This patch moves TCSS firmware latency related macros from
`tcss_pcierp.asl` to SoC specific `tcss.h`.
TEST=Able to build and boot Google/Kano.
Change-Id: I96db2dbf050c8f09e4d9c4018a2caa286f7ef1d1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70485
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `soc_read_pmc_base()` function returns an `uintptr_t`, which
is then casted to a pointer type for use with `read32()` and/or
`write32()`. But since commit b324df6a54 ("arch/x86:
Provide readXp/writeXp helpers in arch/mmio.h"), the
`read32p()` and `write32p()` functions live in `arch/mmio.h`.
These functions use the `uintptr_t type for the address parameter
instead of a pointer type, and using them with the
`soc_read_pmc_base()` function allows dropping the casts to pointer.
BUG=none
TEST=Build and Boot verified on google/rex
Port of 'commit f585c6eeea ("soc/intel: Drop casts
around `soc_read_pmc_base()`")'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I914190f2d2d0507c84b19340159990f9b62ce101
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70272
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way
to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer`
CMOS option to allow enabling and disabling the 8254 timer without
having to rebuild and reflash coreboot. If options are not enabled or
the option is missing in cmos.layout, the Kconfig setting is used.
BUG=none
TEST=Build and Boot verified on google/rex
Port of 'commit bc35bed18e ("soc/intel/*: Allow configuring
8254 timer via CMOS")'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ibf6c43ddecb3da325c22228205243bb6af00d1d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70423
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch fixes the `unknown` voltage field issue in processor SMBIOS
table.
This patch is backported from
commit 30e8fc1f4e (soc/intel/alderlake:
Fix unknown voltage in SMBIOS)
TEST=Able to see meaningful voltage data in the SMBIOS table.
Without this patch:
localhost ~ # dmidecode -t 4
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0004, DMI type 4, 48 bytes
Processor Information
Socket Designation: CPU0
Type: Central Processor
Family: Pentium Pro
...
Voltage: Unknown
With this patch:
localhost ~ # dmidecode -t 4
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0004, DMI type 4, 48 bytes
Processor Information
Socket Designation: CPU0
Type: Central Processor
Family: Pentium Pro
...
Voltage: 0.8 V
Change-Id: I0cd7c1e3c0746309600e4480f4822a4d72147041
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70424
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The validation process verifies that hardware components comply with
the standard hardware specifications. For instance, PCI express
implementation must comply with the hardware PCIe specification
requirements: Electrical, Configuration, Link Protocol and Transaction
Protocol. To perform these tests the hardware must be configured in a
particular state: some feature related to power management need to be
turned off, hot plug should be enabled...
This patch sets the appropriate FSP Updateable Product Data flags to
get the hardware in the proper configuration:
- Enable PCIe hotplug on all ports
- Set clock sources to run free
- Set the FSP compliance test mode flag
This patch is backported from
commit 096ce1444e (soc/intel/alderlake:
Support PCIe hardware compliance test mode)
Change-Id: Idd7a1adf0f53b014093ba70fee599dbb7887a0fc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70416
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When an enabled root port without pcie_rp clock being specified, the
empty structure provides invalid info, which indicates '0' is the
clock source and request. If a root port does not use clock source, it
should still need to provide pcie_rp clock structure with flags set to
PCIE_RP_CLK_SRC_UNUSED. If flags, clk_src, and clk_req are all '0', it
is considered that pcie_rp clock structure is not provided for that
root port.
Add check and skip PCIe CLKSRC programming without a clock structure.
In addition, a root port can not use a free running clock or clock set
to LAN.
Note that ClockUsage is either free running clock, LAN clock, or the
root port number which consumes the clock.
This patch is backported from
commit edf71a08b4 (soc/intel/alderlake:
Skip PCIe source clock assignment if incorrect)
Change-Id: Ie9179880a57796d8595874325203280590d7ee9d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70415
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In some cases, partner may assign same clkreq on more than one devices.
This could happen when one device is in baseboard dev tree and another
one is in override dev tree.
This change adds a clkreq overlap check and shows a warning message.
This patch is backported from
commit ff553ba8b3 (soc/intel/alderlake:
Check clkreq overlap)
Change-Id: Ifc1c57578eca376685196ad497d9db825d63aa76
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70414
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures to be able to drive SYS_SLP_S0IX_L `low` based
on the state of the system while `SLP_S0_L` signal is `low` (while
the system is in S0ix).
Implemented runtime ASL method (MS0X) being called by PEPD device
_DSM to configure `SLP_S0_GATE (GPP_H14)` PIN at S0ix entry/exit.
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One))
{
\_SB.PCI0.CTXS (0x75)
}
Else
{
\_SB.PCI0.STXS (0x75)
}
}
BUG=b:256807255
TEST=Able to see SYS_SLP_S0IX_L goes low in S0ix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie6b5e066f228ea5dc79ae14dd803fc283fd248ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70196
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the amdblocks/gpio.h and soc/gpio.h includes with the common
gpio.h which will include soc/gpio.h which will include amdblocks/gpio.h
in the AMD SoC case.
Since baseboard/ec.h and indirectly baseboard/gpio.h files will get
included in the DSDT, the soc/gpio.h includes in those aren't replaced
with a gpio.h include for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib982e338b5c6bc145ec1a8f6dd75175a42dfb426
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70436
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the amdblocks/gpio.h and soc/gpio.h includes with the common
gpio.h which will include soc/gpio.h which will include amdblocks/gpio.h
in the AMD SoC case.
Since baseboard/ec.h and indirectly baseboard/gpio.h files will get
included in the DSDT, the soc/gpio.h includes in those aren't replaced
with a gpio.h include for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa82c10d10e4438b0437b78ddd95b5e823805571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70435
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds MTL-P board id definition. Change include,
1. Add board_id.c implementation
2. Add board_id.h implementation
3. Add board_id config in variants.h
4. Makefile changes
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I90b0543d5db208f696d2c2c2dc3d2581514a845b
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66102
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch adds the initial code for mtlrvp_p_ext_ec variant board
which includes
1. support for 2 mainboards (Chrome EC and Windows EC) by
adding overridetree.cb to corresponding directory
2. Move devicetree to baseboard/mtlrvp_p
3. Update mainboard name in Kconfig and Kconfig.name
4. Add config option to select corresponding overridetree.cb
Subsequent patches include patch train starting from (CB - 66102)
BUG=b:260654043
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I83948aa5e9fcaadee4745e313360773c48142f89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
selfboot.c blocks the payload that does not target RAM. But MT8173 loads
and runs BL31 payload in SRAM. Make the exception by implementing
`payload_arch_usable_ram_quirk()`.
TEST=load and initialize BL31 successfully
Change-Id: I8951b1c4673cdae7d1ad0c11d7d6c12376acd328
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70344
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the bit fields in the FW_CONFIG for Proto Phase.
BUG=b:254404046
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=marasov emerge-brya coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ia71269918092655c11c2b37a26ec19123f759650
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Found using 'Wmissing-include-dirs' command option.
Change-Id: Ia6f72acf0ae90c98ccf1fbbeedd7fbf5f194b4cc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70385
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable LPC SPI DMA. This helps with ~20ms boot time improvement while
loading various components synchronously.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Observe a boot time
improvement of ~20 ms.
Before:
Total Time: 1,503,032
After:
Total Time: 1,485,536
Change-Id: I4dd57d46ae9bd664d57178d34b5beda872ed2cdb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70383
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
INSTALL and PREFIX variables will not be overwritten. Also, mkdir was
replaced by a tool from the INSTALL variable to be compatible with other
cross-compilation buildsystems (like Yocto).
Overwriting variables generates problems when we use different
buildsystem like Yocto where tool names are stored in environment
variables. This change may make building the utility easier - the user
of different buildsystem will not have to remember to pass correct tool
names when issuing the make command.
Also, this change does not affect the rest of users - if the variable
was not set before, then it will be configured as before.
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Change-Id: Ia8dd67d18392e1e11d9160b187ef1a874d69ff5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70105
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use tool from INSTALL variable to create directory instead of mkdir to
be compatible with other cross-compilation buildsystems (like Yocto).
Signed-off-by: Maciej Gabryelski <maciej.gabryelski@3mdeb.com>
Change-Id: I0b0949d07baae1ae1d7b22ac3d0b8913f81d89c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70104
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use tool from INSTALL variable to create directory instead of mkdir to
be compatible with other cross-compilation buildsystems (like Yocto).
Signed-off-by: Maciej Gabryelski <maciej.gabryelski@3mdeb.com>
Change-Id: I9d455f3d1a6d86c88b8e22da825fe14f9630e971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70103
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Build variables like CC, INSTALL, and PREFIX, should not be
overwritten by the Makefile. This generates problems when we use
different buildsystem like Yocto where tool names are stored in
environment variables. This change may make building util tool
easier - the user of different buildsystem will not have to remember
to pass correct tool names during running the make command.
Also, this change does not affect the rest of users - if the variable
was not set before, then it will be configured as before.
Signed-off-by: Maciej Gabryelski <maciej.gabryelski@3mdeb.com>
Change-Id: If5c88bde0ae00f0211a250906cbdedfe4f59c67b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70102
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the __weak qualifier as this function is not overridden.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ica25b2bc4325ff9d27be672926b4e3b550c86e96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Add Memory Error Section definitions from UEFI Specification rev 2.10
appendix N.2.5. The structure defined here may be used for machine
check handling.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I0a165350a16a4cbe4033a3e7c43fa23a5b27c44b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The original version of the mem_chip_info structure does not record rank
information and does not allow precise modeling of certain DDR
configurations, so it falls short on its purpose to compile all
available memory information. This patch updates the format to a new
layout that remedies these issues. Since the structure was introduced so
recently that no firmware using it has been finalized and shipped yet,
we should be able to get away with this without accounting for backwards
compatibility.
BRANCH=corsola
Cq-Depend: chromium:3980175
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If34e6857439b6f6ab225344e5b4dd0ff11d8d42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68871
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
Replace the amdblocks/gpio.h, amdblocks/gpio_defs.h and soc/gpio.h
includes with the common gpio.h which will include soc/gpio.h which will
include amdblocks/gpio.h which will include amdblocks/gpio_defs.h in the
AMD SoC case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I37a33dd8821a00b7edfd1e5b593f71bea0e77630
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70434
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Replace the amdblocks/gpio.h, amdblocks/gpio_defs.h and soc/gpio.h
includes with the common gpio.h which will include soc/gpio.h which will
include amdblocks/gpio.h which will include amdblocks/gpio_defs.h in the
AMD SoC case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I13bc33b91f6e6d52867da9043bb386f3befac5fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70433
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81f3a38344f91cecb4fe5431ed211834e5ed599c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69897
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I419fef73d2881e323487bc7fe641b2ac4041cb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
DTTS indicated Dynamic Thermal Table Switching.The proposal would like
to develop the schematic for switching 6 thermal table by lid status,
machine body mode and temperature. After entering the OS, the thermal
table would be table A. If the “Motion” or “Lid status change” is
detected. The thermal table would switch to laptop mode or lid close
mode.
Once the higher environment temperatures are detected,the thermal
table would switch to the corresponding power throttle table (B, D or
F). Based on these table switching mechanisms, no matter how the
end-user uses Chromebook,they could enjoy more humanized thermal
designs.
Release Over Over Release .
Temp. Temp. Temp. Temp. .
-------------------------------------------------------- .
Desktop mode Table A Table B 50C 45C .
Lid open (Default) .
-------------------------------------------------------- .
Desktop mode Table C Table D 55C 50C .
Lid close .
-------------------------------------------------------- .
Laptop mode Table E Table F 45C 40C .
-------------------------------------------------------- .
On the proposal, the transmission rules are list below:
1. Table A is the default table after booting.
2. A, C, E (Release Temp) can switch to each other.
3. B, D, F (Over Temp) can switch to each other.
4. A and B, C and D, E and F can switch to each other.
5. If Lid open/close or mode switch event trigger, temperature release
tables will translation to each other, temperature over tables will
translation to each other.After that event trigger, EC will check the
new temperature condition and decide if the temperature need to be
trigger.For example, if table A will switch to table D, table A will
switch to C with Lid close event, if temperature is over 55C, EC will
trigger temperature to switch form table C to D.
6. EC will trigger 3 times body-detection events during power on boot
without any body-mode and lid status change. For this case if the
previous table label is on same group, we will based on the temperature
to decide the table.
For example, assume table A is current table. When the temperature
reaches 50C, than the table is switched from A to B. The current table
is B. When the temperature is downgrade below 45C, the table is
switched form B to A. The same rule is for C and D, E and F.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I866e5e497e2936984e713029b5f0b6d54cbc9622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Subrata Banik