Based on info from wiki.
Change-Id: Iebd799abe48550c4df55632b8177d845df7d9a7d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4706
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
board_info.txt is a file to be used by board-status to add
some useful info to the generated table like flash chip type.
This series is autogenerated from wiki page Supported_Motherboards.
Change-Id: Ie2bda900713ef4883134477163320936c84c34f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4701
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Original actually meant j7f[24] which without square brackets
became confusing. There is no such board as j7f24.
This is a prerequisite to adding j7f4* as cloned boards
Change-Id: Ia7708b13ac4141ef788183c7817fce1366919936
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4728
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
One of arguments to cbfs_get_file_content was missing.
Change-Id: Icb4ef26f18d63c133bc32f1c62a524edee0621ea
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4696
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Delay the copying of MRC cache data from CAR to CBMEM until after
sdram_initialize() returns and cbmem_initialize() completes.
Calling cbmem_initialize() twice would complicate the decision logic
of when CBMEM area needs to be wiped clean.
Change-Id: Ic59e94cb2436293efc47b52f7418f5dbf76c714a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4666
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be
set with values that are not power of 2. The region programmed
as WB cacheable will include all of ROM_SIZE.
Side-effects to consider:
Memory region below flash may be tagged WRPROT cacheable. As an
example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB.
Since this can overlap CAR, we add an explicit test and fail
on compile should this happen. To work around this problem, one
needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and
define a smaller region for WB cache.
With this change flash regions outside CBFS are also tagged WRPROT
cacheable. This covers IFD and ME and sections ChromeOS may use.
Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4625
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
This completes the romstage for the cubieboard.
Change-Id: If3272d8a9e414f782892bc41b34b5e2dece5d7e1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4686
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To be consistent with touchpad counterpart.
Change-Id: I72d09b41b964f80a81fbf409ef69dd368834a3e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
To stay in line with wwan and bluetooth.
Change-Id: Iafe2dc97fc2aec5c2ad1834659b796a6b079c1bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Ability to choose compatibility mode is interesting for testing payloads and
OS for compatibility with older systems.
As per comments
"ide_legacy_combined # TODO: Does nothing since
generations, remove from sb code?"
The "combined" mode was removed. It wasn't used by any mobo and the code for
it is almost identical to IDE one other than few bits relating to interrupt
handling and ISA mode.
Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Useful for accessibility.
Sticky modifier (sticky Fn) is a behaviour of modifier key when
you don't have to hold it pressed to achieve the result. E.g.
with normal Fn brightness up is:
<Press Fn> <Press Home> <Despress Home> <Depress Fn>
With sticky Fn you can do:
<Press Fn> <Depress Fn> <Press Home> <Despress Home>
Change-Id: I4da5adcea02428d936023891de08684cae77c44e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested on my X201 and X230.
Change-Id: I3c7ec65681157d15c6e87eea64779a08e03ae5a8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Number one reason to use cbfs_get_file was to get file length.
With previous patch no more need for this.
Change-Id: I330dda914d800c991757c5967b11963276ba9e00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4674
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
wwan_enable was never used.
wlan_enable isn't something for device tree but for CMOS config if at all.
Change-Id: I765d9d6f0b73b7dc5a57c0c630a53b4b7a0b48cb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4651
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
THis reduces risks of bufer overflows.
Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The other port is not easily accessible.
Change-Id: I6ea31346a375debcd5fc1c27e4078e3a436715e3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4635
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
DRAM reset gate GPIO is different on different mobos move it to hidden config
with 60 (current value) as default.
Set it to 10 for Lenovo X201.
Change-Id: I4f3b6876d7c33d4966315091b63a76a9a0064c16
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4622
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Even though the Allwinner A10 is limited to a 24KiB bootblock, the
memory initialization takes only about 3KiB and leaves enough room for
an MMC or NAND driver, so init the memory early on. The advantage is
that we can eliminate complicated logistics of where to cache CBFS and
where to load the ramstage in SRAM.
Change-Id: Id549552ed509434e831db60deaef28e04d62417f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4630
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The CPU was clocked at 384MHz in the bootblock, but the AHB bus has a
maximum rated frequency of 250MHz. Its clock needs to be divided to
keep it within spec. Overclocking the AHB bus hung the CPU when
memory was accessed.
Change-Id: I7cb9cdd1f126b3d5b0446fc68af79b54946bc2d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4629
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Rather than having to track which bit in which register should be
cleared or set to gate or ungate the clock to a certain peripheral,
provide a simplified enum which encodes the register and bit. This
change comes with a function which decodes the enum and gates/ungates
the clock.
This also removes the register-dependent bitmasks for APB0 and APB1
gating registers.
Change-Id: Ib3ca16e54eb37eadc3ceb88f4ccc497829ac34bc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4571
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Include a function to multiplex more than one pin at a time. This
is useful for peripherals that have the same function number for
all their pins.
Since we now have two functions for muxing pins, also document
them.
Change-Id: I53997cc3a2586e3cf749cd672f69fb427659c67f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4565
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a minimal infrastructure which initializes the system clocks
and serial console.
Change-Id: I768ede6ccf8674ffe9fecd8925cec89768209cab
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Due to recent restructuring X201 native video init has disappeared from
config options. Put it back and fix compilation with it.
Change-Id: I6d9ba5da196c093abd2df89a6fe5efefece1fb3c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4606
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Gizmo is a AMD-Family14 based board. More information can
be found at www.gizmosphere.org
Change-Id: I5cfd161b4f408be1f65cf332b083ed7c79a99cfd
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/4536
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Place this in header so it works also when raminit_f.c and
raminit_f_dqs.c are not #included in romstage.c build.
The workaround remains to be disabled for all boards.
Change-Id: Iff0271ceb21ee1e28a1a31d6bbdb97e29d76461e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4568
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Do it just to remove MEM_TRAIN_SEQ test under mainboard/ to see all
K8 rev F boards do the same things here.
Change-Id: If75035a4ef8882c2618d434d83ba59c408593d86
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4567
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO,
so have the option enabled together with K8_REV_F_SUPPORT.
Also move the option under AMD K8.
Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4582
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this
is not a true option but copy-paste remainder from AMD K8.
Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
K8_REV_F_SUPPORT is already set by all affected sockets, (AM2, F, S1G1).
Change-Id: If42a4178263d90a4e195fae0c78943ac9eda1ad6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4557
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The comment was copied around so fix all occurrences using the following
command.
$ git grep -l accessm | xargs sed -i 's/accessm/access/g'
Change-Id: I46e117c126c0f851cd5e95cf9e42a77ca5f80996
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4577
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This config was for AMD K8 only.
Change-Id: Ic1ce60041fef6ddee2dae0e3559fb78f088740af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4556
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This config was for AMD K8 only.
Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4555
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
