
arch_segment_loaded(start, size, SEG_FINAL?);
Change-Id: I3811cba92e3355d172f605e4444f053321b07a2a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's no need to keep track of struct payload within
the boot state machine. It is completely contained within
the payload loader module.
Change-Id: I16fcecf43d7fb41fc311955fdb82eabbd5c96b11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8836
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The functions related to caching ramstage were in cbfs.h.
Now that the loading code is separate move those declarations
to the common program_loading.h.
Change-Id: Ib22ef8a9c66e1d2b53388bceb8386baa6302d28b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The run_address() function is not used. Remove it.
Change-Id: I96de4cf0a529b08943ff8281cedead642eb415de
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9124
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
There was a hacky and one-off spin table support in tegra132.
Make this support generic for all arm64 chips.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Ran with and without secure monitor booting smp into the kernel.
Change-Id: I3425ab0c30983d4c74d0aa465dda38bb2c91c83b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 024dc3f3e5262433a56ed14934db837b5feb1748
Original-Change-Id: If12083a9afc3b2be663d36cfeed10f9b74bae3c8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218654
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9084
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GIC is ARM's "Generic Interrupt Controller". This
change essentially implements the rudimentary support
for a GICv2 implementation that routes all interrupts
to Group1. This should also work for GICv1 with security
extensions.
BUG=chrome-os-partner:31945
BRANCH=None
TEST=Built and booted kernel using the code.
Change-Id: I9c9202c1309ca9e711e00d742085a6728552c54b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d1cd9b6b76035af107b7dc876f90777698162d34
Original-Change-Id: I4c5b84bfe888ac33fa01c8d64a3dffe1b5ddc823
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217512
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9075
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Two weak functions were added so that architecture specific operations
on each segment of payload or stage can be performed.
Each architecture must define its own operations, otherwise the
behavior will default to do-nothing functions.
This patch has been updated by to fit more in line with
how program loading is currently being done. The API is the
same as the original, but all call sites to stages/payloads
have been updated. This is known to break any archs that use
rmodule loading that needs cache maintenance. That will be fixed
in a forthcoming patch. Also, the vboot paths are left as is
for easier upstreaming of the rest of the vboot patches.
Original-Change-Id: Ie29e7f9027dd430c8b4dde9848fa3413c5dbfbfa
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/239881
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit c82c21ce87a4c02bd9219548a4226a58e77beef0)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ifcee5cd9ac5dbca991556296eb5e170b47b77af7
Reviewed-on: http://review.coreboot.org/8837
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add smbios type 17 which can optionally be implemented
at the platform or mainboard level
In order to create SMBIOS type17, you will need to fill
memory_info data
BUG=None
BRANCH=None
TEST=Compile successfully on rambi and samus
Boot to chromeOS on samus and rambi
Original-Change-Id: Ie4da89135c879d7a687305d423103fcfcbb96e3f
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210005
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 634b899ba41242caa800d7b570f3a339c738db77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I61d1e8b1d32d43f0011b0f93966d57646ea0eb63
Reviewed-on: http://review.coreboot.org/8955
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
nyan blaze fails to boot because tristates of the board id are interpreted in
the reverse order. this change fixes it.
BUG=none
TEST=Booted Blaze to Linux. Built firmware for Storm.
Branch=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I4ff8a15cf62869cea22931b5255c3a408a778ed2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3f59b13d615a8985edf2029d89af05e95aefad33
Original-Change-Id: I6d81092becb60d12e1cd2a92fc2c261da42c60f5
Original-Reviewed-on: https://chromium-review.googlesource.com/211700
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/8980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The name was changed due to review comments misunderstanding, it
should be restored to properly convey what the function does.
BUG=chrome-os-partner:30489
TEST=verified that Storm still properly reports board ID
Change-Id: Iba33cf837e137424bfac970b0c9764d26786be9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c0fff28c6ebf255cb9cf9dfe4c961d7a25bb13ff
Original-Change-Id: I4bd63f29afbfaf9f3e3e78602564eb52f63cc487
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211413
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I broke cbfs loading with commit 358901. As multiple
functions are being reused one needs to ensure there is
always a cbfs media object allocated on the stack and
initialized. Ya for no common writable globals.
TEST=Ran qemu-armv7. CBFS loading works again.
Change-Id: Ibd047af7dcd8575e6203651471079fc2042da282
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8973
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
this change makes coreboot initialize kernel space and backup space in the tpm
when no firmware space is found in the tpm.
BUG=chrome-os-partner:32410
TEST=Forced factory initialization and verified it went through without errors.
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I777e3cb7004870c769163827543c83665d3732b9
Original-Reviewed-on: https://chromium-review.googlesource.com/220412
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit d8c0c407bf0fed60d76441ada7bedd36f6fc3a38)
Change-Id: Icc3779125262b4499e47781991ebbf584abf074a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This code ports antirollback module and tpm library from platform/vboot_reference.
names are modified to conform to coreboot's style.
The rollback_index module is split in a bottom half and top half. The top half
contains generic code which hides the underlying storage implementation.
The bottom half implements the storage abstraction.
With this change, the bottom half is moved to coreboot, while the top half stays
in vboot_reference.
TEST=Built with USE=+/-vboot2 for Blaze. Built Samus, Link.
BUG=none
Branch=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I77e3ae1a029e09d3cdefe8fd297a3b432bbb9e9e
Original-Reviewed-on: https://chromium-review.googlesource.com/206065
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
(cherry picked from commit 6b66140ac979a991237bf1fe25e0a55244a406d0)
Change-Id: Ia3b8f27d6b1c2055e898ce716c4a93782792599c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8615
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Julius Werner