PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE.
Change-Id: Ibd1e669fcbfe8dc6e6e5556aa5b1373ed19c3685
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33129
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We keep a mirror in case any of the originals disappear, but we also
have to remember to update it.
Change-Id: Ib4be91d1d508d3d5dba7ace1d167d8e528d58b3d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There were two hooks in the boot state machine which dumped the ME
status to the debug UART, which is unnecessary. Removed the hook
for the BS_OS_RESUME_CHECK state, leaving just BS_PAYLOAD_LOAD, which
is called before FspNotifyEndOfFirmware, as required.
BUG=b:138463532
BRANCH=none
TEST=Boot up, check cbmem to ensure the ME status messages are
only printed one time.
Change-Id: I86bc6e33de4096f33023730ffabb25715c985de0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Id3382d19088cba2703350339b0bd0cfb3c0e63b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change adds a user selectable option to enable all WiFi SAR
configs that apply to hatch.
BUG=b:138177048
Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The amdht code currently relies on an idiosyncratic ASSERT() macro,
which actually doesn't do anything right now, and even it did would only
print a janky error message. Replace this with the normal ASSERT() macro
from <assert.h>. The default behaviour now is to print an error message
but do nothing else, and failed assertions will only halt if you enable
FATAL_ASSERT, in which case, well, you asked for it.
Change-Id: I6db7565171a345f9afbc9fb37cff8fda58f942df
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402076
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There will be a possible out of bounds array access if
power_limit_1_time == ARRAY_SIZE(power_limit_time_sec_to_msr), so
prevent that in the index check. This issue was fixed for other cpus in
commit 5cfef13f8d (cpu/intel: Fix out-of-bounds read due to off-by-one
in condition). Based on the discussion for that commit, also remove the
magic constant 28 in favour of the index of the last array element.
Change-Id: Ic3f8735b23a368f8a9395757bd52c2c40088afa1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The bdk_phys_to_ptr() function converts a uint64_t address to a void *
pointer. Judging by the comments, the old implementation had a check
that would refuse to convert a null pointer, which required several
workarounds when trying to convert the address 0 to a pointer. This
isn't the case for coreboot though, which implements this function
as a simple (void *) cast, so we can remove the old workarounds.
Change-Id: I6537d1699e6726c1fb155d69a51e14da856232de
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393962
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Ensure that best_en_idx is within bounds before accessing the _en array.
Change-Id: Ifa6259e28875a8cf8199896bda7982370ccaa277
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34593
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The total number of errors is only needed after a final tuning run at the
end of this function, so we can remove this unneeded store for earlier
runs.
Change-Id: I62adb38ccba98d90bcf8ccd13998762b9b694111
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393967
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The virt machine is special as it doesn't emulate flash and it puts
the coreboot.rom at start of DRAM. The payload loader doesn't know
about CBFS in DRAM and overwrites the CBFS while decompressing
payloads, resulting in undefined behaviour.
Mark the region as SRAM to make sure the payload won't
overwrite the CBFS while decompressing.
As payload is always decompressed to DRAM, it wouldn't touch
SRAM memory regions.
Change-Id: I36a18cb727f660ac9e77df413026627ea160c1e1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix regression introduced in bd4bcab
"lib: Rewrite qemu-armv7 ramdetect".
The detected DRAM size is in MiB, thus needs to adjusted accordingly
before passed to ram_resource.
Wasn't seen earlier as everything works, except payload loading.
Change-Id: I4931372f530e7b4e453a01e5595d15d95a544803
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
It would be useful if we have at least one "new" board on which we
actually built vboot, in order to notice if something breaks.
Change-Id: I16c7867e3f0f4e1f2e6ae3918c30789e39881b85
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This reverts commit 598af2e2c2.
Reason for revert: This commit breaks every board with VBOOT enabled
if the platform is apollolake, broadwell, skylake, baswell, baytrails
or icelake. The reason is, that the SoC selects
VBOOT_MUST_REQUEST_DISPLAY by default, and this has a dependency now
on VBOOT_MAY_SKIP_DISPLAY_INIT. This will only be auto-selected if
it is a CHROMEOS platform.
Change-Id: I3872d9aa993326ded135d8a5d950d5b1b1eddf34
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34308
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 46445155ea.
Reason for revert: Breaks coreboot. Either no UART working or the
complete boot process stops.
Platform: Intel Apollolake, tested on Up Squared
Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Print an error message and return if an invalid QUP or BLSP is
encountered. This prevents a possible null pointer dereference
of spi_clk.
Change-Id: I374e15ce899c651df9c2d3e0f1ec646e33d4bdb2
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1401086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Consider the following assignment:
u64 = s32
For positive values this is fine, but if the s32 is negative, it will be
sign-extended in the conversion to a very large unsigned integer. This
manifests itself in two ways in the following code:
First, gpu_pipe{a,b}_port_select are defined as int, and can have the
values 1 or 2. In the case when they have the value 2, the shift 2 << 30
will be a negative number, making it susceptible to the sign-extension
problem above. Change these variables to something more reasonable like
a uint8_t, which is unsigned.
Second, in any bit shift, any variable with width less than an int will
be implicitly promoted to an int before performing the bit shift.
For example, the variable gpu_pipea_power_on_delay is a uint16_t, and if its
highest bit is set, the shift gpu_pipea_power_on_delay << 16 will become
negative, again introducing the above problem. To prevent this, cast all
smaller variables to a u32 before the shift, which will prevent the
implicit promotions and sign extensions.
Change-Id: Ic5db6001504cefb501dee199590a0e961a15771b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229699, 1229700, 1229701, 1229702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34487
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:112267918
TEST=Ran make help and verified build directory is no longer created
Change-Id: I4bb066b5c3b3d9a7bb19291ef928042b90f10440
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The build directory might not exist in the src dir.
BUG=b:112267918
TEST=make what-jenkins-does
Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The logic for the calculation of plld.m is rather complicated, so do a
sanity check that it is non-zero before doing the division.
Change-Id: I60f49b8eed47a3de86713304bde7a4d3f3d935dd
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1260981
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
volt_str is used to print information about the RAM configuration
in report_common_dimm(), so let's print out "unknown voltage" if the
voltage isn't recognized rather than a garbage value.
Change-Id: I8e85917fd682e166172fbf10597bde4a8a11dfc7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393958, 1393982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change the fletcher32 checksum calculation to match PSP and AGESA
implementations.
The symptom of the failure has only been noted in Picasso's BIOS
Directory Table, when a BIOS binary image of different sizes were
passed to amdfwtool. The PSP halts the boot process with the bad
BDT checksum, and if allowed to continue, AGESA asserts later due
to a failed BDT verification.
This version has been verified to produce the same result as found
at https://en.wikipedia.org/wiki/Fletcher%27s_checksum.
TEST=Build apu2, bettong, grunt and verify before/after amdfw.rom
is unchanged.
Change-Id: I2ba2c49a70aa81c15acaab0be6b4c95e7891234f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
* Move armv7 RAM dection to a common place
* Enable it for all emulated platforms
* Use 32bit probe values and restore memory even on failure
* Use the new logic on the following boards:
** qemu-armv7
** qemu-riscv
Tested on qemu-system-riscv:
Fixes kernel panic due to wrong memory limits reported.
Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We recently added the --asserts option to set asserts as fatal in abuild
but didn't add the flag to getopts, so it gets rejected as an invalid
argument.
Change-Id: Ic70e9a2bec039955cf62c175875598773ade2d3d
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add VBT 8.0.1038 binary.
Panel #10 is modified to support the 1200x1920 LCD panel.
This panel is configured as default.
LCD and HDMI are working fine.
BUG=N/A
TEST=booting Facebook FBG1701
Change-Id: If327e4e071df61b02fcec45213c2b700320ef269
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use latest OpenSBI that include support for dynamic firmware loader.
That allows us to use OpenSBI similar to BL31 on aarch64:
* coreboot loads the payload
* coreboot loads OpenSBI ELF right before payload handoff
* OpenSBI does platform lockdown and provides runtime services
* OpenSBI hands control to already loaded payload
The uncompressed compiled OpenSBI code is about 41KiB.
Required to boot GNU/Linux on qemu-riscv as some instructions needs to be
emulated by SBI.
Change-Id: If7ed706bc54a75fb583a8aa46fdd61ae7d18c546
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Set FD bit if xHCI is disabled in devicetree.
Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add f81803A plus the capability to control the fan with any fintek SIO.
This will be done through a common API, though currently only F81803A will
have it implemented.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I3d336e76bccc38452b1b1aefef5d4a4f7ee129a8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Also don't define the default as this result in spurious lines in the
.config.
This also cleans up an unused Kconfig file.
In the generated config.h CPU_QEMU_POWER8 is gone as expected and
ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same.
Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Load SSPM firmware and boot up SSPM.
BUG=b:80501386
BRANCH=none
Test=We can see "SSPM is alive" in ATF stage if SSPM enabled and ipi success
Change-Id: I9285034fc8ce38b40134f5eb7b986a663175e620
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31835
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are treating reg_val like a bit mask, so use bitwise or instead of
boolean or, and use |= to enable certain bits instead of overwriting the
whole variable.
Change-Id: Ia8c0ea5a58e25b3b58ed82caba20f8e49a30fb68
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1287070
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Based on updated schematics, change polarity of USI_INT, and add
the reset and enable GPIOs to the touchscreen ACPI node. The stop
GPIO can't be used with the current implementation of _ON, as the
way it's wired will cause power sequencing to fail.
BUG=b:137133194, b:138240502
BRANCH=none
TEST=Compiles, don't have next board rev to test with
Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I5aa3bb2c72dcf127d418c989f6b63c9b1f412f08
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
JENKINS_ABUILD_OPT is passed in abuild's command line
Change-Id: I5e7fbb77a3c6592a4414a6c1e3f7556c7e3a824c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
This enables fatal asserts, which can be useful to get better
diagnostics by the build tools (both compilers and static analysis.)
Change-Id: I1e1653f465fe1f545878d6eec83b8645dc17d9cb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Sumeet Pawnikar