The more generic 8250 driver can handle both port-mapped and memory-
mapped 8250-compatible UARTs, with different register sizes. Thus, a
separate driver for MMIO32 is not needed.
The generic 8250 driver was tested to work for both output and input,
on Apollolake SoC, which only presents an MMIO32 UART.
Change-Id: Idab766588ddd097649a37de92394b0078ecc660a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12524
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
during shutdown
DWC2 UDC controller always requires an active packet to be present in
EP0-OUT to ensure proper operation of control plane. Thus, during
shutdown ignore EP0-OUT for queue empty check if only 1 packet is
present.
BUG=b:24676003
BRANCH=None
TEST=Compiles successfully. "fastboot reboot-bootloader" reboots
device without timeout in udc shutdown.
Change-Id: Iafe46c80f58c4cd57f8d58f060d805b603506bbd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4e7c27d849c0411aae58e60a24d8170a27ab8485
Original-Change-Id: Ifa493ce0e41964ee7ca8bb3a1f4bb8726fa11173
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311257
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12413
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Existing Intel xHCI controllers require a delay of 1 ms,
after setting the CMD_RESET bit in command register, before
accessing any HC registers. This allows the HC to complete
the reset operation and be ready for HC register access.
Without this delay, the subsequent HC register access,
may result in a system hang, very rarely.
Verified CherryView / Braswell platforms go through over
1000 warm reboot cycles (which was not possible without
this patch), without any xHCI reset hang in depthcharge.
BRANCH=None
BUG=None
TEST=Verified CherryView / Braswell platforms go through
over 1000 warm reboot cycles, without any xHCI reset hang
in depthcharge.
Change-Id: I8eff5115ca52738bdcf8bc65fbfb2a5f60a0abe1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e7ea70df36e3bf35a6ee1297640900ee76bfdac
Original-Change-Id: Id681a19d0eedb0e2c29e259c5467bcde577e3460
Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310022
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12325
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
enqueue_packet already runs start_ep_transfer, which enqueues the next
job. It's pretty much guaranteed that the port will look busy.
BUG=none
BRANCH=none
TEST=no spurious ep 0-0 busy messages
Change-Id: I9cbfa7b51dd37564262295ddbcdd0755da40c05b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8997dbd78dc363334f4e22eaa61f25de1449ffba
Original-Change-Id: I8a39713fc1d6f16b80284e0f21dc95685716a9b7
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308763
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
hexdump() now takes a pointer instead of an int-containing-an-address.
BUG=none
BRANCH=none
TEST=building with USB_DEBUG works
Change-Id: Idd0c43031a212c8f3b6489f533c488805d98d6a9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8660f6091bb124eeabe73302e8c7f1a8e46324f1
Original-Change-Id: I266efcb8b939d6da104ad05a3e79a78065c60beb
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308762
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12258
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
We found that some SanDisk Cruizer Glide CZ60 sticks (confirmed on 16GB
and 64GB versions) have a problem responding to our first GET_MAX_LUNS
request right after they received their SET_CONFIGURATION. They will
continually return a NAK until the host gives up (which is 2
user-noticable seconds for us). Adding a small delay of about 15us seems
to be enough to fix the issue, but let's do 50 to be save.
Confirmed with both MT8173 and Intel LynxPoint XHCI controllers.
BRANCH=None
BUG=chrome-os-partner:45473
TEST=No notable delay before detecting stick on Oak and Falco.
Change-Id: Ib03944d6484de0ccecbb9922d22666f54c9d53dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 589f19a901275fb8b00de4595763a7d577bed524
Original-Change-Id: I95c79fe40d3ad79f37ce2eb586836e5de55be454
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308980
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change Ie54699162 changed a structure's name and field names and we
didn't notice. Adapt.
BUG=none
BRANCH=none
TEST=building with UDC_DWC2 works
Change-Id: I592ebc29b2a08a23e6dbc9d2186807cbbbbca330
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3dda8ad5ffc36593d8b8fd6664a7f9b4816f0f93
Original-Change-Id: I4a065de0f4045a01bef1dc9fbb2e0578b5508518
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308791
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
get_image_dimension returns the width or height of the image projected on
canvas.
This is necessary for example when two images of different lengths have to
be placed side by side in the center of the canvas and the widths of the
images must be adjusted according to the height.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Samus
Change-Id: I119c83891f48046e888b6b526e63348e74f8b77c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: d1a97f0492eb02f906feb5b879b7b43518dfa4d7
Original-Change-Id: Ie13f7994d639ea1556f73690b6b6b413ae64223c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304113
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11929
Tested-by: build bot (Jenkins)
This change makes the code in graphics.c more descriptive and readable.
Especially, it makes expressions for scale calculation look what they
are meant to do. It also includes:
- Rename variables (struct fraction, dim_org, etc.) for more consistency
- Add more input validation (div-by-zero, etc.)
BUG=chromium:502066
BRANCH=master
TEST=Tested on Samus
CQ-DEPEND=CL:304860
Change-Id: I2694912bb7b6017d5655de2fd655b95432addb22
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 0863dc3ee925d3a05c83c66397b19a57f5478ef3
Original-Change-Id: Id8e349b8e09082fb84c3e1a984617f916e16c518
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304861
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11928
Tested-by: build bot (Jenkins)
This change adds 'pivot' option to draw_bitmap. It controls the point of the
image based on which the image is positioned. For example, if a pivot is set
to the center of the image horizontally and vertically, the image is
positioned using pos_rel as the center of the image.
This feature is necessary, for example, to place a text image in the center
of the screen because each image has a different width depending on the
language.
This change also makes draw_bitmap accept both horizontal and vertical size.
If either of them is zero, the other non-zero value is used to derive the
size to keep the aspect ratio.
Specifying the height is necessary to keep font sizes the same when drawing
text images of different lengths.
draw_bitmap_direct is a variant of draw_bitmap and it draws an image using
a native coordinate and the original size (as opposed to the location and
the size relative to the canvas).
CL:303074 has real use cases.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I5fde69fcb5cc9dc53e827dd9fcf001a0a32748d4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 82a0a8b60808410652552ed3a888937724111584
Original-Change-Id: I0b0d9113ebecf14e8c70de7a3562b215f69f2d4c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302855
Reviewed-on: http://review.coreboot.org/11927
Tested-by: build bot (Jenkins)
This change replaces the current scaling algorithm (nearest neighbor) used
for bitmap rendering with the bilinear interpolation, which has much better
reproduction.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I02520883debb7db40ffc19d4480244e0acabc818
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 764b383c1763a022728f2b2d9fb90e27c9e32e94
Original-Change-Id: I0ddd184343428904d04d8a76fe18a885529c7d3d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302195
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/11926
Tested-by: build bot (Jenkins)
This change adds load_bitmap API, which loads a bitmap file from cbfs
and returns a pointer to the image data.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I7d7874f6f68c414dc877a012ad96c393e42dc35e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 9d33e713a0cf6bd1365418dad989e47e86db01e4
Original-Change-Id: Idbf9682c2fa9df3f0bd296ca47edd02cd09cfd01
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302194
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/11925
Tested-by: build bot (Jenkins)
This change allows draw_bitmap to draw an image outside the canvas
with the original size if the scale parameter is zero. This is used
for example when drawing a splash screen which has to be positioned
at a pixel perfect location.
BUG=none
BRANCH=master
TEST=Draw pictures and boxes on Samus and Ryu
Change-Id: Ia2d8799184d1aa192e2c50850e248bee8f234006
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 45d4717fe5c3e3554bd79b63ade490d88cf00bbe
Original-Change-Id: I48aa21122cfc2ee43bcb1b8f87b00c66abdc230e
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295961
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11923
Tested-by: build bot (Jenkins)
draw_bitmap renders a bitmap image on screen with position and sizes
scaled relative to the screen. images are scaled up or down by nearest
neighbor interpolation.
BUG=chrome-os-partner:43444
BRANCH=tot
TEST=drew bitmap images on Samus
Change-Id: Ib599acc85b25626a6aed1fa9884ecd8e169bb860
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c910c9cdb7efc53aace067bd081aeefc07556811
Original-Reviewed-on: https://chromium-review.googlesource.com/290302
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: Ib599acc85b25626a6aed1fa9884ecd8e169bb860
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295532
Reviewed-on: http://review.coreboot.org/11584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change introduces cbgfx, a graphics library, which provides APIs for
drawing basic shapes, texts, graphic data, etc. on a screen.
BUG=chrome-os-partner:43444
BRANCH=tot
TEST=Drew boxes by draw command of depthcharge cli on Samus
Change-Id: I6019e5998e65dca3ab4785a90669b5db02463d2e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5b3ebce8eae91be742e4f977d3407d24e1537580
Original-Reviewed-on: https://chromium-review.googlesource.com/290301
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Change-Id: I10db27715cb907bdc451a33ed99d257e3af241b7
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291065
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11408
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain Lexar USB disks may fail during the first calls to
get_descriptor(..., DT_CFG, ...) for unknown reasons. Therefore, make
several attempts before giving up.
BUG=chromium:466758
TEST=Manual on Samus. Go to recovery mode, verify that Lexar LJDS70 USB
stick is bootable.
BRANCH=None
Change-Id: I476ac22f9c4f844c60ebc6e53af8c144d70bb9d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93a0570b343479dd22506ad4d7961f0ea4251f8c
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: Ie581c7c71c53816065c7f59202581888a79e445e
Original-Reviewed-on: https://chromium-review.googlesource.com/302403
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12133
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If the device has already been disconnected then we shouldn't enable
host channel to start any transfer, otherwise this channel goes into
an odd state the channel is enabled but can not be disabled by set
hcchar.chdis=1. So we need check the device connect status before
enable channel.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=None
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae3e690b2cd4a9ea8b5766ac873b0e00bf3a23de
Original-Change-Id: Ib3ecf486649ca11b302144f9c00a5e88424e90fa
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298402
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit ea96f947b5304fdde2e0991d23febaeba209dde1)
Original-Reviewed-on: https://chromium-review.googlesource.com/299398
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Idf48ffbc4c2794900e09dec6b2e34e33b21f87b4
Reviewed-on: http://review.coreboot.org/11662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When disconnect is detected in dwc2_split_transfer() the split
configuration registers should be cleared before return.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=On Jerry, usb hot plug works with devices behind hubs
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37594d8b4490b6d393d19d17d8e497db7de8817d
Original-Change-Id: Ie1eecec067305874513c6ceb95df4240dc393cd6
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295625
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d543e14cdc73bd549dd553c8d1d07672a1307981)
Original-Reviewed-on: https://chromium-review.googlesource.com/299700
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4604097743f2f9d763b29ee27f3bc1788a85a62
Reviewed-on: http://review.coreboot.org/11661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Wished I hadn't seen that. Git saw the conflict (file was gone), both
committer and reviewer thought it would be a good idea to re-add it as
dead code (see 558e9b5: libpayload: Add minimal support for PL011 UART).
Change-Id: Ifea8113fbc59e0463eaedb86b976f54ec11113a9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change allows video_printf to left/center/right-align text depending on
the enum value provided by the caller. This is useful especially because usually
the length of formatted string is unknown before calling video_printf.
BUG=none
BRANCH=smaug
TEST=drew fastboot screens on Smaug
CQ-DEPEND=CL:296460
Reviewed-on: https://chromium-review.googlesource.com/292929
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 436f05f60c1b88626740a35913e3ad37b5c777a3)
Change-Id: If1d50b7d8ddaa86eddc1618946756184cb87bfe1
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295413
Reviewed-on: http://review.coreboot.org/11583
Tested-by: build bot (Jenkins)
Seems like our transferred bytes calculation for OUT transfers that span
more than one packet had been wrong, and we just got lucky that we never
noticed it before. The HCTSIZ.xfersize register field we're reading only
counts bytes transferred by the last packet we sent.
OUT endpoints cannot have short transfers -- every transfer should
either finish all bytes we wanted to send or end in a proper error
condition. Therefore, in the absence of an error we can just conclude
that all input bytes have been transferred.
BRANCH=veyron
BUG=chrome-os-partner:35525
TEST=SMSC95xx netboot on Jerry now works.
Change-Id: I57349e697c428df6b56e2f6f62e87652ef1e7a94
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 0abee13b6d89dec12c6fff581ece1836393c7703
Original-Change-Id: Id0a127e6919f5786ba05218277705dda1067b8c3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293956
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Check device connect status while waiting for usb transfer complete
Avoid coreboot get stuck when usb device unplugged
BUG=chrome-os-partner:35525
TEST=None
BRANCH=None
Original-Change-Id: Id103501aa0d8b31b0b81bef773679c0fad79f689
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292630
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292966
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Change-Id: I49396b74131dbfda505d9d3de5adbdc87eb92ce1
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11236
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The xhci_rh_port_status_changed() function tries to always clear all
port status bits, even though most of them don't interest us. This is
generally a smart thing to do since not clearing a status bit may cause
the controller to not generate any more Port Status Change Events.
However, the bitmask we currently use doesn't cover bit 23 (Port Config
Error Change) and instead covers bit 16 (Port Link State Write Strobe)
which is not really related to this and not a W1C bit. Probably a typo,
so let's fix that.
BRANCH=None
BUG=None
TEST=Plugged/unplugged a bunch of USB devices on an XHCI Falco.
Original-Change-Id: Ia83f5b72cce094859c0f0e730752d7b5cfa6e1c6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I11f5fe38cb70055daf6e866a8ee84ca80488e3bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11194
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The 1.1 revision of the XHCI specification added an extra 5 bits to the
Max Scratchpad Bufs field of HCSPARAMS2 that newer controllers make use
of. Not honoring these bits means we're not allocating as many
scratchpad buffers as the controller expects, which means it will
interpret some uninitialized values from the end of the pointer array as
scratchpad buffer pointers, which obviously doesn't end well. Let's fix
that.
BRANCH=none
BUG=chrome-os-partner:42279
TEST=Makes a USB-related memory corruption issue disappear.
Original-Change-Id: I7c907492339262bda31cdd2b5c0b588de7df8544
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291681
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iba1007bfebffe1f564f78bb875fff9ba0fe11a38
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11189
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If short packet detected, stop this transfer and return the actual
transferred size
BUG=chrome-os-partner:42817
TEST=Netboot could run well
BRANCH=None
Original-Change-Id: Icb4317f48aa04ac15bb1886b81d2e3c472d123d0
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/288215
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d372343b4e3d664ce2d76dbf55a5061b5d496bba)
Original-Reviewed-on: https://chromium-review.googlesource.com/291064
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Change-Id: I43d9edffe2074c037f2df203621863e54d2597fa
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11187
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch re-adds a few fixes that originally went into the
chromeos-2013.04 tree. I kinda seem to have slipped them into the
backport of Nico's original XHCI patch (crosreview.com/168097) instead
of making a new change, which was not very clever and caused them to be
forgotten in the later upstreaming wave.
Changing internal XHCI error numbers is just a cosmetic change to make
them uniquely identifyable in debug output. Bumping the timeout to 3
seconds is an actually important fix since we have seen mass storage
devices needing that much in the past.
BRANCH=None
BUG=None
TEST=Diffed payloads/libpayload/drivers/usb between chromeos-2013.04 and
chromeos-2015.07, confirmed that no serious differences remain.
Original-Change-Id: I03d865dbe536072d23374a49a0136e9f28568f8e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I5d773d3a23683fb2164916cc046f4a711b8d259e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11178
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Before the controller's destroy_device() could interrogate
the usbdev_t object usb_detach_device() was freeing and
NULLing out the pointer. That results in all callers who
needed that object to start accessing random bits of memory.
This eventually led into free()ing memory it shouldn't which
corrupted the allocator's state. Eventually, all forward
progress was lost by way of a single ended linked list
turning into a circular list.
The culprit seems to be a bad merge in commit e00ba21.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can boot into OS now w/o "hanging" on glados.
Original-Change-Id: I86dcaa1dbaf112ac6782e90dad40f0932f273a1f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290048
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9135eb0f798bf7dbeccc7a033c3f8471720a0de5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11173
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some FSF addresses found their way back into our tree.
Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds support for the SuperSpeed half of USB 3.0 hubs, which
previously prevented SuperSpeed devices behind those hubs from working.
BRANCH=None
BUG=chrome-os-partner:39877
TEST=Played around with multiple hubs and devices on Oak and Falco, can
no longer find a combination that doesn't work.
Change-Id: I20815be95769e33d399b7ad91c3020687234e059
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3db96ece20d2304e7f6f6aa333cf114037c48a3e
Original-Change-Id: I2dd6c9c3607a24a7d78c308911e3d254d5f8d91d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284577
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: chunfeng yun <chunfeng.yun@mediatek.com>
Reviewed-on: http://review.coreboot.org/10958
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have been trying to avoid reassigning previously used USB addresses
to different devices since CL:197420, because some devices seem to take
issue with that. Unfortunately, that patch doesn't affect XHCI: those
controllers insist on chosing addresses on their own. The only way to
prevent them from reusing a previously assigned address is to not
disable that slot at all.
This patch implements address reuse avoidance on XHCI by not disabling
slots when a device is detatched (which may occur both on physical
detachment or if we simply couldn't find a driver for that device).
Instead, we just release as many resources as we can for detached
devices (by dropping all endpoint contexts) and defer the final cleanup
until the point where the controller actually runs out of resources (a
point that we probably don't often reach in most firmware scenarios).
BRANCH=none
BUG=chrome-os-partner:42181
TEST=Booted an Oak plugged into a Servo without having a driver for the
SMSC network chip, observed that it could still enumerate the next
device afterwards. Kept unplugging/replugging stuff until the cleanup
triggered and made sure the controller still worked after that. Also
played around a bit on a Falco without issues.
Change-Id: Idfbab39abbc5bc5eff822bedf9c8d5bd4cad8cd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 88c6bcbc41156729c3c38937c8a4adebc66f1ccb
Original-Change-Id: I0653a4f6a02c02498210a70ffdda9d986592813b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284175
Original-Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10957
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With split transaction, dwc2 host controller can handle full- and
low-speed devices on hub in high-speed mode. This commit adds support
for split control and interrupt transfers
BUG=None
TEST=Connect usb keyboard through hub, usb keyboard can work
BRANCH=None
Change-Id: If7a00db21c8ad4c635f39581382b877603075d1a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fb514b7f7f7e414fa94bfce05420957b1c57019
Original-Change-Id: I07e64064c6182d33905ae4efb13712645de7cf93
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283282
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10956
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
dwc2 host core do not have a periodic schedule list, so try to send
an interrupt packet in poll_intr_queue() function and use frame
number read from usb core register to calculate time and schedule
transfers.
BUG=None
TEST=Tested on RK3288 with two USB keyboards(connect to SoC without
USB hub), both work correctly.
BRANCH=None
Change-Id: I16f7977c45a84b37c32b7c495ca78ad76be9f0ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d0206b86634bcfdbe03da3e2c8adf186470e157
Original-Change-Id: Ie54699162ef799f4d3d2a0abf850dbeb62417777
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/280750
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add force_shutdown() routine for dwc2 udc driver to support
disconnect and reconnect case when fastboot receiving data.
BUG=chrome-os-partner:41687
BRANCH=None
TEST=None
Change-Id: I9ec204d8b7088cfafd3164c9779a6fd85d379dba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9238f87c065ba8a57bfb4a7e65fd1821ff2922f9
Original-Change-Id: I1e584aaf19efa14409bdfa26039c27fa7034b5f0
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281130
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This will make the code work with the different styles
of Kconfig (emit unset bools vs don't emit unset bools)
Roughly, the patch does this, and a little bit of fixing up:
perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]`
perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]`
Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10711
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The macros of VT100_CURSOR_ON and VT100_CURSOR_OFF are exchanged
Change-Id: Ifdae186ae0503a915d695a9e3fd24bdf65d8428a
Signed-off-by: House Chou <hoare.tw@gmail.com>
Reviewed-on: http://review.coreboot.org/10718
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Found in rockchips rk3288 as used in google/veyron.
BUG=None
TEST=None
BRANCH=None
Change-Id: I2f2c36c5bea3986a8a37f84c75608b838a8782ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59a0bcd97e8d0f5ce5ac1301910e11b01e2d24b1
Original-Change-Id: Ic89ed54c48d6f9ce125a93caf96471abc6e8cd9d
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272108
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10689
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow force shutdown operation of the connection in case where the
cable is disconnected and reconnected back.
BUG=chrome-os-partner:41687
BRANCH=None
TEST=Compiles successfully and fastboot works fine even with
reconnection of cable
Change-Id: I8eb1217b4a9ad6ce8a2a40db329eca1930eda089
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d7ab65c459caa4ec526b99a1aee1a31e9cb80da
Original-Change-Id: I354c44e0ed2211cb2c4c1ae653d201b7d15ea932
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281066
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10686
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They're ASCII only, with only one language at a time,
but they should be good enough to report device names and
serial numbers.
BUG=none
BRANCH=none
TEST=with depthcharge CL, check dmesg on the host device
Change-Id: If888e05b2f372f7f0f43fadb108ca7ef4ed3b7c1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f0bc4242057d3edc4f4796ebeed2d98d89d60a1d
Original-Change-Id: Ibe42f1b49f412e5482cebb7ebe20f6034352fd12
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/278300
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10626
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Daisuke Nojiri