We set up L2 cache early in romstage now so the old
function is now redundant.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Icec93810ddd7feb48286d4b600cb2d58af38b7ef
Reviewed-on: https://gerrit.chromium.org/gerrit/65428
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit bb91f1078ea55a7c8bdc19336cef2ec9a5f4511f)
exynos: stack size: Increase the stack size to 16KB.
The lzma decoding function in the RAM stage allocates nearly 16KB on the stack
which is shared between the bootblock, rom stage, and ram stage. The stack had
been much too small and needed to be expanded.
Old-Change-Id: I1b74fff9b54e506320d58956b779b3a102e66868
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65937
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 243d8a80f68dd257ecc5b4e19614bc7f0f5d398b)
exynos: gpio: add a bigger delay when reading board strappings
Z-state pins were not reading reliably with a 5us delay, so increase
it to 15us.
This is ported from https://gerrit.chromium.org/gerrit/64338
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ife6ea2ef5989e1a4c17913278ab972f0fd7f7f35
Reviewed-on: https://gerrit.chromium.org/gerrit/65727
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 76f0f8203f1af3f461745cefcc94e97c422d9084)
exynos5420: enable DMC internal clock gating
lets enable memory controller internal clock gating for ddr3.
with these bits enabled we save some power out of ddr3.
This is ported from https://gerrit.chromium.org/gerrit/#/c/60774
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I2f9b0d78483b3ea7441f54a715c7c1e42eda3f7f
Reviewed-on: https://gerrit.chromium.org/gerrit/65728
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 022a81c44e655a9f81e974e730c0cecc1f048781)
exynos5420: Correct the 600MHz PMS value
In UM ver0.02, 600MHz clock PMS values differs from what is programed
currently. Though this also results in 600MHz clock, but it is better to
match what UM says. This patch chnage this as per UM
This is ported from https://gerrit.chromium.org/gerrit/#/c/65106/3
(Note: we already used the correct 600MHz value for KPLL)
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I6786815ab33427a23436e6ee37295f6c37dcd3d5
Reviewed-on: https://gerrit.chromium.org/gerrit/65726
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ceabf57ca78449fa6e9cfd212bdf4774706de92f)
Squashed five commits pertaining to exynos.
Change-Id: I3fd894aed15b8cd161c30904a46dac7e07eb8992
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6425
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(Clone of Falco change Ie2111e4bb70411aa697dc63c0c11f13fbe66c8d8)
Old-Change-Id: I5feba8fdbafba6d2de9f7d3de6170defc0d45a32
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66536
Reviewed-by: Dave Parker <dparker@chromium.org>
(cherry picked from commit b78a872a6647d7bb82f6c06a75e4075e451a1622)
peppy: Disable unused clocks
CLKOUT for PCIE ports 2-5 and CLKOUT_XDP are not used
and can be disabled.
This change was modled after the change made in Falco:
Falco-Change-Id: I0f996e90f0ae42780de3a0c8dc5db00ec600748b
The only difference per schematic for Peppy was PCIe 1 supports
a NGFF interface. PCIe 0 is connected to WLAN.
Old-Change-Id: Ib4871cb2655316cb260ab33ada6b9d81f271377f
Signed-off-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66693
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 8f12335013a510dee3c21b55251ab00c0fbac609)
Squashed two related commits.
Change-Id: Ibc5b902018eec07fdccaa8c6cb066ce918f6a6b5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6419
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There seem to be a significant number of shutdowns during suspend resume
tests related to critical temperatures. It is possible that we are getting
a bad reading from PECI and shutting down prematurely in some cases.
If we get a reading that is above critical then wait for the EC to re-poll
and then re-check the temperature in case it was just a bad reading.
Also add some ACPI debug messages when this happens.
Original-Change-Id: I0ab7bdcc50d133981c0f36fc696b06d4a1d939a7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66937
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a39d7b11dd7b2af37fc2658542d56b32e3966ed4)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ib612266511d90749ec6507f8467c71523ee8fb95
Reviewed-on: https://chromium-review.googlesource.com/66939
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit e98da983dca7819490464bddf08b9c53f28d2712)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6457
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All modes tested on X201.
Change-Id: I23df81523196ea3f5fdb10eb04f4496c00aaeb9f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: I9aa3652d1b92cece01d024e19bdc065797896001
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6470
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The SMP on Exynos 5420 requires setting a special page and entry wrappers in
firmware side (SRAM) so kernel can start cores (and to switch clusters).
Change-Id: I77ca98bb6cff5b13e95dd29228e4536302f0aee9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64770
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit 4a11c7ab78cc0811df0f88763b0af8b9f24e5433)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6405
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
All other Kconfig files at the mainboard vendor level have a comment
on "endif" matching the corresponding "if", except these two.
Change-Id: Ib03c4552c670178d6b09a2ca3037ee29e3524a2f
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6396
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This moves the call to setup_power() before system_clock_init().
This causes the PMIC to set up the voltage rails earlier so that
the CPU clock can be set up at a faster rate (in the follow-up
patch). After system clock init, we re-initialize the PMIC's I2C
bus since the input clock rate will have changed.
Old-Change-Id: Ieb828ac25daad7ee95bfa4823aaaf161028c9c92
Reviewed-on: https://gerrit.chromium.org/gerrit/64744
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 6c133a84ef4a32c35577a266905e02af8c2d9278)
pit: save setup_power() status and die later if needed
Since system clock and console initialization now happen after power
setup, we cannot print error messages in setup_power(). This patch
re-factors the code a little bit to save the status of setup_power()
so that if we get an error during setup_power() we will wait until
we can actually print something before dying.
Old-Change-Id: Id7ff477224b104b3c7e221c1d2df460ca9125f3b
Reviewed-on: https://gerrit.chromium.org/gerrit/65009
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 0c89f922b20bc1291ac7ba7b2c22bdce911be7a4)
Squashed two closely related commits.
Change-Id: I3efe29412738959e698c89d26e682536ceabdff8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6403
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Based on X60 counterpart.
Change-Id: I1556f75db08edf47c9313dae91072335240d46ad
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4780
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This makes S3 work.
Change-Id: Ife14372f5f9bb151d7e6e98c6069eb99d5369baf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6392
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Based on damo22's work and my X230 tracing.
Works for my X230 in a variety of RAM configs.
Also-By: Damien Zammit <damien@zamaudio.com>
Change-Id: I1aa024c55a8416fc53b25e7123037df0e55a2769
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5786
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The only remaining purpose for get_bus_conf() was to fill in obscure
bus_sb800 (etc.) arrays containing partial PCI bus enumeration. Complete
enumeration is available in devicetree and PCI configuration space so
discard these arrays.
Change-Id: I733115940afba3a50c58aedb9a04ecf5082b1234
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6360
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Previously MP table contained PCI_INT entries for PCI bus behind bridge
0:14.4 even if said PCI bridge function was disabled.
Remove these as invalid, indeterminate bus number could cause conflicts.
PCI_INT entries with bus_sb800[2], bus_hudson[2] and bus_yangtze[2]
were invalid as there is no PCI bridge hardware on device 0:14.0.
Remove these as invalid, indeterminate bus number could cause conflicts.
Change-Id: Ie6a3807f64c8651cf9f732612e1aa7f376a3134f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6358
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
MP table should be complete with IRQ routing information even
when we have ACPI tables.
Change-Id: Ieeaed442aea6217f4477b7ac7e06a1926eec8996
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6361
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Control for XHCI was split to handle AMD_INIT_RESET in agesawrapper
while AMD_INIT_ENV was already handled as part of BiosCallouts.
OEM configuration is supposed to be implemented as part of BiosCallouts,
leaving agesawrapper agnostic of platform details.
TODO: S3 resume for XHCI1.
Change-Id: Id5e9c25a227db4d821f1be4b176470547ca4ea84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6241
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Integrated PCI devices in southbridge silicon have static BDFs,
no need to have variables to store the parent bus or an offset
with constant zero.
Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Only references to bus_rd890, bus_sp5100 and bus_sr5650 were
in code sections that had been commented out.
Change-Id: If5552c409ce948c494345f49dbaad790b398bff8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6331
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Only ever used as lvalue (except when incrementing) so this global
is unused.
Change-Id: I616721f937eb0bfdb28f356284efd70f99ccd2dd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6330
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Do not use a global as the value gets discarded anyway.
Change-Id: I86aac304e073f0d74b011548d079e139891ec140
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6329
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Currently cbmem_recovery is done in raminit only on non-S3-resume path
do it on both paths to reduce confusion.
Change-Id: I16161ad449b9802a855fcf834aa721f4f65c0bb4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5954
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Provide proper header and function type-signatures for Super I/O
romstage component.
Fix mainboard's bogous romstage component to match.
Change-Id: Icd02199690d0c428b2daadf702d50714dc367692
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5924
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
