Enable USB Port A on daughterboard for Taeko
BUG=b:216533764
TEST=emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I1a43c256757f3fc4b53ba1f794587d6a00ba0aa5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
On systems that use the first 128kByte of the SPI flash for the EC
firmware, it is not possible to place the EFS/amdfw part at the lowest
location in flash where the on-chip PSP firmware will look for the EFS,
since this is at an offset of 128kByte into the flash which is where the
cbfs master header resides when the main CBFS is placed right after the
EC firmware. This patch introduces the AMD_SOC_SEPARATE_EFS_SECTION
option that allows putting the EFS in a separate FMAP section that can
be located right after the EC firmware FMAP section. The EFS FMAP
partition is checked to ensure it begins at the expected location.
Change-Id: I5ed0f76c9c9c9c180ee5f1b96f88689d0979bb5e
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:192535692
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ia6089441dc1ba04c3f7427dda065b85bd295af0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mac Chiang <mac.chiang@intel.com>
I think this doesn't do anything on most architectures, but it should
still be there just in case. Found by Coverity.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I845a784d90f65610fd1e0d751ea13e9af5b970fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Post codes don't signify an emergency error, so they shouldn't be
classified as BIOS_EMERG. Now that loglevels are more visible, this
misclassification looks pretty glaring. This patch changes them to
BIOS_INFO which seems more appropriate for an informational code that is
expected to occur in the normal boot flow.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I85c8768232ae0cbf65669a7ee6abd538a3b2d5e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The patch selects USB2_PORT_MAX_TYPE_C macro for usb2 port#2 in
the device tree of Gimble DVT and Gimble EVT. The macro modifies the
USB2 configuration to indicate the port is mapped to Type-C and sets
Max TX and Pre-emp settings.
The change is required to enable port reset event on the USB2 port#2.
This event is passed to USB3 upstream ports to upgrade back to super
speed (USB3) after a downgrade during low power state. The change is
done for Gimble DVT and EVT boards.
BUG=b:193287279
TEST=Built coreboot for Gimble and tested type A pen drive detect as
super speed device on both the Type-C ports.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If54faa63a983c859bf26a6a779751a6c3c85c43d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61586
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch defines USB2_PORT_MAX_TYPE_C macro to allow mark the type_c
flag.The USB2_PORT_MAX_TYPE_C macro modifies the USB2 configuration to
indicate the port mapped to Type-C and sets Max TX and Pre-emp
settings. This is an extension to existing macro USB2_PORT_MAX.
The change is required to enable port reset event on a USB2 port.
This event is passed to USB3 upstream ports to upgrade back to super
speed (USB3) after a downgrade during low power state.
BUG=b:193287279
TEST=Build the code for Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I464f139d8e367907191c04f9170ac53d327776ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61623
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`PLATFORM_IFD2` macro is more generic tag that can be associated with
early next SoC platform development which using IFDv2.
The current assumption is that newer SoC platform still uses the same
SPI/eSPI frequency definition being used for latest platform(TGL, ADL)
and if the frequency definition is updated later, `PLATFORM_IFD2' will
use latest frequency definition for early next SoC development.
And once upstream is allowed for new platform, platform name will be
added in tool later.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I14a71a58c7d51b9c8b92e013b5637c6b35005f22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch implements `cse_control_global_reset_lock()` as per ME BWG
(doc: 627331) recommendation.
It is recommended that BIOS should set this bit early on in the boot
sequence, and then clear it and set the CF9LOCK bit prior to loading
the OS in both an Intel CSME Enabled and a Intel CSME Disabled system.
Note: For CSE-Lite SKUs BIOS should set CF9LOCK bit unconditionally.
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3894b2cd8b90dc033f475384486815ab2fadf381
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Nivviks P1 will also use Micron MT62F512M32D2DR-031 WT:B. Add it to the
parts list and regenerate the memory IDs using part_id_gen.
BUG=b:217095281
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I2b56b0844e70a2712923b197436dd2d668e58a27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
The implementation of clearing watchdog status is wrong in CB:58835.
The value written to the 'wdt_mode' register should be
'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'.
BUG=b:204229208
TEST=check watchdog status is cleared.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external
program (e.g., the "DRAM blob") to do the full DRAM calibration first,
then store and and apply the generated parameters to the reference
"fast DRAM calibration" in the vendor/mediatek folder for normal system
boot.
Starting with MT8186 the implementation of fast calibration may need
to be changed, and a "DRAM blob" only path is introduced for devices
that have to do both full and fast calibration using the external blob.
TEST=fast calibration pass on kingler/krabby
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add WiFi SAR table for taeko.
BUG=b:212405459
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I061dc798ae7177d05bc50648cfda46a3eec2c912
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Trackpad GPIO configuration does not align with the IRQ configuration
in the devicetree. Configure the trackpad GPIO to generate SCI on
falling edge.
BUG=None
TEST=Build and boot to OS in Nipperkin. Ensure the trackpad is
functional. Suspend the device and wake it using trackpad. Perform
suspend/resume sequence for 100 iterations.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If4324e09535d2676c8a8c6643604227eeaba0fe8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
For USB ports, we want to use custom PLD fields with more details to
indicate physical location. Custom PLD will also be added to other brya
variants in the future as we figure out physical port locations on those
devices. Type A port on MLB is removed since it is no longer used.
BUG=b:216490477
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Iea975a4f436a204d4edd19fad0f5652fb44c6301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
ADL and Sabrina have different advisory regarding encoding the bus
width. Encode the bus width as per the respective advisories.
BUG=b:211510456
TEST=Build spd_gen and ensure that the bus width is encoded as expected.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ia12a5bd8f70a70ca8a510ecf00f6268c6904ec25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Sabrina uses the same MMIO_CONF_BASE MSR as the previous AMD CPUs to
configure the PCI MMCONF base address.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e3064bab5ca1e277b04f9aae98f9adabce75399
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.
BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.
Entering PSP verstage S0i3 resume
tpm_setup failed rv:1
VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
Saving nvdata
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Now that PSP verstage can directly write to the UART, we no longer need
to manually dump the cbmem contents.
Ideally if we can get picasso to add support for mapping the UART, or
if we implement bit banging we can delete this functionality
completely.
BUG=b:215599230
TEST=Boot guybrush and verify verstage logs aren't printed twice
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id70b24625c3b2f3d6fe470cf227a0083f5b974f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This will allow PSP verstage to write logs to the serial console. We
are no longer dependent on using a serial enabled PSP boot loader.
Ideally we would delete this psp printk and use the standard printk.
Since picasso doesn't currently support mapping the UART though, I'll
keep it for now.
BUG=b:215599230
TEST=Boot guybrush and verify PSP logs are output on serial console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibd77cc754fae5baccebe7adc5ae0790c79236d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The Sabrina PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idad8e4874e78bb96730feecb5a7b17334d12217c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The Picasso PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=Build and boot morphius
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie1f033ff86ebb0f755a9a0b6ff293aa3c8bbbeb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This will allow directly using the UART console. On PSP releases that
don't support mapping the UART, we will just return NULL which is
perfectly acceptable.
BUG=b:215599230
TEST=Boot guybrush and verify verstage can print to the console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic8d7f0fe00794a715756f92e3fb32c6b512cb8aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61607
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
A common use case when running coreboot on production systems is that
only the CBMEM console (the one with the least impact on boot speed) is
enabled. In this case, some of the code in the console subsystem has no
effect. Due to the way it's all genericized over multiple consoles and
tied together with function pointers, not all of this can be
compile-time eliminated automatically, so this patch adds a little
helper to facilitate that. This results in roughly 200 (compressed)
bytes of savings per stage on an arm64 system.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1d5b8bda80d02a13ee0b7835e0805c4319fd21d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In order to provide the same loglevel prefixes and highlighting that
were recently introduced for "interactive" consoles (e.g. UART) to
"stored" consoles (e.g. CBMEM) but minimize the amont of extra storage
space wasted on this info, this patch will write a 1-byte control
character marker indicating the loglevel to the start of every line
logged in those consoles. The `cbmem` utility will then interpret those
markers and translate them back into loglevel prefixes and escape
sequences as needed.
Since coreboot and userspace log readers aren't always in sync,
occasionally an older reader may come across these markers and not know
how to interpret them... but that should usually be fine, as the range
chosen contains non-printable ASCII characters that normally have no
effect on the terminal. At worst the outdated reader would display one
garbled character at the start of every line which isn't that bad.
(Older versions of the `cbmem` utility will translate non-printable
characters into `?` question marks.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I86073f48aaf1e0a58e97676fb80e2475ec418ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch adds ANSI escape sequences to highlight a log line based on
its loglevel to the output of "interactive" consoles that are meant to
be displayed on a terminal (e.g. UART). This should help make errors and
warnings stand out better among the usual spew of debug messages. For
users whose terminal or use case doesn't support these sequences for
some reason (or who simply don't like them), they can be disabled with a
Kconfig.
While ANSI escape sequences can be used to add color, minicom (the
presumably most common terminal emulator for UART endpoints?) doesn't
support color output unless explicitly enabled (via -c command line
flag), and other terminal emulators may have similar restrictions, so in
an effort to make this as widely useful by default as possible I have
chosen not to use color codes and implement this highlighting via
bolding, underlining and inverting alone (which seem to go through in
all cases). If desired, support for separate color highlighting could be
added via Kconfig later.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I868f4026918bc0e967c32e14bcf3ac05816415e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I0aa456b8b4eec506fbb319293f0903b293325cb0
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I4665f2372ccd599ab835c8784da08cde5558a795
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In an attempt to make loglevels more visible (and therefore useful,
hopefully), this patch adds a prefix indicating the log level to every
line sent to an "interactive" console (such as a UART). If the code
contains a `printk(BIOS_DEBUG, "This is a debug message!\n"), it will
now show up as
[DEBUG] This is a debug message!
on the UART output.
"Stored" consoles (such as in CBMEM) will get a similar but more
space-efficient feature in a later CL.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic83413475400821f8097ef1819a293ee8926bb0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add FM350GL 5G WWAN support using drivers/wwan/fm and addtional PM
features from RTD3.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I6413f106ce6ef6c895d4861f4dbe26ac9a507d25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Support PXSX._RST and PXSX.MRST._RST for warm and cold reset.
PXSX._RST is invoked on driver removal.
build dependency:
soc/intel/common/block/pcie/rtd3
This driver will use the rtd3 methods for the same parent in the device
tree. The rtd3 chip needs to be added on the same root port in the
devicetree separately.
Test:
Add chip entry to the corresponding root port and check PXSX Device
is generated in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1e0b9fd405f6cfb1e216ea27558bb9299a09e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61354
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Optional feature to provide mechanism to skip _OFF and _On execution.
- It is used for the device to skip _OFF and _ON during device driver
reload.
- OFSK is used to skip _OFF Method at the end of device driver removal.
- ONSK is used to skip _ON Method at the beginning of driver loading.
- General flow use case:
1. Device driver is removed by 'rmmod' command.
2. Device _RST is called. _RST perform reset.
3. Device increments OFSK in _RST to skip the following _OFF invoked by
OSPM.
4. OSPM invokes _OFF at the end of driver removal.
5. _OFF sees OFSK and skips current execution and decrements OFSK so that
_OFF will be executed normally next time.
6. _OFF increments ONSK to skip the following _ON invoked by OSPM.
7. Device driver is reloaded by 'insmod/modprobe' command.
8. OSPM invokes _ON at the beginning of driver loading.
9. _ON sees ONSK and skip current execution and decrements ONSK so that
_ON will be executed normally next time.
- In normal case:
When suspend, OSPM invokes _OFF. Since OFSK is zero, the device goes
to deeper state as expected.
When resume, OSPM invokes _ON. Sinc ONSK is zero, the device goes
to active state as expected.
- Generated changes:
PowerResource (RTD3, 0x00, 0x0000)
Name (ONSK, Zero)
Name (OFSK, Zero)
...
Method (_ON, 0, Serialized) // _ON_: Power On
{
If ((ONSK == Zero))
{
...
}
Else
{
ONSK--
}
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
If ((OFSK == Zero))
{
...
}
Else
{
OFSK--
ONSK++
}
}
Test:
Enable and verify OFSK and ONSK Name objects and the if-condition logic
inside _OFF and _ON methods is added.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ic32d151d65107bfc220258c383a575e40a496b6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add L23 enter/exit, modPHY power gate, and source clock control methods.
DL23: method for L2/L3 entry.
L23D: method for L2/L3 exit.
PSD0: method for modPHY power gate.
SRCK: method for enabling/disable source clock.
These optional methods are to be used in the device ACPI to construct
flows with root port's power management functions.
Test:
Enable and verify DL23, L23D, PSD0, SRCK methods in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I79de76f26c8424b036cb7d2719df68937599ca2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add support to generate SPD binary for Sabrina SoC. Mainboards using
Sabrina SoC are planning to use LP5 memory technology. Some of the SPD
bytes expected by Sabrina differ from the existing ADL. To start with,
memory training code for Sabrina expects SPD Revision 1.1. More patches
will follow to accommodate additional differences.
BUG=b:211510456
TEST=make -C util/spd_tools.
Generate SPD binaries for the existing memory parts in
lp5/memory_parts.json and observe that SPDs for Sabrina is generated as
a separate set without impacting the ADL mainboards.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2a2c0d0e8c8cbebf3937a99df8f170ae8afc75df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=b:201818726
TEST=build FW and system power on.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I881ded944530b21d1c5e306089d32387c9c258b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
- set GPSE-77 (Maxim jack detect) to NC for variants using Realtek audio
- set GPSW-37 to NC for all variants (not used for LPE audio)
- set GPSW-95 (Realtek jack detect) to NC for variant using Maxim audio
- set GPSE-77 as maskable on variant using Maxim audio, to match mask setting
for jack detect GPIO on other variants
- set GPSE-81 as maskable on CELES to prevent interrupt storm (likely due to
change in cherryview pinctrl driver circa kernel v3.18 which no longer masks
all interrupts at init)
Change-Id: I50d4b3516eba8906042bb8dea768b229afcf11ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add ID "AMDI5619" for machine driver to support ALC5682I-VS + ACL1019
combination.
BUG=b:211835769
TEST=Build dewatt, codec is functional with new machine driver.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic6cb3bda7b8f1b96485f7b868200c94e6c720c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com>
This will allow coreboot to directly write to the UART controller.
BUG=b:215599230
TEST=Try mapping the uart on guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibd346cec2994e612f2901bb91d572982ce2ed5e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
The patch defines enum values for small and big cores and uses them
to indicate the big or small core.
TEST=Verify the build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I740984a437da9d0518652f43180faf9b6ed4255e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Joey Peng