UART1 is selected for debug uart in Kconfig, it also needs to enabled
in devicetree. With this serial output doesn't stop during the device
enable step.
TEST:Build onyx_poc board
Change-Id: I7c910301c6eca5d3057785607139ac03b344bc15
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use same indent levels for switch/case in order to comply with the
linter.
Change-Id: I2dd0c2ccc4f4ae7af7dd815723adf757244d2005
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Eric Lai <ericllai@google.com>
Use same indent levels for switch/case in order to comply with the
linter.
Change-Id: I602cf024ec84b15b783d36014c725826f9d6595e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79418
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use same indent levels for switch/case in order to comply with the
linter.
Change-Id: Icf41e823c42ffea7b73bdd9112081af4d1f94bc9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Eric Lai <ericllai@google.com>
These IDs are not used as crashlog data is not stored in CBMEM now.
(Ref CL: I43bb61485b77d786647900ca284b7f492f412aee
Title: soc/intel/common,mtl: Refactor BERT generation flow for crashlog)
BUG=b:298234592
TEST=Able to build REX.
Change-Id: Ie38571dece89a995d582099d34f0a1dd57cb936f
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With earlier flow, a chunk of CBMEM region was allocated for each SRAM
e.g., PUNIT SRAM, SOC PMC SRAM and IOE PMC SRAM. Then entire SRAM
content was copied to dedicated CBMEM region. Later in acpi_bert.c, the
BERT table was getting created for each chunk of CBMEM. This flow was
not considering creating separate entries for each region of crashlog
records. It resulted in only the first entry getting decoded from each
SRAM.
New flow aims to fix this issue. With new flow, a simple singly linked
list is created to store each region of crashlog records from all
SRAMs. The crashlog data is not copied to CBMEM. The nodes are
allocated dynamically and then copied to ACPI BERT table and then
freed. This flow also makes the overall crashlog code much simpler.
BUG=b:298234592
TEST=With this change decoding crashlog show comprehensive details,
tested on REX.
Change-Id: I43bb61485b77d786647900ca284b7f492f412aee
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78257
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The optimization of sleep time in acpi code includes reducing the sleep
duration and increasing the polling frequency within the acpi _ON/_OFF
method. StorageD3Enable is activated in Google/Rex, and this
optimization results in a saving of approximately 25ms in D3cold resume
time, reducing it from around 160ms to 135ms.
BUG=b:296206467
BRANCH=firmware-rex-15709.B
TEST=boot test verified on google/rex
verified _ON/_OFF Method in SSDT.
verifid kernel log in s0ix test -
0000:00:06.0: PM: pci_pm_resume_noirq
Change-Id: I7ba960cb78b42ff0108a48f00206b6df0c78ce7a
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Enable Acoustic noise mitigation for google/screebo and set slew rate
to 1/8 for IA domain and ignore the slew rate for SA domain.
BUG=b:312405633,
TEST=Able to build and boot google/screebo.
Before:
[SPEW ] AcousticNoiseMitigation : 0x0
[SPEW ] FastPkgCRampDisable for Index = 0 : 0x0
[SPEW ] SlowSlewRate for Index = 0 : 0x0
After:
[SPEW ] AcousticNoiseMitigation : 0x1
[SPEW ] FastPkgCRampDisable for Index = 0 : 0x1
[SPEW ] SlowSlewRate for Index = 0 : 0x2
Change-Id: Ib86939ab48c2c6e7d0491d7c1cb4a2c7c6a1b568
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79323
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Acoustic noise in PCBs is a common problem and be caused by a variety
of factors, including:
Mechanical vibrations, Electromagnetic interference (EMI) and/or Thermal
expansion.
This patch adds the UPDs to FSPM header file for mitigating the acoustic
noise.
FSPM:
1. AcousticNoiseMitigation
2. FastPkgCRampDisable
3. SlowSlewRate
BUG=b:312405633
TEST=Able to build and boot google/rex.
Change-Id: Iea0bfa2f92bb82e722ffc1a0b2f1e374b32e4ebc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79301
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As we look at unifying the format of coreboot code (/src, excluding
src/vendorcode), we need a code-beautifier configuration that works
well with the coreboot style. This patch is an attempt to match the
existing code styles as much as possible.
There are going to be some trade-offs in any code formatter. Tables
which have been hand-formatted probably won't look as good. These
can be specifically marked to be excluded from the formatter, however
this should be the exception, not the rule.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I70341d77e167c145f447594b6b0bef628cea83c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78832
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCH identification functions and `pch_iobp_update` are used in multiple
stages. Move them out of `pch.c` to drop some ugly preprocessor usage.
Subsequent commits will use `pch_iobp_update` in romstage as well.
Change-Id: I8d33338a4f74fd03c8f99f8fcece99b63c28adab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79624
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
when S0ix returns S0, PERST needs to delay until
Main 3V3 is stable and then pull up
BUG=b:313976507
TEST=emerge-rex coreboot,measurement waveform verify pass
Change-Id: I33a86e52fab3c5c8cba6ebed0cbdd1b88b6538b0
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79320
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For EVT SCH:
1. Use GPP_D15 to control AVDD and AFVDD simultaneously for MIPI Camera.
2. Delay reset for 5ms when device power on.
BUG=b:312663347
TEST=1. Google Camera app working
2. Passed EA verified
Change-Id: I880fb309fcef006090e2849fa6c3a0d472851851
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This option is nowhere selected and there is only a single case left
where it's used. Guarding the check in pci_rom_load() seems like a
bad idea: As the code would be copying all VGA ROMs to the same
location, it would be only working by chance (if the last encoun-
tered ROM is the right one). Hence, drop the guard and always check
for the correct device.
Change-Id: Ib283bf0a65367b99099a3bfcbd27585d44235eb9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79596
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's neither need to remove get_hw_mem_hole_info from the code if the
Kconfig option was set to 0 nor the actual value didn't make any
difference in the behavior of the code: When node_id has still its
initial value of -1, domain_read_resources won't use the value of
hole_startk, and when node_id is set to 0, get_hw_mem_hole_info also
sets hole_startk to the actual value that then gets used by
domain_read_resources.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieffab695a3151ed7f6bf9d6c880bbb43eecf7893
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79609
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node, so the nodeid parameter of
get_node_pci is always 0. Since this SoC has a chipset devicetree, we
can just use DEV_PTR(ht_X) instead of the pcidev_on_root call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1bf9d214b4c2e5d995976fb79fef6fe43a6e9fa0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79608
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node and since we're in ramstage when
domain_read_resources gets called, there's DRAM on this node, so no need
to check for this. To be extra sure, also initialize basek and limitk
before calling get_dram_base_limit with pointers to those as arguments.
This won't be necessary for the code to work as intended, but will
probably keep the compiler from complaining. Also move the declaration
of basek, limitk and sizek to the beginning of the function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4ef8011eb57b16218b8f5fea295900b855c3014b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79611
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Start with the resource index 0 and increment it after reporting each
resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6fb59ff3d371b744b53093d17392d1c3510bef82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This APU is always a single-node and also only has one DRAM controller,
so there is only one valid DRAM base and limit register. It's also worth
mentioning that the assumption made in get_dram_base_limit that the n-th
node is using the n-tn DRAM range register was valid for K8, but not
necessarily on newer generations than that.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0529c66e8d0e6c8eb42eec2c6d9d2e892287865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79607
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This APU is always a single-node and also only has one DRAM controller,
so we don't need to loop over the different nodes to find the memory
hole below 4GB. We also don't need to check for the special case where
the memory hole is non-DRAM address space between the parts of the
address space decoded by different DRAM controllers.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9793d911d2d496be49168c06d83ceb802bc2b647
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This APU is always a single-node, so domain_read_resources only needs to
handle exactly one node and doesn't need to loop over the nodes.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4218077cb4e11b762ce0e8694a97bdec33eaa056
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This SoC only supports a single-node configuration, so all the code
related to multi-node support can be removed. In this commit only the
get_fx_devs function and related code are removed for better
reviewability. In f1_write_config32 it's no longer needed to loop over
the different devices of the different nodes, so only a single PCI
config space write remains.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dc7324d3fcd0d07ac7a3a246a740fd9e91c3840
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79604
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node system and bits 4..6 of the node ID
register D18F0x60 are also marked as reserved in BKDG #52740 Rev 3.05.
On an APU2 board with quad-core APU, this register reads back 0x00030000
which results in a value of 1 to be returned from get_node_nums, so this
patch doesn't change behavior, but stops using reserved bits.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I65ed1124c0ca8e7eba54ff53dc626d35cd5e2e58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79603
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This system only has one northbridge and amd_initcpuio has already set
up the routing of the legacy VGA IO and MMIO ranges to it. Since only
the pci_dev_set_resources call remains in nb_set_resources, use
pci_dev_set_resources directly as set_resources function.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib3835db9fd83221ac2b8e34d998f938812d24413
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since the IOMMU is always function 2 of device 0 on bus 0, the device
operations can be statically assigned in the devicetree and there's no
need to bind the IOMMU device operations to the PCI device during
runtime via a list of PCI IDs.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I84e949500ee86e0fcb2d15791502f5e3e7127703
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79105
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Since the northbridge is always function 0 of device 0 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the northbridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7faaa468ff77e05c378c5555622c3584cfe3f81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With 1ms delay, reset is de-asserted too soon, before power is fully
up, causing a glitch to the reset signal. The issue is resolved with
4ms delay.
TEST=tested on google/jinlon device and observed the issue is resolved.
BUG=b:260253945
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I4efe916824cc193a7c2db7599b37f0d4de40bfce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79474
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shelley Chen <shchen@google.com>
This patch provides a way to mask the 3-strike error on Intel
Meteor Lake SoC platform across pre-prod and prod SoC.
This patch decouples MSR selection for 3-strike error disablement, ensuring compatibility across SoC types.
Without the correct MSR been programmed the SoC platform is unable to disable 3-strike error.
BUG=b:314883362
TEST=Disable the 3-strike on google/screebo with QS silicon.
Change-Id: I5363102deea67c44c9433a3f66c92badb0d0f182
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79473
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When caching the ramstage for suspend/resume, we copy the entire image
as it resides in RAM. The last part of that, CONFIG_HEAP_SIZE bytes, is
the heap that will be reinitialized when the ramstage is started again.
As such, copying doesn't make sense and complicates HEAP_SIZE
configuration (because it needs to fit the space-constrained cache
location) and costs time and space. Therefore, skip the heap.
Side notes:
- When building with ASAN, program.ld indicates that it will allocate
some more space after the heap. This is not a problem, we just copy
an ASAN-sized copy of the heap.
- Heap use is managed in src/lib/malloc with statically allocated
variables. Because ramstage is cached before it's executed, these
values will be reset to their compile-time default values, too.
Change-Id: I6553dc8b758196f2476af2e692c0421d0fa2b98e
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79525
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The end-of-build targets weren't very granular previously, so warnings
could be lost instead of being printed at the end of the build.
This separates the end-of-build targets into 4 different groups, in this
order:
- build_complete: The coreboot build itself is done
- files_added: All files have been added to CBFS
- show_coreboot: Display any normal coreboot build messages
- show_notices: Display any warnings or notes
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia67446f164b8e66415a1a8c196999316fdf39f1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79382
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
1. Anraggar doesn't support SDCard, so disable SDCard contorller.
2. Not disabling it will cause can't enter S0ix on first suspend.
BUG=b:313585586
TEST=1. check lspci
2. can enter S0ix on first suspend
Change-Id: Ie4747d9c5d6ae93d29ef78b629855e0dd320c4db
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This file is identical to the copy currently found in the blobs
repository; it is simply being relocated for consistency and since it
does not need to be in an external repo.
BUG=none
TEST=build/boot skyrim
Change-Id: I352f58e0d3965356f3282a2653c6c11b44853857
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This file is identical to the copy currently found in the blobs
repository; it is simply being relocated for consistency and since it
does not need to be in an external repo.
BUG=none
TEST=build/boot guybrush
Change-Id: Ice4cbaccca13e9c4ae246fdcde5c89aa2086f1e1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This file is identical to the copy currently found in the amd_blobs
repository; it is simply being relocated since it is mainboard specific
and does not need to be in an external repo.
BUG=none
TEST=build/boot morphius
Change-Id: Ia78fcd065fbf4d5ba6ec4edc3f8f937badf66ecc
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79591
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
.apcb files are binary configuration data for AMD firmware binaries
created by another tool/script, nothing in them is copyrightable.
Change-Id: I254c12e65b118ef074deea983a853850a8cad77c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
.apcb files are binary configuration data and not human readable;
exclude them from license, newline, and whitespace checks.
Change-Id: Idc1ddd5067cb97ef8b5758a0b8bf040d1e421871
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
For initial debugging, we want to disable SW syncing. Will re-enable
in the future.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
run gbb_utility --get --flags <image>
make sure that it returns 0xa39
Change-Id: I865e9585ab37d1328a0ff54c6343cdad2c02220c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79569
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
In commit 0a0945c6a2 (sio/nuvoton/npcd378: Use acpi_device_path_join),
some oversights were made. Instances of "strconcat(scope, ..." should be
replaced with "..._join(dev->bus->dev, ..." instead of "..._join(dev, ...".
On HP 8200 USDT, this fixes ACPI error like this on resume from S3:
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.SIO0.L040.RMFG], AE_NOT_FOUND (20230628/psargs-330)
ACPI Error: Aborting method \_GPE._L08 due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L08] (20230628/evgpe-511)
RMFG seems to be a typo of PMFG made in that same commit.
Change-Id: Ifffa7ad72cfdb644c8b5147132a5fd56511ed33b
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Even though this mainboard is called 'Onyx', the openSIL implementation
and the corresponding coreboot integration is only a proof of concept
that isn't fully featured, has known limitations and bugs, and is not
meant for or ready to being productized. Adding the proof of concept
suffix to the name should point this out clearly enough so that no
potential customer could infer that this might be a fully functional
and supported implementation which it is not.
Change-Id: I157a8fffdc2a8543465fe8d444ac87f3f417389f
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77896
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The openSIL code for the Genoa SoC is only a proof of concept, so change
the name of the Kconfig option to include this code in the build from
SOC_AMD_OPENSIL_GENOA to SOC_AMD_OPENSIL_GENOA_POC to clarify that this
is code that isn't intended or ready to be productized.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If91cdaa7c324426964bba2de2109b6c38482fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79574
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default EPP is set at 50%, which is deemed insufficiently
aggressive for meeting the MTL performance expectations in
balance_performance mode.
# cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference
balance_performance
# iotools rdmsr 0 0x774
0x0000000080003f06
EPP=45% is giving the required performance in MTL.
# iotools rdmsr 0 0x774
0x0000000073003d06
NOTE: Kernel changes are necessary to ensure that the EPP (Energy Performance Preference) configured in the BIOS is not overwritten: https://patchwork.kernel.org/patch/13461932
BUG=b:314275133
TEST=Build and boot.
Change-Id: I1953994cdb4e9363fdd4b4728e3e5236276c06c8
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79386
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Non-touchscreen sku will set related GPIOs to NC. If touchscreen enabled
in overridetree for non-touchscreen sku, the boot time will be 6-7s. Set
touchscreen probed to TOUCHSCREEN_UNKNOWN for reduce boot time from 6-7s
to under 1s.
BUG=b:316434359
BRANCH=firmware-nissa-15217.B
TEST=Boot time (cbmem -t) from 6,460,972 to 922,844
Change-Id: I016ce762f726b7624bd060284f74f0992cb129b6
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Make sure that the APMC SMI command IO port is configured to what
coreboot expects and enable the SMI generation for the APMC SMI command
port.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4fc259dea125a16556a01b80a3d5e6fb476044a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79531
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Varshit Pandya