This patch adds the following support to coreboot
1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B
partition of BIOS
2. Helper functions to support update.
Pre-requisites to enable IOM/NPHY FW Update:
1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and
FW_MAIN_B through board configuration files.
CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path
SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path
2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition
NPHY/IOM update.
coreboot follows below procedure to update NPHY and IOM:
NPHY Update:
1. coreboot will navigate through the CSE region,
identify the CSE’s NPHY FW version and BIOS NPHY version.
2. Compare both versions, if there is a difference, CSE will trigger an
NPHY FW update. Otherwise, skips the NPHY FW update.
IOM Update:
1. coreboot will navigate through the CSE region, identify CSE's IOM
FW version and BIOS IOM version.
2. Compares both versions, if there is a difference, coreboot will
trigger an IOM FW update.Otherwise, skip IOM FW update.
Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT
PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE
boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only
if CSE boots from CSE RO Boot partition.
Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then
triggers update of NPHY and IOM FW in the CSE Region(RO and RW).
coreboot triggers NPHY/IOM update procedure in all ChromeOS boot
modes(Normal and Recovery).
BUG=b:202143532
BRANCH=None
TEST=Build and verify CSE sub-partitions IOM and NPHY are getting
updated with CBFS IOM and NPHY blobs.
Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after
the update.
Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a check to determine if the CSE's current operation mode
is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE
command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG,
coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW
partition.
TEST=Verify sending HMRFPO_ENABLE command on Brya system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch renames the compare_cse_version() function to the
cse_compare_sub_part_version(). It makes the function generic so that
it can be used to compare version of any CSE sub-partition like IOM,
NPHY etc.
TEST=Verified build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to
specify the correct amount of PCIe I/O.
Document number 645550 indicates that Alder Lake-N has 12 PCH root ports
and no CPU root ports.
Document number 645548 indicates ADL-N has 5 clock sources and 5 clock
request signals.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT
is enabled from the lookup step into the code where a file is actually
loaded or mapped from flash. This has the advantage that CBFS routines
which just look up a file to inspect its metadata (e.g. cbfs_get_size())
do not cause the file to be measured twice. It also removes the existing
inefficiency that files are loaded twice when measurement is enabled
(once to measure and then again when they are used). When CBFS
verification is enabled and uses the same hash algorithm as the TPM, we
are even able to only hash the file a single time and use the result for
both purposes.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
coreboot stores much information in the CBMEM IMD. Until now it was
ignored. This patch makes use of these coreboot tables entries.
It also removes get_cbmem_addr() function as it is no longer needed.
Moreover, the coreboot tables entry CB_TAG_MRC_CACHE does not exist
anymore, as it is not created by the code. It was replaced by
CBMEM_ID_MRCDATA entry, so MRCDATA should now be accessible through
sysinfo structure field.
Change-Id: I5bd02a98ba2631f34014bc0f8e7ebd5a5ddd2321
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The 'at' part of the name refers to starting to read from a specific
offset, so it doesn't make sense for the 'full' version of the function.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The build fails because smm_stub_size() tries to find a symbol that
won't be present.
Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The Hermes mainboard is used in different system configurations. The
current VBT for Poseidon systems is unsuitable for Avalanche systems
because display ports are connected differently.
Add a new field in the BMC config EEPROM layout and use it to choose
the correct VBT for every system configuration.
Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The original RCOMP resistor and target values only apply to ULT CPUs and
do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings
and the associated comments.
Tested, still boots.
Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Define a new field in the board config EEPROM layout for port B Vref.
Write port B Vref settings to unused non-volatile NID 0x12 instead of
NID 0x18, the actual port B NID. Because per-port Vref settings don't
persist after codec resets, a custom Realtek driver (ab)uses NID 0x12
to restore port B Vref after resetting the codec.
Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use lowercase for hex numbers, sort includes alphabetically and avoid
relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead
of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one
definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up
the indentation of some includes.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There's no need to use a variant structure here. Only one variant is
used, and revision-specific differences are handled at run-time, and
it's unlikely that another variant will ever exist.
Reorganize the mainboard code to get rid of the variant structure.
Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID
straps and Developer Mode Beep signals. During boot up it is LOW and
selects RAM_ID straps. When the system enters OS, it is driven HIGH and
selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5
domain it does not reset until the system enters mechanical off (G3)
state. On scenarios where the power button is pressed when the system is
in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still
selecting DEV BEEP signal. This causes boot up failures. Fix this by
configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage.
BUG=b:204450368
TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle
followed by a S5 -> S0 boot cycle for 2 iterations successfully.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turn on the LAN device in devicetree and add Kconfig item
RT8168_GET_MAC_FROM_VPD to support programming MAC address.
BUG=b:193750191
BRANCH=None
TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD.
Use 'ifconfig' to check if the MAC written successfully.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The Realtek RT8168 and RT8125 have a similar programming interface,
therefore add the PCI device ID for the RT8125 into driver for support.
BUG=b:193750191
TEST=emerge-brask coreboot chromeos-bootimage. Test on brask whose NIC
is RT8125. Check if the default MAC is written into the NIC.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Iaa4c41f94fd6e5fd6393abbb30bfc22a149f5d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207625007
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The VR configuration should be based on the different Soc SKU type. And
we also have different SKU in the same SA PCI ID.
Therefore, add TDP to recognize the correct SKU and give the correct
power setting.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the beadrix variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:204882915
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BEADRIX
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Guybrush uses secure counters to protect against High Definition (HD)
protected content rollback. These secure counters are hosted in TPM
NVRAM. Enable secure counters so that they are defined in PSP verstage.
BUG=b:205261728
TEST=Build and boot to OS in Guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM.
Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
High Definition (HD) protected content playback requires secure counters
that are updated at regular interval while the protected content is
playing. To support similar use-cases, define space for secure counters
in TPM NVRAM and initialize them. These counters are defined once during
the factory initialization stage. Also add
VBOOT_DEFINE_WIDEVINE_COUNTERS config item to enable these secure
counters only on the mainboard where they are required/used.
BUG=b:205261728
TEST=Build and boot to OS in guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM space.
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
On reboot if forced to redefine the space, it is identified as already
defined.
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
Change-Id: I915fbdada60e242d911b748ad5dc28028de9b657
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In next build phase, primus will exchange i2c port for touchscreen and cr50.
BUG=b:207834727
TEST=build pass
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207070967
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the taniks variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:207402720
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TANIKS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55
and Intel's doc #626774.
2. Set PsysPL2 and PsysPmax according to the conclusion in issue
b:193864533 comment#23 and comment#29.
BUG=b:193864533
BRANCH=none
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Copy function variant_update_power_limits from brya to set power limits.
Add function variant_update_psys_power_limits and copy the algorithm
from puff. Add structure system_power_limits and psys_config to define
and configure the psys power limits.
BUG=b:193864533
BRANCH=none
TEST=Build pass
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I183017068e9c78acb9fa7073c53593d304ba9248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
DVT schematic will exchange TPM_I2C3 to TPM_I2C1, that may need swap
TPM I2C with touchscreen I2C to avoid TPM I2C fall on muxed ISH I2C,
need change I2C map, sch amd GPIO map. b/196293623
BUG=b:207613972
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I26d059a7ea5a3fdf00de260214c00d3bba9aa7f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59580
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we may have either BIOS ACM or both BIOS and SINIT ACMs in CBFS,
the size of txt_heap_acm_element will be different. We cannot always
hardcode the size of ACM addresses array for two ACMs. If only the BIOS
ACM was included, the BDR parsing failed in TBoot due to invalid size
of HEAP_ACM element. Check if SINIT ACM is present in CBFS and push
properly formatted BDR region onto the TXT heap. Use two separate
txt_heap_acm_element structures with different lengths.
TEST=Boot QubesOS 4.0 with TBoot 1.8.2 on Dell OptiPlex 9010 with and
without SINIT ACM in CBFS and see that TBoot no longer complains on
the wrong size of HEAP_ACM element
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib0c37a66d96e1ca3fb4d3f665e3ad35c6f1c5c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Initialize the DPR register and check if SCLEAN needs to be run.
Allows to reliably boot the platform if ungraceful shutdown occured or
the memory controller has been locked by TXT.
TEST=Dell OptiPlex 9010 with Intel TXT enabled boots successfully
after 4s power button override or power cable unplug when SENTER was
executed. Successfully boot QubesOS 4.0 with TBoot v1.8.2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4b912f121593fa55c11813262f09be1a1055e950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for brya boards, therefore disabling it.
Fixes: 0e905801 (soc/intel: transition full control over PM Timer from
FSP to coreboot)
BUG=b:206922066
TEST=Boot gimble to OS and verify S0i3 counter incrementing after
exiting S0ix suspend states.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I8005dacd732c033980ccc479375ff5b06df8dac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59790
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Alder Lake code currently supports the PCH-M and PCH-P types, which
have some differences (so far, only the amount of PCIe I/O). Mainboards
can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which
PCH type they use: select the option to choose PCH-M, do not select the
option to choose PCH-P. While this works, it can be confusing once more
PCH types are added.
Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards
have to explicitly choose a PCH type. Also, use this option to restrict
the PCH-P defaults for PCH-dependent settings to avoid unintended reuse
of the PCH-P defaults when adding a new PCH type. To make sure only one
PCH type is selected, add some preprocessor in `bootblock.h` to provoke
a build-time error if this requirement is not met. Kconfig doesn't seem
to have a mechanism to describe sets of mutually-exclusive bool options
that allows said options to be selected (a `choice` block doesn't allow
its elements to be selected). Finally, adapt the ADL boards accordingly.
Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
The current implementations of edid_read() and segments_edid_read() have
a few problems:
1. The type of variable `c` is incorrect, not matching the return type
of sp_tx_aux_rd(). In addition, the meaning of `c` is unknown.
2. It is pointless to do `cnt++` when sp_tx_aux_rd() fails.
3. These two functions ignore the return value of
anx7625_reg_block_read().
4. In segments_edid_read(), anx7625_reg_write() might return a positive
value on failure.
Fix all of the 4 issues, and modify the code to be closer to kernel
5.10's implementation (drivers/gpu/drm/bridge/analogix/anx7625.c). Note
that, however, unlike in kernel, anx7625_reg_block_read() here doesn't
return the number of bytes. On success, 0 is returned instead.
In addition, following coreboot's convention, always return negative
error codes. In particular, change the return value to -1 for
edid_read() and segments_edid_read() on failure.
BUG=b:207055969
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: Ife9d7d97df2926b4581ba519a152c9efed8cd969
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This area is used for storing AP RO verification information.
BRANCH=none
BUG=b:141191727
TEST=built a guybrush firmware image and verified that the RO_GSCVD
area was indeed added:
$ dump_fmap /build/guybrush/firmware/image-guybrush.bin | \
grep -B3 RO_GSCVD
area: 25
area_offset: 0x00808000
area_size: 0x00002000 (8192)
area_name: RO_GSCVD
$
- verified that guybrush device boots fine with the new image.
Change-Id: Ifa24d5a6271a8bcbf737d4580ec85b9cfdd9af01
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57864
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this.
Patch for 5.10 kernel can be found at:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3289984
BUG=b:206850071
TEST=dump SSDT, see _HID instead of _ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If988ca94b6c70d08a7b07cc9f6bbb077fac84e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59731
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some boards may want to use a _HID instead of an _ADR to locate a
graphics device. This patch provides that option in the devicetree.
BUG=b:206850071
TEST=Add `hid` entry in devicetree, dump SSDT and see _HID instead of
_ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I32be4abf5c60be1f94aabaa2e9c734215c4e291e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested on Qemu/i440fx. The follow-up commit adds a config file to
buildtest it.
Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CPLD can be used for board revision determinition.
Remove info about selecting memory type and add Rev 1.4 info
BUG = N/A
TEST = NA
Change-Id: I4bc851f72ae03e98ab1b2e0e04b07ccf6135ebeb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Make BSD part of the coreboot commonlib accessible to libpayload.
Change-Id: I09f475d399ab785f3d3ffdb4b42950d2b397845e
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Fix the issue that power consumption of single rank DRAM is greater
than dual rank DRAM due to incorrect settings of rank1 CKE.
Set rank1 CKE to the correct state to fix this issue.
BUG=b:196867407
TEST=DUT can boot to OS.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: If336197aea4770dda1332b6e83da8ec9a4f9d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch drops unnecessary `pmc_ipc.c` from Makefile as this
file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection.
Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some herobrine variants have USB hub powered by discrete LDO that is
controlled by USB_HUB_LDO_EN gpio. Assert the GPIO on boot.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ia94e046f9eb0d3ce593f3445e0203a7391c14de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Krishna Prasad Bhat